Sei sulla pagina 1di 3

Chemrite FC – 200 Page 43 of 3

Chemrite FC - 200
High Range Water – Reducing and Accelerating Concrete Admixture
_______________________________________________________________________________
Product Description Chemrite FC-200 is used as a highly effective water-
reducing agent and accelerating superplasticizer for the
production of high quality concrete. The dual action of
Chemrite FC-200 promotes greator degree of workability,
accelerated hardening alongwith high early and ultimate
strengths.
_______________________________________________________________________________
Uses As a substantial water-reducing and workability agent,
Chemrite FC-200 is used in:
-- Bridges, Piles & Pile Caps.
-- Beams, Slabs and large Foundations
-- Retaining Walls and Columns
-- Pre-stressed concrete
-- Pre-cast concrete elements
-- Slender components with densely packed
reinforcement.
_______________________________________________________________________________
Advantages Chemrite FC-200 provides the following advantages:
-- Substantial increase in slump without increased water
-- Accelerated hardening after setting
-- Significant increase of early and ultimate strengths
-- Increased water tightness
-- Improved surface finish
-- Reduced shrinkage and creep
-- Chloride-free, does not attack reinforcement
_______________________________________________________________________________
Test Standards Chemrite FC-200 complies with ASTM C-494
Types A, D & F.
_______________________________________________________________________________

Product Data
_______________________________________________________________________________
Type Melamine based formulation
_______________________________________________________________________________
Form Brown liquid
_______________________________________________________________________________
Chemrite FC – 200 Page 44 of 3

_______________________________________________________________________________
Packaging 200 Lit. drums. Bulk supply in tanker trucks is possible on
demand.
_______________________________________________________________________________
Storage Condition Store in a dry area between 5°C and 35°C. Protect from
direct sunlight.
_______________________________________________________________________________
Shelf Life 12 months minimum from production date if stored
properly in original unopened packaging.
_______________________________________________________________________________

Technical Data
_______________________________________________________________________________
Density at 25°C 1.18 ± 0.01 Kg/Lit
_______________________________________________________________________________
pH value Approximately 8
_______________________________________________________________________________
Chloride Content Nil (EN 934-2)
_______________________________________________________________________________

Application Detail
_______________________________________________________________________________
Dosage 0.8 – 2.0% by weight of cement. It is advisable to carry out
trial mixes to establish the exact dosage rate required.
_______________________________________________________________________________
Dispensing Chemrite FC-200 can be added to the gauging water prior
to its addition to the dry mix or separately to the freshly
mixed concrete (on the batching plant or at site into the
truck mixer).
_______________________________________________________________________________
Concrete Placing The standard rules of good concreting practice (production
as well as placing) must also be observed when using
Chemrite FC-200.
_______________________________________________________________________________
Curing Fresh concrete must be cured properly, especially at high
ambient temperatures in order to prevent plastic and drying
shrinkage. Use Chemcure products as curing agents.
_______________________________________________________________________________
Chemrite FC – 200 Page 45 of 3

_______________________________________________________________________________
Compatibility Chemrite FC-200 is compatible with:
-- Ordinary Portland cement
-- Silica Fume, Fly Ash and Slag
-- Sulphate resistant cement.
-- Pre-trials are recommended if combinations with
the above products are being made.
_______________________________________________________________________________
Cleaning Clean all equipment and tools with water immediately after
use.
_______________________________________________________________________________
Remarks When accidental overdosing occurs, the setting times are
affected. During this period, concrete must be kept moist in
order to prevent premature drying out.
_______________________________________________________________________________

Safety
_______________________________________________________________________________
Precautions 1. Accidental splashes to the skin must be washed off
with water and soap.
2. Accidental splashes to the eyes must be rinsed with
clean warm water. Seek medical attention without
delay.
_______________________________________________________________________________
Toxicity Non-toxic.
_______________________________________________________________________________
Transportation Non – hazardous.
_______________________________________________________________________________

Potrebbero piacerti anche