Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The FHB II Highbond system is a The first system worldwide with the Capsule and injection system for cracked
bonded expansion anchor with a unique Power Sleeve Technology. Due and non-cracked concrete, water-filled
conical anchor rod for maximum loads to the advantages of expansion, the and diamond-drilled drill holes.
and maximum safety in cracked conical geometry of the sleeve achieves
With variable anchorage depths from
concrete. better introduction of loads into the
4 x ds to 20 x ds with FIS SB injection
concrete.
The first system with which either the mortar.
FIS HB injection mortar or FHB II-P resin Very high load level in cracked and non-
RSB resin capule is the first resin capsule
capsule or FHB II-PF resin capsule (fast- cracked concrete with a high degree of
worldwide with approval for standard
curing: at + 20 °C after safety.
threaded rods RLM in cracked concrete.
2 min. full strength) can be used at the
Maximum comfort in planning and
same capacity. Extremely wide range of application
installing due to approval for hammer-
temperatures: - 40 °C to + 150 °C.
Smallest edge distances and spacings and diamond-drilled as well as damp or
Anchor installation still at - 30 °C with
are feasible. water-filled drill holes.
RSB resin capsule.
Stair railings Steel beams Steel constructions Crash barriers Silo installations High racks
Façade substructures Balcony railings Steel beams Substructures Noise barriers Heavy steel constructions
ETA-05/0164 - ETAG 001-05 Option 1 ETA-12/0160 - ETAG 001-05 Option 1 ETA-12/0258 - ETAG 001-05 Option 1
Highbond dynamic is a bonded The UMV dynamic is a bonded The FIS EM epoxy mortar is the
expansion anchor for cracked concrete expansion anchor for cracked concrete specialist for post-installation rebar
with a conical anchor rod, which is used with a conical anchor rod, which is used connections and extreme applications
with FIS HB injection mortar. with the UMV resin capsule. Approved in cracked and non-cracked concrete.
Approved for anchoring predominantly for anchoring predominantly non-static
The very high bond strength allows for
non-static (dynamic) tumescent and (dynamic) tumescent and alternating
applications in water-filled and
alternating loads. loads.
diamond-drilled drill holes.
Design in highly corrosion-resistant The annular gap in the fixture is closed
The extremely low shrinkage of the
steel, approved for applications in with a clamping bush.
mortar makes FIS EM ideal for very
aggressive atmospheres, e.g. tunnels.
large drill hole diameters and for large
Special shear load version FHB dyn V drill hole depths.
for applications with particularly high
shear loades.
Sign structures Transmission towers Manufacturing robots Manufacturing plants Post-installed rebar connections Heavy steel constructions
Manufacturing robots Jet fans Jib cranes Lift guide rails Bridge railings Rail fastening
See ICC-ES
Evaluation Report
at www.ic-es.org
Institut für Massivbau Institut für Massivbau Institut für Massivbau
Technische Universität Technische Universität Technische Universität
Darmstadt Darmstadt Darmstadt Inspection agency:
ESR-1990 IEA (AA-707)
0756
* fischerwerke GmbH & Co. KG
10, 09
0756-CPD-0324
0756-CPD-0304
ETA-10/0012 - ETAG 001-05 Option 1
ETA-09/0089 - ETAG 001-05
for rebar connections
FIS EM
fischer bonded anchor systems.
The right solution for all fastening questions.
The FIS V injection system is the all- The FIS VT injection system is the right The R resin anchor is a capsule system
round talent for all important building choice for all standard applications in which has been proven a million times.
materials and almost all tasks in non- non-cracked concrete and masonry.
The RM pre-portioned resin capsule is
cracked concrete, masonry and
Can be used when the focus is not on very easy to use and is particularly
reinforcement.
high loads. suitable for overhead installations and
Additional versions FIS VW with short water-filled drill holes.
curing times and FIS VS with extended
curing times are available.
Wide range of accessories for almost all
applications.
Rescue ladders Silos High rack storage Air conditioners Column bases Pumps
Column bases Steel constructions High racks Awnings High racks Crash barriers
See ICC-ES
Evaluation Report
at www.ic-es.org
Institut für Massivbau
Technische Universität
Darmstadt Inspection agency:
ESR-1990 IEA (AA-707)
0756
0756 0756
* fischerwerke GmbH & Co. KG * fischerwerke GmbH & Co. KG * fischerwerke GmbH & Co. KG
10, 02, 08 08, 12 08
0756-CPD-0361 0756-CPD-0302
0756-CPD-0301 0756-CPD-0300
0756-CPD-0483
0756-CPD-0303
ETA-10/0383 - ETAG 029 masonry ETA-08/0061 - ETAG 001-05 option 7
ETA-02/0024 - ETAG 001- 05 option 7 ETA- 08/0010 - ETAG 001-05 Option 7
ETA-12/0180 - ETAG 029 masonry
ETA-08/0266 - ETAG 001- 05
for rebar connections FIS VT R
FIS V
FIS P Plus References
The injection mortar with approval for
anchoring in masonry
Kranhaus Köln
Apartment buildings
in Germany
Product: FHB II
Can be used when the focus is not on Products: FIS EM, FIS A
high loads.
National Stadium
in Poland
Product: FHB II
0756
* fischerwerke GmbH & Co. KG
12
0756-CPD-0424
FIS P Plus
In-house development and
production of chemical building
products
Excellent processes
In 2008, the fischer plant for
chemical products became
"Factory of the Year" in the "German
Global Excellence in Operations
Award". In production and logistics,
lean and waste-free processes
based on the philosophy of the
fischer process system, and the
great dedication of our employees,
ensure a needs-oriented, fast and
seamless supply to our customers
worldwide.
Design and construct steel and bonded anchors safely and efficiently
without great effort.
An automatic calculation gives immediate information on the effect of your
change.
The user-friendly Windows Vista interface enables use without the need
for lengthy training.
Using 3D navigation, you can easily rotate, pan, tilt and zoom designs in
the space.
An automatic wizard provides support with detailed instructions.
Verifiable printout.
Free downloads and updates at www.fischer.de
As a reliable partner, we will always offer you support for your individual requirements
through advice and action:
Our products range from chemical systems and steel anchors through to plastic anchors.
Chemical Comparison Chart · 03/2013 · Printed in UK · Right to make technical changes reserved