Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1CH Digital
Home Theater System
Model Name : HT-C550
Model Code : HT-C550/XAX
Speaker PS-C550
Front PS-FC550
Center PS-CC550
Rear PS-RC550
Subwoofer PS-WC550
SERVICE Manual
1. Precaution
2. Product Specification
4. Troubleshooting
6. PCB Diagram
7. Schematic Diagram
HT-C550
Refer to the service manual in the GSPN (see the rear cover) for the more information.
GSPN (Global Service Partner Network)
Area Web Site
North America service.samsungportal.com
Latin America latin.samsungportal.com
CIS cis.samsungportal.com
Europe europe.samsungportal.com
China china.samsungportal.com
Asia asia.samsungportal.com
Mideast & Africa mea.samsungportal.com
1. Precaution
1-1 Safety Precautions............................................................................................ 1-1
1-2 Servicing Precautions.......................................................................................1-3
1-3 Precautions for Electrostatically Sensitive Devices (ESDs)..............................1-4
2. Product Specification
2-1 Product Feature................................................................................................ 2-1
2-2 Specifications....................................................................................................2-2
2-3 Specifications Analysis......................................................................................2-4
2-4 Accessories.......................................................................................................2-7
4. Troubleshooting
4-1 Checkpoints by Error Mode..............................................................................4-1
4-2 Measures to be taken when the Protection Circuit operates............................4-17
4-3 MICOM, MPEG Initialization & Update.............................................................4-18
4-4 Buyer-Region Code Setting Method.................................................................4-21
6. PCB Diagram
6-1 Wiring Diagram................................................................................................. 6-1
6-2 FRONT PCB Top............................................................................................... 6-2
6-3 FRONT PCB Bottom.........................................................................................6-4
6-4 KEY PCB Top....................................................................................................6-5
6-5 KEY PCB Bottom.............................................................................................. 6-6
6-6 MAIN PCB Top.................................................................................................. 6-8
6-7 MAIN PCB Bottom............................................................................................ 6-11
6-8 SMPS PCB Top................................................................................................. 6-12
6-9 SMPS PCB Bottom........................................................................................... 6-13
Contents
7. Schematic Diagram
7-1 Overall Block Diagram......................................................................................7-1
7-2 FRONT..............................................................................................................7-2
7-3 TOUCH KEY.....................................................................................................7-3
7-4 MAIN.................................................................................................................7-4
7-5 MPEG...............................................................................................................7-5
7-6 MICOM..............................................................................................................7-6
7-7 AV I/O................................................................................................................7-7
7-8 AMP..................................................................................................................7-8
7-9 Audio AMP-1..................................................................................................... 7-9
7-10 Audio AMP-2..................................................................................................... 7-10
7-11 Audio AMP-3..................................................................................................... 7-11
7-12 SMPS................................................................................................................7-12
Disassembly & Reassembly
- Be careful to follow the disassembly sequence described in the manual. Otherwise, the product
may be damaged.
- Be sure to carefully read and understand the safety instructions before performing any work as
the IC chips on the PCB are vulnerable to static electricity.
- In order to assemble reverse the order of disassembly.
8 1) Disassemble complete.
W391
T001
W391
M0081
M0014
M0081
D001A
W391
W390
HDM01
P001A
W391
F001A W391
MF01A
HH02 F001
MK01A CBR01
W391
FD04
HDP01
CB22
AL210
AD502
HH01
FD12
5-1 This Document can not be used without Samsung’s authorization. Samsung Electronics
Exploded View & Part List
Part List
Samsung Electronics This Document can not be used without Samsung’s authorization. 5-2
Exploded View & Part List
Center Speaker
Front
Speaker (R)
Front
Speaker (L)
DIGITAL
AUDIO IN
OPTICAL
iPod
Rear Rear
Speaker (R) Speaker (L)
Subwoofer
Part List
5-3 This Document can not be used without Samsung’s authorization. Samsung Electronics
Exploded View & Part List
Samsung Electronics This Document can not be used without Samsung’s authorization. 5-4
Exploded View & Part List
5-5 This Document can not be used without Samsung’s authorization. Samsung Electronics
Exploded View & Part List
Samsung Electronics This Document can not be used without Samsung’s authorization. 5-6
Exploded View & Part List
5-7 This Document can not be used without Samsung’s authorization. Samsung Electronics
Exploded View & Part List
Samsung Electronics This Document can not be used without Samsung’s authorization. 5-8
Exploded View & Part List
5-9 This Document can not be used without Samsung’s authorization. Samsung Electronics
Exploded View & Part List
Samsung Electronics This Document can not be used without Samsung’s authorization. 5-10
Exploded View & Part List
5-11 This Document can not be used without Samsung’s authorization. Samsung Electronics
PCB Diagram
6. PCB Diagram
6-1 Wiring Diagram
8)CN5:15P CON3:15P
6)CN1: 23P CONN WIRE
SMT CON
DECK
#1 pin start
5)CN2: 9P position
DIP CON
DECK 2) CN9 : 32P FFC DIP STR
1
150MM
FRONT PCB
60MM
4)CN1:7P SMD
CONN STR TOUCH PANEL
1
U1
2
FCON1
1
UIC2
KIC2
1 FCON1 2 U1
TO MAIN FFC(ST) TO TOUCH KEY (ST)
3 VFD_N27V 19 TEST 3 ND
4 VFD_CLK 20 NC 4 OPSW
1 IC1
CN1
2 CN1
FROM FRONT (ST)
TP6
TP4 TP3
TP6
TP2
TP5
TP3
IC11 TP1
IC36
TP4
TP5
5
TP7
ACON1
IC10 TP6
IC21
AIC4 AIC19
CN4 TP1
1
CN1
CN5
4
IC15
IC7 CN2
CN9 3
2
Pin No. Signal Pin No. Signal Pin No. Signal Pin No. Signal Pin No. Signal Pin No. Signal
TP1 TP6
TP2 TP7
TP3
TP4
TP5
IC1
IC20
IC2
IC35
AIC16
IC3
IC16
IC8 AIC22
CON1
CON2 CON3
1. Precaution
Follow these safety instructions while servicing the ESD to prevent damage and to protect against potential
hazards such as electrical shock and X-rays.
1. When reinstalling the chassis and its assemblies, be sure to restore all of the protective devices, including the
control knobs and the compartment covers.
2. Make sure that there are no cabinet openings through which people (particularly children) can make contact
with dangerous internal components.
current between a known ground and all exposed metal <Fig. 1-1 AC Leakage Test>
parts.
Known Grounds - Earth
Known Metal parts - screwheads, metal cabinets, etc.
If any of the exposed metallic parts has a return path <Fig. 1-2 Insulation Resistance Test>
to the chassis, the measured resistance should be
between 1 and 5.2 megohms. If there is no return path,
the measured resistance should be “infinite.” If the resistance is outside these limits, a shock hazard might
exist. See Fig. 1-2
6. Components, parts and wiring that appear to have overheated or that are otherwise damaged should be
replaced with parts that meet the original specifications. Always determine the cause of damage or overheating,
and correct any potential hazards
7. Observe the original lead dress, especially near the following areas: Antenna wiring, sharp edges, and
especially the AC and high voltage power supplies. Always inspect for pinched, out-of-place, or frayed wiring.
Do not change the spacing between components and the printed circuit board. Check the AC power cord for
damage. Make sure that no wires or components touch thermally hot parts.
9. Components that are critical for safety are indicated in the circuit diagram by shading, or . Use
replacement components that have the same ratings, especially for flame resistance and dielectric strength
specifications. A replacement part that does not have the same safety characteristics as the original might
create shock, fire or other hazards.
2. Always unplug the unit’s AC power cord from the AC power source before attempting to: (a) Remove or reinstall
any component or assembly, (b) Disconnect an electrical plug or connector, (c) Connect a test component in
parallel with an electrolytic capacitor.
3. Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes
used. The internal wiring may be clamped to prevent contact with thermally hot components. Reinstall all such
elements to their original position.
4. After servicing, always check that the screws, components and wiring have been correctly reinstalled.
Make sure that the portion around the serviced part has not been damaged.
5. Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal
panels, input terminals and earphone jacks).
6. Insulation Checking Procedure: Disconnect the power cord from the AC source. Connect an insulation
resistance meter (500V) to the blades of the AC plug.
The insulation resistance between each blade of the AC plug and accessible conductive parts (see above)
should be greater than 1 megohm.
7. Never defeat any of the B+ voltage interlocks. Do not apply AC power to the unit (or any of its assemblies)
unless all solid-state heat sinks are correctly installed.
8. Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive
lead; always remove the instrument’s ground lead last.
First read the “Safety Precautions” section of this manual. If some unforeseen circumstance
creates a conflict between the servicing and safety precautions, always follow the safety
precautions.
Some semiconductor (“solid state”) devices are easily damaged by static electricity.
Such components are called Electrostatically Sensitive Devices (ESDs).
Examples include integrated circuits and some field-effect transistors. The following techniques will reduce the
occurrence of component damage caused by static electricity:
1. Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from
your body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. (Be sure to
remove it prior to applying power--this is an electric shock precaution.)
2. After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent
accumulation of electrostatic charge.
3. Do not use freon-propelled chemicals. These can generate electrical charges that damage ESDs.
5. Use only an anti-static solder removal device. Many solder removal devices are not rated as “anti-static” (these
can accumulate sufficient electrical charge to damage ESDs).
6. Do not remove a replacement ESD from its protective package until you are ready to install it.
Most replacement ESDs are packaged with leads that are electrically shorted together by conductive foam,
aluminum foil or other conductive materials.
7. Immediately before removing the protective material from the leads of a replacement ESD, touch the protective
material to the chassis or circuit assembly into which the device will be installed.
8. Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes
together, or lifting a foot from a carpeted floor can generate enough static electricity to damage an ESD.
2. Product Specification
2-1 Product Feature
USB Host
- Instant Entertainment through USB
- Directly rip the music in our CD’s to your USB external device
- MTP type file is also ready for play
Playability
- Never fail, Play without trouble. Just press play and enjoy
- Rolling actuator technology adjusts the lens angle to the curved disc surface
- Defect Disc Recovery Solution can deliver a clear picture despite of scratches or other defects on the disc.
ASC
- Using ASC, simply make sweet spot anywhere in your room
Touch Sensor
- Emotional values by using the touch sensor button
Portable Connection
- Easy Connectivity
- Walkman, ipod, MD etc. DRM Free
- Connect with any kinds of Portable Audio device
- Stereo Input in Front
- Made for iPod
- Easy connection w/ ipod
- Improvement : video & iPhone support
2-2 Specifications
2-2-1 Specifications
Basic Specification
Speaker Specification
Photo
HDMI CEC O O
Calliope X X
Sleep O O
Dimmer O O
CD/CD-R/CD-RW O O
VCD/SVCD X X
DVD/DVD-R/DVD-RW O O
MP3 O O
JPEG Viewer O O
Compatible
DVD-Audio X X
A/V
DVD-OK X X
WMA O O
SACD X X
WIRELESS O O
USB HOST O O
Logo copy X X
DVD (Video)
NTSC ↔ PAL O O
PAL M (Brazil) O O
Photo
Photo
FM O O
RDS O (only Europe) O (only Europe)
Tuner
AM O (Brazil only) X
Preset Memory 15 15
Universal (MBR) O O
Remote Key
Key 49 Key 60 Key
Dual Voltage O (Brazil only) X
Type (Sat/Tallboy) Sat / Tall Sat / Tall
Stand O O
Speaker
Impedance (Sat/Woofer) 3Ω/ 3Ω 3Ω/ 3Ω
Active (Powered) S/W X X
Net Weight Set 5.5 Ibs 7.7 Ibs
2-4 Accessories
FM Antenna AH42-00021A
7. Schematic Diagram
7-1 Overall Block Diagram
The loader reads disc data and it goes through SERVO part in MPEG ic(ES8393). The data from loader will be
decoded by MPEG processing and Video data and Audio data will go out.
A- VIDEO
Pick-up / Loader
EEPROM
The firmware of MPEG ic is programmed to FLASH.
24C08
Flash SDRAM
12L128168A
When MPEG is boot up, the data from FLASH is dumpped to SDRAM.
1매 AT26DF161
I2C EEPROM will save back-up information from MPEG ic.
THS7374
The video data goes out in two different ways. Analog video data is going out to composite and component jack via
FSA2257
SERVO
VIDEO
ANALOG VIDEO
DIGITAL VIDEO
buffer ic(THS7374), and HDMI video data goes to HDMI jack directly.
Motor
I2S The Audio data is going out to Power AMP block. The amp block will process the audio data from MPEG ic and the
Driver ADC HDMI sound goes throgh speakers.
AM5766
DSP ES8398
DIR/ PWM
PWM 6CH
AUX2, AUX1, ipod, Tuner and mic data will go through ADC block in MPEG ic. The data from ADC will do the same
AUX2
USB (DAC) Power AMP processing like SERVO.
4560
AUX1
USB data from USB device and SPDIF data from optical jack also do the same things.
i-Pod IRS2053 F
TUNER
4066
TUENR I2C 4WIRE L Audio Micom(LC87C5N) is the HOST controller of the system.
F
MIC SA2011
EEPROM
I2C
UART IRF6645 R
It will control MPEG ic, CEC micom, VFD, Touch key ic, tuner pack, and wireless module.
CEC
SPDIF 24C08
Optic IN M80F0316
LC87C5N
D+/D- IRS2053 C
I2C
USB T
I2S EEPROM
S
WIRELESS
24C08 IRF6645 W
I2C SPI
I2C
NTS1124N
IRS2053 R
L
R
IRF6645 R
VFD
Touch key
Samsung Electronics This Document can not be used without Samsung’s authorization. 7-1
Schematic Diagram
7-2 FRONT
POWER
AUDIO
7-2 This Document can not be used without Samsung’s authorization. Samsung Electronics
Schematic Diagram
POWER
Samsung Electronics This Document can not be used without Samsung’s authorization. 7-3
Schematic Diagram
7-4 MAIN
POWER
AUDIO
7-4 This Document can not be used without Samsung’s authorization. Samsung Electronics
Schematic Diagram
7-5 MPEG
POWER
AUDIO
TP2
TP2
TP6
TP5
TP3 TP4
TP3 TP5
TP4 TP6
Samsung Electronics This Document can not be used without Samsung’s authorization. 7-5
Schematic Diagram
7-6 MICOM
POWER
AUDIO
7-6 This Document can not be used without Samsung’s authorization. Samsung Electronics
Schematic Diagram
7-7 AV I/O
POWER TP6
TP3
AUDIO TP5
TP4
TP6
TP5
TP4
TP3
TP4
TP5
TP6
Samsung Electronics This Document can not be used without Samsung’s authorization. 7-7
Schematic Diagram
7-8 AMP
POWER
AUDIO
FAN_SD
+12V
R464
0OHM
1/16W
+12V
1/16W
33KOHM
R500
1/16W
C R468 4.7KOHM
Q29 B
2SC1008-Y E
4.7KOHM
1/16W
R465
R516
3.3KOHM
1/16W
C313
10UF
CN12
18KOHM
1/16W
B CE
16V
R501
10OHM
C305
10UF
10UF
8
7
6
5
R476
R478
1W
100OHM
1/16W
1/16W
47KOHM
16V
16V
1
C307
C330
1UF
16V
2
IN1+IN2-
VEE IN2+
OUT2
OUT1 VCC
IC35
A_GND
S4560
D5V +12V
IN1-
A_GND
5267-02A
0.01OHM
33KOHM
L45 5000MA A_GND
1/16W
FAN_CHK
2
3
4
1
R502
JA4
C257
10UF 1 D30 D34
1
VCC A_GND
R514
10V
27OHM
1/16W
47KOHM
1/2W
R515
2 2
GND 1SS355-TE-17 1SS355-TE-17
1/16W
R503
80V 80V
15KOHM
1/16W
SPDIF_IN
R340 470OHM 3 3
VOUT
LTDL-RX16S01B
DGND
R485 A_GND R504 C320
DTP2
DTP3
DTP1
LHPR13
LHPC10
LHPC12
50V
1/16W
1NF
10KOHM
50V
1/16W
100PF
4.7KOHM
1/16W
LHPR15
LHPR11
10UF 1/16W 1/16W A_GND
4.7KOHM
16V 1.8KOHM 7.5KOHM
LHPC1 LHPR4 LHPR8 1/16W
LINE_O_R
VAA+5V
LHPC5
LHPR3
10UF
10KOHM
680PF
50V
1/16W
25V
LHPC9
5
6
7
8
IC32
VEE IN2+
IN1+IN2-
OUT2
OUT1 VCC
A_GND
S4560
A_GND
IN1-
4
3
2
1
VSS-5V
22UF
6.3V 33OHM 220UH
1/16W LHPC11 LHPR18 LHPL2
4.7KOHM 4.7KOHM
LHPR10 LHPR14 1/16W
LHPC13
10KOHM
TP1
50V
1/16W
100PF
LHPR17
1/16W
10UF 1/16W 1/16W
16V 1.8KOHM 7.5KOHM
LHPC2 LHPR9 LHPR12
LINE_O_L
LHPC7
LHPR5
680PF
50V
10KOHM
1/10W
A_GND
1NF
50V
LHPC8
A_GND
TP1
1/16W
AR20 100OHM
PWM1_R PWM_C_P
1/16W
AR21 100OHM
PWM1_L PWM_SW_P
1/16W
AR22 100OHM
PWM2_R PWM_RL_P
1/16W
AR23 100OHM
PWM2_L PWM_RR_P
1/16W
AR24 100OHM
PWM3_R PWM_FL_P
1/16W
AR25 100OHM
PWM3_L PWM_FR_P
7-8 This Document can not be used without Samsung’s authorization. Samsung Electronics
Schematic Diagram
POWER
AUDIO
Samsung Electronics This Document can not be used without Samsung’s authorization. 7-9
Schematic Diagram
POWER
AUDIO
TP1
TP1
7-10 This Document can not be used without Samsung’s authorization. Samsung Electronics
Schematic Diagram
POWER
AUDIO
TP1
TP1
Samsung Electronics This Document can not be used without Samsung’s authorization. 7-11
Schematic Diagram
7-12 SMPS
7-12 This Document can not be used without Samsung’s authorization. Samsung Electronics
Troubleshooting
4. Troubleshooting
4-1 Checkpoints by Error Mode
No power detected
(Stand by LED off)
No
FR1 is OK? Change fuse
Yes
No No
CON3 Pin 12, 13, 14 is 5.4V? ICFB5401 Pin 1 is 2.5V Change SMPS.
4-1-2 No Sound
No Sound
1
Check JA5 input signals. Yes Check speakers.
(1khz signal) (speaker change)
2
Check AIC4, AIC19 input signals Yes Replace AMP IC.
(AC54, AC55, AC56, (AIC4, AIC19)
AC1, AC2, AC3)
3
Check MPEG DAC output Yes Check DAC output signal lines
(1.7v offset) (pin 83, 84, 85, 88, 89, 90 between IC10 and AIC4 and
of IC10 ES8398) AIC19
No
1/16W
33KOHM
R500
1/16W
4.7KOHM
3.3KOHM
1/16W
R516
C313
10UF
18KOHM
1/16W
B CE
16V
CN12
R501
10OHM Troubleshooting
8
7
6
5
R476
R478
100OHM
1/16W
1/16W
47KOHM
C307
C330
1 1W
1UF
16V
2
IN1+IN2-
VEE IN2+
OUT2
OUT1 VCC
IC35
S4560
IN1-
+12V A_GND
5267-02A
33KOHM
1/16W
2
3
4
A_GND
R502
FAN_CHK
D30 D34
A_GND
R514
27OHM
1/16W
47KOHM
1/2W
R515
1SS355-TE-17 1SS355-TE-17
R503
15KOHM
1/16W
80V 80V
LHPC10
50V
1/16W
LHPC12
10KOHM
50V
1/16W
100PF
1NF
4.7KOHM
1/16W
LHPR15
LHPR11
1/16W A_GND
4.7KOHM
HM 7.5KOHM
LHPR8 1/16W
LHPC5
VAA+5V
680PF
50V
10UF
25V
LHPC9
5
6
7
8
IC32
VEE IN2+
IN1+IN2-
OUT2
OUT1 VCC
A_GND
S4560
IN1-
A_GND
4
3
2
1
1
VSS-5V
22UF
6.3V 33OHM 220UH
1/16W LHPC11 LHPR18 LHPL2
4.7KOHM 4.7KOHM
LHPR10 LHPR14 1/16W
LHPC13
10KOHM
50V
1/16W
100PF
LHPR17
1/16W
1/16W 1/16W
1.8KOHM 7.5KOHM
LHPR9 LHPR12
LHPC7
LHPR5
680PF
50V
A_GND
1NF
50V
LHPC8
A_GND
1/16W
AR20 100OHM PWM_C_P
1/16W
AR21
AR22
100OHM
1/16W
100OHM
PWM_SW_P
AMP, page 7-8
PWM_RL_P
1/16W
AR23 100OHM PWM_RR_P
1/16W
AR24 100OHM PWM_FL_P
1/16W
AR25 100OHM
1
PWM_FR_P
1
ACON1
<Fig. 4-1>
IC11
AIC4 AIC19
2
CN1
IC7
CN2
ACON1
2
AIC19
2
CN5
<Fig. 4-3>
IC11
3
IC36
3
IC10
AIC4
CN4
<Fig. 4-4>
IC7
Troubleshooting
1
Check if VDAC output is No Check if VDD of 3.3V No Check if the pin 7, 8
measured at the pin 77 of is measured at the pin 82, of IC23 are 3.3V.
IC10 ES8398 78, 72 of IC10
Yes
Yes Refer to wave pattern
image of Fig. 4-5.
Replace the IC10 IC Replace the IC23 IC.
Check Video switch.
Yes
Yes
2 No
Check if composite video output is Check the JA1 connectivity
measured at the JA1. and replace.
IC11
IC36
1
IC10
AIC4
CN4
CN1
<Fig. 4-5>
15
IC7
4-8 Samsung Electronics
CN2
Troubleshooting
IC11
IC36
<Fig. 4-6>
IC10
Troubleshooting
1/2/3
Check if YDAC,CADC
and UDAC output is measured No Check if VDD of 3.3V is No Check if the pin 7, 8 of
at the pin 76, 80 and 81 of measured at the pin 82, 78, IC23 are 3.3V.
IC10 ES8398. 72 of IC10.
4/5/6
Check if output is measured No Check if VDD of 3.3V No Check 3.3V power lines
at the pin of 11,13 and 12 of is measured at the pin from IC23 to IC36.
IC36 THS7374. 10 of IC36.
2
1
IC11
IC36
IC10
2 2
1
AIC4
CN4
MAIN PCB Top, page 6-8
CN1
<Fig. 4-7>
C15
Troubleshooting
IC11
IC36
3
IC10
AIC4
CN4
MAIN PCB Top, page 6-8
CN1
<Fig. 4-8>
C15
Troubleshooting
IC11
5 4
IC36
5
<Fig. 4-9>
6 IC11
IC36
<Fig. 4-10>
Analog (Composite)
Video OK but HDMI
No
Check MPEG Ouput.
No
No
1 IC11
IC36
3
1
IC10
1
AIC4
MAIN PCB Top, page 6-8
CN4
<Fig. 4-11>
CN1
<Table 4-1>
GND
Micom initial
In no Disc condition, press ‘STOP’ button of Main Unit more than 5 seconds, VF Display will happen to INIT and M
int. Then Initialization complete.
Micom Update
1. Prepare or Make a DISC-CD or DVD or USB that contains “C550WWM.SSP’ file for update.
2. Play the USB, then “updating” will appear on the screen, then Power will go out after showing ‘complete’ on the
screen.
3. Press “Power” key and Press ‘Stop’ button of the remote control more than 5 seconds in No Disc.
3. Press “Enter”.
4. Check product information: “SW ver” on TV Display and “Micom SW Ver” on Front ASS’y VFD.
2. Play the DISC or USB, then ‘Updating’ will appear on the screen, then Power will go out and on.
3. Then DISC-TRAY will open, then remove the DISC or USB, making the Unit as ‘NO DISC’ state.
4. Press ‘STOP’ button of Main Unit for more than 5 seconds, Display Indicator shows ‘INITIALIZE’ then Power
goes out.
4-4-1 The inserting method of Region Code after replacing the Main PBA
[Reference]
- When replacing the Main PBA and System Micom should be inserted the region code.
- The set is not working properly if you don't insert the region code.
- The region code is inserted by the remote control.
4. When you see “TEST” on VFD, Insert number “4”, “6” to start
Region Code setting mode.
TEST
Option Table
<Table 4-2>
6. After step (5), you can see “15 USA” on the VFD.
It means that currently System Micom program is installed by USA
specification. 15 USA
[Tip]
In case of System Micom and EEPROM problem, you can apply to this.
For example, during Updating program of System Micom, if Updating fail is happened, it is impossible to turn on
the system from stand-by status.
The system will keep the stand-by status continuously, and the touch-key function will never work.
In this case, you have to change System Micom, and set up the Buyer Region code again.
In case of EEPROM, you don't need to care about it.
After set-up the Region code, System Micom will store the information of the region code to EEPROM
automatically.