Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Project Specification: ACM-LA-A-SPC-000004[01] +37 Landscape Specifications Section 055000 Area of Application: Level 04
Trellis: 4mm diameter grade 316 stainless steel cables fixed to the top beam and concrete base structure using stainless Trellis: 4mm diameter grade 316 stainless steel cables fixed to the top beam and concrete
5
steel anchors as indicated on the Design Drawings. base structure using stainless steel anchors as indicated on the Design Drawings.
Compliance
Cables shall be vertically orientated and equally spaced across the width of the screen/ trellis as indicated on the Design Cables shall be vertically orientated and equally spaced across the width of the screen/
Drawings, trellis as indicated on the Design Drawings,
6 Size: As indicated on the Design Drawings. Size: As indicated on the Design Drawings. - 5mts length, 1.3 mtr height Compliance
7 Finish and Color: As indicated on the Design Drawings. Finish and Color: As indicated on the Design Drawings.
Compliance
IFC Drawing Ref: ACM-LA-A-360-37SW10[E] - Powder Coated, Matte White IFC Drawing Ref: ACM-LA-A-360-37SW10[E] - Powder Coated, Matte White
The work shall be located within metal planters as indicated on the Design Drawings. Refer also to Section 323300 Site The work shall be located within metal planters as indicated on the Design Drawings. Refer
8 Compliance
Furnishings. also to Section 323300 Site Furnishings.
Materials: Materials:
Metal Surfaces, General: Provide materials with smooth, flat surfaces unless otherwise indicated. For metal fabrications Metal Surfaces, General: Provide materials with smooth, flat surfaces unless otherwise
1 exposed to view in the completed Work, provide materials without seam marks, roller marks, rolled trade names, or indicated. For metal fabrications exposed to view in the completed Work, provide materials
blemishes. without seam marks, roller marks, rolled trade names, or blemishes.
Aluminum sheets shall not suffer bowing, dimpling, oil canning, sagging, pillowing, rippling, Galvanised Steel shall not suffer bowing, dimpling, oil canning, sagging, pillowing,
warp, abrupt transitions or other visible deformation or irregularity. rippling,warp, abrupt transitions or other visible deformation or irregularity.
Stainless Steel : Stress corrosion or cracking shall not occur and all necessary precautions in
Stainless Steel : Stress corrosion or cracking shall not occur and all necessary precautions in the fabrication and installation
3 the fabrication and installation of stainless steel elements/ materials shall be undertaken,
of stainless steel elements/ materials shall be undertaken, avoiding the simultaneous presence of any of the following:
avoiding the simultaneous presence of any of the following:
b. Residual stresses after cold working or welding b. Residual stresses after cold working or welding Compliance