Sei sulla pagina 1di 1

SIR J. C.

BOSE SCHOOL OF ENGINEERING


(2nd year Lateral Entry ) INTERNAL TEST-2015
B.TECH
DISIPLINE: CSE
SUBJECT:- Analog & Digital Electronics Time: 1 hour
SUBJECT CODE: - CS 301 Full marks: 30

CSE 3rd Sem. (2nd year)


(Answer any five)
1x5=5
1. Race around condition does not occur in flip flop__ a) T, b) J-K, c) Master Slave J-K, d) None of these.
2. An example of reflected code is __________ a) Gray, b) BCD, c) Hamming, d) ASCII.
3. Flip flop has _________ a) 1 stable state, b) 2 stable state, c).No stable state, d) None of these.
4. Negative feedback in an amplifier is
i). reduced gain, ii) increased noise, iii) increased frequency & phase, iv) reduced bandwidth,
5. How many minimum NOR gates is required to implement NAND gate?
i).3, ii) 4, iii) 5, iv)2.
6. The digital logic family which has minimum power dissipation is
i).TTL, ii) RTL, iii) DTL, iv) CMOS.

(Answer any two)


2X5=10
1 Implement the following function 8:1 multiplexer: F(A,B,C,D)= m( 0,1,3,6,7,8,11) 5
Or What is a counter? Draw the circuit diagram and output waveform of a mod 6 ripple counter. 2+3=5
2 Draw and explain the operation of an astable multivibrator using 555 timer.
Or If the value of resistor used in feedback network is 20 KOhm find the value of the 5
capacitance required to generation 1kHz in Wien-bridge oscillator.
3 Draw and explain the operation of a transformer coupled class-A power amplifier. 2+3=5
Or Representation in SOP and POS forms by using K’Map?

(Answer any one)


1X15=15
1 Define the following terms related to logic families: (any three) 5+5+5=1
i) Fan in. ii) Fan out. iii) Propagation delay. iv) Noise margin, vi) Figure of merit. 5
Or Gray code to Binary conversion with Truth table, K’map 5+5+5=1
2 Explain the operation of a Wien-bridge oscillator, Derive an expression for its 5+5+5=1
frequency of oscillation. Write the condition of oscillation & application of 5
Or, Minimize the following expression using Karnaugh Map. 8+7=15
F (A, B, C, D) = M ( 0, 1, 3, 8, 10, 15 ) + d ( 11, 13, 14 )
F ( A, B, C, D ) = m( 0 , 1 , 2 , 5 , 8 , 1 4 ) + d ( 4, 10, 13 )

Potrebbero piacerti anche