Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PLANT INSPECTOR
SUMMARY OF EXPERIENCE
Have Bachelor of Engineering with 15 years of direct Experience in the field ofOil & Gas Upstream
Productions & Exploration facilities – Greenfield & Brownfield in Raw Material, NDT, Welding,
Painting/Coating, Cathodic Protection, Testing, Inspection - (static and packaged equipment-Shop
& Site), Shutdowns,DocumentationandAuditin the below categories,
ACADEMIC EDUCATION
CERTIFICATIONS
PCN ET Level II: Eddy current Inspection from BINDT United Kingdom Cert. No M015S3128747
PROFESSIONAL TRAINING
COMPUTER SKILLS
CODE FAMILIARITIES
ASME SEC I, ASME SEC II – Part A & C, ASME SEC V, ASME SEC VIII, DIV 1 & 2, ASME SEC IX, ASME
B31.1, ASME B31.3, API 1104, API 510, API 570,API 650, API 653,BS 1113:1999.
JOB RESPONSIBILITIES
To review the Inspection and Test Plan, Welding procedures, Procedure Qualification Records,
Welder Qualification certificates, NDT Procedures andDestructive testing procedures, PWHT
etc. as per the code requirements.
Attend pre-inspection meetings / progress meetings.
Participate in project management visits / Sub-contractors internal and external audit
processes and quality contractors / subcontractor’s toolbox meeting.
Responsible for inspection requirements of static and packaged equipment material receipt,
preservation, installation and testing at site during construction phase.
Provide inspection requirements to contractor and subcontractors at all stages of the projects
for the specific discipline.
Review inspection & test plan, procedures, method statements, vendor requirement and
monitor their implementation at site.
Participate/Perform stage wise and final inspections of installed equipment.
Ensure that any non-conformities (NCRs) identified are effectively addressed and closed.
Ensure that the Corrective action reports issued are followed up and closed-out.
Review/comment on technical queries / concessions / deviations related to project.
Liaise with on-site Certification Authorities, Notified Body and other third parties
Witnessing and Review WPS & PQR as per codes and project specification.
Witnessing and Review qualifying contractor, Welder Qualification Test to various approved
WPS.
Witnessing and verifying inspection as required / as per approved ITP. (NDT-PT,MT,UT,
mechanical test (destructive tests), hardness test, PMI test, PAUT, hydro test, pneumatic/leak
test/penetrant oil test, vacuum box test)
Material inspection of plates, pipes, fittings and welding consumables.
Materials experienced in the Welding Inspector - Carbon steel, Stainless Steel Type 304, 316L
and DSS, Low alloy steel – P4, P5A&P5B, high alloy steel - CuNi/Weld Overlay
Witness and Review NDT Test PAUT, UT, RT, MT, PT & visually accepted joints to cope up with
the NDT percentage requirements.
Functionally supervise contractor and subcontractor QA/QC Inspectors and ensure compliance
with requirements of the contract and applicable codes.
Monitoring of all welding activities prior, during and after, which include material check,
qualified welders in right job and welding equipment’s.
Witnessing Painting procedure and applicator qualification test as per project specification.
Witness of the coating integrity of mainline and field joint coating before lowering the
pipelines to the trench.
Witness of Surface Profile, Salt Test, Dry Film Thickness, Adhesive Test, Peel Test & Holiday
Test.
Monitoring and witnessing field joint coating for both aboveground and underground Pipeline.
Review blasting & coating material Batch certificates (like coal slag, Garnet & Natural
Abrasive) & pot life.
Assessing pre-blast and post blast condition of substrate prior to painting application.
Review the contractor documents for environmental conditions like Relative humidity, Dew
point and Steel surface temperature.
Witness Laboratory Qualification Tests of External & Internal Coating system (Adhesion Test,
Catholic disbandment Test, Thermal Analysis Test (DSC) and Elongation Test).
Inspection of validity for all measuring devices and daily log for weather condition.
Review of contractor QC documentation like, QC Dossier, Test Packages for Pipeline, and
Piping&Tanks construction as per ITP.
Witness &Review of Final Inspection Release Note (IRN/IRC), Mechanical Completion
Certificate (MCC) - Punch list for Test packages like Piping, Equipment, and Tanks& Pipeline.
Ensure and support production of completion dossiers for handover to Pre-
Commissioning/Commissioning/operation and Maintenance.
Familiar with health, safety and environment (HSE) activities and policies. (Basic Safety
Regulations, working at height, H2S, Confined space, live/runningplant safety)
EXPERIENCE IN ABROAD
EXPERIENCE IN INDIA
Client: M/S.HPCL, VIZAG,
Project: maintenance
Inspected Items: all pressure vessels ,pipes and valves
Period: from JULY – AUG 2015,
Position : Plant Inspector
Client: Bharath Petroleum Corporation Limited – Mahul ( HCU )
Project: maintenance
Inspected Items: all pressure vessels ,pipes and valves
Period: From FEB 2013to Apr.2013
Position : Plant Inspector
Client: Hindustan Petroleum Corporation Limited –Mahul
Project: maintenance
Inspected Items: all pressure vessels ,pipes and valves
Period: from May 2013
Position : Plant Inspector
JOB RESPONSIBILITIES
DECLARATION
I hereby declarethat the above furnished information are true the best of my
knowledge and belief
Place; (S.R.NIDHARSHAN)