Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
info
OEM SYSTEMS
4L (2005-2015), 8V (2012-), A1/S1, A3/S3/RS3, A4/S4/RS4, A5/S5/RS5, A6/S6/RS6,
A7/S7/RS7, A8/S8, Audi, B8 (2007-), C6 (2004-2011), C7 (2011-), D3 (2002-2009), iDrive (BMW)
D4 (2010-), Q3/RS Q3, Q5, Q7 – November 6, 2014 MFD 1 (VW, Škoda, Seat,
Ford)
3G+) (Mazda)
RNEG (Peugeot, Fiat,
Lancia)
RNS 510/810, Columbus
(VW, Škoda, Seat)
RNS-D (Audi)
RNS-E (Audi, Seat,
Lamborghini)
POPULAR TOPICS
Anti-hijack lockout
GPS navigation
Hidden menu
Remote battery change
Service reminder
indicator reset
VCDS coding &
adaptation
Audi MMI hidden green menu gives you access to lots of
interesting settings, features and diagnostic data. You can
customize lots of user interface details and enable some optional
features.
Tools
mr- x.info
Diagnostic interface like VCDS, VAG-COM, VAS or any other
that’s capable of performing coding and adaptation
procedures.
Warning!
Performing this procedure may cause permanent damage to your
car.
Do this at your own risk!
We are not responsible for any loss or damage.
Preparation
Check your Multi Media Interface version.
Check this article: Audi navigation systems – MMI RNS BNS
RMC differences.
First connect diagnostic interface to the OBD2 port, then turn
the ignition on.
Please make sure that your Audi Multi Media Interface software
version is up to date. In some older versions you won’t have
access to hidden green menu or it will have less options then
described. Read article MMI 2G software update to version 5570.
Changes will be visible next time you turn on MMI 3G system. You
can do that immediately by pressing system reset key
combination. Check the article Audi MMI force restart (2G, 3G,
3G+).
This article was tagged Audi Multi Media Interface (MMI 2G), Audi Multi Media Interface
(MMI 3G), coding and adaptation (VCDS), GPS navigation, hidden menu, tips & tricks,
vehicle audio.
Related Articles
mr- x.info
Ramaries says:
January 31, 2015 at 3:38 AM
I’m trying to perform this function using a bluetooth obdII and an OBD
terminal app on my android. All the terminal let’s me do is input
commands. Would you happen to know what command I can type to
achieve this, or if there’s a Android app that provides an interface like
the one in the video?
Reply
mr-fix.info says:
January 31, 2015 at 5:59 PM
Zia says:
September 30, 2015 at 4:47 PM
Hi, I have Audi a6 2009 with 3g system, have enabled channel 6 and
restarted mmi but still cannot access hidden menu, any advise please.
Reply
mr-fix.info says:
October 1, 2015 at 8:24 PM
heck if you press buttons in correct order. First SETUP, then CAR.
Sam says:
October 5, 2015 at 12:59 PM
Hi Mr Fix, I’ve got teh software which is VCDS and I bought a cable too,
however, I’m not getting any connection between the car and the
laptop. Does it need to be a genuine Ross Tech cable or are there ways
around this? My car is an Audi A6 C6 2008 2.0 TDi.
Reply
mr-fix.info says:
October 12, 2015 at 3:05 PM
Shehr says:
October 19, 2015 at 10:00 AM
Hi Mr fix,
just wondering if you can share the VCDS or the VAG-COM software
like you kindly shared the MMI update CDs and the NAV DVDs.
would be really grateful.
Reply
mr- x.info
mr-fix.info says:
October 19, 2015 at 10:50 AM
Ozzy says:
November 2, 2015 at 10:06 AM
Reply
mr-fix.info says:
November 5, 2015 at 12:52 PM
Are you sure that when you read current value you get -128 (with
minus)?
Ozzy says:
November 7, 2015 at 11:30 AM
Yes I get -128. That seems to be the default value in all other channels I
read. I will provide you screenshots if you wanna take a look.
Reply
Ozzy says:
November 7, 2015 at 11:42 AM
mr-fix.info says:
November 8, 2015 at 10:16 AM
Ozzy says:
November 8, 2015 at 1:34 PM
mr- x.info
I have posted screenshots here if you can please take a look.
http://www.audiworld.com/forums/audio-video-security-discussion-
15/mmi-3g-hdd-us-eu-maps-2891409/
Reply
I have audi A3 Cabriolet and it doesn’t have Setup or Car buttons. How
can i access the hidden menu?
Reply
mr-fix.info says:
November 23, 2015 at 7:00 PM
Depending on your cars made year you can have older RNS-E
system, newer Audi Concert. This post refers to MMI system.
Chriss says:
November 27, 2015 at 7:27 PM
Just changed the 0 into a 1 (Audi A6 2005 mmi 2g) and pressed car +
setup button at the same time…. But no hidden green menu pops up :-\
Reply
mr-fix.info says:
November 28, 2015 at 9:38 AM
Dave says:
December 10, 2015 at 2:27 PM
Reply
mr-fix.info says:
December 11, 2015 at 9:09 PM
Jaska says:
January 14, 2016 at 12:27 PM
mr- x.info
I have exactly the same problem: I’m able to establish the
connection normally with VCDS and I have already coded few
features. Everything seems to be working normally, but why am I
not able to enable the access to hidden menu? I have tried with
the procedure mentioned here.
Jaska says:
January 22, 2016 at 11:49 AM
The reason was that my Audi has MMI 3G RMC (low). You have to
change channel 5.
Press Car and the press Menu, and keep them hold until the Menu
appears.
Reply
Thankyou.
Reply
mr-fix.info says:
January 24, 2016 at 10:33 AM
Sander says:
April 5, 2016 at 7:18 PM
Hello mr. Fix I’m trying to open green menu in my mmi 2g (a6 avant).
mr- x.info
Setup first then car button but no menu. What I’m I doing wrong? By
the way I have no AMI and no extra connections in the glovebox or
handrest. Can I still retrofit bluetooth fir musicstreaming? I do have
bluetooth for phone.
Reply
mr-fix.info says:
April 9, 2016 at 4:15 PM
Albert says:
May 22, 2016 at 4:54 PM
Hi,
Reply
mr-fix.info says:
June 4, 2016 at 8:07 AM
Albert says:
May 30, 2016 at 1:46 PM
Hi There,
I can’t figure the MMI version from it however I am still working that it
is a 2G.
I have checked the MMI software version which is SW Ver
mr- x.info
BBT_EU_K0029_1_D1.
Reply
mr-fix.info says:
June 4, 2016 at 8:04 AM
Albert says:
June 15, 2016 at 8:04 AM
Thank you very much for clarifying that for me. All I am trying
achieve is a quality Aux In port. I have no CD changer and no Navi
or TV, reverse camera etc. Bare basic specification. Is there any
solution at all without going expensive AMI retrofit or Dension etc
etc ? Many Thanks
mr-fix.info says:
June 16, 2016 at 2:57 PM
what car? what year? what is the basic spec in your country?
Arif says:
June 4, 2016 at 1:30 PM
Hi Mr Fix
i got 2006 q7, but i try to press setup and car together it wont do
anything,
SW:AU-HU 28.6.0 0620
Thanks
Reply
mr-fix.info says:
June 16, 2016 at 3:02 PM
Albert says:
June 18, 2016 at 11:11 AM
Hi, it’s Audi A6 Avant 2.0 TDIe S Line early 2009 manufacture. UK
specification from 2008 Audi A6 brochure. Just model year before they
included the specification of CD changer in the S Line. So very basic. It
mr- x.info
has DSP but no Bose or any other upgrades etc. As you have now
explained it is an MMI 3G Basic. Many Thanks.
Reply
mr-fix.info says:
June 22, 2016 at 9:31 AM
Albert says:
June 23, 2016 at 6:13 PM
Hi, I may have found a solution which if successful I will share. A key to
the solution is to enable/activate the CD Changer (even though I don’t
have one in my car). I have a Rosstech VCDS. I would greatly appreciate
if you could give guidance on how to activate the CD Changer in the
system. Many Thanks, Albert.
Reply
Albert says:
July 19, 2016 at 6:17 PM
ante says:
July 15, 2016 at 9:05 AM
Hi, do you know if i can aktivate the oil temp and boost meter in the
green menu? :) got an a6 c7 mmi 3g +
Reply
mr-fix.info says:
July 16, 2016 at 9:32 PM
DTM says:
July 16, 2016 at 4:18 PM
I have a 2016 A4 B8.5, two things…..
mr- x.info
Does/should my car have MMI 3G or 3G+ radio in it?
Is it possible to change splash screen on the 3G+ MMI unit?
I’ve tried to the the A4 screen to the S-line screen with no success :(
Reply
mr-fix.info says:
July 16, 2016 at 9:31 PM
Matt says:
August 27, 2016 at 7:57 PM
My 2016 q3 splash screen goes blank when I turn the power off to the
radio , but on my 2014 S4 it goes to the welcome screen ? How do I
change it so the welcome screen is shown when the power is off to the
display screen and I can’t get my Q3 to the hidden menu ??
Reply
mr-fix.info says:
August 30, 2016 at 9:33 PM
Are you sure that you have Mmi 3G system in your Q3?
PunisherS7 says:
August 29, 2016 at 7:57 PM
I have a 2013 S7 and have accessed the hidden menu. I tried the mod
that allows you to raise (set to 5) the car when driving but once I get
over 45 mph the car still automatically lowers. I believe the range was 0-
10. Do you have experience with this?
Reply
mr-fix.info says:
August 30, 2016 at 9:32 PM
In hidden menu you can only unlock the raise “button” but the
restriction is still present in suspension module.
Martin says:
September 15, 2016 at 9:03 PM
Hi
Can I access the ‘green’ menu just by holding down ‘menu’ (don’t have
‘setup’) and ‘car’.
I don’t have the cable that you’re talking about?
mr- x.info
I’ve tried holding down both buttons at the same time but it doesn’t
seem to do anything? Is there a certain order or do I need the cable
first.
Sorry only had the car 24hrs so have no idea what I’m doing?
Oh and by the way the car is a UK A4 Allroad Quattro on a 63 plate
(2013).
Thanks, Martin
Reply
mr-fix.info says:
October 27, 2016 at 2:26 PM
good morning, I have an Audi A6 Avant 2012 with MMI plus 3Gs, leaves
no access me to GREEN MENU, pulse contact on the CAR + MENU keys
(leaving pressed both) and not access this menu, can you help me
please? Thank you
Reply
Tom says:
October 16, 2016 at 8:09 PM
what is the f5 control head. I have a foxwell nt510 and it has the names
of the control heads and not the hexadecimal number
Reply
mr-fix.info says:
October 27, 2016 at 2:21 PM
Dave says:
November 8, 2016 at 9:24 PM
I have tried Menu the Car =, Car then Menu, Both at the same time etc
Reply
mr-fix.info says:
mr- x.info
November 14, 2016 at 9:13 AM
Greetings
Exactly what is “AM/FM toggle” in the 3G hidden menu?
Reply
mr-fix.info says:
December 2, 2016 at 10:17 PM
Zeljko says:
December 10, 2016 at 10:21 AM
Hi
I have a4 avant 2012 with 3g mmi.
Can’t access green menu.
Please explaine how?
Reply
mr-fix.info says:
January 9, 2017 at 11:57 AM
Cory says:
December 11, 2016 at 3:41 PM
Reply
mr-fix.info says:
January 9, 2017 at 11:57 AM
If you have MMI 3G, then it should work. Try contacting Carista
developers to confirm that in fact this option works in this car.
madalin says:
mr- x.info
December 25, 2016 at 3:58 PM
can somebody tell me what exactly means all that thinks on green
menu mmi2g ?
i just make some changes on my audi a6 , with vag com and green
menu ,and now i have these probs:
-doesnt want to unlock using remote key , only from door lock manual ,
after this is working from remote
after 5 minutes or more i have to unlock manual …then is working again
-inside lights working only if i turn the ignition ON
-all radio ,gps ..etc . working only with ignition on ..
if i switch of these , will stop
what ive done wrong
Thanks
Reply
mr-fix.info says:
January 9, 2017 at 11:49 AM
Lukas says:
January 1, 2017 at 7:43 PM
Hi. I just bought UK version Audi A6 S-line 2016. I would like to get
acces to green menu to enable few options as automatic folding mirrors
and unlocking central lock by one click. It shows that my MMI software
is RMC_EU_P16092 but I’m not sure what MMI kind I have. I do not have
SETUP button. Many thanks for advice.
Reply
mr-fix.info says:
January 9, 2017 at 11:47 AM
Lakmun says:
February 27, 2017 at 4:25 PM
Q7 2008 TDI –
Any tips?
Reply
mr- x.info
mr-fix.info says:
March 7, 2017 at 10:54 AM
Ryan says:
March 6, 2017 at 5:39 PM
Hiello guys, is it possible for VIM be enabled through the hidden green
Menu? Or do you need VAG for this?
Reply
mr-fix.info says:
March 7, 2017 at 10:46 AM
Al says:
April 7, 2017 at 1:40 PM
Thanks for all the great tips. I don’t have a SETUP button in my 2014 Q7
(US). I have a MENU button. I tried using that, but no green menu. I
don’t think it’s enabled. I don’t have the VCDS capabilities or
equipment. Do you think my repair shop (not Audi shop) can do this for
me?
Reply
mr-fix.info says:
April 8, 2017 at 9:45 AM
2014 cars most likely have 3G+ system, where you should use
CAR and MENU buttons.
Any shop with proper tools should do it.
Gaby says:
April 8, 2017 at 9:56 PM
Hi, I have tried with VCDS and Vag-com to enable green menu on an
Audi a6 2008, 2.0 tdl, both programs see the cable at test, but when I
go on any codes it give me the message: no response from controller.
cable is KKL VAG-COM for 409.1, and I installed the vag-com progrm
that came with cable. The VCDS I downloaded from ross-tech . What
can do?
Thank you!
Reply
mr- x.info
mr-fix.info says:
April 28, 2017 at 10:12 PM
KKL standard is old and not used in A6 C6. You’ll need HEX-CAN
software AND hardware.
LEAVE A REPLY
Your email address will not be published. Required fields are marked *
Please, be kind!
Your Name
Your@Email.com
POST COMMENT