Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
O&M Management
U 2000 / LMT
Base stations of different RATs
RAT-L
OM
OM
which is labor-consuming.
UMPT Base stations of different RATs are
or maintained separately on the
LMPT U2000. O&M GUIs are different.
GBTS NodeB eNodeB
O&M experience difference is
Base Station Model O&M Mode large. O&M efficiency is low.
(for example, eNodeB)
Then Separate-MPT base stations are introduced in the SingleRAN solution. O&M of these base
stations can be unified.
RAT-L
OM
RAT-L
(GO/UO/LO/GU/GL/UL/GUL) share the same
RAT-G
RAT-U
OM
architecture to integrated architecture.
COMM
O&M of base stations of different RATs is
UMPT BTS 3900 unified, including GUIs, operations, and model
difinitions.
COMM RAT-G RAT-U RAT-L
COMM refers to objects related to
transmission devices, which are common
Base Station Model O&M Mode objects for different RATs.
Q How can I operate and maintain co-MPT base stations on the U2000?
Physical NE Node
N GBTSFunction
M
S Function
NodeBFunction
Node
eNodeBFunction
Physical NE Node
BTS3900 BTS3900 BTS3900
BTS3900 GSM WCDMA LTE
U
2
0 GBTSFunction
0
Function
0 NodeBFunction
Node
eNodeBFunction
GBSC
NE
BTS3900 BTS3900 BTS3900
BTS3900
GSM WCDMA LTE
Physical Data: Function Data:
Physical data corresponds to Physical NE Function data corresponds to Function Node in the figure
Node in the figure and represents common and represents multi-RAT logical functions provided by
device data and transmission data. co-MPT base stations. Function nodes, such as
The O&M channel is established between GBTSFunction, NodeBFunction, and eNodeBFunction,
this node and the U2000. Data is collected are displayed as lower-level attribute information in the
and sent over the O&M channel. NE navigation tree. They are not physical entities and
cannot be connected to NEs’ O&M channels.
1 2 3 4
Physical NE Node Function Node Base Station Type Service Function
Creation Policy Creation Policy Management Policy Management Policy
The creation process for After the BTS3900 is Five physical base station Functions that are not
the BTS3900 is the same properly connected and types of the BTS3900 closely related to base
as that for other base synchronized, the U2000 access the U2000 as the station RAT
stations. can automatically detect unified NE type (BTS3900) information are
The BTS3900 can be each Function from and use the same NE managed in overall
manually or automatically configuration data and mediation. Only one NE control mode.
created on the U2000. create them as subnodes mediation is required for all Functions that are
in the topology view. base sttion types of the closely related to base
same version. station RAT
information are
Distributed base station: separately managed
DBS3900 based on Functions.
Indoor macro base station:
BTS3900
Outdoor macro base station:
BTS3900A
Indoor large cabinet base station:
BTS3900L
Outdoor large cabinet base station:
BTS3900AL
Performance management
NE creation Fault management
NE RAT extension NE northbound
Topology display Software management NE reconstruction interconnection
License management
...
NE Access NE Reconstruction
C Ba pl
O NE
at ch e
by ng
in e
ne ti
g s
O rea
E
re t a o
N tic
in ut ch
at ch tic de
in e
tin tom en
g s
a
N
re u m
Es
· For details about how to create a single physical NE, create physical NEs in batches, and create NEs using the automatic
search function, see Topology Management > Creating Physical NEs in U2000 Online Help.
· For details about the NE automatic deployment function, see RAN Management > SON Management > NE Automatic
Deployment Management in U2000 Online Help.
Configuration Synchronization
The configuration synchronization function is appliable to the entire BTS3900 rather than a single
Function.
2. BTS3900 Display in the Topology
NE Icon
Co-MPT base station (NE type: BTS3900)
The upper-right corner indicates the supported RATs (underlined): G, U, L, M, GU, GL, UL,
or GUL
The lower-right corner indicates the supported modes: F, T, or FT.
Each RAT under the co-MPT base station is marked with @ at the lower-left corner.
NBBSFunction.
The upper-right corner indicates the supported RATs, such as TL, GU, GL, UL, GUL, WL,
and GUM
The lower-right corner indicates the supported modes: F (FDD), T (TDD), or FT (FDD&TDD).
After BTS3900 synchronization is complete, the U2000 mounts each RAT of Function based
on synchronized configuration information.
If the GSM and UMTS RATs are enabled on the BTS3900, the configuration module matches the GBTSFunction and
NodeBFunction with configuration data in the base station controller and displays the corresponding icons under the
base station controller.
If the LTE RAT is enabled on the BTS3900, the eNodeBFunction icon is displayed under the subnet where the
BTS3900 is located.
Topology View
Multimode View Physical View
Displays the relationship between base Displays the relationship between GU base
stations/Functions of different RATs under a stations/Functions under a multimode NE and their base
multimode NE. station controllers and between LTE base stations/Functions
and their subnets.
The performance management function manages the BTS3900 as a single base station
Navigation Tree Display
Object Type/Function Subset Navigation Tree Object Type/Function Subset Navigation Tree
Level-1 nodes are added, including GBTS
Function, NodeB Function, eNodeB
Function, and NODE.
The node of each RAT displayes
RAT-specific data. The common node Comm
on d a
displayes common transmission data. RA ta
Function subnets and object types of the RA T-sp
T- e
BTS3900 are consistent with those of sp cific
ec da
ific ta
single-mode base stations. da
ta
NE Navigation Tree
After an object type/function subnet under a
RAT is selected in the Object NE Navigation Tree
Type/Function Subnet navigation tree, the
topology relationship between the BTS3900
and its subnet is displayed in the NE
navigation tree.
After the GBTS or separate-MPT base station is reconstructed into the BTS3900, the NE type changes, and
the performance measurement result originally queried can no longer used. You need to modify or create a
performance measurement result query template.
2. Fault Management
Alarm Management
Maintenance Alarm
The maintenance modes of the BTS3900 and its base station controller must be set simultaneously.
The query result of the maintenance mode of the BTS3900 GU includes three status records: base station
status, status of the logical NodeB under the base station controller, and status of the logical GBTS under
the base station controller.
Main topology
Signaling Trace Management
The original trace items related to devices and transmission under each
RAT node are moved under the Base Station Device and Transport node.
3. Software Management
The software management function manages the BTS3900 as a single base station.
NE Upgrade
The BTS3900 can be upgraded only by using the Software Management Expert
3
Overall Upgrade Process on the
Software Management Expert Risk Check
Before Download
1 2 4
Download
Create a Create a View the
project. batch. reports.
Risk Check
Before Activation
All base stations The Software Management Expert upgrades NEs Activation
on the network can by batch.
View the reports,
be upgraded, The batches can be planned on the entire network
including the upgrade
including base or manually created.
report and alarm
stations of the Entire-network planning: Select the site region of the
comparison report before
same NE type. base station.
Manual creation: Select the base station controller of and after the upgrade.
The operations are The operations are the
the GU base station or the subnet of the LTE base station.
the same as those same as those for
The operations are the same as those for common
for common NEs. common NEs.
NEs.
Before downloading the new version file, Download the new Before activating the new Activate the new version file.
check the risks in the upgrade project. version file. version file, check the risks
in the upgrade project. If the upgrade batch includes LTE
If the upgrade batch includes LTE NEs, the LTE NEs and their licenses
NEs, license pre-check can be are activated at the same time.
performed to check license validity.
4. Configuration Report
The BTS3900 configuration report is added to NE reports. The Base Station RAT parameter
indicates the RATs enabled on the BTS3900.
5. License Management
After co-MPT base stations are introduced, the base station licenses are still managed based on RATs.
GSM Base Station License UMTS Base Station License LTE and M Base Station License
Management Management management
Supported base stations: Supported base stations: Supported base stations:
Co-MPT base station Single-mode NodeB eNodeB
(GSM base station in it) Co-MPT base station Co-MPT base station (LTE and M
(UMTS base station in it) (The base stations in it) (The management
management functions functions supported are the same as
supported are the same as those for eNodeBs.)
those for NodeBs.) USU
eRelay
DBS3900 IBS
The preceding part describes operation differences between the BTS3900 and common NEs. For details about
the functions supported by the BTS3900, the description of each function module in U2000 Online Help.
06 BTS3900 NE Reconstruction
1. BTS3900 RAT Extension
Add services of another RAT to a deployed co-MPT base station.
The difference between site deployment and RAT extension is as follows:
RAT-U
The NE automatic deployment function is used during BTS3900 RAT extension. For details about this function,
see RAN Management > SON Management > NE Automatic Deployment Management in U2000 Online Help.
(Local and Remote) Commissioning Process for the RAT Added to the BTS3900
Remote engineers Local engineers
1 Make preparations on a
controller side (when
newly added NEs support 2 Upload a software package.
the GSM and UMTS
modes). 3 Upload a commissioning license
(when LTE services are to be enabled).
Preparations
Hardware
12 Perform hardware installation
Installation and power-on checks.
Check
13 Monitor the NE commissioning task.
15 Handle alarms.
Commissioning
16 Check NE health.
17 Test services.
18 Acquire an NE commissioning
verification report.
19 Confirm that auto deployment tasks
are complete.
20 Set the maximum output power for
RF modules.
For details about the co-MPT base station commissioning process, see
3900 Series Base Station Commissioning Guide in 3900 Series Base Station Product Documentation
For details about the BTS3900 northbound interconnection, see Co-MPT Base Station Northbound
Interface Overview
Product Version
Wireless Network
Information Center Tech Support