Project: Construction of Warehouse Location: Sanothimi, Bhaktapur Date: Structure Type: Truss Structure & Brick Infill S. Total Rate without vat Rate without vat Total Description Unit Remarks N. Quantity (In figure) (In word) Amount 1.0 Site Clearance 1.1 Surface dressing and preparation of expose surface Including clearance of debries and bushes and management of existing drainage sludges. sft 7,200.00 2.0 Earth Work 2.1 Earth Work in excavation in foundation, etc. including dressing of sides lift up to 2.00 mtr. stacking of excavated materials beyond 2.00 mtr. Clear from the edge of excavation within a lead of 50.00 mtr. a. Ordinary Soil ( lift upto 2m) cft 2,371.00 2.2 Filling Work 2.2.1 Earth Filling including watering, ramming all comlete. Earth to be supplied from site within 50m distance from the place of filling cft 1,422.60 2.2.2 Providing and Laying Earth filling including Compaction on 450 mm layer by layer cft 19,109.00 3.0 Concrete Work 3.1 P.C.C Work Providing and Laying Machine mixed P.C.C in nominal mixed on Volumetric Proportion of 1:3:6 including the necessary side shuttering, compaction, leveling curing etc. all complete as per drawings. 3.1.1 P.C.C - Nominal Mix (1:3:6) cft 280.62 .2 R.C.C Work Providing and laying Machine mixed/ machine vibrated P.C.C in Design mixed in columns, beams, shear walls, raft, slabs, lintels, sill, bed blocks etc. including necessary ramming, leveling, curring etc. excluding the cost of Form Work and Reinforcement, as per drawings, specifications and instructions Design mix is essential). only 20mm down coarse aggregates should be used in all. M20 (Design mixed) or (1:1.5:3) cft 2,582.67 3.3 Providing and fixing in position Fe 415 & Fe500 steel reinforcement in R.C.C works including straightening, cutting, bending and binding with 20 SWG annealed wire as per drawings, specification and instruction. kg 5,160.53 3.4 Providing, fabricating, erecting, centering and shuttering of plywood formwork in footing, column & beam etc.in perfect line and level including bracing, propping, de- shuttering at all levels and heights all complete as per drawings, specifications and instructions. sft 1,845.55 4.0 Masonry Work 4.1 Brick Work Providing and laying brickwork in specified places in all heights and leveling including the cost of single or multi stage scaffolding, curint, raking joints,, provision for recesses, openins, toothing etc. all complete as per drawings, specifications and instructions. 4.1.1 Providing and laying 9" thick chimney made brick work in 1:5 cement mortar in Foundation / Superstructure cft 3,226.29 4.1.2 Providing and laying chimney made Flat brick Soling with sand filling in the gap sft 6,879.73 5.0 Door and Windows 5.1 Aluminium Door and Window 5.1.1 Providing and Fixing Windows of black Aluminium Frame (90 mm series ) with 5 mm clear float glass with gaskets and all Acessories as per drawing all complete sft 591.00 6.0 Flooring Work 6.1 Cement punning with Screeding Providing and laying 3mm neat cement punning with screed of required thickness in 1:6 cment mortar sft 4,777.25 7.0 Finishing Work 7.1 Cement Plaster Work Providing and applying cement plaster on walls and ceiling of 12- 20 mm thick and in perfect line level and plump and as per the drawings and specifications, architects, instructions all complete. SBD_JEMC| 70 7.1.1 Cement plasting on walls in 1:5 cement motar (inside & outside) sft 7,000.00 7.1.2 3mm thick cement punning in 1:1 c/s ratio sft 775.00 8.0 Painting Work Providing and applying Primer coat and minimum two coats of the approved quality paint including the cost of sccf folding as per the specifications & architects' instructions all complete 8.1 Applying Water Based Plastic Emulsion Paints on wall and ceiling ( Asian paint/ Jenson & Nicolson or equivalent) sft 3,300.00 8.2 Applying One Coat of white cement primer and Two Coat of Apex Paint as Exterior Coating sft 3,000.00 9.0 Truss work 9.1 Providing & febricating truss structure as per Structural analysis, drawing and specification with complete accessories, tools and equipments. Kg 6,930.07 10.0 Roofing works 10.1 Providing & febricating truss structure (purlin, rafer and others) as per drawing and specification with complete accessories, tools and equipments. Kg 3,774.31 10.2 Providing and laying Colored 24 gauge Corrugated Galvanized Iron sheet (thickness 0.5 mm) on roof as per drawing & specification with complete accessories,tools & equipments. sft 6,250.86 10.3 Providing and laying Colored 24 gauge Corrugated Galvanized Iron plain sheet (thickness 0.5 mm) for gutter as per drawing & specification with complete accessories, tools & equipments. rft 208.00 10.4 Providing and laying Colored 24 gauge Corrugated Galvanized Iron plain sheet (thickness 0.5 mm) for ridge cover as per drawing & specification with complete accessories, tools & equipments. rft 104.00 11.0 Iron gate 11.1 Providing & febricating sliding iron gate of 5mm thick plate and square pipe as per drawing and specification with complete sft accessories, tools and equipments. 230.00 SBD_JEMC| 70 12.0 Rainwater drainage works 12.1 Providing & installation of 110mm PVC pipeline from gutter to drainage with complete accessories, tools and equipments rft 80.00 13.0 Electrical Works 13.1 Providing & installation of 25 watt LED hanging helogen light with complete accessories, tools and Equipments Nos 12.00 13.2 Providing & installation of 42" sween cilling fan with complete accessories, tools and equipments Nos 8.00 13.3 Light point wiring with 3/22x2 with HPEP pipe conduit and all accessories, tools and equipments pts. 30.00 13.4 Power point wiring with 7/22x2 + 1/18x1 + 3/20x1 with HPEP pipe conduit and all accessories, tools and equipments pts. 10.00 13.5 10 sq.mm concentric wire for main DBB to main switch all complete rft 150.00 13.6 Providing & installation 6 way DBB with complete accessories, tools and equipments 32A DP-MCB -1 16A SP-MCB -2 10A SP-MCB -2 Set 1.00 13.7 4-gang switch with matel box and moduler switch with all complete Nos 6.00 13.8 Power socket 10/16A moduler with complete accessories, tools and equipments Nos 10.00 13.9 12 watt Bulgate waterproof light with LED bulb Nos 10.00 Total Amount of Works (Excluding VAT)