Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Locknuts
Conduit & Fittings — T&B® Rigid Fittings
on thin boxes and enclosures ⁄2" through 4" conduit (106 Series & 141AL Series)
1
Listings/Compliances
(ii) Cut through protective coating on box and
enclosure, thereby ensuring ground continuity UL (UL File No. E-23018)
CSA [catalog numbers 108, 109, 110 and 111. All 140 Series
(iii) Permit tightening from outside except catalog number 140.] (LR-2884, LR-4484)
UL 514B
(iv) Prevent loosening under vibration CSA C22.2 No. 18
NEMA FB1
• 106 Series provided with a hardened cone-point screw NFPA 70
Federal Specification replaced by A-A-50553
Federal Standard H-28 (Threads)
Case Hardened Locknuts
Case hardened locknuts make fittings faster and easier to install. Case
hardened locknuts do not slip or turn, thereby protecting the biting edge.
Case hardened locknuts bite through paint into the enclosure, providing
excellent continuity of ground (typical T&B/Thomas & Betts fitting with case
hardened locknuts successfully passed minimum fault current of 10,000
amps RMS). Case hardened locknuts, when assembled in the intended
manner, will not vibrate loose, thereby ensuring excellent ground continuity.
(B) Thickness A