Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Device features
Product selection guide
METERING CT Metering CT
Monitoring of kWh/ W/ A
Class 0.5 For kWh revenue meter application where accurate
Class 0.5/ 1/ 3 recording of energy consumption is required. 0.5%
Cast Resin or Insulated Tape Current (Ratio) Error at 100% Rated Current.
Wound Class 1 For general metering of feeder 1% Current (Ratio)
PROTECTION CT Error at 100% Rated Current.
For detection of circuit fault Class 3 For industrial load status indication purpose. 3%
condition with high peak Current (Ratio) Error at 100% Rated Current.
current handling
Protection CT
Class 5P/ 10P/ PX
Insulated Tape Wound 5P For stringent time graded coordination protection
construction scheme. 5% composite error at rated Accuracy Limit
Factor.
Standard Compliance 10P For general time coordination and instantaneous over
IEC 60044-1 for manufacturing current scheme. 10% composite error at rated
and testing method used Accuracy Limit Factor.
IP 20 Degree of Protection for Special application where protection scheme requires
PX
indoor application precise parameter defined for Knee Point Voltage,
Turn Ratio, Maximum Excitation Current at Knee Point,
Customized CT CT Secondary Resistance. (Customized built item).
MH CT are available in custom
built specification such as PX Examples of CT Specification
type requirement
Metering CT e.g. 400/5, CL1 10VA
We have over 20 years’ 400A Primary Full Load, 5A Secondary Output,
experience in making CT with 10VA Burden, Class 1
precise tolerance & special Protection CT e.g. 1600/5, 5P10 15VA
performance 1600A Primary Full Load, 5A Secondary Output,
15VA Burden, 5P10 Stringent Time Coordination with
10x Accuracy Limit Factor.
MHCT-Catalog-2015-v1
Current Transformer Standard Model Range
Pri/Sec Current VA
Technical data CL5P10 Class 0.5 Class 1 Class 3
Rating 5 15
Rated insulation 720VAC
6000/5 ● ● ● ● ● ●
voltage 5000/5 ● ● ● ● ● ●
Rated impulse 3kV/ 1min 4000/5 ● ● ● ● ● ●
voltage 3200/5 ● ● ● ● ● ●
3000/5 ● ● ● ● ● ●
Instrument Wire Distance
2500/5 ● ● ● ● ● ●
2000/5 ● ● ● ● ● ●
1600/5 ● ● ● ● ● ●
1500/5 ● ● ● ● ● ●
1200/5 ● ● ● ● ● ●
1000/5 ● ● ● ● ● ●
800/5 ● ● ● ● ● ●
600/5 ● ● ● ● ● ●
500/5 ● ● ● ● ● ●
400/5 ● ● ● ● ● ●
300/5 ● ● ● ● ● ●
200/5 ● ● ● ● ● ●
150/5 ● ● ● ● ● ●
120/5 ● - - - ● -
100/5 ● ● ● ● ● ○
80/5 ● - - - ● ○
60/5 ● ● - ● ● ○
50/5 ● - - - ● ●
40/5 ● - - - ● ●
Legend: ● standard item
○ upon request
Note: Other rating and sizes are available on customized built order.
MHCT-Catalog-2015-v1
Authorized Distributor:
MHCT-Catalog-2015-v1