Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Helle
ermanTTyton ‐ TopTTronic
TDDGGT ‐ Instructiion Maanual
7‐D er Timer (Internal Relay)
Day Digittal Geyse
Rated V
Voltage: 220
0‐240V AC Max 20 0A (3500 WWatts)
16 Proggrammable Settings Resistiive Load Ge
eyser)
15‐Day Backup Batttery Max 10 0A (Inductive Load)
IEC 607
730 Rated DIN Raail Mounted d
OPEERATING IN NSTRUCTION NS
Apply 2220V to Livee (L) terminaal and Neuttral (N) term
minal on tim
mer.
Wait for 20 second ds, then pussh recessed Reset button. Timer w will reset.
Push Clock button once. Program 1 is now set.
For timer to operate automattically press MANUAL b button until ON AUTO appears on n screen.
To operrate timer mmanually prress MANUA AL button u until ON or O
OFF appearrs on screen n.
Supply to the Geysser elementt is switched d on when tthe ON LED D is on.
To sswitch betw
ween 12h an nd 24h mod de push andd hold the Clock button n until AM d displays (12h) or not (24h).
SETTING DAY & TIME
Push and hold Clock button.
Push D+ repeatedly to adjust Day.
Push H+ repeatedly to adjust Hour.
Push M+ to adjust Minute.
Release Clock button. Time and Day is set.
PROGRAMMING TIMER
Push P button once (Program 1 ON appears). This will set the time when the Geyser element should
switch ON.
o Push D+ repeatedly until desired day is reached (various combinations of days are available). To
set for all days at once press until all 7 days are displayed (top of display).
o Push H+ repeatedly until desired hour is reached.
o Push M+ repeatedly until desired minute is reached.
Push P button once again (Program 1 OFF appears). This will set the time when the Geyser element
should switch OFF.
o Push D+ repeatedly until desired day is reached (various combinations of days are available). To
set for all days at once press until all 7 days are displayed (top of display).
o Push H+ repeatedly until desired hour is reached.
o Push M+ repeatedly until desired minute is reached.
When finished press the Clock button to exit the programming mode.
PROGRAM EXAMPLES
To set Geyser element backup to switch on from 05:00 to 06:00 in the morning:
Push P button once (Program 1 ON appears).
o Select all days by pushing D+ repeatedly until all 7 days are displayed.
o Set ON time to 05:00
Push P button once again (Program 1 OFF appears).
o Set OFF time to 06:00
To also set Geyser element backup to switch on from 18:00 to 19:00 in the afternoon:
Push P button until Program 2 ON appears.
o Select all days by pushing D+ repeatedly until all 7 days are displayed.
o Set ON time to 18:00
Push P button once again (Program 2 OFF appears).
o Set OFF time to 19:00
16 Programs can be set.
This means it is possible to set various Geyser backup times for each or different days of the week.
www.helderbergsolarenergy.com
info@helderbergsolarenergy.com
082 238 6460