Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
S.No.Description Particulars
1. Manufacturer : BHEL Bhopal.
2. Type and frame size & design code no. : Cage Rotor & 1RN7718-4
9. Degree of protection : IP 55
2
26. Starting time in sec. With mechanism : NA
coupled through Flexible coupling.
i) with rated voltage : ---
ii) with 80% of rated voltage : ---
iii) with 110% of rated voltage : ---
32. Insulation
i) Class of insulation : F, Temperature rise limited to Class’B’
ii) Material & treatment of : Epoxy Mica, Vacuum Pressure
insulation Impregnation
36. Permissible starting duty cycles : 2 Cold, 1 Hot. & 3 equally spread starts /Hr
3
38. Maximum permissible voltage during high : 150% RV , Winding overhangs are
speed suitably bus transfer & special design braced
feature.
42. Bearings
i. Number : 2
ii. Type : Sleeve
iii. Lubrication system : Forced Oil
iv. Quantity of lubrican reqd. for both the : 6.6 LPM per Bearing
bearings.
v. Life in hours at rated speed : 1,00,000 Hrs.
vi. Recommended lubricant : ISO VG 46
vii. Bearing end play : 6 ± 3 on either side.
4
viii. Inlet oil pressure :
ix. Temp. rise of oil through Bearing : 100C
x. Max. permissible temp. of Bearing : 90
xi. Max. permissible temp. of oil :
xii. Permissible running time without forced : Motor can coast down to rest.
oil at full load & full speed
xiii. Whether bearings are provided with 4 : 3 Wire PT-100, Duplex(1 on DE + 1 on NDE)
wire, platinum RTD having 100-ohm
resistance at 00C for remote temp.
indication.
xiv.Whether bearings are provided with : Yes/No
local temperature indicator having two
adjustable contacts rated for 2A at
240V AC or 0.2A at 220V DC.
xv. If forced lub oil system provided : With Pump Lube Oil System.
a) Qty of lubricant required for initial :
filling.
b) Recommended period after which : APPROVED CAT-A
53 Grounding pads size nos. & location : Two Nos. diagonally opposite,70x65x25 mm
For details refere OGA No. 14020041021
54. Method of coupling to driven mechanism : Thru’ Hydraulic Coupling.
57 Weight
i) Weight of stator (wound) :
ii) Weight of rotor (wound) : 3350 Kg.
iii) Weight of base plate. : 1650 Kg.
iv) Weight of cooler : 1300 Kg.
v) Net weight of motor : 14200 Kg
59 Thermometer provided
i) In cold air path : One DTT
ii) In hot air path : One DTT
iii) For measurement of oil temp. : No
6
7
APPROVED CAT-A
8
APPROVED CAT-A
9
APPROVED CAT-A
10
APPROVED CAT-A
11
APPROVED CAT-A
12