Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Submitted to
< Font Type: Arial, Bold, Font Size 13, 1.5 line spacing >
MASTER
IN
COMPUTER APPLICATION
< Font Type: Arial, Caps, Bold, Font Size 14, Single line spacing >
By
<Name, Enrollment No.>
< Font Type: Arial, Bold, Font Size 12>
(In TWO copies, which are to be submitted to the Department & College, Names of all batch mates along with Er
No. are to be printed)
<Name of GUIDE>
<Designation>
< Font Type: Arial, Bold, Font Size 12, Single line spacing>
Declaration
< Font Type: Arial, Italic, Font Size 16>
I hereby declare that the project entitled < PROJECT TITLE, BOLD > is the actual
work carried out by me in the department of <NAME OF THE DEPARTMENT BOLD>
under the guidance of <NAME OF THE GUIDE BOLD, Designation, Bold>.
Declaration
< Font Type: Arial, Italic, Font Size 16>
CERTIFICATE
< Font Type: Arial, Italic, Font Size 16>
(NAME OF PRINCIPAL)
Principal
SHREE SAI INSTITUTE OF TECHNOLOGY
(Approved by AICTE Delhi, Affiliated to RGTU Bhopal and Govt. of Madhya Pradesh)
CERTIFICATE
< Font Type: Arial, Italic, Font Size 16>
(NAME OF PRINCIPAL)
Principal
Note: This format is to be replaced with the individual CERTIFICATE
in TWO common copies only, which are to be submitted to the Department & College.
ACKNOWLEDGEMENTS
< Font Type: Arial, Bold, Font Size 16>
Guide
Head
Principal, Dean, and Vice principal
Any specific persons/organization to whom they want to express gratitude
Department faculty members
Lab technicians and other supporting staff
Any others like friends, relatives etc.
Abstract (i)
List of Table (ii)
List of Figures (iii)
1. INTRODUCTION
1.1 GENERAL
1.2 .... .........
1.2.1 …………….
1.2.2 ...........
1.3 . . . . . . . . . . .. . . . . . .
1.4 ..................
2. LITERATURE REVIEW
2.1 GENERAL
2.2. . . . . . . . . .
2.3 …………….
3. METHODOLOGY/EXPERIMENTATION
5. CONCLUSIONS
6. REFERENCES
ABSTRACT
< Font Type: Arial, Bold, Font Size 14>
The dimension of the project report should be in A4 size. The project report
should be bounded using flexible cover with different colors specified
department wise. The text on the cover page should be embossed with
black Color & the text for printing should be identical.
Margins :
Top : 1” (1 inch=2.54cm)
Bottom : 1.15” (2.86cm)
Left : 1.5”
Right : 0.6”
PREPARATION FORMAT:
List of Tables – The list should use exactly the same captions as they appear above
the tables in the text. One and a half spacing should be adopted for typing the
matter under this head.
List of Figures – The list should use exactly the same captions as they appear below
the figures in the text. One and a half spacing should be adopted for typing the
matter under this head.
List of References –The listing of references should be typed 4 spaces below the
heading “REFERENCES” in alphabetical order in single spacing left – justified.
The reference material should be listed in the alphabetical order of the first
author. The name of the author/authors should be immediately followed by the
year and other details.
A typical illustrative list given below relates to the citation example quoted
above.
References:
1. Ariponnammal, S. and Natarajan, S. (1994) „Transport Phenomena of
Sm Sel – X Asx‟, Pramana – Journal of Physics Vol.42, No.1, pp.421-
425.
3. Shin, K.G. and Mckay, N.D. (1984) „Open Loop Minimum Time Control of
Mechanical Manipulations and its Applications‟, Proc.Amer.Contr.Conf.,
San Diego, CA, pp. 1231-1236.
One and a half spacing should be used for typing the general text with
justification on left & right i.e. justify the text with 1.5 spacing. The general
text shall be typed in the Font style ‘Arial’ and Font size 12. The heading text
shall be typed in the Font style ‘Arial’ Bold and Font size 14. The sub heading
text shall be typed in the Font style ‘Arial’ Bold, Italic and Font size 12. The
numbering of the pages should be done at the middle of the bottom.
You have to compulsory add chapter page before starting of each chapter