Sei sulla pagina 1di 7

A COMPARATIVE STUDY OF BUBBLE DECK SLAB AND

CONVENTIONAL DECK SLAB

by
Mrinank Pandey
(1201302003)
B.Tech in Civil Engineering

SCHOOL OF CIVIL ENGINEERING


GALGOTIAS UNIVERSITY
GREATER NOIDA
A COMPARATIVE STUDY OF BUBBLE DECK SLAB AND
CONVENTIONAL DECK SLAB

by
Mrinank Pandey
(1201302003)

Submitted in partial fulfilment of the requirements of the degree of


Bachelor of Technology in Civil Engineering

Under the guidance of


Rajesh Kumar Rai

SCHOOL OF CIVIL ENGINEERING


GALGOTIAS UNIVERSITY
GREATER NOIDA
May, 2018
To

My Parents

&

Family
CERTIFICATE

This is to certify that the project work entitled "A Comparative Study Of Bubble Deck

Slab And Conventional Deck Slab" being submitted by Mrinank Pandey to the School

of Civil Engineering, Galgotias University, Greater Noida, for the award of the degree of

Bachelor of Technology is a bonafied work carried out by him under my supervision and

guidance. The thesis work in my opinion has reached the requisite standard, fulfilling the

requirements for the said degree.

The results contained in this report have not been submitted, in part or full, to any other

university or institute for the award of any degree or diploma.

Guide Co-Guide

Program chair Dean


B.Tech (Civil Engineering) School of Civil Engineering

Internal Examiner External Examiner


APPROVAL SHEET

This project report entitled "A Comparative Study of Bubble Deck Slab and

Conventional Deck Slab" by Mrinank Pandey is approved for the degree of Bachelor

of Technology in Civil Engineering.

Examiner

_______________________

_______________________

_________________________

Guide Co-Guide

_______________________ _______________________

_______________________ _______________________

_______________________ _______________________

Dean

_____________________

Date: ____________

Place: ___________
DECLARATION

I declare that this written submission represents my ideas in my own words and where

others' ideas or words have been included, I have adequately cited and referenced the

original sources. I also declare that I have adhered to all principles of academic honesty

and integrity and have not misrepresented or fabricated or falsified any

idea/data/fact/source in my submission. I understand that any violation of the above will be

cause for disciplinary action by the Institute and can also evoke penal action from the

sources which have thus not been properly cited or from whom proper permission has not

been taken when needed.

_____________

Mrinank Pandey

(1201302003)

Date: ____________

Place: ___________
Note:

This section:
1. This section has NO page numbers.
2. All headings are in font size-14 (Times New Roman) single (1) line spacing.
3. Texts are in font size-12 (Times New Roman) 1.5 line spacing.
4. Dedication section could be anything...depends on individual…It is OPTIONAL.
5. In case of two supervisors-mention both name otherwise put single supervisor
ONLY.
6. Hologram of university must be coloured.
7. Every heading shall be numbered and NOT bulleted. For example -
1.1.1...1.1.2...etc.
8. Every figure and table shall be numbered like
Fig. 1.1. the title of figure........
Plate 1.1. the title of plate........
Similarly for the table
Table 1.1. the title of table........

General:
1. You need to present four copies of project report, but this should be done after
verification from your representative GUIDE so that NO error will be crept/lag after
printing.
2. You are advised NOT to change the format of project report. It has been found that
many students put school name in header and some other things in footer of project report
or changing some of the table format or font style. You are advised to just ADHERE to
the given format.
3. DO NOT print the report in colour. It should be B/W unless justified the need of
colour paper.
4. At the time of external viva, every one would have a separate copy.
5. Other non-mentioned items could be followed from ASCE Journal format such as
references, figure and table style (http://rairkz.wix.com/rairkz#!students/c1lhx).

In short:
1. Your project report shall be 50 to 80 pages long (NOT exceed 100 pages).
2. All pages shall be printed on single side only.
3. Times New Roman font 12, 1.5 line spacing (already mentioned in template).
4. Page numbering has been mentioned in template. (In 1.docx there is no numbering; In
2.docx numbering has been done in Roman numbers; In 3.docx numbers are as usual,
decimal number).
5. For your convenience, word documents should be kept separate as is given like 1.docx;
2.docx; and 3.docx.. Later, you may convert it into pdf and then combine it in one copy
for print or archive.
6. Cover of report is dark BLUE and imprint (typed) in GOLDEN colour (Hard bind
copy).

Potrebbero piacerti anche