Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
How to find the serial number of the tablet? It is at the back of the tablet as follows:
Tips: The battery level should be over 50% before flashing the system
Prepared Tools: 8GB USB Flash Disk, USB-OTG Cable, HUB (over 3 interfaces)
and the USB keyboard.
As follows:
Please format the second USB flash disk into the format of NTFS, rename it as
“WINPE”.
Copy the unzipped image files to the Root directory of the USB flash disk in the
format of FAT32 as follows:
Copy the “images” file to the second USB flash disk in NTFS format
The tablet connects Hub. Put the USB flash disk into the Hub, and then plug the Hub
in keyboard as the picture shows:
The ports in the hub are in order. The first USB flash disk should be put into the port
firstly.
Please press the power button of the tablet and simultaneously click “F7”of the
keyboard continuously to enter the boot mode.
And then put the second USB flash disk in NTFS format into the HUB.
Choose the first row “UEFI: SanDisk SanDisk Ultra PMAP, Partition 1” to flash
the system automatically.
Press “Enter” button to program. When the programming is finished, the tablet will
shut off automatically as follows:
The programming will last about 5 to 10 minutes; the precise time is dependent of
Hub and U disk. The introduction is on basis of using the U disk 3.0. The
programming lasts about 5 minutes.