Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Considering geometry it seems that our structure will not face any uplift
hence no tension force in bolts same is proved in next calculation.
Geometric configuration
2) Live load
1.5KN/Sq.m live load is considered on platform.
3) Wind load in X- Dir.
On conservative side lets assumed load 4 time as we have four column of platform.
P= 6.28 KN (Total vertical force)
H= 1.8 KN (Total Sliding force)
D ] Combined footing /pad for platform 4-columns.
P= 6.28 KN
A= 1.9125 Sq.m.(=1.530*1.250)
****************************************************
* *
* STAAD.Pro V8i SELECTseries5 *
* Version 20.07.10.41 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= FEB 3, 2018 *
* Time= 13:26:15 *
* *
* USER ID: Bechtel Corp *
****************************************************
1. STAAD SPACE
INPUT FILE: Structure1.STD
2. START JOB INFORMATION
3. ENGINEER DATE 03-FEB-18
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0.45 0; 2 0 0.45 0.95; 3 1.23 0.45 0; 4 1.23 0.45 0.95; 5 0 1.32 0
9. 6 0 1.32 0.95; 7 1.23 1.32 0; 8 1.23 1.32 0.95; 9 0 1.92 0; 10 0 1.92 0.95
10. 11 1.23 1.92 0; 12 1.23 1.92 0.95; 13 0 2.38 0; 14 0 2.38 0.95; 15 1.23 2.38 0
11. 16 1.23 2.38 0.95; 17 0 0 0; 18 0 0 0.95; 19 1.23 0 0; 20 1.23 0 0.95
12. 21 0.73 1.92 0.95; 22 0.73 2.38 0.95; 23 0.73 1.32 0.95
13. MEMBER INCIDENCES
14. 1 1 2; 2 1 3; 3 2 4; 4 3 4; 5 5 6; 6 5 7; 7 6 23; 8 7 8; 9 9 10; 10 9 11
15. 11 10 21; 12 11 12; 13 13 14; 14 13 15; 15 14 22; 16 15 16; 17 1 5; 18 2 6
16. 19 3 7; 20 4 8; 21 5 9; 22 6 10; 23 7 11; 24 8 12; 25 9 13; 26 10 14; 27 11 15
17. 28 12 16; 29 17 1; 30 18 2; 31 19 3; 32 20 4; 35 21 22; 36 23 8; 37 23 21
18. DEFINE MATERIAL START
19. ISOTROPIC STEEL
20. E 2.05E+008
21. POISSON 0.3
22. DENSITY 76.8195
23. ALPHA 1.2E-005
24. DAMP 0.03
25. TYPE STEEL
26. STRENGTH FY 253200 FU 407800 RY 1.5 RT 1.2
27. END DEFINE MATERIAL
28. MEMBER PROPERTY BRITISH
29. 5 TO 8 17 TO 20 29 TO 32 36 TABLE ST UA75X75X6
30. 9 TO 16 21 TO 28 35 37 TABLE ST PIP213.2
31. 1 TO 4 TABLE ST UA40X40X5
32. CONSTANTS
33. BETA 45 MEMB 1 3 5 7 18 30 36
34. BETA 135 MEMB 20 32
35. BETA 315 MEMB 2 4 6 8 17 29
36. BETA 225 MEMB 19 31
37. MATERIAL STEEL ALL
38. SUPPORTS
39. 17 TO 20 PINNED
40. DEFINE WIND LOAD
*** NOTE: If any floor diaphragm is present in the model Wind Load definition
should be defined after Floor Diaphragm definition. Otherwise wind
load generation may be unsuccessful during analysis.
P R O B L E M S T A T I S T I C S
-----------------------------------
61. PARAMETER 1
62. CODE BS5950
63. BEAM 3 ALL
65. FINISH
************************************************************
* For technical assistance on STAAD.Pro, please visit *
* http://selectservices.bentley.com/en-US/ *
* *
* Details about additional assistance from *
* Bentley and Partners can be found at program menu *
* Help->Technical Support *
* *
* Copyright © 1997-2013 Bentley Systems, Inc.
* http://www.bentley.com *
************************************************************