Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CONCRETE ANCHORS
AND FIXINGS
Ver.02
OUR VISION
Becoming the number 1 in the eyes of
our customers as the best and most
qualified sales team.
OUR MISSION
We love selling.
We inspire our customers.
OUR PRINCIPLES
We request and promote achievements.
The greater the success, the more freedom and liberty.
We are optimistic, dynamic and have powers of self-assertion.
We passionately fight for success.
We consistently pursue everything that has proven to be successful, and we try out
new things.
We strive for perfection in every area of our activities.
We assume responsibility for our actions, work in mutual respect and appreciation
and are straightforward and predictable in everything we do.
The term we consider most important in
dealing with each other is “Thank You”.
- Auto Workshops
- Construction Companies
WE SERVE THE FOLLOWING - Metal and Fabrication
MARKET SECTOR: - Oil and Gas Sector
- Maintenance and Repair Shops
- Industrial Companies
- And all other Manufacturing Sectors.
To each customer Würth allocates our Sales Consultant, who is strongly focused on the individual needs of the client. We have adopted this at-
titude to benefit you, the customer. Our daily commitment helps us to find new approaches so that we always improve. We aim to supply every
customer with every article at any time in any place. We therefore have developed modular systems and logistics tailored to the individual needs
of the customers. In October 2009, we won the German Logistics Award for this concept.
Our philosophy
We owe it to Reinhold Würth that the Würth Group has a clear business orientation: It is marked by a strong brand policy, future-oriented product
strategy, closeness to the customer, clear quality offensive, thinking in terms of visions and not least by a strong corporate culture. Bettina Würth,
Reinhold Würth’s daughter and Chairwoman of the Advisory Board together with the members of the Central Managing Board see to it that these
values are filled with life and developed further.
CONTENT
Mechanical Heavy Duty Anchors
Fixanchor W-FAZ/S 06 - 07
Fixanchor W-FAZ/A4, W-FAZ/HCR 08 - 09
Fixanchor W-FAZ-IG/S 10 - 12
Fixanchor W-FAZ-IG/A4, W-FAZ-IG/HCR 13 - 15
High Performance Anchor W-HAZ/S 16 - 19
High Performance Anchor W-HAZ/A4 20 - 21
High Performance Anchor W-VIZ/S and WIT-VM 100 22 - 25
High Performance Anchor W-VIZ/A4 and WIT-VM 100 26 - 30
Hollow Ceiling Anchor W-HD 31 - 32
Fixanchor W-FA/S, W-FA/F 33 - 35
Fixanchor W-FA/A4, W-FA/HCR 36 - 37
Drop-in Anchor W-ED/S 38 - 39
Drop-in Anchor W-ED/A4 40 - 41
Chemical Anchors
Bonded Anchor/ Capsule system W-VP 42 - 43
Injection System WIT-PE 500 44 - 46
Injection System WIT-VM 250 47 - 50
Cleaning Accessories 50
Threaded rods 51
Benefits:
• All the many approvals guarantee its
reliable function for all applications even in
cracked and non-cracked concrete.
• The optimized unit of cone bolt and expansion
sleeve avoids concrete spalling at smallest edge
distances too.
• The length identifier on the front end of the bolt
Machine Setting Tool facilitates the inspection of correct installation.
Art. No. 0904 908 016 • The multitude of types offers the most economic
anchor for all applications in any case. In
particular the one with the big washer is mainly
used in timber construction.
Applications:
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Through-fastening
Metal structures, metal profiles, brackets, foot plates, supports, cable
Suitable for Cracked concrete
conduits, piping, railings, wooden structures, beams. Non-cracked concrete
06
W-FAZ/S
W-FAZ/S
h1
hef tfix
FIXANCHOR W-FAZ/S
hmin
Benefits:
• All the many approvals guarantee its
reliable function for all applications even in cracked
and non-cracked concrete.
• The optimized unit of cone bolt and expansion sleeve
avoids concrete spalling at smallest edge distances
too.
• The length identifier on the front end of the bolt
Machine Setting Tool facilitates the inspection of correct installation.
Art. No. 0904 908 016
• The multitude of types offers the most economic
anchor for all applications in any case. In particular
the one with the big washer is mainly used in timber
construction.
Applications:
Technical Data:
Head configuration Externally threaded
Environmental conditions
Indoor, outdoor
Material composition A4 stainless steel / HCR Highly
corrosion-resistant steel
Type of fastening Through-fastening
Cracked
Suitable for concrete
Metal structures, metal profiles, brackets, foot plates, supports, Non-cracked concrete
cable conduits, piping, railings, wooden structures, beams.
08
W-FAZ/A4
W-FAZ/A4
FIXANCHOR W-FAZ/A4 h1
hef tfix
hmin
Benefits:
+ + • All screws/bolts available in the product line can be
Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B used for both pre fastening and through fastening.
• Immediately loadable – no waiting time.
Cotter-pin installation Through-bolt mounting • Also suitable for temporary fastening
(pre fastening, e.g. stadium seats for flexible use flush
+ + with surface without danger of injury).
+ +
Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B
Important information!
Please only set the W-FAZ-IG fixing anchor together with the
l
related, approval-conformant setting tools (anchor system).
Applications: l Hexagon bolts, countersunk head screws, washers, countersunk
head washers and nuts are specially coated and only permissible Technical Data:
st Reports Important information!
in anchor system in accordance with ETA-02/0017. Therefore,
l Pleaseplease
only setorder separately
the W-FAZ-IG fixingatanchor
the same timewith the 1) (see product
together Head configuration Inner thread
Fire information,
related Page 3).setting tools (anchor system).
approval-conformant Environmental conditions Indoor, dry conditions
l Hexagon
l Commonbolts, countersunk head screws, 2) washers, countersunk
esistance threaded rods may only be used if the conditions Material composition Steel, galvanized
head washers and nuts are specially coated and only permissible
specified
systeminin the approval withETA-02/0017 (Appendix5, Table 3)
ect flame effect in anchor accordance ETA-02/0017. Therefore, Pre
Type of fastening fastening /
F30 – F120 please(material quality,atdimensions,
order separately the same timemechanical properties
1) (see product according
TK-DIN 4102-2: to EN10204:2004)
information, Page 3). are met. Through-fastening
1977-09)
l The threaded
l Common torque necessary
rods ) for
mayanchoring can
only be used beconditions
if the applied with Würth for Cracked concrete
2
specified in thewrenches
approval ETA-02/0017
Suitable
torque and suitable(Appendix
attachments 5, Table 3)
(insertion open-end Non-cracked concrete
(material quality, dimensions, mechanical properties according
wrench).
to EN 10204:2004) are met.
The torque necessary for anchoring can be applied with Würth
l
Metal structures, metal
torque profiles,
wrenches and suitable attachments (insertion open-end
l Immediately
brackets, foot plates,
wrench). supports,loadable – no waiting time
l Fixing anchor cone with patented plastic coating enables reliable expansion later
ackets, footcable
plates,conduits, piping,
2. Advantages
l Elegant appearance thanks to countersunk head screws for visible fastening with Range of loading: C20/25
eams, stadium
railings, wooden simultaneous
l High loads, highand
small axle bases load-bearing capacity (e.g. railings)
edge clearances
ot plates, supports, l All lscrews/bolts available in the product line (see product information, Page 3) can be used
Also suitable for temporary Size M6 M8 M10 M12
s, reinforced
ned etc. or non- for both cotter-pin and through-bolt mountingfastening (cotter-pin mounting, e.g. stadium seats for
or non-reinforced l Can be flexible use – flush
loaded immediately with
– no waitsurface
time without danger of injury) hef [mm] 45 58 65 80
0/25
50/60 and at most
in accordance l Fixed
l anchor
Reliable coneinstallation
with patented due
plastictocoating facilitates of
application reliable later expansion
prescribed torque
l Elegant appearance thanks to countersunk head screws for visible fastening with Non-cracked concrete
(concrete tensile zone) simultaneous high load-bearing capacity (e.g. railings)
ncrete
re app
out
(concrete
zone)roval)
l 3. Properties
Also suitable for temporary fastening (cotter-pin mounting, e.g. stadium seats for flexible
use – flush with surface without danger of injury)
Nrec [kN] 4.8 6.3 7.9 11.9
Vrec1) [kN] 3.3 3.9 5.9 14.7
own
one weight, l l Force-controlled/torque-controlled
Reliable spreading anchor of electrogalvanized steel
installation due to application of prescribed torque
gs) in the sizes M6, M8, M10 and M12 Vrec2) [kN] 2.9 4.3 6.2 13.9
tdoors
ads
(including
specially aggressive con- 3. Properties
l Galvanized steel M6 – M12: ETA-02/0017 for individual fastening Cracked concrete
cderloads l (Option 1, uncracked spreading
Force-controlled/torque-controlled and crackedanchor concrete)
of A4 stainless steel in the sizes M6,
Nrec [kN] 2.0 3.6 4.8 7.9
especially M8,l M10 and M12
lternating immersion in Dimensioned in accordance with the “European Technical App roval Guideline
Stainless steel A4 and HCR highly corrosion resistant steel, M6 – M12:
ooms
orine in indoor pools
l
(ETAG)forfor
ETA-02/0017 Metalfastening
individual Anchors for 1,Anchoring
(Option uncracked and in cracked
Concrete”,
concrete)Part 2 (ETAG 001-2) Vrec1) [kN] 3.3 3.9 5.9 14.7
l l Fire resistance
Dimensioned in accordance (anchoring base:Technical
with the “European concrete App C20/25 to C50/60):
roval Guideline (ETAG) for R30, R60, R90, Vrec2) [kN] 2.9 4.3 6.2 13.9
Metal Anchors for Anchoring in Concrete”, Part 2 (ETAG 001-2)
R120:(anchoring
Fire resistance Technical Report
base: concreteTRC20/25
020 “Assessment
to C50/60): of anchoring in concrete with regard 1) 2)
l
to the
R30, R60, R90,fire resistance”
R120: (included
Technical Report TR 020in“Assessment
ETA-02/0017)
of anchoring in concrete for pre fastening for through fastening
Installation:
rmation, Page 3)
with regard to the fire resistance” (included in ETA-02/0017)
F30, F60, F90, F120 (W-FAZ-IG/A4): Fire stress pursuant to DIN 4201-2:1977-09
(ETK – Einheitstemperaturkurve (uniform temperature curve))
Flush Installation Through Installation
Through-bolt mounting
Through-bolt mounting
10
Apply torque Drill hole Clean drilled
hole
Knock in anchor
with setting tool
Apply torque
Pre
fastening do h 2 l tfix tfix ØxlG
mm mm mm mm mm mm Qty.
W-FAZ-IG/S M6-12-14/50 0904 706 110 8 60 50 12 14 M6 x 20 100
W-FAZ-IG/S M8-8-15/62 0904 708 110 10 75 62 8 15 M8 x 22 50
W-FAZ-IG/S M10-11-19/70 0904 710 110 12 90 70 19 11 M10 x 23 25
W-FAZ-IG/S M12-14-21/86 0904 712 110 16 105 86 21 14 M12 x 27 20
Through fastening
Screw hexagon head DIN 933
Pre fastening
tfix ØxlG SW
mm mm Qty.
11
W-FAZ-IG/S
Countersunk Screw DIN7991
Pre - fastening
tfix ØxlG SW
mm mm Qty.
Typ SK M6 x 25 0904 706 130 8.8 6-14 M6 x 25 Tx 30 100
Typ SK M8 x 30 0904 708 130 8.8 9-15 M8 x 30 Tx 40 50
Typ SK M10 x 30 0904 710 130 8.8 8-11 M10 x 30 Innen 6-kt. 6mm 25
Typ SK M12 x 35 0904 712 130 8.8 9-14 M12 x 35 Innen 6-kt. 8mm 20
Through fastening
++ +
Ty p e B
Pre fastening
Ty p e S Ty p e S K Ty p e B
0904 706 150 0904 708 150 0904 710 150 0904 712 150
washer 1)
ETA-02/0017)
Through fastening
+
rete surface)
0904 706 050 0904 708 050 0904 710 050 0904 712 050
approval-conformant setting tools (anchor system). specified in the approval ETA-02/0017 (Appendix 5, Table 3)
n bolts, countersunk head screws, washers, countersunk(material quality, dimensions, mechanical properties according
ashers and nuts are specially coated and only to EN 10204:2004) are met.
permissible
r system in accordance with ETA-02/0017. Therefore,l The torque necessary for anchoring can be applied with Würth
rder separately at the same time torque
1) (see wrenches and suitable attachments (insertion open-end
product
on, Page 3). wrench).
n threaded rods 2 ) may only be used if the conditions
d in the approval ETA-02/0017 (Appendix 5, Table 3) 2. Advantages
l quality, dimensions, mechanical properties according
l High loads, small axle bases and edge clearances
es, brackets, foot
0204:2004) areplates,
met. supports, l All screws/bolts available in the product line (see product information, Page 3) can be used
ms, stadium seats, etc.
ue necessary for anchoring can be applied for both cotter-pin and through-bolt mounting
with Würth
used in reinforced or non-reinforced l Can be loaded immediately – no wait time
wrenches andC50/60
5 and at most suitableinattachments
accordance (insertion open-end
l Fixed anchor cone with patented plastic coating facilitates reliable later expansion
l Elegant appearance thanks to countersunk head screws for visible fastening with
ed concrete (concrete tensile zone) simultaneous high load-bearing capacity (e.g. railings)
antages
e)
ural stone (without app roval)
l Also suitable for temporary fastening (cotter-pin mounting, e.g. stadium seats for flexible
use – flush with surface without danger of injury)
small axle (e.g.
atic loads basesown andweight,
edge clearances l Reliable installation due to application of prescribed torque
.olts available
façades, in the product line (see product information, Page 3) can be used
railings)
ndoor rooms, outdoors mounting
er-pin and through-bolt
ded
ooms immediately
12
– no wait time
(including
if no especially aggressive con- 3. Properties
r cone with patented plastic coating facilitates reliable later expansion
earance l Force-controlled/torque-controlled spreading anchor of A4 stainless steel in the sizes M6,
an be usedthanks to countersunk
under especially head screws for visible fastening with
M8, M10 and M12
sg.high load-bearing
continuous, capacity
alternating (e.g. railings)
immersion in
ee for temporary fastening (cotter-pin mounting, l Stainless
e.g. stadium steel A4
seats for and HCR highly corrosion resistant steel, M6 – M12:
flexible
containing chlorine in indoor pools ETA-02/0017 for individual fastening (Option 1, uncracked and cracked concrete)
with surface without danger of injury)
W-FAZ-IG/A4, W-FAZ-IG/HCR
FIXANCHOR W-FAZ-IG/A4, W-FAZ-IG/HCR Approved for:
Concrete C20/25 to C50/60
Cotter-pin installation Through-bolt mounting
Benefits:
• All screws/bolts available in the product line
+ + can be used for both pre fastening and through
Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B fastening
–
• Immediately loadable – no waiting time.
• Also suitable for temporary fastening
Cotter-pin installation Through-bolt mounting (pre fastening, e.g. stadium seats for flexible
+ +
use- flush with surface without danger of injury)
+ +
7)
Ty p e S Type SK Ty p e B Ty p e S Ty p e S K Ty p e B
Machine Setting
+ Tool +
Approvals and Certificates:
2.3.Advantages
Properties
outdoors (including
o especially aggressive con- Range of loading: C20/25
l l Force-controlled/torque-controlled
High loads, small axle bases and edgespreading clearances anchor of A4 stainless steel in the sizes M6,
otunder especially
plates, supports, l All M8, M10 andavailable
screws/bolts M12 in the product line (see product information, Page 3) can be used Size M6 M8 M10 M12
s,s, alternating
etc. immersion in l Stainless
for steel A4
both cotter-pin andand HCR highly
through-bolt corrosion resistant steel, M6 – M12:
mounting
chlorine in indoor pools
ed or non-reinforced l CanETA-02/0017 for individual
be loaded immediately fastening
– no (Option 1, uncracked and cracked concrete)
wait time hef [mm] 45 58 65 80
50/60 in accordance l l Dimensioned
Fixed anchor cone in accordance
with patentedwith the “European
plastic Technical
coating facilitates App later
reliable roval Guideline (ETAG) for
expansion
l Metalappearance
Elegant Anchors forthanks
Anchoring in Concrete”,
to countersunk head Partscrews
2 (ETAG 001-2)fastening with
for visible Non-cracked concrete
(concrete tensile zone) l Fire resistance
simultaneous high(anchoring
load-bearing base: concrete
capacity (e.g.C20/25
railings)to C50/60):
l AlsoR30, R60,for
suitable R90, R120: fastening
temporary Technical(cotter-pin
Report TRmounting,
020 “Assessment of anchoring
e.g. stadium seats for in concrete
flexible Nrec [kN] 4.8 6.3 7.9 11.9
out app roval) usewith regard
– flush
F30, F60,
withtosurface
the firewithout
F90, F120
resistance” (included
danger in ETA-02/0017)
of injury) Vrec1) [kN] 3.3 5.3 6.1 13.5
own weight, l Reliable installation due to (W-FAZ-IG/A4): Fire stresstorque
application of prescribed pursuant to DIN 4201-2:1977-09
gs) (ETK – Einheitstemperaturkurve (uniform temperature curve)) Vrec2) [kN] 4.2 4.3 5.5 16.9
tdoors (including
specially aggressive con- 3. Properties Cracked concrete
l Force-controlled/torque-controlled spreading anchor of A4 stainless steel in the sizes M6,
der especiallyMetal structures, metaland profiles,
M8,Through-bolt
M10 M12 mounting brackets, foot plates, supports, Nrec [kN] 2.0 3.6 4.8 7.9
lternating immersion in l Stainless steel A4 and HCR highly corrosion resistant steel, M6 – M12:
orine in indoorcable
pools conduits, piping,forrailings,
ETA-02/0017 wooden
individual fastening structures,
(Option 1, uncrackedbeams, stadium,
and cracked concrete)
Vrec1) [kN] 3.3 5.3 6.1 13.5
seats.
l Dimensioned in accordance with the “European Technical App roval Guideline (ETAG) for
Metal Anchors for Anchoring in Concrete”, Part 2 (ETAG 001-2)
Vrec2) [kN] 4.2 4.3 5.5 16.9
l Fire resistance (anchoring base: concrete C20/25 to C50/60): 1) 2)
R30, R60, R90, R120: Technical Report TR 020 “Assessment of anchoring in concrete for pre fastening for through fastening
Installation: with regard to the fire resistance” (included in ETA-02/0017)
F30, F60, F90, F120 (W-FAZ-IG/A4): Fire stress pursuant to DIN 4201-2:1977-09
(ETK – Einheitstemperaturkurve (uniform temperature curve))
Flush Installation Through Installation
hor Apply torque Drill hole Clean drilled Knock in anchor Apply torque
ool Through-bolt mounting
hole with setting tool
Apply torque Drill hole Clean drilled Knock in anchor Apply torque 13
hole with setting tool
W-FAZ-IG/A4, W-FAZ-IG/HCR
Article description Art. No. Drill dia. Min. drill hole Anchor Fixture Fixture Thread
depth length thickness thickness size PU
Typ S Typ SK
Pre
fastening do h 2 l tfix tfix ØxlG
mm mm mm mm mm mm Qty.
W-FAZ-IG/A4 M6-12-14/50 0904 806 110 8 60 50 12 14 M6 x 20 100
W-FAZ-IG/A4 M8-8-15/62 0904 808 110 10 75 62 8 15 M8 x 22 50
W-FAZ-IG/A4 M10-11-19/70 0904 810 110 12 90 70 19 11 M10 x 23 25
W-FAZ-IG/A4 M12-14-21/86 0904 812 110 16 105 86 21 14 M12 x 27 20
Through fastening
Screw hexagon head DIN 933
Pre fastening
tfix ØxlG SW
mm mm Qty.
14
W-FAZ-IG/A4, W-FAZ-IG/HCR
Countersunk Screw DIN7991
Pre - fastening
tfix ØxlG SW
mm mm Qty.
Typ SK M6 x 25 0904 806 130 A4 6-14 M6 x 25 Tx 30 100
Typ SK M8 x 30 0904 808 130 A4 9-15 M8 x 30 Tx 40 50
Typ SK M10 x 30 0904 810 130 A4 8-11 M10 x 30 Innen 6-kt. 6mm 25
Typ SK M12 x 35 0904 812 130 A4 9-14 M12 x 35 Innen 6-kt. 8mm 20
Through fastening
++ +
Ty p e B
Pre fastening
Ty p e S Ty p e S K Ty p e B
0904 706 150 0904 708 150 0904 710 150 0904 712 150
washer 1)
ETA-02/0017)
Through fastening
+
rete surface)
0904 706 050 0904 708 050 0904 710 050 0904 712 050
approval-conformant setting tools (anchor system). specified in the approval ETA-02/0017 (Appendix 5, Table 3)
n bolts, countersunk head screws, washers, countersunk(material quality, dimensions, mechanical properties according
ashers and nuts are specially coated and only to EN 10204:2004) are met.
permissible
r system in accordance with ETA-02/0017. Therefore,l The torque necessary for anchoring can be applied with Würth
rder separately at the same time torque
1) (see wrenches and suitable attachments (insertion open-end
product
on, Page 3). wrench).
n threaded rods 2 ) may only be used if the conditions
d in the approval ETA-02/0017 (Appendix 5, Table 3)2. Advantages
l quality, dimensions, mechanical properties according
l High loads, small axle bases and edge clearances
es, brackets, foot
0204:2004) areplates,
met. supports, l All screws/bolts available in the product line (see product information, Page 3) can be used
ms, stadium seats, etc.
ue necessary for anchoring can be applied for both cotter-pin and through-bolt mounting
with Würth
used in reinforced or non-reinforced l Can be loaded immediately – no wait time
wrenches andC50/60
5 and at most suitableinattachments
accordance (insertion open-end
l Fixed anchor cone with patented plastic coating facilitates reliable later expansion
l Elegant appearance thanks to countersunk head screws for visible fastening with
ed concrete (concrete tensile zone) simultaneous high load-bearing capacity (e.g. railings)
antages
e)
ural stone (without app roval)
l Also suitable for temporary fastening (cotter-pin mounting, e.g. stadium seats for flexible
use – flush with surface without danger of injury)
small axle (e.g.
atic loads basesown andweight,
edge clearances l Reliable installation due to application of prescribed torque
.olts available
façades, in the product line (see product information, Page 3) can be used
railings)
er-pin and through-bolt mounting
ndoor rooms, outdoors
ded
oomsimmediately
(including
– no waitaggressive
if no especially time con- 3. Properties 15
r cone with patented plastic coating facilitates reliable later expansion
l Force-controlled/torque-controlled spreading anchor of A4 stainless steel in the sizes M6,
an be used under especially head screws for visible
earance thanks to countersunk fastening with
M8, M10 and M12
sg.high load-bearing
continuous, capacity
alternating (e.g. railings)
immersion in
e for temporary fastening (cotter-pin mounting, e.g. l Stainless steel A4
stadium seats for and HCR highly corrosion resistant steel, M6 – M12:
flexible
W-HAZ/S
HIGH-PERFORMANCE ANCHOR W-HAZ/S Approved for:
Concrete C20/25 to C50/60
W-HAZ-B
Benefits:
• The bolt is attuned to the sleeve to make this anchor a
reliable specialist for highest shear load demands.
• Various head types allow tidy finishes and avoid risk
W-HAZ-S of injury when using for machine bases.
• The optimized combination of expansion sleeve and
cone bolt allow smallest spacing and thus small
cost-efficient anchor plates.
W-HAZ-SK
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Through-fastening
Suitable for fastening metal constructions, metal profit Cracked
Suitable for concrete
less, brackets, foot plates, supports, cable conduits, pipes, Non-cracked concrete
railings, machines, etc.
Installation:
16
W-HAZ/S
Min. drill
Article description Art. No. Drill dia. hole depth Anchor Fixture Wrench PU
for through Length thickness Size
fastening
do h 2 l tfix SW
mm mm mm mm Qty.
W-HAZ-B/S-0-M6x67 0905 210 101 10 65 67 0 10 100
W-HAZ-B/S-10-M6x77 0905 210 102 10 75 77 10 10 50
W-HAZ-B/S-30-M6x97 0905 210 103 10 95 97 30 10 50
W-HAZ-B/S-50-M6x117 0905 210 104 10 115 117 50 10 50
W-HAZ-B/S-100-M6x167 0905 210 105 10 165 167 100 10 25
W-HAZ-B/S-0-M8x80 0905 212 101 12 80 80 0 13 50
W-HAZ-B/S-10-M8x90 0905 212 102 12 90 90 10 13 50
W-HAZ-B/S-30-M8x110 0905 212 103 12 110 110 30 13 50
W-HAZ-B/S-50-M8x130 0905 212 104 12 130 130 50 13 25
W-HAZ-B/S-100-M8x180 0905 212 105 12 180 180 100 13 25
W-HAZ-B/S-0-M10x96 0905 215 101 15 95 96 0 17 25
W-HAZ-B/S-15-M10x111 0905 215 102 15 110 111 15 17 25
W-HAZ-B/S-25-M10x121 0905 215 103 15 120 121 25 17 25
W-HAZ-B/S-45-M10x141 0905 215 104 15 140 141 45 17 25
W-HAZ-B/S-95-M10x191 0905 215 105 15 190 191 95 17 25
W-HAZ-B/S-0-M12x112 0905 218 101 18 105 112 0 19 20
W-HAZ-B/S-10-M12x122 0905 218 102 18 115 122 10 19 20
W-HAZ-B/S-20-M12x132 0905 218 103 18 125 132 20 19 20
W-HAZ-B/S-40-M12x152 0905 218 104 18 145 152 40 19 20
W-HAZ-B/S-70-M12x182 0905 218 105 18 175 182 70 19 20
W-HAZ-B/S-100-M12x212 0905 218 106 18 205 212 100 19 10
W-HAZ-B/S-0-M16x137 0905 224 101 24 130 137 0 24 10
W-HAZ-B/S-20-M16x157 0905 224 102 24 115 157 20 24 10
W-HAZ-B/S-50-M16x187 0905 224 103 24 180 187 50 24 10
W-HAZ-B/S-100-M16x237 0905 224 104 24 230 237 100 24 5
W-HAZ-B/S-0-M16Lx152 0905 224 111 24 145 152 0 24 10
W-HAZ-B/S-30-M16Lx182 0905 224 113 24 175 182 30 24 10
W-HAZ-B/S-50-M16Lx202 0905 224 115 24 195 202 50 24 10
W-HAZ-B/S-10-M20x181 0905 228 101 28 170 181 10 30 10
W-HAZ-B/S-30-M20x201 0905 228 102 28 190 201 30 30 10
W-HAZ-B/S-60-M20x231 0905 228 103 28 220 231 60 30 5
W-HAZ-B/S-100-M20x271 0905 228 104 28 260 271 100 30 5
17
W-HAZ/S
Article description Drill dia. Min. drill
Art. No. Anchor Fixture Wrench PU
hole depth
Length thick- Size
for through
ness
fastening
do h 2 l tfix SW
mm mm mm mm Qty.
18
W-HAZ/S
Min. drill Anchor Fixture Wrench
Article description Art. No. Drill dia. PU
hole depth Length thickness Size
for through
fastening
do h 2 l tfix SW
mm mm mm mm Qty.
19
W-HAZ/A4
HIGH-PERFORMANCE ANCHOR W-HAZ/A4
Approved for:
W-HAZ-B/A4 Concrete C20/25 to C50/60
Benefits:
• The bolt is attuned to the sleeve to make this anchor a
W-HAZ-S/A4 reliable specialist for highest shear load demands.
• Various head types allow tidy finishes and avoid risk
of injury when using for machine bases.
• The optimized combination of expansion sleeve and
cone bolt allow smallest spacing and thus small cost
efficient anchor plates.
W-HAZ-SK/A4
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, Outdoor
Material composition A4 stainless steel
Type of fastening Through-fastening
Suitable for Cracked concrete
Metal constructions, metal profiles, brackets, foot plates, supports, cable Non-cracked concrete
conduits, pipes, railings, machines, etc.
Installation:
20
W-HAZ/A4
Min. drill
Article description Art. No. Drill dia. Anchor Fixture Wrench PU
hole depth Size
Length thickness
for through
fastening
do h 2 l tfix SW
mm mm mm mm Qty.
W-HAZ-B/A4-10-M8x90 5932 612 102 12 90 90 10 13 50
W-HAZ-B/A4-30-M8x110 5932 612 103 12 110 110 30 13 50
W-HAZ-B/A4-15-M10x111 5932 615 102 15 110 111 15 17 25
W-HAZ-B/A4-25-M10x121 5932 615 103 15 120 121 25 17 25
W-HAZ-B/A4-20-M12x132 5932 618 103 18 125 132 20 19 20
21
W-VIZ/S and WIT-VM 100
Individual attachment:
Cracked and non-cracked concrete
Galvanised steel
Proof of performance
2. Benets
• Through-bolt and cotter-pin mounting
• Highest load-bearing capacity, low axial and edge clearance
• Shallow drilling hole depth with deep anchoring depth
• The drill holes can be produced by the hammer drilling process (M8 to M24)
and diamond drilling process (M10 to M24)
Produce drilled hole Check diameter of Clean drill hole (blow out Screw mixer onto Before use, press out Fill composite mortar Press in anchor rod Visual check of Comply with Mount component,
cleaning brushes 2 x, brush out mechanically cartridge approx. 10 cm cord. starting from base of up to drill hole base mortar lling hardening time of apply installation
2 x, blow out 2 x), with Do not use this initial drill hole while turning slightly quantity, setting composite mortar torque
M20 and larger, blow mortar! depth marking
out with compressed air
(compressed-air nozzle!)
22
W-VIZ/S and WIT-VM 100
Anchor characteristics
M8 M8 M10 M10 M12 M12 M12 M12 M12 M12
Anchor diameter [mm]
hef 40 hef 50 hef 60 hef 75 hef 70 hef 80 hef 95 hef 100 hef 110 hef 125
Minimum component thickness hmin ≥ [mm] 80 80 100 110/100 110
5) 110 130/125 130
5) 140 160
Minimal axis distance
smin ≥ [mm] 40 40 40 40 40 50 40 50 55 55 40 55 40 55 50 806) 50 806) 50 806)
cracked concrete non-cracked concrete
Minimal edge clearance
cmin ≥ [mm] 40 40 40 40 40 50 40 50 55 55 50 55 50 55 50 55 50 55 50 55
cracked concrete non-cracked concrete
Axial spacing scr,N [mm] 120 150 180 225 210 240 285 300 330 375
Edge spacing ccr,N [mm] 60 75 90 112.5 105 120 142.5 150 165 187.5
Effective anchoring depth hef ≥ [mm] 40 50 60 75 70 80 95 100 110 125
Nom. drill dia. d0 [mm] 10 10 12 12 14 14 14 14 14 14
Drill hole depth h0 ≥ [mm] 42 55 65 80 75 85 100 105 115 130
Through-hole in the component being connected
df ≤ [mm] 9 9 12 12 14 14 14 14 14 14
– cotter-pint mounting
Through-hole in the component being connected
df ≤ [mm] – – 14 14 16 16 16 16 16 16
– pass-through mounting7)
Installation torque Tinst = [Nm] 10 10 15 15 25 25 25 30 30 30
Cleaning brush dia. D ≥ [mm] 10.8 10.8 13.0 13.0 15.0 15.0 15.0 15.0 15.0 15.0
Performance data
M8 M8 M10 M10 M12 M12 M12 M12 M12 M12
Anchor diameter [mm]
hef 40 hef 50 hef 60 hef 75 hef 70 hef 80 hef 95 hef 100 hef 110 hef 125
50°C3) /
Tensile zone 4.3 6.1 8.0 11.1 10.0 12.3 15.9 17.1 19.8 24.0
80°C4)
(cracked concrete C20/252),
72°C3) /
Permissible central tensile
s ≥ 3 hef, c ≥ 1.5 hef) 2.4 3.6 5.7 5.7 7.6 9.5 9.5 14.3 14.3 14.3
120°C4)
without edge inuence
(cracked concrete C20/252), 8.0 8.0 12.0 12.0 19.4 19.4 19.4 19.4 19.4 19.4
transverse
load1)
(non-cracked concrete C20/252), 8.0 8.0 12.0 12.0 19.4 19.4 19.4 19.4 19.4 19.4
c ≥ 10 hef)
Permissible bending moment Tperm. [Nm] 17.1 17.1 34.3 34.3 60 60 60 60 60 60
F30 [kN] – 3.0 7.0 – – 10.0 – 10.0 – –
F60 [kN] – 0.3 0.95 – – 2.8 – 2.8 – –
Fire resistance class
F90 [in kN] – – 0.3 – – 1.35 – 1.35 – –
F120 [kN] – – – – – 0.8 – 0.8 – –
Würth system components 1) The partial safety factors of the resistances regulated in the 3) Maximum long-term temperature.
approval and a partial safety factor of the effects of γF = 1.4 4) Maximum short-term temperature.
have been taken into account. Please refer to the European 5) The back of the concrete component must be checked to ensure
Technical Approval Guidelines (ETAG), Appendix C, for that no chipping has occurred during drilling
information on combining tensile and transverse loads, edge (see ETA-04/0095).
inuence and groups of anchors. 6) Min. axis distance smin = 55 mm for edge clearance c ≥ 80 mm.
2) The concrete has normal reinforcement. Higher values are 7) The ring gap in the attached part must be completely lled with
possible for higher concrete strengths. excess mortar after the setting.
23
W-VIZ/S and WIT-VM 100
Anchor characteristics
M16 M16 M16 M16 M20 M20 M20 M24 M24
Anchor diameter [mm]
hef 90 hef 105 hef 125 hef 145 hef 115 hef 170 hef 190 hef 200 hef 225
Minimum component thickness hmin ≥ [mm] 130 150 170/160 5) 190/1805) 160 230/220 5) 250/2405) 270/260 5) 300/2905)
Minimal axis distance
smin ≥ [mm] 50 50 50 60 60 60 60 60 80 80 80 80 80 80 80 105 80 105
cracked concrete non-cracked concrete
Minimal edge clearance
cmin ≥ [mm] 50 50 50 60 60 60 60 60 80 80 80 80 80 80 80 105 80 105
cracked concrete non-cracked concrete
Axial spacing scr,N [mm] 270 315 375 435 345 510 570 600 675
Edge spacing ccr,N [mm] 135 157.5 187.5 217.5 172.5 255 285 300 337.5
Effective anchoring depth hef ≥ [mm] 90 105 125 145 115 170 190 200 225
Nom. drill dia. d0 [mm] 18 18 18 18 22 24 24 26 26
Drill hole depth h0 ≥ [mm] 98 113 133 153 120 180 200 215 240
Through-hole in the component being connected
df ≤ [mm] 18 18 18 18 22 24 24 26 26
– cotter-pint mounting
Through-hole in the component being connected
df ≤ [mm] 20 20 20 20 24 26 26 28 28
– pass-through mounting6)
Installation torque Tinst ≤ [Nm] 50 50 50 50 80 80 80 120 120
Cleaning brush dia. D ≥ [mm] 19 19 19 19 23 25 25 27 27
Performance data
M16 M16 M16 M16 M20 M20 M20 M24 M24
Anchor diameter [mm]
hef 90 hef 105 hef 125 hef 145 hef 115 hef 170 hef 190 hef 200 hef 225
50°C3) /
Tensile zone 14.6 18.4 24.0 29.9 21.1 38.0 44.9 48.5 57.9
80°C4)
(cracked concrete C20/252),
72°C3) /
Permissible central tensile
s ≥ 3 hef, c ≥ 1,5 hef) 9.5 14.3 23.8 23.8 14.3 28.6 28.6 35.7 35.7
120°C4)
without edge inuence
(cracked concrete C20/252), 29.3 36.0 36.0 36.0 35.7 76.0 85.1 97.0 101.7
without edge
C20/252)
inuence
Pressure zone
anchor
load1)
(non-cracked concrete C20/252), 36.0 36.0 36.0 36.0 35.7 85.1 85.1 101.7 101.7
c ≥ 10 hef)
Permissible bending moment Tperm. [Nm] 152.0 152.0 152.0 152.0 200.0 296.6 296.6 512.0 512.0
F30 [kN] – – 12.0 – – 17.0 – 24.5 –
F60 [kN] – – 6.4 – – 8.8 – 12.7 –
Fire resistance class
F90 [in kN] – – 4.4 – – 6.0 – 8.6 –
F120 [kN] – – 3.4 – – 4.5 – 6.5 –
Würth system components 1) The partial safety factors of the resistances regulated in the 3) Maximum long-term temperature.
approval and a partial safety factor of the effects of γF = 1.4 4) Maximum short-term temperature.
have been taken into account. Please refer to the European 5) The back of the concrete component must be checked to
Technical Approval Guidelines (ETAG), Appendix C, for ensure that no chipping has occurred during drilling
information on combining tensile and transverse loads, edge (see ETA-04/0095).
inuence and groups of anchors. 6) The ring gap in the attached part must be completely lled
2) The concrete has normal reinforcement. Higher values are with excess mortar after the setting.
possible for higher concrete strengths.
24
W-VIZ/S and WIT-VM 100
Designation Anchor Effective Attachment Total Drill bit Drill hole No. attachment Approval Art. No. P.
dia. anchoring height tfix length L nominal depth h0 ≥ points per cartridge ETA Qty.
depth hef [mm] [mm] dia. d0 [mm] Approx. qty.
[mm] [mm]
40 15 65 42 75 0905 440 811
15 80 0905 440 801
M8 10
50 30 95 55 62 0905 440 802
45 110 0905 440 803
10 85 0905 441 001
20 95 0905 441 002
60 30 105 65 42 0905 441 003
M10 12
60 135 0905 441 004
100 175 0905 441 005
75 20 110 80 36 0905 441 011
70 25 115 75 37 0905 441 211
10 110 0905 441 201
25 125 0905 441 202
50 150 0905 441 203
80 85 30
100 200 0905 441 204
10
125 225 0905 441 205
M12 165 265 14 0905 441 206
95 25 140 100 0905 441 221
25 145 0905 441 251
W-VIZ-A/S 28 ETA-04/0095
100 60 180 105 0905 441 252
100 220 0905 441 253*
110 25 155 115 0905 441 261*
27
125 25 170 130 0905 441 271
90 30 145 98 23 0905 441 611
105 30 160 113 20 0905 441 621
30 180 0905 441 601
M16 60 210 18 0905 441 602
125 133 18
100 250 0905 441 603
165 315 0905 441 604
145 30 200 153 16 0905 441 631
115 30 175 22 120 12 0905 442 011*
25 230 0905 442 001
M20 170 50 255 180 0905 442 002
24 8
100 305 0905 442 003
5
190 50 275 200 0905 442 021
50 290 0905 442 401
200 215 7
M24 100 340 26 0905 442 402*
225 50 315 240 6 0905 442 411*
25
W-VIZ/A4 and WIT-VM 100
Individual attachment:
Cracked and non-cracked concrete
Proof of performance
Produce drilled hole Check diameter of Clean drill hole (blow out Screw mixer onto Before use, press out Fill composite mortar Press in anchor rod Visual check of Comply with Mount component,
cleaning brushes 2 x, brush out mechanically cartridge approx. 10 cm cord. starting from base of up to drill hole base mortar lling hardening time of apply installation
2 x, blow out 2 x), with Do not use this initial drill hole while turning slightly quantity, setting composite mortar torque
M20 and larger, blow mortar! depth marking
out with compressed air
(compressed-air nozzle!)
26
W-VIZ/A4 and WIT-VM 100
s ≥ 3 hef, c ≥ 1.5 hef) 2.4 3.6 5.7 5.7 7.6 9.5 9.5 14.3 14.3 14.3
120°C4)
without edge inuence
(cracked concrete C20/252), 8.6 8.6 13.1 13.1 19.4 19.4 19.4 19.4 19.4 19.4
transverse
load1)
(non-cracked concrete C20/252), 8.6 8.6 13.1 13.1 19.4 19.4 19.4 19.4 19.4 19.4
c ≥ 10 hef)
Permissible bending moment Tperm. [Nm] 17.1 17.1 34.3 34.3 60 60 60 60 60 60
F30 [kN] – 3.0 7.0 – – 10.0 – 10.0 – –
F60 [kN] – 0.3 0.95 – – 2.8 – 2.8 – –
Fire resistance class
F90 [in kN] – – 0.3 – – 1.35 – 1.35 – –
F120 [kN] – – – – – 0.8 – 0.8 – –
Würth system components 1) The partial safety factors of the resistances regulated in the 3) Maximum long-term temperature.
approval and a partial safety factor of the effects of γF = 1.4 4) Maximum short-term temperature.
have been taken into account. Please refer to the European 5) The back of the concrete component must be checked to ensure
Technical Approval Guidelines (ETAG), Appendix C, for that no chipping has occurred during drilling
information on combining tensile and transverse loads, edge (see ETA-04/0095).
inuence and groups of anchors. 6) Min. axis distance s
min = 55 mm for edge clearance c ≥ 80 mm.
2) The concrete has normal reinforcement. Higher values are 7) The ring gap in the attached part must be completely lled with
possible for higher concrete strengths. excess mortar after the setting.
27
W-VIZ/A4 and WIT-VM 100
Anchor characteristics W-VIZ/A4 see ETA-04/0095
M16 M16 M16 M16 M20 M20 M20 M24 M24
Anchor diameter [mm] hef 90 hef 105 hef 125 hef 145 hef 115 hef 170 hef 190 hef 200 hef 225
Minimum component thickness hmin ≥ [mm] 130 150 170/1605) 190/1805) 160 230/2205) 250/2405) 270/2605) 300/2905)
Minimal axis distance
smin ≥ [mm] 50 50 50 60 60 60 60 60 80 80 80 80 80 80 80 105 80 105
cracked concrete non-cracked concrete
Minimal edge clearance
cmin ≥ [mm] 50 50 50 60 60 60 60 60 80 80 80 80 80 80 80 105 80 105
cracked concrete non-cracked concrete
Axial spacing scr,N [mm] 270 315 375 435 345 510 570 600 675
Edge spacing ccr,N [mm] 135 157.5 187.5 217.5 172.5 255 285 300 337.5
Effective anchoring depth hef ≥ [mm] 90 105 125 145 115 170 190 200 225
Nom. drill dia. d0 [mm] 18 18 18 18 22 24 24 26 26
Drill hole depth h0 ≥ [mm] 98 113 133 153 120 180 200 215 240
Through-hole in the component being connected
df ≤ [mm] 18 18 18 18 22 24 24 26 26
– cotter-pint mounting
Through-hole in the component being connected
df ≤ [mm] 20 20 20 20 24 26 26 28 28
– pass-through mounting6)
Installation torque Tinst ≤ [Nm] 50 50 50 50 80 80 80 120 120
Cleaning brush dia. D ≥ [mm] 19 19 19 19 23 25 25 27 27
s ≥ 3 hef, c ≥ 1,5 hef) 9.5 14.3 23.8 23.8 14.3 28.6 28.6 35.7 35.7
120°C4)
without edge inuence
Pressure zone Nperm. [kN] 50°C3) / 19.1 23.8 23.8 28.6 29.6 53.2 54.8 67.9 66.7
(non-cracked concrete C20/252)) 80°C4)
of a single anchor
=
Minimum axial and edge spacing C20/252) 72°C3) /
(scr,sp ≥ 3 hef, ccr,sp ≥ 1.5 hef) 11.9 16.7 23.8 23.8 19.1 35.7 35.7 45.2 45.2
120°C4)
Pressure zone
(non-cracked concrete C20/252)) 50°C3) /
20.5 25.8 33.5 35.7 29.6 53.2 62.9 67.9 81.0
load1)
(cracked concrete C20/252), 29.3 36.0 36.0 36.0 42.3 74.9 74.9 89.1 89.1
without edge
(non-cracked concrete C20/252), 36.0 36.0 36.0 36.0 43.9 74.9 74.9 89.1 89.1
load1)
c ≥ 10 hef)
Permissible bending moment Tperm. [Nm] 152.0 152.0 152.0 152.0 231.6 259.4 259.4 448.0 448.0
F30 [kN] – – 12.0 – – 17.0 – 24.5 –
F60 [kN] – – 6.4 – – 8.8 – 12.7 –
Fire resistance class
F90 [in kN] – – 4.4 – – 6.0 – 8.6 –
F120 [kN] – – 3.4 – – 4.5 – 6.5 –
Würth system components 1) The partial safety factors of the resistances regulated in the 3) Maximum long-term temperature.
approval and a partial safety factor of the effects of γF = 1.4 4) Maximum short-term temperature.
have been taken into account. Please refer to the European Tech- 5) The back of the concrete component must be checked to ensure
nical Approval Guidelines (ETAG), Appendix C, for information that no chipping has occurred during drilling (see ETA-
on combining tensile and transverse loads, edge inuence and 04/0095).
groups of anchors. 6) The ring gap in the attached part must be completely lled with
2) The concrete has normal reinforcement. Higher values are possi- excess mortar after the setting.
ble for higher concrete strengths.
28
W-VIZ/A4 and WIT-VM 100
Anchor bar dimensions: W-VIZ-A/A4, A4 stainless steel
Designa- Anchor Effective Attach- Total Drill bit Drill hole No. attach- Approval Art. No. P.
tion dia. anchoring ment length L nominal depth h0 ≥ ment points ETA Qty.
depth hef height [mm] dia. d0 [mm] per cartridge
[mm] tfix [mm] Approx. qty.
[mm]
40 15 65 42 75 0905 450 811
15 80 0905 450 801
M8 10
50 30 95 55 62 0905 450 802
45 110 0905 450 803
10 85 0905 451 001
20 95 0905 451 002
60 30 105 65 42 0905 451 003
M10 12
60 135 0905 451 004
100 175 0905 451 005
75 20 110 80 36 0905 451 011
70 25 115 75 37 0905 451 211
10 110 0905 451 201
25 125 0905 451 202
50 150 0905 451 203
80 85 30
100 200 0905 451 204
125 225 0905 451 205 10
165 265 0905 451 206
M12 95 25 140 14 100 0905 451 221
25 145 0905 451 251
60 180 28 0905 451 252
100 105
W-VIZ-A/A4 100 220 ETA-04/0095 0905 451 253*
29
WIT-VM 100 for W-VIZ/S, W-VIZ/A4
WIT-PM 100 Injection Mortar (temperature in anchoring base ≥ –5°C) 1 2
Accessories
Designation Appearance Art. No. P. Qty.
30
W-HD
Benefits:
• Quick and easy installation - no special tools needed
• Can be loaded immediately – no waiting time
• Maximum flexibility
• Fast and easy installation
Approved for:
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, Outdoor
Material composition Steel, galvanized
Type of fastening Pre fastening
Suitable for Hollow core concrete slabs
Suitable for fastening metal constructions, metal
profiles, brackets, foot plates, supports, cable
conduits, pipes, railings, machines, etc.
Characteristic Values:
Size M6 M8 M10 M12
Drill diameter d0 [mm] 10 12 16 18
Drill hole depth h0 [mm] 50 55 60 70
Anchor length hnom [mm] 40 45 53 58
Through-hole in
df ≤ [mm] 7 9 12 14
Anchor plate
Installation torque Tinst [Nm] 10 20 30 40
Anchor Dimensions:
Sleeve length l (mm) 30 35 40 45
Screw length min lS [mm] 42 + tfix 47 + tfix 55 + tfix 61 + tfix
Threaded bolt length min lB [mm] 47 + tfix 53 + tfix 63 + tfix 71 + tfix
Designation W-HD M6 W-HD M8 W-HD M10 W-HD M12
W-HD Art. No 0905 120 601 0905 120 801 0905 120 001 0905 121 201
(Galvanised Steel)
Packing Unit P. Qty. 50 50 50 25
Installation:
31
W-HD
Performance data
Size M6 M8 M10 M12
Web thickness du ≥ [mm] 25 30 40 50 25 30 40 50 25 30 40 50 25 30 40 50
Axial spacing scr≥ [mm] 300
Individual Anchors
Permissible load Fperm [kN] ≥ C45/55 0.7 0.9 2.0 2.9 0.7 0.9 2.0 3.6 0.9 1.2 3.0 3.6 1.0 1.2 3.0 4.3
oblique pull at every angle
Anchor pair
Permissible load Fperm [kN] ≥ C45/55 0.7 1.4 2.6 3.9 0.7 1.4 2.6 4.8 1.1 2.0 4.8 4.8 1.1 2.0 4.8 5.7
Tensile, transverse and oblique
32
W-FA/S, W-FA/F
FIXANCHOR W-FA/S, W-FA/F
W-FA/S Approved for:
Concrete C20/25 to C50/60
Benefits:
•With a few blows the anchor is easy and fast to
W-FA/F install.
•The long thread allows levelling of unevenness and
can be used to assemble stand-off fixations.
• Two approved anchorage depth broaden the
application spectrum.
• Its approval guarantees the safe function even
Machine Setting Tool under highest load requirements.
Art. No. 0904 908 016
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Through-fastening
Suitable for Non-cracked concrete
Metal structures, metal profiles, brackets, foot plates, supports,
cable conduits, piping, wooden structures, beams, purlins
Thread size M6 M6 M8 M8 M10 M10 M12 M12 M16 M16 M20 M20
Effective
hef [mm] 30 40 35 44 42 48 50 65 64 82 78 100
anchorage depth
Non-cracked concrete
Tensile C20/25 Nrec [kN] 2.9 4.1 5.0 5.7 6.5 7.6 8.5 12.6 12.3 17.9 16.6 24.0
C50/60 Nrec [kN] 4.1 4.1 7.3 7.3 10.1 11.8 13.2 16.7 19.1 27.7 25.7 37.3
Shear ≥ C20/25 Vrec [kN] 2.9 2.9 5.0 6.3 6.5 8.0 8.5 14.3 24.6 25.1 33.1 37.1
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Installation:
33
W-FA/S, W-FA/F
Min. drill
Article description Art. No. Drill dia. Anchor Fixture Thread Wrench PU
hole depth
Length thickness Size size
for through
fastening
do h2 l tfix/tfix,red ØxlG SW
mm mm mm mm mm Qty.
34
W-FA/S, W-FA/F
35
W-FA/A4, W-FA/HCR
FIXANCHOR W-FA/A4, W-FA/HCR Approved for:
Concrete C20/25 to C50/60
W-FA/A4
Benefits:
• With a few blows the anchor is easy and fast to
install.
• The long thread allows levelling of unevenness and
can be used to assemble stand-off fixations.
W-FA/HCR • Two approved anchorage depth broaden the
application spectrum.
• Its approval guarantees safe function even under
highest load requirements.
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, outdoor
Material composition Steel, galvanized
Type of fastening Through fastening
Non-cracked
Suitable for concrete
Cracked with
redundant fastening
Thread size M6 M6 M8 M8 M10 M10 M12 M12 M16 M16 M20 M20
Effective
hef [mm] 30 40 35 44 42 48 50 65 64 82 78 100
anchorage depth
Non-cracked concrete
Tensile C20/25 Nrec [kN] 2.9 3.6 4.3 5.7 5.7 7.6 8.5 11.9 12.3 17.2 16.6 24.0
C50/60 Nrec [kN] 4.4 4.8 6.6 8.6 8.9 11.8 13.2 18.5 19.1 26.7 25.7 37.3
Shear ≥ C20/25 Vrec [kN] 4.0 4.0 5.0 6.9 6.5 8.0 8.5 15.4 24.6 28.6 33.1 43.9
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Installation:
36
W-FA/A4, W-FA/HCR
Art. No. Drill dia. Min. drill Anchor Fixture Thread Wrench PU
Article description hole depth Length thickness Size size
for through
fastening
do h2 l tfix/tfix,red ØxlG SW
mm mm mm mm mm Qty.
37
W-ED/S
Approved for:
DROP-IN ANCHOR W-ED/S
Concrete C20/25 to C50/60
W-ED/S Benefits:
• Easy installation due to low drive-in energy
• Visual setting check and hand protection when
installing with markingspreading tool Can be loaded
immediately – no waiting time.
• Attachment can easily be demounted at any time.
W-ED/S-BND
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions Indoor, dry conditions
Material composition Steel, galvanized
Type of fastening Pre fastening
Suitable for Non-cracked concrete
Cracked with
redundant fastening
Attaching threaded rods, metal structures, metal profiles, grids, cable conduits,
pipelines, mounting rails
Installation:
38
W-ED/S
39
W-ED/A4
DROP-IN ANCHOR W-ED/A4, W-ED/HCR Approved for:
Concrete C20/25 to C50/60
Benefits:
• Easy installation due to low drive-in energy.
• Visual setting check and hand protection when
installing with markingspreading tool Can be loaded
immediately – no waiting time.
• Attachment can easily be demounted at any time.
Applications:
Technical Data:
Head configuration Inner thread
Environmental conditions
Indoor, outdoor
Material composition A4 stainless steel / HCR
highly corrosion-resistant steel
Type of fastening Pre fastening
Non-cracked
Suitable for concrete
Cracked with redundant
fastening
Range of loading:
Size M6 M8 M10 M12 M16 M20
hef [mm] 30 30 40 40 50 65 80
Non-cracked concrete
Nrec [kN] 3.3 3.3 3.6 6.1 8.5 12.6 17.2
Vrec [kN] 3.2 4.6 6.0 11.9 19.2 30.7
Installation:
40
W-ED/A4
Art. No. Min. Min.
Article description Drill dia. Min. Anchor PU
internal internal
drill hole Length thread thread
depth length length
do h2 l Lsd,min Lth
mm mm mm mm Qty.
W-ED/A4 M6 x 30 0904 030 06 8 30 30 7 13 100
W-ED/A4 M8 x 30 0904 030 08 10 30 30 9 13 100
W-ED/A4 M8 x 40 0904 030 081 10 40 40 9 20 100
W-ED/A4 M10 x 40 0904 030 10 12 40 40 11 15 50
W-ED/A4 M12 x 50 0904 030 12 15 50 50 13 18 50
W-ED/A4 M16 x 65 0904 030 16 20 65 65 18 23 25
W-ED/A4 M20 x 80 on demand 25 80 80 22 34 25
41
W-VP
Bonded anchor/ Capsule system W-VP Approved for:
Concrete C20/25 to C50/60
W-VP
Benefits:
• The pre-portioned resin volume guarantees
always safe adhesion and thus avoids
W-VD-A/S application errors.
• The short curing time allows to proceed
speedily.
• The included setting tool allows always smooth
installations.
W-VD-A/F • The usability can easily be checked and thus
avoids application errors.
• The capsule can be used as long the resin flows
like honey while shaking it.
W-VD-A/A4
Approvals and Certificates:
Applications:
Technical Data:
Head configuration Externally threaded
Environmental conditions Indoor, outdoor
Material composition Steel, galvanized / A4 stainless
steel / HCR highly corrosion-
resistant steel
Type
of fastening Pre fastening
Suitable for Non-cracked concrete
42
W-VP
Article description Article No. Drill Diameter Drill hole depth Fits*
d0 [mm] h0 [mm] PU
W-VP M8 5915 908 080 10 80 W-VD-A M8 10
W-VP M10 5915 910 080 12 90 W-VD-A M10 10
W-VP M12 5915 912 095 14 110 W-VD-A M12 10
W-VP M16 5915 916 095 18 125 W-VD-A M16 10
W-VP M20 5915 920 175 22 170 W-VD-A M20 10
W-VP M24 5915 924 210 26 210 W-VD-A M24 5
*Threaded rods see page 42
43
WIT-PE 500
Approved for:
Injection system WIT-PE 500 Concrete C20/25 to C50/60, cracked
Benefits:
• The prolonged gelling/working time allows
convenient adjustment at higher temperature
and with large embedment depth.
• Most approvals guarantee the optimized load
385 ml 585 ml 1400 ml capacities for threaded rods and rebar.
Art.no.: Art.no.: Art.no.: • It is specially developed chemical composition
0903 480 001 0903 480 003 0903 480 002 that allows reliable installation in underwater
conditions and when filled in diamond core drill
holes.
• The low shrinkage of the mortar broadens
the application spectrum in addition for big
∅8 - ∅40 diameter fastener elements.
M8 - M39
Technical Data:
Head configuration Extended threaded
Environmental conditions Indoor, outdoor
Material composition Steel, galvanized / A4
stainless steel
Type
of fastening Pre fastening
Cracked
Suitable for concrete
Suitable for fastening metal constructions, metal profiles, brackets, Non-cracked concrete
foot plates, supports, cable conduits, pipes, railings, machines, etc.
Temperature Gelling - working time Minimum Curing time Minimum Curing time
of Concrete in dry concrete in wet concrete
5°C to 9°C 60 min 72 h 142 h
10°C to 19°C 45 min 45 h 90 h
20°C to 29°C 30 min 10 h 20 h
30°C to 39°C 20 min 6 h 12 h
≥ 40°C 12 min 4 h 8h
Installation:
44
WIT-PE 500
Recommended loads
Thread size M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39
Effective anchorage depth hef,typ [mm] 80 90 110 125 170 210 240 270 300 330 360
Non-cracked concrete
Tensile C20/25 Nrec [kN] 8.7 13.8 20.1 28.0 38.1 52.3 63.9 76.2 89.3 103.0 117.3
C50/60 Nrec [kN] 8.7 13.8 20.1 30.8 41.9 57.5 70.3 83.8 98.2 113.3 129.1
Shear ≥ C20/25 Vrec [kN] 5.3 8.3 12.1 22.4 35.0 50.3 65.6 80.1 99.1 116.7 139.4
Cracked concrete
Tensile C20/25 Nrec [kN] 12.3 16.2 21.8 29.6 38.1 47.6
C50/60 Nrec [kN] 13.6 17.8 24.0 32.6 41.9 52.4
Shear ≥ C20/25 Vrec [kN] 12.1 22.4 35.0 50.3 65.6 80.1
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Anchor challenges
Thread size M8 M10 M12 M16 M20 M24 M27 M30 M33 M36 M39
hef,min [mm] 60 60 70 80 90 96 108 120 132 144 156
Effective anchorage depth
hef,max [mm] 96 120 144 192 240 288 324 360 396 432 468
Nominal drill hole diameter d0 [mm] 10 12 14 18 24 28 32 35 37 42 46
Drill depth h0 / h1 [mm] = hef
Clearance-hole in fixture
df [mm] 9 12 14 18 22 26 30 33 36 39 42
to be attached
Wrench size SW [mm] 13 17 19 24 30 36 41 46 50 55 60
Required torque Tinst [Nm] 10 20 40 80 120 160 180 200 350 500 700
Min. thickness of
hmin [mm] = hef + 30mm ≥ 100mm = hef + 2d0
concrete member
Minimum spacing smin [mm] 40 50 60 80 100 120 135 150 165 180 195
Minimum edge distances cmin [mm] 40 50 60 80 100 120 135 150 165 180 195
df
Dispensing Gun
d0
45
WIT-PE 500
Recommended loads
Rebar size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32 Ø40
Effective anchorage depth hef,typ [mm] 80 90 110 125 125 170 210 270 300 360
Non-cracked concrete
Tensile C20/25 Nrec [kN] 11.2 15.7 21.4 28.0 28.0 38.1 52.3 76.2 89.3 117.3
C50/60 Nrec [kN] 12.3 17.3 23.5 30.8 30.8 41.9 57.5 83.8 98.2 129.1
Shear ≥ C20/25 Vrec [kN] 6.6 10.3 14.8 20.2 26.3 41.1 64.3 80.6 105.3 164.6
Cracked concrete
Tensile C20/25 Nrec [kN] 12.3 15.3 16.2 21.8 29.6 42.8 56.4
C50/60 Nrec [kN] 13.6 16.8 17.8 24.0 32.6 47.1 62.1
Shear ≥ C20/25 Vrec [kN] 14.8 20.2 26.3 41.1 64.3 80.6 105.3
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Anchor challenges
Rebar size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32 Ø40
hmin
h0
hef
d0
46
WIT-VM 250
Injection system WIT-VM 250 Approved for:
Concrete C20 / 25 to C50/60, cracked
Benefits:
• Styrene-free, quick-curing high-performance
vinylester mortar allows the anchorage to be
finished in a short period of time.
• Most approvals guarantees optimized load
capacities for threaded rods and rebar.
• Universal fixing system for a broad range of
420 ml applications on building sites.
Art. No. : 0903 450 205 • The special chemical composition allows
working in high corrosion areas.
∅8 - ∅32
M8 - M30
Applications:
Technical Data:
Head configuration Extended threaded
Environmental conditions Indoor, outdoor
Material composition Steel, galvanized / A4
stainless steel
Type
of fastening Pre fastening
Cracked
Suitable for concrete
Non-cracked concrete
Securing wooden structures, metal structures, metal profiles,
brackets, screens, plumbing objects,, cable conduits
Temperature Gelling - working time Minimum Curing time Minimum Curing time
of Concrete in dry concrete in wet concrete
-10°C bis -4°C1) 90 min 24 h 48 h
-5°C bis -1°C 90 min 14 h 28 h
0°C bis 4°C 45 min 7h 14 h
5°C bis 10°C 25 min 2h 4h
10°C bis 19°C 15 min 80 min 160 min
20°C bis 29°C 6 min 45 min 90 min
30°C bis 34°C 4 min 25 min 50 min
35°C bis 39°C 4 min 20 min 40 min
≥ 40°C 1.5 min 15 min 30 min
1)
Cartridge temperature must be at min. 15°C
Installation:
47
WIT-VM 250
Recommended loads
Thread size M8 M10 M12 M16 M20 M24 M27 M30
Effective anchorage depth hef,typ [mm] 80 90 110 125 170 210 240 270
Non-cracked concrete
Tensile C20/25 Nrec [kN] 8.7 13.5 19.7 28.0 44.4 61.0 74.5 88.9
C50/60 Nrec [kN] 8.7 13.8 20.1 30.8 48.9 67.1 82.0 97.8
Shear ≥ C20/25 Vrec [kN] 5.3 8.3 12.1 22.4 35.0 50.3 65.6 80.1
Cracked concrete
Tensile C20/25 Nrec [kN] 9.1 13.7 23.3 34.6 52.5 63.5
C50/60 Nrec [kN] 10.0 15.1 25.6 38.0 57.8 69.9
Shear ≥ C20/25 Vrec [kN] 12.1 22.4 35.0 50.3 65.6 80.1
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Anchor characteristics
Thread size M8 M10 M12 M16 M20 M24 M27 M30
hef,min [mm] 60 60 70 80 90 96 108 120
Effective anchorage depth
hef,max [mm] 160 200 240 320 400 480 540 600
Nominal drill hole diameter d0 [mm] 10 12 14 18 24 28 32 35
Drill depth h0 / h1 [mm] = hef
Diameter of steel brush db ≥ [mm] 12 14 16 20 26 30 34 37
Clearance-hole in fixture
df [mm] 9 12 14 18 22 26 30 33
to be attached
Wrench size SW [mm] 13 17 19 24 30 36 41 46
Required torque Tinst [Nm] 10 20 40 80 120 160 180 200
Min. thickness of concrete member hmin [mm] = hef +30mm ≥ 100mm = hef + 2d0
Minimum spacing smin [mm] 40 50 60 80 100 120 135 150
Minimum edge distances cmin [mm] 40 50 60 80 100 120 135 150
Dispensing Gun
Art. No. : 1891 003003
48
WIT-VM 250
Recommended loads
Rebar size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32
Effective anchorage depth hef,typ [mm] 80 90 110 125 125 170 210 270 300
Non-cracked concrete
Tensile C20/25 Nrec [kN] 9.6 13.5 19.7 28.0 28.0 44.4 61.0 88.9 101.7
C50/60 Nrec [kN] 10.5 14.8 21.7 30.8 30.8 48.9 67.1 97.8 111.9
Shear ≥ C20/25 Vrec [kN] 6.6 10.3 14.8 20.2 26.3 41.1 64.3 80.6 80.6
Cracked concrete
Tensile C20/25 Nrec [kN] 9.1 13.7 17.1 28.0 38.9 63.5 74.4
C50/60 Nrec [kN] 10.0 15.1 18.9 30.8 42.8 69.9 81.8
Shear ≥ C20/25 Vrec [kN] 14.8 20.2 26.3 41.1 64.3 80.6 80.6
1)
Material safety factor yM and safety factor for action y L = 1.4 are included. The material safety factor depends on the failure mode.
Anchor characteristics
Rebar size Ø8 Ø10 Ø12 Ø14 Ø16 Ø20 Ø25 Ø28 Ø32
hef,min [mm] 60 60 70 75 80 90 100 112 128
Effective anchorage depth
hef,max [mm] 160 200 240 280 320 400 480 540 640
Nominal drill hole diameter d0 [mm] 12 14 16 18 20 24 32 35 40
Drill depth h0 / h1 [mm] = hef
Diameter of steel brush db ≥ [mm] 14 16 18 20 22 26 34 37 41.5
= hef +30mm
Min. thickness of concrete member hmin [mm] = hef + 2d0
≥ 100mm
Minimum spacing smin [mm] 40 50 60 70 80 100 125 140 160
Minimum edge distances cmin [mm] 40 50 60 70 80 100 125 140 160
hmin
h0
hef
d0
49
Cleaning accessories
Cleaning accessories
For diameter Length Nom. drill dia. Cleaning Extension Machine Blow-Out P. Qty.
[mm] d0 [mm] Brush Art. No. Mounting Pump
Art. No. Art. No. Art. No.
M8 170 10 1903 489 000
M10, Ø8 170 12 1903 489 001
M12, Ø10 200 14 1903 489 002
Ø12 200 16 1903 489 003
M16, Ø14 300 18 1903 489 004
Ø16 300 20 1903 489 005 1903 489 111 Hexagon: 0903 990 001 1
0905 499 101
M20, Ø20 300 24 1903 489 006
M24 300 28 1903 489 007 SDS plus:
M27, Ø25 300 32 1903 489 008 1903 489 101
M30, Ø28 300 35 1903 489 009
Ø32 300 40 1903 489 010
Ø40 300 50 1903 489 011
Art. no. 1903 489 00* Art. No. 0903 990 001
1903 489 111
50
THREADED RODS
W-VD-A/S
W-VD-A/A4
Article Description Art. No. Art. No. Anchor Drill Min. drill Fixture Thread Wrench PU
Lenght dia. hole thickness Size Size
depth
Zinc plated Stainless steel l d0 h0 tfix M SW
Steel grade (5.8) Steel grade (A4-70) mm mm mm mm Qty.
W-VD-A M8-20/110 5915 108 110 5915 208 110 110 20
W-VD-A M8-60/150 5915 108 150 5915 208 150 150 10 80 60 M8 13
M8 x 1000 5916 008 999 5916 108 999 1000 -
W-VD-A M10-15/115 5915 110 115 5915 210 115 115 15
W-VD-A M10-30/130 5915 110 130 5915 210 130 130 30
W-VD-A M10-65/165 5915 110 165 5915 210 165 165 12 90 65 M10 17
W-VD-A M10-90/190 5915 110 190 5915 210 190 190 90
M10 x 1000 5916 010 999 5916 110 999 1000 -
W-VD-A M12-10/135 5915 112 135 5915 212 135 135 10
W-VD-A M12-35/160 5915 112 160 5915 212 160 160 35
W-VD-A M12-85/210 5915 112 210 5915 212 210 210 14 110 85 M12 19 10
W-VD-A M12-125/250 5915 112 250 5915 212 250 250 125
W-VD-A M12-175/300 5915 112 300 5915 212 300 300 175
M12 x 1000 5916 012 999 5916 112 999 1000 -
W-VD-A M16-20/165 5915 116 165 5915 216 165 155 20
W-VD-A M16-45/190 5915 116 190 5915 216 190 190 45
W-VD-A M16-85/230 5915 116 230 5915 216 230 230 18 125 85 M16 24
W-VD-A M16-105/250 5915 116 250 5915 216 250 250 105
W-VD-A M16-155/300 5915 116 300 5915 216 300 300 155
M16 x 1000 5916 016 999 5916 116 999 1000 -
W-VD-A M20-20/220 5915 120 220 5915 220 220 220 20
W-VD-A M20-60/260 5915 120 260 5915 220 260 260 22/24 170 60 M20 30
W-VD-A M20-100/300 5915 120 300 5915 220 300 300 100
M20 x 1000 5916 020 999 5916 120 999 1000 -
W-VD-A M24-15/260 5915 124 260 5915 224 260 260 15
W-VD-A M24-55/300 5915 124 300 5915 224 300 300 26/28 210 55 M24 36 5
M24 x 1000 5916 024 999 5916 124 999 1000 -
51
W-FRA 10
FRAME FIXING W-FRA 10
Benefits:
•Can be loaded immediately – no waiting time
•Very strong twist lock
W-FRA H 10 with hexagon screw and pressed-on washer •Universal frame-fixing anchor (concrete, masonry of
perforated and solid brick, aerated concrete)
•The anchor sleeve and special screw are
pre-assembled. Reduces installation efforts.
Technical Data:
Hexagon, Countersunk
Head configuration
and Pan Head
Environmental conditions Indoor, Outdoor
Steel, galvanized / A4
Material composition
stainless steel
Through fastening
Type of fastening
Suitable for Multiple attachment of
non-structural systems in
concrete and masonry
52
W-FRA 10
53
W-FRA 10
Fixture
Article Description Art. No. Art. No. Anchor
thickness for
Drive Wrench Drill Drill PU
length Size hole dia. hole depth
hnom=70mm
Zinc plated Stainless steel l tfix SW d0
A4 mm mm mm mm Qty.
0912 910 401 0912 910 501 80 10
Frame fixing W-FRA 10 0912 910 402 0912 910 502 100
with countersunk screw
30
0912 910 403 0912 910 503 120 50
0912 910 404 0912 910 504 140 70
0912 910 405 - 160 90
TX© 40 10 80 50
0912 910 406 - 180 110
0912 910 407 - 200 130
0912 910 408 - 230 160
0912 910 409 - 260 190
0912 910 410 - 300 230
54
W-UR 8
PLASTIC FRAME-FIXING ANCHOR W-UR 8
PLASTIC FRAME-FIXING ANCHOR W-UR8 Multiple attachment of non
42.1 load-bearing systems: Con-
crete, solid and perforated bricks
W-UR 8 with countersunk screw
and aerated concrete
Benefits:
W-UR 8 with countersunk screw
Galvanized steel
W-UR F 8 with hexagon screw +
Stainless steel A4
• Can be loaded immediately – no waiting time
pressed-on
W-UR F 8 washer • Expanding in four directions - High loads
with hexagon screw + pressed-on washer
Galvanized steel
• Universal frame-fixing anchor (concrete, masonry of
W-UR F 8A4 with panhead screw
Stainless steel perforated and solid brick, aerated concrete)
W-UR F 8 with panhead screw
Galvanized steel
• The anchor sleeve and special screw are
Stainless steel A4 pre-assembled. Reduces installation efforts.
W-UR F 8connecting
W-UR F 8 with with thread
connecting
M6 + M8 thread
M6 + M8
Galvanized steel
Stainless steel A4
Evidence of Performance
Drill hole Clean drilled
hole
Set anchor and
screw
Screw in screw Screw in screw
until ush
Drill hole Clean drilled
hole
Set anchor and
screw
Screw in screw Screw in screw
until ush
Suitable for Non-cracked concrete
55
W-UR 8
56
W-UR 10
PLASTIC FRAME-FIXING ANCHOR W-UR 10
42.2
PLASTIC FRAME-FIXING ANCHOR W- 10
Multiple fastenings of non-load-
W-UR 10 with countersunk screw bearing systems:
Concrete, solid and perforated brick and
Benefits:
aerated concrete
•Can be loaded immediately – no waiting time
•Very
W-UR strong
10 with twist lock
countersunk screw
Drill hole Clean drill hole Set anchor and Screw in the Screw in screw Drill hole Clean drill hole Set anchor and Screw in the Screw in screw
screw screw until ush screw screw until ush
57
W-UR 10
Fixture
Article Description Art. No. Art. No. Anchor
thickness for
Drive Wrench PU
length Size
hnom=70mm
Zinc plated Stainless steel l tfix SW
A4 mm mm Qty.
0912 810 401 0912 810 501 80 10
Frame fixing W-UR 10 0912 810 402 0912 810 502 100
with countersunk screw
30
0912 810 403 0912 810 503 115 45
0912 810 404 0912 810 504 135 65
0912 810 405 0912 810 505 160 90 13
AW© 40 50
0912 810 406 0912 810 506 185 115
0912 810 407 0912 810 507 200 130
0912 810 408 - 230 160
0912 810 409 - 260 190
0912 810 410 - 290 220
0912 810 411 - 320 250
0912 810 601 0912 810 701 80 10
0912 810 602 0912 810 702 100 30
Frame fixing W-UR F 10
with hexagon screw + 0912 810 603 0912 810 703 115 45
pressed-on washer 135 AW© 40 13 40
0912 810 604 0912 810 704 65
(only zinc version)
0912 810 605 0912 810 705 160 90
0912 810 606 - 185 115
0912 810 607 - 200 130
0912 810 608 - 230 160
58
W-ZX ®
ZEBRA SHARK W-ZX® Benefits:
• Ensures knotting in all hollow spaces and spreading
in all solid materials.
• Patented anchor head causes knotting of the
anchor shaft when the screw is screwed-in.
• Low screw-in torque and high fixed torque
• The drive-in lock prevents early spreading during
through fastening.
Setting Tool • Fold-down dowel collar translates to suitability for
Art. No. : 0906 100 001 pre fastening and through fastening.
• The twist lock prevents turning in the drill hole.
• The ZEBRA Shark W-ZXR is suitable for all screw
types.
Applications:
Securing coat rails, curtain rails, Technical Data:
wall shelves, light hanging cup- Head configuration All
boards, picture frames, mirrors, Environmental conditions Indoor, Outdoor
Material composition Plastic
lamps, cable ducts, cable clamps,
Type of fastening Pre fastening
electrical switches, wash basins,
Suitable for concrete, solid brick, solid
hand towel rails, signs, motion de-
sand-lime brick, vertically
tectors, hanging baskets. perforated brick, perforated
sand-lime brick, aerated
concrete, gypsum
plasterboard, gypsum
fibrous panels
Fixing characteristics
Article description W-ZX 5 × 28 W-ZX 6 × 35 W-ZX 8 × 46 W-ZX 10 × 56 W-ZX 12 × 66 W-ZX 14 × 76
Art.No. 0906 205 28 0906 206 35 0906 208 46 0906 210 56 0906 212 66 0906 214 76
Drill dia. d0 mm. 5 6 8 10 12 14
Drill hole depth h1 ≥ mm. 40 50 60 75 80 90
Length fixing l mm. 28 35 46 56 66 76
Screw dia. ds mm. 3-4 4-5 4,5-6 6-8 8-10 10-12
Package Unit PU Qty. 200 200 200 100 50
Load characteristics
Concrete C20/C25 Frec kN 0.4 0.8 1.0 1.6 2.2 2.5
Solid bricks Mz12, KS12 Frec kN 0.3 0.5 0.7 1.4 1.7 1.7
Aerated concrete PB2, PP2 Frec kN 0.05 0.1 0.1 0.15 0.2 0.35
Screw length = Length fixing + screw dia. + fixture thickness (+plaster/insulation thickness)
Installation:
59
W-GB
AIRCRETE ANCHOR W-GB
Suitable for:
AAC, ACC, ALC
Benefits:
•W-GB is in particular developed for AAC, ACC and
ALC to provide highest load capacity.
•Fast installation
Applications:
Facade and roof constructions made Technical Data:
of wood and metal, windows, doors, Head configuration All
brackets, cable ducts, switches, Environmental conditions Indoor, outdoor
Material composition Plastic
lights, fuse boxes, cable clips, pipe Type of fastening Pre fastening
clamps, toilet and washbasin attach- Suitable for Aerated concrete PB2
ments, hanging cabinets, strips, rail-
ings
Fixing characteristics
Article description GB 10 x 55 GB 12 x 60 GB 14 x 75
Art.No. 0903 50 10 0903 50 12 0903 50 14
Drill dia. d0 mm. 10 12 14
Drill hole depth h1 ≥ mm. 65 70 85
Length fixing l mm. 55 60 75
Screw dia. ds mm. 4.5 - 6 7-8 10
Package Unit PU Qty. 25 25
25
Load characteristics
AAC 2 N/mm2 Frec kN 0.3 0.3 0.5
AAC 4 N/mm2 Frec kN 0.6 0.5 1.15
AAC 6 N/mm2 Frec kN - 0.8 -
Installation:
60
W-GS
W-GS GYPSUM
Gypsum PLASTERBOARD
Plasterboard ANCHORS
Fixing W-GS 73
Type Z
Benefits:
W-GS/Z diecast zinc
Diecast zinc • Less space required behind the board
(only 15 mm)
Type Z/L • For use without a setting tool with a
Diecast zinc, long battery-powered screwdriver and appropriate bit
W-GS/ZL diecast zinc large for the respective screw.
Type K • The new centering tip enables easy starting and
Plastic drilling into the board.
• Inexpensive, fast installation without pre-drilling.
W-GS/K plastic Product Range Case • Fast installation with a battery-powered
screwdriver.
Performance facts
Applications:
1. Applications Product Range Case
• For secondary attachments in gypsum plasterboards/brous panels Range of W-GS Gypsum Plasterboard Technical Data:
and light building boards Anchors
• For the attachment of components in conjunction with a wood or
Contents: Head configuration All
Anchors: 100 pcs. 14.5 x 33 mm plastic,
particle board screw (no drill tip, counter thread, ring thread) 100 pcs. 14.5 x 33 mm diecast zinc Environmental conditions Indoor, dry conditions
Screws: 200 pcs. 4.5 x 35 mm
• Can be used outside or in rooms subject to moisture in conjunction with + 1 pc. ZEBRA® Screwdriver Material composition diecast zinc /plastic
a stainless-steel screw Art. No. 0613 253 2 = 401 parts.
Art. No. 0964 903 250 Type of fastening Pre fastening
• We recommend using type Z/L for double-planked boards
• Recommended universal bit mount:
Suitable for Gypsum plasterboard
Bit MountFor
withattachments
quick-action chuckin– Art.
gypsum plasterboards/fibrous
No. 0614 176 711 •panels
The gypsum and light boards;
plasterboard anchor and the screw can be inserted with
Universal Mount – Art. No. 0614 176 708 the same bit
for use with wood and chipboard screw.
• The new centering tip enables easy starting and drilling into the board
2. Advantages • Inexpensive, fast installation without pre-drilling
• The patented drive enables setting of an anchor with a PZ bit, AW • Fast installation with a battery-powered screwdriver
bit or Torx bit, as the power transmission takes place via the hexagon • The component can be secured with wood or particle board screws
(Detail 1) (type Z + type Z/L = screw dia. of 4.5 mm/type K = screw dia. of 4.5 –
• The patented twist lock is triggered by screwing in a screw. When 5 mm)
unscrewing the screw, the gypsum plasterboard plug does not turn
back and remains in the anchoring base (Detail 2) 3. Properties
• Less space required behind the board (only 15 mm) • High plastic or diecast zinc quality
Fixing
• For use without a settingcharacteristics
tool with a battery-powered screwdriver and • Temperature-neutral from -40°C to +80°C
appropriate bit for the respective screw • Form-
W-GS ttingType
fastening
Z W-GS Type Z/L W-GS Type K
Article description
Art.No. 0903 2521 0903 2521 0903 2511
Setting instructions
Through - hole in fixture df≤ mm 6.5 6.5 6.5
Minimum bore thickness d≥ mm 9 9 9
Length fixing l mm 33 39 33
Screw dia. ds mm 4.5 4.5 4.5 - 5
Press anchor tips Screw in anchor Fit the component Detail 1: Detail 2:
into attachment
Package until
Unit flush
PUThe patented drive enables setting with
PZ bit, AW bitQty. 200
Patented twist lock
200
surface or Torx bit
200
Load characteristics
Gypsum plasterboard - 12.5 mm Nrec kN 0.1 0.1 0.1
Tension Gypsum plasterboard - 25 mm Nrec kN 0.1 0.12 0.1
Gypsum fibrous panels Nrec kN 0.12 0.12 -
Gypsum plasterboard - 12.5 mm Vrec kN 0.12 0.12 0.12
Shear Gypsum plasterboard - 25 mm Vrec kN 0.15 0.15 0.12
Gypsum fibrous panels Vrec kN 0.15 0.15 -
Installation:
61
YOUR RIGHT PARTNER
Please feel free to contact us using the details below - we would be more than happy to visit and demonstrate our
way of working, products we supply and service we provide.
Your friendly Würth Gulf Sales Consultant will visit when required by you, the customer at your convenience.
318th Almedan Road, Sharjah, U.A.E. Abu Dhabi, U.A.E. Fujairah, U.A.E
Industrial Area 4, Al Quoz, Tel : +971 6 5391919 Tel : +971 2 5544155 Email : fujpickshop1@wurthgulf.ae
Dubai, U.A.E. Fax : +971 6 5391917 Fax : +971 2 5544199
Email : dxbpickshop1@wurthgulf.ae Email : shjpickshop1@wurthgulf.ae Email : adpickshop1@wurthgulf.ae
BUSINESS PARTNERS
Oman KSA
Email: info@wurthgulf-oman.com Email: info@wurthgulf-ksa.com