Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
xls" Program
Version 2.9
Datos de Entrada:
1 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
p = qh*G*Cp - qi*(+/-GCpi) para paredes a sotavento,laterales, y cubierta (N/m2), donde: qi = qh (Secc. 5.12.2.1)
2 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
Notas: 1. Los signos (+) y (-) significan presiones hacia y saliendo de la superficie respectivamente.
2. Por prescripción reglamentaria 1.4.1, la carga mínima de viento sobre SPRFV es 0,50kN/m2.
3. Cubierta zona #1 es una zona de 0 a h/2 desde el borde a barlovento.
4. Cubierta zona #2 es una zona h/2 a h desde el borde a barlovento.
5. Cubierta zona #3 es una zona de h a 2*h desde el borde a barlovento.
6. Cubierta zona #4 es una zona > 2*h desde el borde a barlovento.
3 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
4 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
Is Building Flexible? No
Parameters Used in Both Item #2 and Item #3 Calculations (from Table 6-4):
a^ = 0.105
b^ = 1.00
a(bar) = 0.154
b(bar) = 0.65
c= 0.20
l= 500
e(bar) = 0.200
z(min) = 15
5 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
6 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
Wind Pressure Combinations for Full and Partial Loading of MWFRS for Buildings with h > 60 ft.
Case 1: Full design wind pressures acting on the projected area perpendicular to each principal axis of
the building considered separately.
Case 2: Wind pressure as defined in Case 1, but with a 25% reduction in pressure acting on 50% of the
projected area bounded by the extreme projected edge of the building.
Case 3: Wind pressure as defined in Case 1, but considered to act simultaneously at 75% of the
specified value.
Case 4: Wind pressure as defined in Case 3, but with a 25% reduction of these pressures acting on 50%
of the projected area bounded by the extreme projected edge of the building.
Notes: 1. Design wind pressures for windward (Pw) and leeward (PL) faces are obtained from provisions
for buildings with a mean roof height, h > 60 ft. (per Sect. 6.5.12).
2. Above diagrams show plan view of building.
3. Pw = Windward face design pressure , PL = Leeward face design pressure.
7 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
8 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
5, Secc. 5.12.2.1)
9 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
10 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
RFV es 0,50kN/m2.
11 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
12 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
f >=1 Hz.
ft.
ft.
Damping Ratio
Period Coefficient
= Ct*h^(3/4) , sec. (Period)
= 1/T , Hz. (Natural Frequency)
= V(mph)*(88/60) , ft./sec.
= b(bar)*(z(bar)/33)^(a(bar))*V*(88/60) , ft./sec. , Eq. 6-12
= f*Lz(bar)/(V(bar,zbar)) , Eq. 6-10
= 7.47*N1/(1+10.3*N1)^(5/3) , Eq. 6-9
= 4.6*f*h/(V(bar,zbar))
= (1/hh)-1/(2*hh^2)*(1-e^(-2*hh)) for hh > 0, or = 1 for hh = 0 ,Eq. 6-11
= 4.6*f*B/(V(bar,zbar))
= (1/hB)-1/(2*hB^2)*(1-e^(-2*hB)) for hB > 0, or = 1 for hB = 0,Eq. 6-11
= 15.4*f*L/(V(bar,zbar))
= (1/hL)-1/(2*hL^2)*(1-e^(-2*hL)) for hL > 0, or = 1 for hL = 0 ,Eq. 6-11
= ((1/b)*Rn*Rh*RB*(0.53+0.47*RL))^(1/2) , Eq. 6-8
= 0.925*(1+1.7*Iz(bar)*(gq^2*Q^2+gr^2*R^2)^(1/2))/(1+1.7*gv*Iz(bar)) ,
Eq. 6-6
13 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
14 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
ch principal axis of
15 of 16 04/04/2018 18:48:56
"ASCE798W.xls" Program
Version 2.9
16 of 16 04/04/2018 18:48:56