Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Use this to displays your Samsung handset's IMEI NumberIMEI (International Mobile Equipment
Identity) is a unique 15-digit number assigned to all cellular devices. We can use this number to
block a mobile phone from being used by another person or phone company if it has been lost
or stolen.. The same code works from all other GSM handsets.
Type *#06#
Type *#0*#
Type *#9999#
Type *#0837#
Type *#0001#
LCD Contrast.
Type *#0523#
Type *#9998*228#
Program status.
Type *#9998*246#
Type *#9998*289#
Debug Screens.
Type *#9998*324#
Watchdog.
Type *#9998*364#
Type *#9998*377#
Trace Watchdog.
Type *#9998*427#
Type *#9998*523#
Jig detect.
Type *#9998*544#
Memory status.
Type *#9998*636#
Type *#9998*746#
Type *#9998*778#
RTK (Run Time Kernel)The kernel is the central module of an operating system (OS). It is the part
of the operating system that loads first, and it remains in main memory. Because it stays in
memory, it is important for the kernel to be as small as possible while still providing all the
essential services required by other parts of the operating system and applications. The the
kernel code is usually loaded into a protected area of memory to prevent it from being
overwritten by programs or other parts of the operating system. errors - if ok then phone is
reset.
Type *#9998*785#
Type *#9998*786#
Software Version.
Type *#9998*837#
Test Vibrator - Flash the screen light during 10 sec and vibration activated.
Type *#9998*842#
Type *#9998*862#
Diag.
Type *#9998*872#
Type *#9998*947#
Last/Chk.
Type *#9998*999#
Type *#9998*9266#
Software version.
Type *#9998*9999#
Changes serial parameters (s=?, f=0.1, t=0.1).
Type *0001*s*f*t#
*#06# - IMEI number The IMEI or MEID number for your mobile phone Samsung Star 3 GT-S5220
acts as a unique identifier for that device. No two devices will have the same IMEI or MEID,
which makes it a very useful tool for tracking lost or stolen cell phones. You can quickly retrieve
and record your phone's IMEI or MEID number in a variety of different ways, depending on your
device.
*#*#4636#*#*
This code can be used to get some interesting information about Samsung Star 3 GT-S5220 and
battery. It shows following 4 menus on screen:
* Phone information
* Battery information
* Battery history
* Usage statistics
*#*#7780#*#*
This code can be used for a factory data reset. It'll remove following things:
* Downloaded applications
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone"
button. So you get a chance to cancel your operation.
*2767*3855# - Think before you give this code. This code is used for factory format. It'll remove
all files and settings including the internal memory storage. It'll also reinstall the phone
firmware.
PS: Once you give this code, there is no way to cancel the operation unless you remove the
battery from the phone. So think twice before giving this code.
*#*#34971539#*#* - This code is used to get information about phone camera. It shows
following 4 menus:
WARNING: Never use the first option otherwise your phone camera will stop working and you'll
need to take Samsung Star 3 GT-S5220 to service center to reinstall camera firmware.
*#*#7594#*#*
This one is favorite one. This code can be used to change the "End Call / Power" button action in
your phone. Be default, if you long press the button, it shows a screen asking you to select any
option from Silent mode, Airplane mode and Power off.
You can change this action using this code. You can enable direct power off on this button so you
don't need to waste your time in selecting the option.
*#*#426#*#* - Debug information for Google Play service.With Google Play services, your
Android app can take advantage of the latest, Google-powered features such as Maps, Google+,
and more, with automatic platform updates distributed as an APK through the Google Play store.
*#301279# - HSDPAHSDPA means “High Speed Downlink Packet Access” and is a technique used
in the UMTS mobile communication system, the download speeds of currently 3.6 Mbit/s to 7.2
Mbit/s. HSUPA is developed commercially since 2007 in Germany. High Speed Downlink Packet
Access (HSDPA, 3.5G, 3G + or UMTS broadband) is a data transmission method of the cellular
standards UMTS, which was defined by the 3rd Generation Partnership Project. The method
enables DSL-like data rates in mobile networks. HSDPA is available in Germany, among others by
the network operators Vodafone, E-Plus, O2, and telecom and in Switzerland by Swisscom,
Sunrise and Orange. In Austria operate the A1, T-Mobile, Orange and Three HSDPA
networks./HSUPAHSUPA means “High Speed Uplink Packet Access” and is a technique used in
the UMTS mobile communication system, the upload speeds up to 5.8 Mbit/s. High Speed Uplink
Packet Access (HSUPA) is a transmission method of the UMTS mobile radio standard that allows
higher data rates in the uplink and reduces the round trip time (often referred to as ping). HSUPA
Category 6 were up to 5.76 Mbit / s and category 9 (Release 9) up to 23 Mbit / s can be achieved.
HSUPA is part of Release 9 of UMTS. Control Menu
*#*#273283*255*663282*#*#* - This code opens a File copy screen where you can backup your
media files e.g. Images, Sound, Video and Voice memo.
*#*#197328640#*#* - This code can be used to enter into Service mode. You can run various
tests and change settings in the service mode.
*#*#232338#*#* - Shows WiFi MAC address MAC (Media Access Control), address is a globally
unique identifier assigned to network devices, and therefore it is often referred to as hardware
or physical address. MAC addresses are 6-byte (48-bits) in length, and are written in
MM:MM:MM:SS:SS:SS format. The first 3-bytes are ID number of the manufacturer, which is
assigned by an Internet standards body. The second 3-bytes are serial number assigned by the
manufacturer.
*#*#8255#*#* - This code can be used to launch GTalk Service Monitor. Gtalk Service Monitor
and play services monitor are developer options to let you examine and debug the push
connections to google talk and google play services. Below these, the "restore default
heartbeats" button lets you bring back the original heartbeat exchange settings if you have to.
The final button is about making a donation to the developer of this convenient app. and that is
it! now, you are left to experiment with the data and wi-fi settings until you land the most
comfortable intervals for you.
*#*#1111#*#* - FTA SW Version (1234 in the same code will give PDA and firmware version)
*#*#44336#*#* - PDA, Phone, CSCThe Customer Service Code (CSC) plays an important role in
the operation of your mobile device. Different countries have different standards for both voice
and data communications to a cell phone tower. Although most countries follow the
international standard for WiFi connects, there are variations from the standard. The CSC code
ensures that your mobile device complies with the standards for your country, and your cell
phone operator. The CSC code also determines the source for firmware updates via FOTA or
Samsung Kies. , Build Time, Changelist number
Change PIN Change the PIN code of your SIM card using a short code or via your mobile phone
menu. If you have a PIN number on your SIM card as an extra security measure, you'll need to
type the PIN number in each time you turn on your phone. If you do this wrong 3 times, the SIM
card will be locked and you will be unable to use the phone. In this situation, you will need your
PUK code to unlock the SIM. - ** 04 *, then enter the PIN old, and twice a new PIN.
Change PIN2 - ** 042 *, then enter the old The PIN2, and twice the new PIN2.
Unlock SIM-card (PIN) - ** 05 * then enter the PUK and new PIN twice
Unlock SIM-card (PIN2) - ** 052 *, then enter the PUK2 and new PIN2 twice
Call Forwarding (you have to order the service from the operator)
#21# - Deactivate
*21# - Activate
*61# - Activate
Setting the call time until the call forwarding option "no answer"
When installing forwarding on "no answer" you can set the time in seconds that the system
allows you to hook. If during this time you have not picked up the phone, the incoming call will
be diverted.
# 62 # - Deactivate
* 62 # - Activate
#67# - Deactivate
*67# - Activate
**33*password# - Activate
#33*password# - Deactivate
**330*password# - Activate
#330*password# - Deactivate
**331*password# - Activate
#331*password# - Deactivate
**333*password# - Activate
#333*password# - Deactivate
*#333# - Check the condition
**353*password# - Activate
#353*password# - Deactivate
**351*password# - Activate
#351*password# - Deactivate
Call waiting (you have to order the service from the operator)
*43# - Activate
#43# - Deactivate
#77# - Block
*77# - Allow
*#77# - Check the condition
Smart menu
GP - *111#
Rob - *140#
Banglalink - *789#