Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Production Sampling
Cylinders
PRODUCT SPECIFICATION SHEET PRODUCTION
The Flow Through type cylinder is used for the collection of liquid and gas
samples. Each assembly will consist of one Proserv type sample cylinder,
two 1/4” needle valves with NPT female outlets and valve ports fitted NPT
plugs. Cylinders are electro etched with a unique cylinder serial number.
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
The Profisc sample receiver is a portable single piston sample receiver with
one back pressure connection on the secondary end and one product inlet
connection and one flush port on the primary end. For collection of samples
required for transportation to the analysis laboratory and subsequent
storage. Connections are furnished with “mini-valves” with 1/8” AE W125.
Secondary side is also furnished with a 63mm 0-250 bar pressure gauge.
• Light weight single piston sample receiver with internal mixing ball
• Autoclave engineers valves
• Outlet port: 1/8” AE W125
• Volume indicator
• Pressure gauge with range 0-250 bar on back pressure side
• Flushing valve
• Transportation box (DOT requirement)
Technical Specification
Net volume 981 cc Approved for use and transport within, and across borders, in
Europe and USA under the following European directives and
3, 626 psi @ 350.6 FoF
Filling pressure
(250 Bar @ 177oC. See note 1
US special permit:
Cyl body: ASTM B348 Ti Gr. 5 - 97/23/EC (PED)
End caps: ASTM B348 Ti Gr. 2 - US DOT SP-15404
Material Piston: ASTM B348 Ti Gr. 2
Mixing ball: AISI 316 St Stl Design code: generally in accordance with PD 5500
Mini valves: AISI 316 St Stl
Net weight 8.4 kg
Cyl length incl valves and
Dimensions pressure gauge = 696
(mm) Cyl body length = 610 Service:
Cyl O.D = 72
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
• Light weight single piston sample receiver with internal mixing ball
• Autoclave engineers valves
• Outlet port: 1/8” AE W125
• Volume indicator
• Pressure gauge with range 0-250 bar on back pressure side
• Flushing valve
• Transportation box (DOT requirement)
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
• Light weight single piston sample receiver with internal mixing ball
• Autoclave engineers valves
• Outlet port:1/8” AE W125
• Transportation box (DOT requirement)
Technical Specification
Net volume 1000 cc • Approved for use and transport within, and across borders, in
Europe and USA under the following European directives and US
Design
10,000 psi at ambient temp. special permit: 97/23/EC (PED)
pressure
Design • US DOT SP-15404
-20 to 177oC • Design code: generally in accordance with PD 5500
temperature
Cyl body: ASTM B348 Ti Gr. 5
End caps: ASTM B348 Ti Gr. 2
Material Piston: ASTM B348 Ti Gr. 2 Service:
Mixing ball: AISI 316 St Stl
Mini valves: AISI 316 St Stl • UN 1954 Compressed gas, flammable, n.o.s
Net weight 5.7 kg • UN 1964 Hydrocarbon gas mixture, compressed, n.o.s.
• UN 1965 Hydrocarbon gas mixtures, liquefied, n.o.s.
Cyl length incl valves = 660
Dimensions • UN 1053 Hydrogen Sulphide (H2S)
Cyl body length = 610
(mm) • UN 3161 liquefied gas, flammable, n.o.s.
Cyl O.D. = 72
• UN 1971, UN 1972 Natural Gas with Methane content
• Certificate of conformity • UN 1066 Nitrogen, compressed
• Hydrostatic test certificate • UN 1267 Petroleum Crude Oil
• User instructions • UN 1075 Petroleum gases, liquefied or liquefied petroleum gas
Standard • UN 1006 Argon, compressed
• User spare parts list
documentation • UN 1953 compressed gas, toxic, flammable, n.o.s.
• Authorised inspectors
• Certificate of conformance to DOT SP-15404
• Copy of DOT SP-15404
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
The ProLight sample receiver is a portable single piston sample receiver with
an internal mixing ball, double product inlet connections and one back
pressure connection. The double inlet connection is suitable as flush
connection. Connections are furnished with “mini-valves” with 1/8” AE
W125.
• Light weight single piston sample receiver with internal mixing ball
• Autoclave engineers valves
• Outlet port:1/8” AE W125
• Transportation box (DOT requirement)
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
• Angled pattern Ventil valves with 1/4” NPT thread, female ports
• One valve is fitted with a fusible plug burst disc port. Cylinder is
supplied with Fusible plug burst disc fitted
• Blanking plug available separately
• Transportation box available
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
The ProLight flow through type cylinder is used for collecting liquid and gas
samples. Each assembly will consist of one Proserv type sample cylinder, two
1/4” needle valves with NPT female outlets and valve ports fitted with NPT plugs.
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
• Light weight single piston sample receiver with internal mixing ball
• Autoclave engineers valves
• Outlet port: 1/8” AE W125
• Transportation box (DOT requirement)
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
The Flow Through Sample Cylinder is used for the collection of liquid and gas
samples. Each assembly will consist of one Proserv type sample cylinder, two 1/4”
needle valves with NPT female outlets. Valve ports fitted NPT plugs. Cylinders are
electro etched with a unique cylinder serial number.
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
Exploration Sampling
Cylinders
PRODUCT SPECIFICATION SHEET PRODUCTION
The Proserv Flow Through Type Cylinder is used for the collection of liquid
and gas samples. Each assembly will consist of 1 Proserv type sample
cylinder, 2 1/4” needle valves with NPT female outlets and valve ports fitted
NPT plugs. Cylinders are electro etched with a unique cylinder serial number.
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
The Type 5 (10K) Sample Cylinder was designed specifically for the task
of housing samples transferred from the Proserv downhole sampler, for
transportation to the analysis laboratory and subsequent storage. This
transportable sampling cylinder is of piston type with two end caps, sealed
with double ‘O’ rings and back-up rings.
Technical Specification
Net volume 700cc Approved for use and transport within, and across
borders, in Europe, USA and Canada under the
following European directives, US special permit
Filling pressure 10,000psi @ 302°F (690 bar @ 150°C)
and transport Canada equivalency certificate:
- 97/23/EC (PED)
Cylinder and end caps: 17-4PH St. Stl. - US DOT SP-12116
(AISI 630) in NACE MR0175 condition - TC equivalency certificate SU9269
Material
piston and mixing device: 316 St. Stl. (AISI
316) in NACE MR0175 condition
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
The Type 5 (15K) sample cylinder was designed specifically for the task
of housing samples transferred from the Proserv downhole sampler, for
transportation to the analysis laboratory and subsequent storage. This
transportable sampling cylinder is of piston type with two end caps, sealed
with double ‘O’ rings and back-up rings.
Technical Specification
Hydrostatic certificate
• UN 1066 - Nitrogen, compressed
Authorised inspectors certificate of
conformance to DOT SP-12116 and TC • UN 1075 - Petroleum gases, liquefied or liquefied
Standard equivalency certificate SU9269 Petroleum gases
Copy of DOT SP-12116 • UN 1267 - Petroleum Crude Oil
User instructions and user spare parts list • UN 1953 - Compressed gas, toxic, flammable,
n.o.s.
Service
Hydrostatic certificate, with 3rd party • UN 1954 - compressed gas, flammable, n.o.s.
endorsement • UN 1964 - Hydrocarbon gases mixtures,
3rd party inspection release note compressed, n.o.s.
Material certification to EN 10204: • UN 1965 - Hydrocarbon gases mixtures,
3.1 or 3.2 for main pressure retaining liquefied, n.o.s.
Option • UN 1971 - Methane, compressed or Natural Gas,
components
500cc and 1000cc volume options compressed
available
Fully NACE material available for wetted
parts
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
The Type 6 (10K) Cylinder was designed specifically for the task of
housing samples transferred from the Proserv Downhole Sampler, for
transportation to the analysis laboratory and subsequent storage.
• Single piston sample receiver, with internal vortex ring mixing device
• Single phase nitrogen reservoir
• Evacuation/purging port on sample side of cylinder
• Valve inlet/outlet ports: nitrogen reservoir – 1/4” A.E. medium pressure
female. Sample and pre-charge – 1/4” NPT female
• Supplied with aluminium transportation box
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
PRODUCT SPECIFICATION SHEET PRODUCTION
The Type 6 (15K) Cylinder was designed specifically for the task housing
samples transferred from the Proserv downhole sampler, for
transportation to the analysis laboratory and subsequent storage.
• Single piston sample receiver, with internal vortex ring mixing device
• Single phase nitrogen reservoir
• Evacuation/purging port on sample side of cylinder
• Autoclave engineer needle valves integral to end caps
• Valve inlet/outlet ports:- 1/4” A.E. medium pressure female.
• Valve protection guards fitted
• Supplied with aluminium transportation box
Technical Specification
ingenious simplicity
info@proserv.com
www.proserv.com
Subsea Sampling
Cylinders
PRODUCT SPECIFICATION SHEET PRODUCTION/SUBSEA
Technical specification
Description
ingenious simplicity
info@proserv.com
www.proserv.com