Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
UPDATE DESCRIPTION
HAP v4.60. This update to the Hourly Analysis Program (HAP) provides feature enhancements which relate to two
major themes:
1. Theme 1 - Expanded Equipment Modeling Capabilities. Responses to the summer 2011 customer survey
indicated great interest in expanding capabilities to model different types of HVAC equipment and controls.
HAP v4.60 represents a first installment in satisfying these requests by adding models for:
Variable Refrigerant Flow (VRF) equipment.
2-speed fan control in single-zone CAV packaged and split DX equipment.
2-stage compression in single-zone CAV packaged and split DX equipment.
Multiple boilers, boiler sequencing controls, and hot water reset controls for boiler plants.
Condensing and non-condensing boilers.
Variable speed / variable flow condenser water pumps and dry coolers for chiller plants.
In addition, existing simulation models were upgraded for:
All air-cooled DX cooling equipment types.
All air source heat pump heating equipment types.
2. Theme 2 - Expanded Productivity Features. HAP v4.60 also contains features to help you be more productive
using the software, including the ability to:
Merge multiple projects into one large project, to facilitate more efficient collaboration in project teams.
Preserve space and zone assignments when changing system type for an existing air system.
Import simulation weather data from external file formats such as EnergyPlus EPW, ASHRAE IWEC,
ASHRAE IWEC2, NOAA TMY2 and NOAA TMY3.
Further information on these and many other enhancements in HAP v4.60 can be found in the "What's New" window
that appears upon program startup, in the "What's New" section of the on-line help system (section 1.2) and in the
"New Features" document in the Documents folder on the program CD.
INSTALLATION PROCEDURES
To install HAP v4.60 please use the procedures listed below. When installing to a network server, please refer to the
Network_Primer PDF document in the \Document folder of the CD-ROM for additional guidelines.
Make sure your computer meets the minimum requirements:
Hard Disk Space: Full Install: Max 300: megabytes. Typical: 100 megabytes. Patch Install: Minimal disk space.
Operating System: Windows XP, Windows Vista or Windows 7.
X-Builder Framework v1.04u or later.
To perform a full install, please use the following procedure:
Note: When installing HAP on a computer for the first time, you must install X Builder Framework first before
installing HAP. The X Builder Framework installer and installation instructions are provided on the same web
page from which you download HAP v4.60.
Download the e20-hap460.exe full install file from the internet site and save it to your hard disk.
Run Windows Explorer and double-click the e20-hap460.exe file to start the installation
During installation you will be required to enter the customer number and unlock code that you obtained from
Carrier.
PROGRAM DOCUMENTATION
The HAP Quick Reference Guide has been updated. The new manual is dated 2/2012. This manual includes an
overview of the program, tutorials, example problems and application advice. An electronic copy of this manual, in
Adobe Acrobat PDF format, is installed with HAP and can be displayed via the Help Menu while running the
program. The electronic copy of the manual is also provided in the \Manual folder on the program CD.
The program’s on-line help system provides complete documentation for the program. This includes a copy of the
material from the manual plus detailed discussions of program inputs, reports and calculation procedures.