Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1)
OBSERVATIONS:
CONCRETE COHESIVE / SEGREGATING / BLEEDING
TEMPERATURE :
ACTUAL PLASTIC KG/M3 AIR CONTENT 2% YIELD :
DENSITY : (%):
SETTING TIME OF Initial (hr:min) - Final (hr:min) -
CONCRETE :
INITIAL SLUMP -
WORKABILIY SLUMP AFTER 30 MINS -
SLUMP AFTER 60 MINS -
DATE DATE OF WEIGHT DENSITY STRENGT AVERAGE
REF OF AGE SIZE LOAD
H STRENGTH
NO.
CAST TEST
(DAYS) (M3) (KG.)
(KN)
(KG/M3) (N/MM2 (N/MM2)
COMPRESSIVE STRENGTH
)
7 0.15x0.1
5x
7 0.15=
7 0.003375
28 0.15x0.1
5x
28 0.15=
28 0.003375
COMMENTS:
NB:
1. This test report is based on the samples received by our laboratory.
2. The test result relates only to the items tested. Sign:
3. The report shall not be reproduced except in full without the QC Engineer
approval.
I:-Water
A-1:- Cement: -
Brand:
Sl. Requirement
Physical Properties Observed value
No.
2 Standard consistency
5 Specific gravity
Compressive strength
Average
Compressive strength of Load Compressive Compressive Requirement
cement at in KN strength in N/mm² strength in
N/mm²
3-days
7-days
28-days
II:-Fine aggregates (sand):-
Grading test:-
Weight of sample taken= gms. Source:
Cumulative % by Weight of material
IS sieve Weight of
% by Weight of % of material Passing
Size in mm. material
material Retained
retained in
retained
gms
9.5
4.75
2.36
1.18
0.6
0.3
0.15
PAN
Fineness of Modulus =
Specific gravity =
Bulk density =
Water Absorption=
III:-Coarse Aggregates:-
Sieve analysis:
Weight of sample taken= gms. Source:
Bulk density=
Water absorption =
Specific gravity