Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Now some basic theory about the Hindustani classical. If you are aware about this, you can skip
this section.
The smallest interval of tuning system in the hindustani classical is the Sruti. There are 22 srutis
per saptak (octave). However in practice Hindustani classical mainly uses 12 swaras (notes)
grouped in every Saptak (octave). Seven of these are known as Shuddha (pure) and five of them
are called as Vikrit (sharp/flat) making a total of 12 notes per saptak.
Those familiar with western music will immediately recognise this as being similar to the
solfège.
Sa Shadja
Re Rishabh
Ga Gandhar
Ma Madhyam
Pa Pancham
Dha Dhaivat
Ni Nishad
Komal Re (flat)
Komal Ga (flat)
Tivra Ma (sharp)
Komal Ni (flat)
Sa Shadja
Komal Re (flat)
Re Rishabh
Komal Ga (flat)
Ga Gandhar
Ma Madhyam
Tivra Ma (sharp)
Pa Pancham
Dha Dhaivat
Komal Ni (flat)
Ni Nishad
It is important to note that unlike western music, Hindustani music is not based on equal
tempered scale.In simple terms, it means that the pitch(frequency) of the first note Sa is not fixed
(hence the rest of the notes also), nor is the difference between the notes completely fixed.
However, now with the percolation of western instruments like Piano and harmonium people
tend to use fixed scales more often. This point is of great importance to the all the classical
vocalists because depending on your natural vocal range you can choose to sing the classical
compositions in different scales. This is perfectly acceptable in Hindustani. But the same cannot
be said of the popular music which are composed in western fixed scale.
Indian classical music is normally played in 3 registers, Mandhra saptak, Madhyam Saptak and
Taar Saptak, lowest to highest.
Thaat
Thaat is the basic method of classification of various raags which was created by Pt. Vishnu
Narayan Bhatkhande. It is akin to the musical mode that is used in western music. Pt.
Bhatkhande created this system based on the mela system used in the Carnatic music.
Bilawal: S R G m P D N S'
Khamaj: S R G m P D n S'
Kafi: S R g m P D n S'
Asavari: S R g m P d n S'
Bhairavi: S r g m P d n S'
Bhairav: S r G m P d N S'
Kalyan: S R G M P D N S'
Marwa: S r G M P D N S'
Poorvi: S r G M P d N S'
Todi: S r g M P d N S'
Taal
Taal is the word used to denote the rhythmic pattern used in the any composition. For example,
Teen Taal refers to the 16 beat cycle used commonly in Hindustani music.
Raag
A raag (raag) is a set of five or more swaras that are combined according to certain rules to
create a melody of aesthetic value. Every raag has a vadi,samvadi and varjit swara.
Vadi swara is the most prominent note of a raag. It is often said that the vadi swara is the note
used maximum number of times in a raag. However, this is not entirely true nor is there any strict
rule for the same.
Varjit swaras are the notes that must NEVER be used in a raag. However, varjit swaras can
sometimes be used in a raag by clever manipulations. This requires practice and strong
understanding of the raag.
To clarify the concepts stated above lets take an example of raag Yaman.
Raag : Yaman
Thaat : Kalyan
Vadi : Ga
Samvadi : Ni
Varjit : Shuddha Ma
| .
Aaroha : S R G M P D N S
. |
Aaroha : S N D P M G R S
Note : The dot "." above a note denotes the Taar spatak. The line "|" above the note denotes a
tivra (sharp) note.
A raag has both ascending and descending (aroha and avaroha) order of notes.
A raag must have the tonic note. In other words it must have "Sa".
The tivra and komal swaras, should not come in succession in a raag.
There are a few ragas, which are exception to the 2nd rule; yet, they are quite popular and well
accepted as classical ragas.
Like all art forms, rules and strict logic cannot be applied to raags. Raags are not strictly bound
by these rules only. There may be raags with the same notes and their ascending or descending
order; yet, they will sound distinctly different from one another. This happens because different
raags have different styles, mood, vadi, samvadi associated with them.
In classical music performance, these rules are followed strictly. In semi classical, light,
devotional and other forms of Indian music, even if the tune of a song is composed in a raga, the
rules are not strictly followed.
There are hundreds of ragas and each is categorised under one of the thaats explained before.
Each raag is thought to create a specific mood and supposed to be sung in a specific time of the
day. Some raags like Malhar and Vasant are considered appropriate for a specific season rainy
and spring respectively.
Some raags and their corresponding thaats are as below:
Kafi Thaat : Dhanashree, Dhani, Bhimpalasi, Pilu, Shahana, Megh Malhar, Shuddha Sarang,
Bageshwari etc.
Kalyan Thaat : Yaman, Bhupali, Hindol, Kedar, Kamod, etc.
Jaati
Simply speaking Jaati of a raag refers to the number of swaras contained in it's aarohan and
avrohan.
The raag jaatis are as follows :
Samporna-Sampoorna : 7 in aarohan - 7 notes in avarohan. example Yaman
This completes our discussion of basic theory of Hindustani classical music. By no means is this
discussion complete or encyclopedic. However, for a serious student of music this provides a
small platform to start the journey of musical ocean.