Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Design
–– Ball retainer and outer sleeve made of –– Compensate for misalignments of up
PA or POM to 30 ft
–– Hardened steel bearing plates with –– No wiper seal
machined ball guide grooves –– Integrated wiper seals
–– Balls made of rolling bearing steel –– No initial lubrication
Dimensions
C
C1 Main load direction
C2
30´
d D1 D
30´
E
α
Closed
Dimensions (mm) Rows Radial clearance (µm) Load ratings (N)
Ød D C C1 C2 D1 of balls Shaft/bore dyn. C stat. C0
h13 H13 h6/H7 h6/K7 h6/M7 min. max. min. max.
10 19 29 21.6 1.3 18.0 5 +9 +21 +15 600 820 330 480
+36 –6 –12
12 22 32 22.6 1.3 21.0 5 +38 +23 +17 830 1,140 420 620
+10 –5 –11
16 26 36 24.6 1.3 24.9 5 +38 +23 +17 1,020 1,400 530 780
+10 –5 –11
20 32 45 31.2 1.6 30.5 6 +43 +25 +18 2,020 2,470 1,050 1,340
+11 –7 –14
25 40 58 43.7 1.85 38.5 6 +43 +25 +18 3,950 4,820 2,180 2,790
+11 –7 –14
30 47 68 51.7 1.85 44.5 6 +43 +25 +18 4,800 5,860 2,790 3,570
+11 –7 –14
40 62 80 60.3 2.15 58.5 6 +50 +29 +20 8,240 10,070 4,350 5,570
+12 –9 –18
50 75 100 77.3 2.65 71.5 6 +50 +29 +20 12,060 14,730 6,470 8,280
+12 –9 –18
Open
Dimensions (mm) Angle Rows of Radial clearance (µm) Load ratings2) (N)
Ød D C C1 C2 E1) α balls Shaft/bore
h13 H13 (°) h6/H7 h6/K7 h6/M7 dyn. C stat. C0
12 22 32 22.6 1.3 6.5 66 4 +38 +23 +17 1,060 510
+10 –5 –11
16 26 36 24.6 1.3 9.0 68 4 +38 +23 +17 1,500 830
+10 –5 –11
20 32 45 31.2 1.6 9.0 55 5 +43 +25 +18 2,570 1,180
+11 –7 –14
25 40 58 43.7 1.85 11.5 57 5 +43 +25 +18 5,040 2,470
+11 –7 –14
30 47 68 51.7 1.85 14.0 57 5 +43 +25 +18 5,020 2,880
+11 –7 –14
40 62 80 60.3 2.15 19.5 56 5 +50 +29 +20 8,620 4,480
+12 –9 –18
50 75 100 77.3 2.65 22.5 54 5 +50 +29 +20 12,500 6,620
+12 –9 –18
1) Minimum size in relation to Ø d
cc Refer to the diagrams on page 41 for 2) The load ratings apply for the main load direction.
load in the direction of opening.