Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
mission
To be the foremost company
in the precast concrete
product industry
BOARD OF COMMISsIONERS:
1. Budi Harto (President)
2. Nariman Prasetyo To keep up with the industry’s needs and customers’ satisfaction,
3. A. Boediono
Wika Beton run its operation in accordance with the current requirement
4. Asfiah Mahdiani
5. Tumik Kristianingsih
such as ISO 9001 : 2000, occupational safety and health, etc.
6. Priyo Suprobo
BOARD OF directors:
1. Wilfred A. Singkali (President)
2. Entus Asnawi Mukhson
3. Fery Hendriyanto
4. Hadian Pramudita
5. Hari Respati
6. Muhammad Zulkarnain
These products are used as the components of fly over or bridge structures. Initially the
beams were produced only in ”I” shape. Presently, we produce box girders, U-girders, etc.
and also produce voided slab, concrete diaphragm, half slab as complement of the structures.
The girders are produced in two methods, post-tensioned and pretensioned process of
stressing, subject to the conditions and requirements. The pretensioned girders is a monolithic
girder which is economical as it does not require additional prestressing accessories and
prestressing process at the construction site.
Post-tensioned girder is produced in segments and normally assembled and post tensioned
at site. The segmental girder is required when the weight and size of girder does not enable
it to be lifted and transported.
Prestressed Concrete Sheet
Pile was initially produced in flat
shape. PC Corrugated Sheet Pile
is subsequently produced to get
a better performance for certain conditions.
PC sheet pile is normally used as permanent structures of retaining walls like quay walls,
revetments, jetties, break waters, reclamation walls, training dykes, foot protection, dolphins,
dock walls, cut off walls, river embankments, water control gates, etc.
The preference of using concrete sheet pile is for the convenience and the low cost in
its construction/installation work.
The main product of this structures is concrete pipe, which consists of low pressure
pipes and pressure pipes. The low pressure pipe is used as sewerage, water distribution, etc.
The pressure pipe is produced using vibro pressed centrifugal system to get high density
concrete with low permeability and low shrinkage. It is used as raw water transmission pipes
as part of water treatment plant which requires very high resistance to the water pressure.
Railway sleeper produced by Wika Beton is monoblock
pretensioned concrete sleeper using the single line production
system. The production method developed by Wika Beton is
flexible and suitable for the conditions in Indonesia.
The other products related to railway are catenary
poles, slab for railway bridge, ballast protection wall, railway
crossing, etc.
PC PILES
DESCRIPTION
DESCRIPTION
Typeof
Type of Poles
Piles Prestressed Concrete Square Piles
Prestressed Concrete Spun Piles
Prestressed Concrete Spun Square Piles
Prestressed Concrete Triangular Piles
System of Joints Welded at steel joint plate
Type of Shoe Concrete Pencil Shoe (Standard) for PC Spun Piles,
Spun Square Pile & Square Piles
Mamira Shoe (Special Order) for PC Spun Pile
Method of Driving Dynamic Pile Driving : Diesel Hammer and Hydraulic Hammer
Static Pile Driving : Hydraulic Static Pile Driver (Jacking Pile)
MATERIAL SPECIFICATION
Welding ANSI / AWS D1.1 - 900 Structural Welding Code Steel AWS A5.1/E6013
NIKKO STEEL RB 26 / RD 260, LION 26,
or equivalent.
January - 2015
PILE SHAPE & SPECIFICATION | PRESTRESSED CONCRETE SPUN PILES
PRESTRESSING STEEL
SIZE SPIRAL
PILE LENGTH
WALL (t)
SIZE
PILE SECTION
PILE LENGTH
SIZE
SIZE
PILE LENGTH
PILE SECTION
PRESTRESSING STEEL
SIZE
SPIRAL
PILE LENGTH
E
SIZ
JOINT PLATE (MIDDLE PILE)
WITHOUT JOINT PLATE (UPPER PILE) BOTTOM / SINGLE PILE
SIZE
SIZE
PILE SECTION
PILE LENGTH
PILE LENGTH
SIZE
PILE SECTION
PILE LENGTH
Bending Moment
Section Unit Allowable Decompression Length
Size Thickness Cross
Section Inertia Weight Class Crack Ultimate Compression Tension of Pile *
( mm ) Wall ( t )
( cm2 ) ( cm4 ) ( kg/m ) ( ton.m ) ( ton.m ) ( ton ) ( ton ) (m)
400 X 400 75 1109.13 194,159 277 A2 6.50 10.00 182.63 38.00 6 - 13
A3 8.00 12.00 180.62 45.30 6 - 14
B 10.00 18.00 173.15 73.10 6 - 15
C 11.00 22.00 169.49 91.70 6 - 16
450 X 450 80 1364.48 307,000 341 A1 8.50 12.50 227.01 38.20 6 - 13
A2 11.00 17.00 222.95 52.90 6 - 15
A3 13.00 20.90 219.05 67.10 6 - 16
B 13.50 24.00 215.32 80.90 6 - 16
C 15.50 31.00 208.10 114.00 6 - 16
Note : *) Length of pile may exceed usual standard whenever lifted in certain position Unit Conversion : 1 ton = 9.8060 kN
PRODUCT APPLICATION
Piles foundation for Power Plant Piles for Marine Structurer Piles Foundation for Building Piles Foundation for Bridges
or Industrial Factory
- ENGINEERING
In order to respond to the customers’ needs Wika Beton is able to provide engineering services
to review the design.
The engineering softwares are always updated and the engineers are trained to keep up with
the latest softwares.
The engineering services are meant for design review so that the customers will get feed back
whether their design is efficient enough.
It is important as some of the products are customized and subject to the required design.
- DELIVERY
- INSTALLATION
- CONSTRUCTION
Head Office,
Sales Offices,
Factories and
subsidiaries
HEAD OFFICE WILAYAH PENJUALAN II
(REPRESENTATIF LAMPUNG)
WILAYAH PENJUALAN VI
Jl. Kima Raya II Kav. S/4-5-6
KARAWANG
Jl. Surya Madya III Kav. I-34
CRUSHING PLANT BOGOR
Kampung Cikalong, Desa Mekar
Gedung JW, Jl. Raya Jatiwaringin Jl. Wolter Monginsidi No. 222 Kawasan Industri Makassar, Kawasan Industri Suryacipta Jaya, Kecamatan Cigudeg,
No. 54, Pondok Gede, Bekasi 17411 Teluk Betung, Bandar Lampung Makassar 90241 Karawang 41361 Kabupaten Bogor 16660
Telp. : (021) 84973363 (Hunting) 35215 Telp. : (0411) 511761, 4723100 Telp. : (021) 89115167 Telp. : (0251) 8680232
(021) 85905570 (Marketing) Telp. : (0721) 482336 Fax. : (0411) 511955 , 4723166 Fax. : (0267) 8610259
Fax. : (021) 84973391, 84973392 Fax : (0721) 482336 Email : wilayah6@wika-beton.co.id Email : ppb_karawang@wika-beton.
Email : wbcc@wika-beton.co.id Email : lampung@wika-beton.co.id co.id SUBSIDIARIES
marketing@wika-beton.co.id
PT WIJAYA KARYA komponen
Web. : www.wikabeton.co.id
WILAYAH PENJUALAN III FACTORies MAJALENGKA
beton (pt wika kobe)
Jl. Biru Laut X No. 20-21 Jl. Raya Barat Burujul Kulon,
SEKRETARIAT PPWB Sumatera Utara Jl. Surya Madya III, Kav. I-28Q
Jakarta 13340 Jatiwangi, Majalengka 45454
GEDUNG JW, Jl. Raya Jatiwaringin Jl. Binjai Km. 15,5 No. 1 Diski Kawasan Industri Suryacipta,
Telp. : (021) 8193024 Telp. : (0233) 882575
No. 54, Pondok Gede, Bekasi 17411 Deli Serdang 20351 Karawang 41361
Fax. : (021) 8560694 Fax. : (0233) 882575
Telp. : (021) 84973363 (Hunting) Telp. : (061) 8821543, 8821111 Telp. : (0267) 8630416-17, 8637597
Email : wilayah3@wika-beton.co.id Email : ppb_majalengka@wika-
Fax. : (021) 84973391, 84973392 Fax. : (061) 8821668 Fax. : (0267) 8630349
beton.co.id
Email : pp_ppwb@wika-beton.co.id Email : ppb_sumut@wika-beton.co.id Email : marketing@wikakobe.com
WILAYAH PENJUALAN IV BOYOLALI
Sales Offices Jl. Teuku Umar No. 21
LAMPUNG
Jl. Raya Boyolali-Solo Km. 4,5 PT WIJAYA KARYA KRAKATAU
Semarang 50234 Mojosongo, Boyolali 57300 BETON (PT WIKA KRATON)
WILAYAH PeNJUALAN I Telp. : (024) 8411890, 8318787 Jl. Raya Tegineneng Km. 35
Telp. : (0276) 321138 Jl. Australia I, Kav. K2/1,
Jl. Gunung Krakatau No. 15 Fax. : (024) 8318135, 8318091 Desa Bumi Agung, Pesawaran 35363
Fax. : (0276) 322136 Kawasan KIEC Kel. Warnasari,
Medan 20239 Telp. : (0725) 411318
_ Printed on 7 January 2016