Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Overview
Slot 3 Slot 4
Slot 5 Slot 6
Slot 1 Slot 2
Note:
In the transmission networking scenario, users need to install an OSIC board in slot 4.
In the active fiber optic transmission testing scenario, if the number of test links is less than four, users can install a WDM board in slot 1
instead of a WDMU.
If the OTBN board is of version A, the OTBN board provides only an OPITCAL port.
Remarks: Specifications
1. The dynamic range determines the maximum length of 3 ns, 5 ns, 10 ns, 30 ns, 100 ns, 300 ns,
optical fibers that can be tested. When the attenuation is Test Pulse Width 1 us, 2 us, 10 us, and 20 us
fixed, a larger dynamic range indicates that a longer optical
4 km, 8 km, 12 m, 20 km, 40 km, 80 km,
fiber can be tested.
Test Range 120 km, 160 km, 240 km, 320 km, 400
2. Active fiber monitoring and test conditions: km, and 480 km
a) 10 Gbit/s services use the NRZ cording format, and the
FEC is less than or equal to 1.00E-05. Sampling Resolution 2 m, 1 m, 0.5 m, 0.1 m, and 0.033 m
b) 100 Gbit/s services use the SDFEC2 cording format, and Test Distance Difference
1 m resolution 0.0025% x test
the FEC is less than or equal to 1.00E-02. distance
c) The test pulse width is 10,000 ns. Fault Dead Zone from the
50 m (10 ns)
3. The test pulse width in the dark fiber monitoring and test Start End
scenario is 20,000 ns.
Maximum Sample Points 1,600,000 V200R016C00 and later)