Sei sulla pagina 1di 2

resistor series-parallel arrangement

tujuan: 1. Preparing a series resistor in series,parallel,and series-parallel


(kompoun)

2. large measure replacement resistor circuit : series,parallel,and series-parallel


(kompoun)

Procedure :

1. Arrange a series resistor as shown below


2. Measuring the resistance / baries

Equipment and material :

1. Resistor 100
2. Analog multimeters
3. Cable
4. Sockete panel

Dasar theory

Resistors are one of the electronic components that serve as a barriers to the flow
of electricity. In an electronic circuit,resistors are usually arranged in two
ways,namely parallel and series.

1. Resistor connected in series


Resistors are electronic components that are inhibiting the flow of
electricity, if several resistors arranged in series or rows, the greater the
resistance, which will reduce the amount of electrical current flowing in the
circuit. From this statement obtained RTS formula (resisto Total linked in
series) is:
2. Resistors are connected in parallel
If several resistors arranged in parallel or in rows, the smaller the total
resistance, resistors are arranged in parallel serves to divide the flow of
electric current.
From this statement obtained formula RTP (R Total were linked in Parallel)
are:
http://kibogowonto.wordpress.com/2011/05/10/rangkaian-seri-paralel-
resitor/
3. Resistor series-parallel circuit
kompoun replacement series resistance is a combination of series and
parallel arrangement

of the experimental results, using 100 ohm resistance by 8 pieces, we can


calculate the resistance of each obstacle to put them in series, parallel, and
series-parallel (kompoun). data obtained from the resistance can be seen
from the results of manual calculation and measurement results by using
tools such as analog multimeter.
then we can discuss what we have obtained from the results of
experiments that we have done are: calculate the resistance of R1, R2, R3
resistor in series-parallel circuit. the resistance R1 we can take the results
by calculation: 275 medium by measurement: 280 difference between the
two is 5persen. the resistance R2 is 300, according to calculations by the
measurement were also 300 then there is no difference between the two is
the same. and the resistance R3 275 and the results of the calculation are
the same measurements, so there is no difference between the two as well.

Potrebbero piacerti anche