Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Hot Rolled Heavy Plates Hot Rolled Plates, Sheets and Strips From Coil
In different qualities and norms as EN, DIN, ASTM etc.
Thickness : from 5 mm up to 400 mm Thickness : from 2 mm up to 15 mm
Width : up to 4000 mm Width : up to 2000 mm
Length : up to 18000 mm Length : as request
All these products can be provided from stock All these products can be provided from stock
immediately or short rolling time. immediately or short rolling time.
LONG PRODUCTS
Structural shapes and wide flange beams European Channels
IPE 100-600 in acc. with DIN 1025-5 UPE 80-400
IPEA 100-600 UNP 100-400
IPN 100-600 Sheet Piling Sections
IPB (HEB) 100-1000 in acc. with DIN 1025-2 Column Sections
IPB I (HEA) 100-1000 Y-Steel Sleepers
IPBV (HEM) 100-1000 Bearing Pile Sections
IPB IL (HEA A) 100-1000 Mine Support Sections
Angles Bars
Equal Angles starting from 20 x 20 up to Square, Round, Rectangular and Hexagonal bars
250 x 250 with different thickness Hard Chromium plated bars
Unequal Angles Plain and reinforcing steel bars from
6 mm up to 50 mm
Hollow Sections High strength stress bars for post tensioned
Seamless and E.R welded, hot finished, anchorages
normalized or annealed Alloy bars
EN 10210-1, DIN 17100 Flat bars
Stainless Steel Bars
Crain Rails
A45, A55, A65, A75, A100, A120, A150
and with necessary fastening and
installation accessories
Light Rails S7, S10, S14, S18, S20 etc.
PIPES
Seamless Pipes and Welded Pipes
• Seamless hot rolled heavy wall mechanical tubes • Line pipes - seamless Carbon Steel and alloy
• Seamless cold drawn tubes suitable for honing steel pipes acc to API and ASTM standard
• Seamless cold drawn tubes suitable for shaft and • Medium and large size ERW and Saw welded tubes
cylinders • Outside or inside hard chromium plated tubes
• Seamless cold drawn hydraulic oil pipes • Heat Exchanger tubes, Precision Tubes
• Seamless cold drawn for mechanical application • Stainless steel pipes, welded or seamless
• Seamless cold drawn cylinder tubes, inside Drilled Pipes
honed ISO H8 • Welded pipes “AD-PE” conduit
• Welded-cold drawn cylinder tubes,
inside H9 and H10
FITTINGS, VALVES and OTHER PIPING MATERIALS
Fittings Valves
ACC to API, ASTM and EN standards, Cast, Forged or SS. ACC to API, ASTM and EN standards, Cast, Forged or SS.
Elbows Gate Valves
Bends Globe Valves
Reducers (Concentris, Eccentric...) Check Valves
Caps Butterfly Valves
Nippels “Y” Strainers
Welding Bosses
Hex Head Plugs Flanges
Unions c/w Welding Necks, Slips, Bolts, other necessary trims.
Tee’s
Bolts, Nuts, Washers
The above listing only shows general most common headlines, please ask us your requirements.
MEBA STEEL:
YOUR RELIABLE
BUSINESS PARTNER
MEBA STEEL
Meba Steel & Industrial Supplies Trade GmbH