Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Version 1.0
Date: 2016.09.06
Introduction
Yeastar S-Series VoIP PBX provides Auto Provisioning App to help you set up IP
phones and Yeastar VoIP gateways in bulk.
Using auto provisioning, you can instruct phone or gateway to retrieve its
configuration from Yeastar S-Series PBX system. Once you provision a
phone/gateway, the phone/gateway will automatically configure itself correctly and
you will be able to manage the phone or gateway centrally without having to log in the
phone’s or the gateway’s web interface one by one.
1. Plug the phone/gateway into the same network with the PBX.
2. Make sure that the phone/gateway’s PnP feature is enabled. By default, the PnP
is enabled in Yeastar gateways and most of IP phones.
3. Configure the phone/gateway on the “Auto Provisioning” page.
4. Click “Save” and reboot the phone/gateway.
5. The phone/gateway will send a multicast message across the LAN when boots
up.
6. The PBX will send a provisioning URL to the phone.
7. The phone download configuration file from the URL, resolve and apply the
settings.
2/3
Auto Provisioning
DHCP Method
If the phone you are using does not support plug and play, you can use DHCP mode
to do auto provisioning. For cisco, Polycom and Aastra phones, you should provision
the phones using DHCP mode as follows:
3/3