Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
com/Mirror/Doc/MAD2/Electrolux/English%20Asia/Conveyor%20Ve
getable%20Washer%20300-800%20Kg-hr_English_660068_English%20Asia.pdf
http://www.cassavaprocessingmachine.com/camachine_machinery/rotary_vacuum_filter_1222.html
Hilterman, J., Lodewijks, G., Rijsenbrij J.C., Schott, D.L., Dekkers, J.A.M.J., and Pang, Y. (2011), “A
methodology to predict power savings of troughed belt conveyors by speed control”, Particulate science
and technology
The washer conveyor is a washing technology designed for cleaning the dirt attached to the feed Elephant
foot yam (EFY). The energy requirement of the conveyor washer that could accommodate the given feed
The washer conveyor has a capacity of 300-800 kg/hr. To accommodate the desired feed of 10 tons in a
day operation,
416.67𝑘𝑔
× 24 ℎ𝑟𝑠 𝑜𝑝𝑒𝑟𝑎𝑡𝑖𝑜𝑛 = 10000 𝑘𝑔 𝐸𝐹𝑌
ℎ𝑟
From industrial applications with the same range of capacity rate, the washing equipment has a power
In general, the electrical power required to drive a washer conveyor depends on the belt conveyor design
characteristics, and its length ( Pang,Y. et al 2011), which is specified under the equipment design section.
The peeling machine technology works on a mechanism that was developed with an
intention to reduce cost and working time consumption. It works in a manner that a revolving
blade is held by a support arm and is rotated by the same motor. Additionally, the revolving blade
is movable along the surface of the yam by the arm and the revolving blade is brought into contact
Peeling machines’ energy requirement can be calculated using the washed Elephant foot yam which has
A total power of 1hp and a range from 300-500 kg/hr capacity (Shree Hari)of feed is necessary for the
peeling machine to operate. For the peeling machine to hold the total mass washed EFY,
412.5 𝑘𝑔
× 24ℎ𝑟𝑠 𝑜𝑝𝑒𝑟𝑎𝑡𝑖𝑜𝑛 = 9900 𝑘𝑔 𝑤𝑎𝑠ℎ𝑒𝑑 𝐸𝐹𝑌
ℎ𝑟
The peeling machine has a power capacity of 1hp and the energy requirement of the peeling machine
The Rotary Vacuum Drum Filter is one of the oldest filters applied to the chemical process
industry. It is the most widely used of the continuous filters where it accounts for design variations,
including operation as either a pressure filter or a vacuum filter. Therefore, rotary vacuum drum
filters are certainly used in to the best part of solid liquid separation process.
In most starch producing industries, the rotary vacuum filter has a vacuum pressure that ranges
𝑃𝑣𝑎𝑐𝑢𝑢𝑚 = 60000 𝑃𝑎
From figure 4.2 of the mass balance section, the mass of the filtrate is 19551 kg H2O.
Using the ρ of water at 25°C, the energy requirement to maintain the vacuum inside the pump can be
calculated as follows:
𝑚𝑎𝑠𝑠 𝑜𝑓 𝑓𝑖𝑙𝑡𝑟𝑎𝑡𝑒
𝑣𝑜𝑙𝑢𝑚𝑒 𝑜𝑓 𝑓𝑖𝑙𝑡𝑟𝑎𝑡𝑒 =
𝑑𝑒𝑛𝑠𝑖𝑡𝑦 𝑜𝑓 𝑓𝑖𝑙𝑡𝑟𝑎𝑡𝑒
19551 𝑘𝑔
𝑣𝑜𝑙𝑢𝑚𝑒 𝑜𝑓 𝑓𝑖𝑙𝑡𝑟𝑎𝑡𝑒 =
1000𝑘𝑔/𝑚3
−𝟒
𝒎𝟑
𝑞̇ = 𝟐. 𝟐𝟔𝟐𝟖𝒙𝟏𝟎
𝒔
Rotary filter 2
The rotary vacuum filter can be used in all kinds of starch production line. Its main function
is to remove the water from the starch pulp. The rotary vacuum filter has a vacuum pressure that
𝑃𝑣𝑎𝑐𝑢𝑢𝑚 = 60000 𝑃𝑎
From figure 4.5 of the mass balance section, the mass of the filtrate is 85015.26 kg H2O.
The mass of the clarified fermentation solution and its volume are
𝑚𝑎𝑠𝑠 𝑜𝑓 𝑓𝑖𝑙𝑡𝑟𝑎𝑡𝑒
𝑣𝑜𝑙𝑢𝑚𝑒 𝑜𝑓 𝑓𝑖𝑙𝑡𝑟𝑎𝑡𝑒 =
𝑑𝑒𝑛𝑠𝑖𝑡𝑦 𝑜𝑓 𝑓𝑖𝑙𝑡𝑟𝑎𝑡𝑒
18015.26 𝑘𝑔
𝑣𝑜𝑙𝑢𝑚𝑒 𝑜𝑓 𝑓𝑖𝑙𝑡𝑟𝑎𝑡𝑒 =
1000𝑘𝑔/𝑚3
L=(D+d)/2 x 3.1416+2C
S=D x RPM x .2618 x 1.021
pounds per hour: P=G2/(S x 60) x C(in feet)
Level Conveyors: HP=(F x S x (P+M))/33,000
Using a pressure drop of 0.04~0.06 MPa to filter the starch slurry, the solids concentration in the
slurry is found to be
𝑘𝑔 𝑠𝑜𝑙𝑖𝑑
𝑐𝑥 =
𝑘𝑔 𝑠𝑙𝑢𝑟𝑟𝑦
1805.57𝑘𝑔
𝑐𝑥 = = 0.6098
2961.13 𝑘𝑔
A 1:1 ratio of kilogram wet cake to kilogram dry cake, can be used to calculate the filter area needed to
filter 86170.82 kg Starch filtrate in a 24-hr basis operation. Thus,
𝑘𝑔 𝑠𝑜𝑙𝑖𝑑𝑠
𝑐𝑠 =
𝑚3 𝑓𝑖𝑙𝑡𝑟𝑎𝑡𝑒
1805.57 𝑘𝑔
𝑐𝑠 =
85.015 𝑚3