Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
abstract—These instructions give you guidelines for preparing II. GUIDELINES FOR MANUSCRIPT PREPARATION
papers for IEEE Transactions and Journals. Use this document
When you open TRANS-JOUR.DOC, select “Page Layout”
as a template if you are using Microsoft Word 6.0 or later.
Otherwise, use this document as an instruction set. The electronic from the “View” menu in the menu bar (View | Page Layout),
file of your paper will be formatted further at IEEE. Paper titles (these instructions assume MS 6.0. Some versions may have
should be written in uppercase and lowercase letters, not all alternate ways to access the same functionalities noted here).
uppercase. Avoid writing long formulas with subscripts in the Then, type over sections of TRANS-JOUR.DOC or cut and
title; short formulas that identify the elements are fine (e.g., "Nd– paste from another document and use markup styles. The pull-
Fe–B"). Do not write “(Invited)” in the title. Full names of
down style menu is at the left of the Formatting Toolbar at the
authors are preferred in the author field, but are not required.
Put a space between authors’ initials. Define all symbols used in top of your Word window (for example, the style at this point
the abstract. Do not cite references in the abstract. Do not delete in the document is “Text”). Highlight a section that you want
the blank line immediately above the abstract; it sets the footnote to designate with a certain style, then select the appropriate
at the bottom of this column. name on the style menu. The style will adjust your fonts and
line spacing. Do not change the font sizes or line spacing to
Index Terms—Enter key words or phrases in alphabetical squeeze more text into a limited number of pages. Use italics
order, separated by commas. For a list of suggested keywords,
send a blank e-mail to keywords@ieee.org or visit
for emphasis; do not underline.
http://www.ieee.org/organizations/pubs/ani_prod/keywrd98.txt To insert images in Word, position the cursor at the
insertion point and either use Insert | Picture | From File or
copy the image to the Windows clipboard and then Edit | Paste
I. INTRODUCTION Special | Picture (with “float over text” unchecked).
IEEE will do the final formatting of your paper. If your
T HIS document is a template for Microsoft Word versions
6.0 or later. If you are reading a paper or PDF version of
this document, please download the electronic file,
paper is intended for a conference, please observe the
conference page limits.
TRANS-JOUR.DOC, from the IEEE Web site at A. Abbreviations and Acronyms
http://www.ieee.org/web/publications/authors/transjnl/index.html so Define abbreviations and acronyms the first time they are
you can use it to prepare your manuscript. If you would prefer used in the text, even after they have already been defined in
to use LATEX, download IEEE’s LATEX style and sample the abstract. Abbreviations such as IEEE, SI, ac, and dc do not
files from the same Web page. Use these LATEX files for have to be defined. Abbreviations that incorporate periods
formatting, but please follow the instructions in TRANS- should not have spaces: write “C.N.R.S.,” not “C. N. R. S.”
JOUR.DOC or TRANS-JOUR.PDF. Do not use abbreviations in the title unless they are
If your paper is intended for a conference, please contact unavoidable (for example, “IEEE” in the title of this article).
your conference editor concerning acceptable word processor
formats for your particular conference.
B. Other Recommendations
Use one space after periods and colons. Hyphenate complex
This paragraph of the first footnote will contain the date on which you
submitted your paper for review. It will also contain support information,
modifiers: “zero-field-cooled magnetization.” Avoid dangling
including sponsor and financial support acknowledgment. For example, “This participles, such as, “Using (1), the potential was calculated.”
work was supported in part by the U.S. Department of Commerce under Grant [It is not clear who or what used (1).] Write instead, “The
BS123456”.
The next few paragraphs should contain the authors’ current affiliations,
potential was calculated by using (1),” or “Using (1), we
including current address and e-mail. For example, F. A. Author is with the calculated the potential.”
National Institute of Standards and Technology, Boulder, CO 80305 USA (e- Use a zero before decimal points: “0.25,” not “.25.” Use
mail: author@ boulder.nist.gov).
S. B. Author, Jr., was with Rice University, Houston, TX 77005 USA. He
“cm3,” not “cc.” Indicate sample dimensions as “0.1 cm 0.2
is now with the Department of Physics, Colorado State University, Fort cm,” not “0.1 0.2 cm2.” The abbreviation for “seconds” is
Collins, CO 80523 USA (e-mail: author@lamar.colostate.edu). “s,” not “sec.” Use “Wb/m2” or “webers per square meter,”
T. C. Author is with the Electrical Engineering Department, University of
Colorado, Boulder, CO 80309 USA, on leave from the National Research
not “webers/m2.” When expressing a range of values, write “7
Institute for Metals, Tsukuba, Japan (e-mail: author@nrim.go.jp). to 9” or “7-9,” not “7~9.”
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 2
A parenthetical statement at the end of a sentence is Italicize symbols (T might refer to temperature, but T is the
punctuated outside of the closing parenthesis (like this). (A unit tesla). Refer to “(1),” not “Eq. (1)” or “equation (1),”
parenthetical sentence is punctuated within the parentheses.) except at the beginning of a sentence: “Equation (1) is ... .”
In American English, periods and commas are within
quotation marks, like “this period.” Other punctuation is IV. UNITS
“outside”! Avoid contractions; for example, write “do not” Use either SI (MKS) or CGS as primary units. (SI units are
instead of “don’t.” The serial comma is preferred: “A, B, and strongly encouraged.) English units may be used as secondary
C” instead of “A, B and C.” units (in parentheses). This applies to papers in data storage.
If you wish, you may write in the first person singular or For example, write “15 Gb/cm2 (100 Gb/in2).” An exception is
plural and use the active voice (“I observed that ...” or “We when English units are used as identifiers in trade, such as
observed that ...” instead of “It was observed that ...”). “3½-in disk drive.” Avoid combining SI and CGS units, such
Remember to check spelling. If your native language is not as current in amperes and magnetic field in oersteds. This
English, please get a native English-speaking colleague to often leads to confusion because equations do not balance
carefully proofread your paper. dimensionally. If you must use mixed units, clearly state the
units for each quantity in an equation.
C. How to Create a PostScript File The SI unit for magnetic field strength H is A/m. However,
if you wish to use units of T, either refer to magnetic flux
First, download a PostScript printer driver from
density B or magnetic field strength symbolized as µ0H. Use
http://www.adobe.com/support/downloads/pdrvwin.htm (for
the center dot to separate compound units, e.g., “A·m2.”
Windows) or from http://www.adobe.com/support/downloads/
pdrvmac.htm (for Macintosh) and install the “Generic
V. SOME COMMON MISTAKES
PostScript Printer” definition. In Word, paste your figure into
a new document. Print to a file using the PostScript printer The word “data” is plural, not singular. The subscript for
driver. File names should be of the form “fig5.ps.” Use Open the permeability of vacuum µ0 is zero, not a lowercase letter
Type fonts when creating your figures, if possible. A listing of “o.” The term for residual magnetization is “remanence”; the
the acceptable fonts are as follows: Open Type Fonts: Times adjective is “remanent”; do not write “remnance” or
Roman, Helvetica, Helvetica Narrow, Courier, Symbol, “remnant.” Use the word “micrometer” instead of “micron.” A
Palatino, Avant Garde, Bookman, Zapf Chancery, Zapf graph within a graph is an “inset,” not an “insert.” The word
Dingbats, and New Century Schoolbook. “alternatively” is preferred to the word “alternately” (unless
you really mean something that alternates). Use the word
III. MATH “whereas” instead of “while” (unless you are referring to
simultaneous events). Do not use the word “essentially” to
If you are using Word, use either the Microsoft Equation
mean “approximately” or “effectively.” Do not use the word
Editor or the MathType add-on (http://www.mathtype.com)
“issue” as a euphemism for “problem.” When compositions
for equations in your paper (Insert | Object | Create New |
are not specified, separate chemical symbols by en-dashes; for
Microsoft Equation or MathType Equation). “Float over text”
example, “NiMn” indicates the intermetallic compound
should not be selected.
Ni0.5Mn0.5 whereas “Ni–Mn” indicates an alloy of some
A. Equations composition NixMn1-x.
Number equations consecutively with equation numbers in Be aware of the different meanings of the homophones
parentheses flush with the right margin, as in (1). First use the “affect” (usually a verb) and “effect” (usually a noun),
equation editor to create the equation. Then select the “complement” and “compliment,” “discreet” and “discrete,”
“Equation” markup style. Press the tab key and write the “principal” (e.g., “principal investigator”) and “principle”
equation number in parentheses. To make your equations more (e.g., “principle of measurement”). Do not confuse “imply”
compact, you may use the solidus ( / ), the exp function, or and “infer.”
appropriate exponents. Use parentheses to avoid ambiguities Prefixes such as “non,” “sub,” “micro,” “multi,” and “ultra”
in denominators. Punctuate equations when they are part of a are not independent words; they should be joined to the words
sentence, as in they modify, usually without a hyphen. There is no period
after the “et” in the Latin abbreviation “et al.” (it is also
r2 italicized). The abbreviation “i.e.,” means “that is,” and the
0
F ( r, ) dr d [ r2 / ( 2 0 )]
(1) abbreviation “e.g.,” means “for example” (these abbreviations
are not italicized).
exp ( | z j zi | ) J 1 ( r2 ) J 0 ( ri ) d .
1
0 A general IEEE styleguide is available at
http://www.ieee.org/web/publications/authors/transjnl/index.html
Be sure that the symbols in your equation have been defined
before the equation appears or immediately following.
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 3
TABLE I
UNITS FOR MAGNETIC PROPERTIES
Conversion from Gaussian and
Symbol Quantity
CGS EMU to SI a
magnetic flux 1 Mx 108 Wb = 108 V·s
B magnetic flux density, 1 G 104 T = 104 Wb/m2
magnetic induction
H magnetic field strength 1 Oe 103/(4) A/m
m magnetic moment 1 erg/G = 1 emu
103 A·m2 = 103 J/T
M magnetization 1 erg/(G·cm3) = 1 emu/cm3
103 A/m
4M magnetization 1 G 103/(4) A/m
specific magnetization 1 erg/(G·g) = 1 emu/g 1 A·m2/kg
j magnetic dipole 1 erg/G = 1 emu
moment 4 1010 Wb·m
J magnetic polarization 1 erg/(G·cm3) = 1 emu/cm3
4 104 T
, susceptibility 1 4
mass susceptibility 1 cm3/g 4 103 m3/kg
Fig. 1. Magnetization as a function of applied field. Note that “Fig.” is permeability 1 4 107 H/m
abbreviated. There is a period after the figure number, followed by two = 4 107 Wb/(A·m)
spaces. It is good practice to explain the significance of the figure in the r relative permeability r
caption. w, W energy density 1 erg/cm3 101 J/m3
N, D demagnetizing factor 1 1/(4)
Vertical lines are optional in tables. Statements that serve as captions for
the entire table do not need footnote letters.
a
VI. GUIDELINES FOR GRAPHICS PREPARATION Gaussian units are the same as cg emu for magnetostatics; Mx =
maxwell, G = gauss, Oe = oersted; Wb = weber, V = volt, s = second, T =
AND SUBMISSION
tesla, m = meter, A = ampere, J = joule, kg = kilogram, H = henry.
A. Types of Graphics
The following list outlines the different types of graphics
in one of the following programs you will be able to submit
published in IEEE journals. They are categorized based on the graphics without converting to a PS, EPS, TIFF, PDF, or
their construction, and use of color / shades of gray: PNG file: Microsoft Word, Microsoft PowerPoint, or
Microsoft Excel. Though it is not required, it is recommended
1) Color/Grayscale figures
that these files be saved in PDF format rather than DOC, XLS,
Figures that are meant to appear in color, or shades of
or PPT. Doing so will protect your figures from common font
black/gray. Such figures may include photographs,
and arrow stroke issues that occur when working on the files
illustrations, multicolor graphs, and flowcharts. across multiple platforms. When submitting your final paper,
2) Lineart figures your graphics should all be submitted individually in one of
Figures that are composed of only black lines and shapes.
these formats along with the manuscript.
These figures should have no shades or half-tones of gray.
Only black and white. D. Sizing of Graphics
3) Author photos Most charts, graphs, and tables are one column wide (3.5
Head and shoulders shots of authors which appear at the inches / 88 millimeters / 21 picas) or page wide (7.16 inches /
end of our papers. 181 millimeters / 43 picas). The maximum depth a graphic can
4) Tables be is 8.5 inches (216 millimeters / 54 picas). When choosing
Data charts which are typically black and white, but the depth of a graphic, please allow space for a caption.
sometimes include color. Figures can be sized between column and page widths if the
B. Multipart figures author chooses, however it is recommended that figures are
not sized less than column width unless when necessary.
Figures compiled of more than one sub-figure presented There is currently one publication with column
side-by-side, or stacked. If a multipart figure is made up of measurements that don’t coincide with those listed above.
multiple figure types (one part is lineart, and another is PROCEEDINGS OF THE IEEE has a column measurement of 3.25
grayscale or color) the figure should meet the stricter inches (82.5 millimeters / 19.5 picas).
guidelines. The final printed size of author photographs is exactly
C. File Formats For Graphics 1 inch wide by 1.25 inches tall (25.4 millimeters x 31.75
Format and save your graphics using a suitable graphics millimeters / 6 picas x 7.5 picas). Author photos printed in
processing program that will allow you to create the images as editorials measure 1.59 inches wide by 2 inches tall (40
PostScript (PS), Encapsulated PostScript (.EPS), Tagged millimeters x 50 millimeters / 9.5 picas x 12 picas).
Image File Format (.TIFF), Portable Document Format
(.PDF), or Portable Network Graphics (.PNG) sizes them, and
adjusts the resolution settings. If you created your source files
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 4
from the manuscript in one of the file formats listed above in them all; use et al. only if names are not given. Use commas
section VI-J. Place figure captions below the figures; place around Jr., Sr., and III in names. Abbreviate conference titles.
table titles above the tables. Please do not include captions as When citing IEEE transactions, provide the issue number,
part of the figures, or put them in “text boxes” linked to the page range, volume number, year, and/or month if available.
figures. Also, do not place borders around the outside of your When referencing a patent, provide the day and the month of
figures. issue, or application. References may not include all
information; please obtain and include relevant information.
N. Color Processing / Printing in IEEE Journals Do not combine references. There must be only one reference
All IEEE Transactions, Journals, and Letters allow an author with each number. If there is a URL included with the print
to publish color figures on IEEE Xplore® at no charge, and reference, it can be included at the end of the reference.
automatically convert them to grayscale for print versions. In Other than books, capitalize only the first word in a paper
most journals, figures and tables may alternatively be printed title, except for proper nouns and element symbols. For papers
in color if an author chooses to do so. Please note that this published in translation journals, please give the English
service comes at an extra expense to the author. If you intend citation first, followed by the original foreign-language
to have print color graphics, include a note with your final citation See the end of this document for formats and
paper indicating which figures or tables you would like to be examples of common references. For a complete discussion of
handled that way, and stating that you are willing to pay the references and their formats, see “The IEEE Style Manual,”
additional fee. available as a PDF link off the Author Digital Toolbox main
page.
APPENDIX
VIII. SUBMITTING YOUR PAPER FOR REVIEW
Appendixes, if needed, appear before the acknowledgment.
A. Review Stage Using Word 6.0 or Higher
ACKNOWLEDGMENT If you want to submit your file with one column
The preferred spelling of the word “acknowledgment” in electronically, please do the following:
American English is without an “e” after the “g.” Use the --First, click on the View menu and choose Print Layout.
singular heading even if you have many acknowledgments. --Second, place your cursor in the first paragraph. Go to
Avoid expressions such as “One of us (S.B.A.) would like to the Format menu, choose Columns, choose one column
thank ... .” Instead, write “F. A. Author thanks ... .” In most Layout, and choose “apply to whole document” from the
cases, sponsor and financial support acknowledgments are dropdown menu.
placed in the unnumbered footnote on the first page, not here. --Third, click and drag the right margin bar to just over 4
inches in width.
REFERENCES AND FOOTNOTES The graphics will stay in the “second” column, but you can
drag them to the first column. Make the graphic wider to push
A. References out any text that may try to fill in next to the graphic.
References need not be cited in text. When they are, number
B. Final Stage Using Word 6.0
citations on the line, in square brackets inside the punctuation.
Multiple references are each numbered with separate brackets. When you submit your final version (after your paper has
When citing a section in a book, please give the relevant page been accepted), print it in two-column format, including
numbers. In text, refer simply to the reference number. Do not figures and tables. You must also send your final manuscript
use “Ref.” or “reference” except at the beginning of a on a disk, via e-mail, or through a Web manuscript submission
sentence: “Reference [3] shows ... .” Please do not use system as directed by the society contact. You may use Zip for
automatic endnotes in Word, rather, type the reference list at large files, or compress files using Compress, Pkzip, Stuffit, or
the end of the paper using the “References” style. Gzip.
Reference numbers are set flush left and form a column of Also, send a sheet of paper or PDF with complete contact
their own, hanging out beyond the body of the reference. The information for all authors. Include full mailing addresses,
reference numbers are on the line, enclosed in square brackets. telephone numbers, fax numbers, and e-mail addresses. This
In all references, the given name of the author or editor is 1
It is recommended that footnotes be avoided (except for the unnumbered
abbreviated to the initial only and precedes the last name. Use footnote with the receipt date on the first page). Instead, try to integrate the
footnote information into the text.
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 6
papers submitted for publication must provide sufficient [16] J. Jones. (1991, May 10). Networks. (2nd ed.) [Online]. Available:
http://www.atm.com
information to allow readers to perform similar
experiments or calculations and use the reported results. Basic format for journals (when available online):
Although not everything need be disclosed, a paper must [17] Author. (year, month). Title. Journal. [Type of medium]. volume (issue),
contain new, useable, and fully described information. For pages. Available: site/path/file
example, a specimen’s chemical composition need not be Example:
[18] R. J. Vidmar. (1992, Aug.). On the use of atmospheric plasmas as
reported if the main purpose of a paper is to introduce a electromagnetic reflectors. IEEE Trans. Plasma Sci. [Online].
new measurement technique. Authors should expect to be 21(3), pp. 876–880. Available:
challenged by reviewers if the results are not supported by http://www.halcyon.com/pub/journals/21ps03-vidmar
adequate data and critical details.
5) Papers that describe ongoing work or announce the latest Basic format for papers presented at conferences (when
technical achievement, which are suitable for presentation available online):
[19] Author. (year, month). Title. Presented at Conference title. [Type of
at a professional conference, may not be appropriate for Medium]. Available: site/path/file
publication. Example:
[20] PROCESS Corp., MA. Intranets: Internet technologies deployed
behind the firewall for corporate productivity. Presented at
INET96 Annual Meeting. [Online]. Available:
REFERENCES http://home.process.com/Intranets/wp2.htp
Basic format for books:
[1] J. K. Author, “Title of chapter in the book,” in Title of His Published Basic format for reports and handbooks (when available
Book, xth ed. City of Publisher, Country if not online):
[2] USA: Abbrev. of Publisher, year, ch. x, sec. x, pp. xxx–xxx. [21] Author. (year, month). Title. Comp an y . C ity, State or
Examples: Country. [Type of Medium].Available: site/path/file
[3] G. O. Young, “Synthetic structure of industrial plastics,” in Plastics, Example:
2nd ed., vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, [22] S. L. Tall een. (1 996 , Ap r . ). Th e In t r an et Archi -
pp. 15–64. te c tu r e : M a n a g i n g i n f o r m a t i o n i n t h e n e w paradigm.
[4] W.-K. Chen, Linear Networks and Systems. Belmont, CA: Amdahl Corp., CA. [Online]. Available:
Wadsworth, 1993, pp. 123–135. http://www.amdahl.com/doc/products/bsg/intra/infra/html
Basic format for periodicals: Basic format for computer programs and electronic documents
[5] J. K. Author, “Name of paper,” Abbrev. Title of Periodical, vol. x, no. x, (when available online): ISO recommends that capitalization
pp. xxx-xxx, Abbrev. Month, year. follow the accepted practice for the language or script in
Examples: which the information is given.
[6] J. U. Duncombe, “Infrared navigation—Part I: An assessment
of feasibility,” IEEE Trans. Electron Devices, vol. ED-11, no. 1, pp. 34–
Example:
39, Jan. 1959. [23] A. Harriman. (1993, June). Compendium of genealogical
[7] E. P. Wigner, “Theory of traveling-wave optical laser,” Phys. Rev., software. Humanist. [Online]. Available e-mail:
vol. 134, pp. A635–A646, Dec. 1965. HUMANIST@NYVM.ORG Message: get GENEALOGY REPORT
[8] E. H. Miller, “A note on reflector arrays,” IEEE Trans. Antennas
Propagat., to be published. Basic format for patents (when available online):
[24] Name of the invention, by inventor’s name. (year, month day). Patent
Number [Type of medium]. Available: site/path/file
Basic format for reports:
[9] J. K. Author, “Title of report,” Abbrev. Name of Co., City of Co.,
Example:
Abbrev. State, Rep. xxx, year. [25] Musical toothbrush with adjustable neck and mirror, by L.M.R. Brooks.
(1992, May 19). Patent D 326 189
Examples: [Online]. Available: NEXIS Library: LEXPAT File: DESIGN
[10] E. E. Reber, R. L. Michell, and C. J. Carter, “Oxygen absorption in the
earth’s atmosphere,” Aerospace Corp., Los Angeles, CA, Tech. Rep.
TR-0200 (4230-46)-3, Nov. 1988. Basic format for conference proceedings (published):
[11] J. H. Davis and J. R. Cogdell, “Calibration program for the 16-foot [26] J. K. Author, “Title of paper,” in Abbreviated Name of Conf., City of
antenna,” Elect. Eng. Res. Lab., Univ. Texas, Austin, Tech. Memo. Conf., Abbrev. State (if given), year, pp. xxxxxx.
NGL-006-69-3, Nov. 15, 1987. Example:
[27] D. B. Payne and J. R. Stern, “Wavelength-switched pas- sively coupled
Basic format for handbooks: single-mode optical network,” in Proc. IOOC-ECOC, 1985,
[12] Name of Manual/Handbook, x ed., Abbrev. Name of Co., City of Co., pp. 585–590.
Abbrev. State, year, pp. xxx-xxx. Example for papers presented at conferences (unpublished):
Examples: [28] D. Ebehard and E. Voges, “Digital single sideband detection for
[13] Transmission Systems for Communications, 3rd ed., Western Electric interferometric sensors,” presented at the 2nd Int. Conf. Optical Fiber
Co., Winston-Salem, NC, 1985, pp. 44–60. Sensors, Stuttgart, Germany, Jan. 2-5, 1984.
[14] Motorola Semiconductor Data Manual, Motorola Semiconductor
Products Inc., Phoenix, AZ, 1989. Basic format for patents:
[29] J. K. Author, “Title of patent,” U.S. Patent x xxx xxx, Abbrev. Month,
day, year.
Basic format for books (when available online): Example:
[15] Author. (year, month day). Title. (edition) [Type of medium]. [30] G. Brandli and M. Dick, “Alternating current fed power supply,”
volume (issue). Available: site/path/file U.S. Patent 4 084 217, Nov. 4, 1978.
Example:
Basic format for theses (M.S.) and dissertations (Ph.D.):
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 8
Primero A. autor, Fellow, IEEE, autor B. segunda y tercera C. autor, Jr., miembro, IEEE
T desactivada).
IEEE hará el formato final de su artículo. Si el papel está
destinado a una conferencia, por favor observe los límites de
SU documento es una plantilla para Microsoft Word versiones
6.0 o posteriores. Si estás leyendo un papel o una versión PDF página de la Conferencia.
de este documento, por favor descargue el archivo electrónico, A. A. Abreviaturas y acrónimos
TRANS-JOUR. DOC, desde el sitio Web de IEEE en
Definir abreviaturas y acrónimos la primera vez que se
http://www.ieee.org/web/publications/authors/transjnl/index.html por
utilizan en el texto, incluso después de que ya se han definido
lo que se puede utilizar para preparar su manuscrito. Si usted
en abstracto. Abreviaturas tales como IEEE, SI, CA y CC no
prefiere usar látex, descargar estilo de látex del IEEE y
debe ser definido. Abreviaturas que incorporan períodos no
archivos de muestra de la misma página Web. Utilice estos
deben tener espacios: escribir "C.N.R.S.," no "C. N. R. S." No
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 10
conversión a un archivo PS, EPS, TIFF, PDF o PNG: generalmente con pantalla gráfica, mientras que CMYK
Microsoft Word, Microsoft PowerPoint o Microsoft Excel. se utiliza en impresión.
Aunque no es obligatorio, se recomienda que estos archivos se Todas las figuras de color se deben generar en el
guardan en formato PDF en lugar de DOC, XLS o nuevos espacio de color RGB o CMYK. Imágenes en escala de
hacerlo protegerá tus figuras de fuente común y problemas de
grises deben presentarse en el espacio de color de escala
movimiento de flecha que se producen cuando se trabaja en
los archivos a través de múltiples plataformas. Al presentar su de grises. Arte de línea puede ser proporcionada en
tesina, los gráficos deberían todos presentarse individualmente escala de grises OR espacio de color de mapa de bits.
en uno de estos formatos junto con el manuscrito. Tenga en cuenta que el "espacio de color de mapa de
bits" y "formato de archivo de mapa de bits" no son la
D. D. Tamaño de los gráficos
misma cosa. Cuando el espacio de color de mapa de bits
La mayoría gráficos, gráficos y tablas son una columna está seleccionado. TIF /. TIFF es el formato
ancha (3,5 pulgadas/88 milímetros / 21 picas) o amplia recomendado.
(7,16 pulgadas/181 milímetros / 43 picas). La
profundidad máxima que puede ser un gráfico es 8,5
H. H. Acepta fuentes dentro de figuras
pulgadas (216 milímetros / 54 picas). Al elegir la
profundidad de un gráfico, deje espacio para un título. Cuando prepara sus gráficos IEEE sugiere que utilice
Figuras pueden ser de un tamaño entre anchos de una de las siguientes fuentes de tipo abierto: Times New
columna y página si el autor elige, sin embargo se Roman, Helvetica, Arial, Cambria y símbolo. Si se
recomienda que la cifras no son tamaño de menos que el suministran archivos EPS, PS o PDF todas las fuentes
ancho de columna a menos que cuando sea necesario. deben estar empotradas. Algunas fuentes pueden ser
Actualmente es una publicación con las mediciones de nativos de su sistema operativo; sin las fuentes
columna que no coinciden con los mencionados. incrustadas, partes de la gráfica pueden ser distorsionada
PROCEDIMIENTOS DEL IEEE tiene una medida de la o falta.
columna de 3,25 pulgadas (82,5 mm / 19.5 picas). Una opción segura al finalizar sus figuras es la tira hacia
fuera las fuentes antes de guardar los archivos, crear tipo
El tamaño final de impresión de fotografías de autor es
"contorno". Esto convierte a fuentes de arte lo que aparecerá
exactamente uniformemente en cualquier pantalla.
ancho por 1,25 pulgadas de altura de 1 pulgada (25,4
milímetros x 31,75 milímetros / 6 picas x 7,5 picas).
Fotos de autor impresos en editoriales medir 1,59 I. I. Utilizando etiquetas en figuras
pulgadas de ancho por 2 pulgadas de alto (40 milímetros 1) 1) Etiquetas del eje figura
x 50 milímetros / 9.5 picas picas x 12). Rótulos del eje de figura a menudo son una fuente de
confusión. Usar palabras en lugar de símbolos. Por ejemplo,
E. E. Resolución escriba la cantidad de "Magnetización" o "Magnetización M,"
La resolución adecuada de sus figuras dependerá del no sólo "M". Poner las unidades entre paréntesis. No rotular
tipo de figura es tal como se define en la sección "Tipos los ejes sólo con unidades. Como en la figura 1, por ejemplo,
de figuras". Autor de fotografías, color y figuras en escriba "magnetización (A / m)" o "magnetización (A m 1
escala de grises deben ser al menos 300dpi. Lineart, ),"no sólo" A / m. " No rotular los ejes con una relación de
incluidas las tablas deben ser un mínimo de 600dpi. cantidades y unidades. Por ejemplo, escribir "temperatura
(K)," no "temperatura/K."
F. F EL. Vector Art Multiplicadores pueden ser especialmente confusos. Escriba
Mientras que IEEE acepta y recomienda incluso que "Magnetización (kA/m)" o "magnetización (10 3 / m)." No
autores presentar ilustraciones en formato vectorial, es escriba "magnetización (A / m) 1000" porque el lector no
nuestra política para rasterizar todas las figuras para su sabría si la etiqueta de eje superior en la figura 1 significa
publicación. Esto se hace con el fin de preservar la 16000 A / m o 0,016 A/m. figura etiquetas debe ser legibles,
aproximadamente 8 a 10 punto tipo.
integridad de las figuras en múltiples plataformas de
ordenador. 2) 2) Subfigura etiquetas en materiales de varias figuras y
tablas
G. G. Espacio de color Figuras multipartes deben ser combinados y etiquetados
antes de su presentación final. Las etiquetas deben aparecer
El término espacio de color se refiere a la suma total centradas debajo de cada subfigura en fuente Times New
de colores que pueden representarse en el dicho medio. Roman de 8 puntos en el formato de (a) (b) (c).
Para nuestros propósitos, los tres espacios de color
principal son en escala de grises, RGB (rojo/verde/azul) J. J. Nombre de archivo
y CMYK (cian/magenta/amarillo/negro). RGB se utiliza Figuras (línea ilustraciones o fotografías) deben ser
nombrados a partir de las 5 primeras letras del apellido
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 13
del autor. El siguiente caracteres en el nombre del figura y tablas pueden colocarse al final de su artículo.
archivo deben ser el número que representa la ubicación Además, o incluso en lugar de presentar figuras dentro de su
secuencial de esta imagen en tu artículo. Por ejemplo, en manuscrito final, las figuras deberán ser presentados
el papel de autor "Anderson", las tres primeras cifras individualmente, separado del manuscrito de uno de los
formatos de archivo enumerados en la sección VI-J. Pies de
llamadas ander1.tif, ander2.tif y ander3.ps.
figura lugar debajo de las cifras; colocar títulos de la tabla por
Tablas deben contener solamente el cuerpo de la tabla encima de las tablas. Por favor no incluir subtítulos como
(no el título) y deben ser nombradas de manera similar a parte de las figuras, o ponerlos en "cuadros de texto" ligados a
las figuras, salvo que '.t' es insertado entre el nombre del las figuras. No coloque las fronteras alrededor de sus figuras.
autor y el número de la tabla. Por ejemplo, en primer
lugar tres mesas del autor Anderson sería nombrados el
N. N. Procesamiento de color / impresión en revistas
ander.t1.tif, ander.t2.ps, ander.t3.eps.
Fotografías de autor deben ser nombrados usando los de la IEEE
cinco primeros caracteres del apellido del autor en la Todas las transacciones de IEEE, revistas y cartas permite
foto. Por ejemplo, cuatro autor fotografías para un libro un autor publicar figuras de color en IEEE Xplore®
gratuitamente y automáticamente convertirlas a escala de
puede ser nombrado: oppen.ps, moshc.tif, chen.eps y
grises para la versión impresa. En la mayoría de revistas,
duran.pdf.
figuras y tablas pueden también imprimir en color si un
Si dos autores o más tengan el mismo nombre pasado, su
autor decide hacerlo. Tenga en cuenta que este servicio
primera inicial (es) puede ser sustituido por la quinta,
cuarta, tercera... Letras de su apellido hasta el grado viene en un gasto extra para el autor. Si va a imprimir
gráficos de color, incluir una nota con su final de papel
donde hay diferenciación. Por ejemplo, dos autores fotos
de Michael y de Monica Oppenheimer sería nombrados indicando que figuras o tablas que desea ser manejado de
oppmi.tif y oppmo.eps. esa manera y diciendo que estás dispuesto a pagar el
suplemento.
[3] muestra...". Por favor no utilizar notas automáticas en su manuscrito final en disco, correo electrónico o a través de
Word, más bien, escriba la lista de referencias al final del un sistema de envío de manuscrito de Web como se indica por
documento utilizando el estilo de "Referencias". el contacto de la sociedad. Puede usar Zip para archivos de
Números de referencia se establecen al ras izquierda y grandes tamaño, o comprimir archivos mediante compresa,
forman una columna de su propia, salir más allá del cuerpo de Pkzip, Stuffit, o Gzip.
la referencia. Los números de referencia están en la línea, También, enviar una hoja de papel o en PDF con
encerrada en corchetes. En todas las referencias, el nombre del información completa de contacto para todos los autores.
autor o editor se abrevia a la inicial solamente y precede a los Incluyen direcciones de correo electrónico completos,
apellidos. Uso de todos; Utilice et al. sólo si no se dan números telefónicos, números de fax y direcciones de correo
nombres. Utilice comas alrededor de Jr., Sr. y III en los electrónico. Esta información se utilizará para enviar a cada
nombres. Abreviar los títulos de la Conferencia. Cuando autor una copia de la revista en la que aparece el documento.
citando a IEEE transactions, proporcionar el número, intervalo Además, designar a un autor como el "autor." Este es el autor
de páginas, número de volumen, año o mes si está disponible. a quien se enviarán las pruebas del papel. Las pruebas se
Al hacer referencia a una patente, proporcionan el día y el mes envían al autor correspondiente sólo.
del tema o aplicación. Referencias podrán no incluir toda la
C. C. Fase de revisión con manuscritos de ScholarOne®
información; por favor obtener e incluya la información
pertinente. No combine referencias. Debe haber una única Contribuciones a la transacciones, revistas y cartas
referencia con cada número. Si hay un enlace incluido en la pueden ser presentadas electrónicamente en presentación de
referencia de la impresión, se incluyen al final de la referencia. manuscrito en línea de IEEE y sistema de revisión por pares,
manuscritos de ScholarOne® . Usted puede obtener un listado
Que no sean libros, capitalizar solamente la primera palabra
de las publicaciones que participan en ScholarOne en
en un título de papel, excepto nombres propios y símbolos del
http://www.ieee.org/publications_standards/publications/autho
elemento. Para artículos publicados en revistas de traducción, rs/authors_submission.html Compruebe primero si usted tiene
por favor dar la cita en inglés en primer lugar, seguido de la una cuenta existente. Si no hay ninguno, por favor crea una
mención de lengua extranjera original ver el final de este nueva cuenta. Después de iniciar sesión, el centro de su autor
documento para formatos y ejemplos de referencias comunes. y haga clic en 'Enviar el primer borrador de un manuscrito
Para una discusión completa de referencias y de sus formatos, nuevo.'
vea "El IEEE Manual de estilo," como un enlace PDF de la Junto con otra información, se le pedirá que seleccione al
Página principal de Herramientas digitales de autor . tema de una lista desplegable. Según el diario, hay varios
pasos para el proceso de envío; debe completar todos los pasos
C. A. Notas al pie
para una presentación completa. Al final de cada paso debe
Número de notas por separado en superíndices (insertar | hacer clic en "Guardar y continuar"; sólo cargar el papel no es
Nota al pie). [1] colocar la nota real en la parte inferior de la suficiente. Después el último paso, verá una confirmación de
columna en la que se cita; No ponga las notas en la lista de que la presentación es completa. También recibirá una
referencias (Notas finales). Usar letras para las notas de la confirmación por correo electrónico. Para consultas sobre la
tabla (ver tabla I). presentación de su libro sobre manuscritos de ScholarOne, por
favor póngase en contacto con oprs-support@ieee.org o +1
732 465 5861.
XVIII. VIII. ENVIAR SU ARTÍCULO DE REVISIÓN Manuscritos de ScholarOne aceptará archivos de revisión
en varios formatos. Consulte las directrices de la revista
A. A. Fase de revisión con Word 6.0 o superior específica que va a presentar.
Si desea enviar el archivo con una columna de manera Se le pedirá que presente un formulario de derechos de
electrónica, por favor haga lo siguiente: autor electrónico inmediatamente después de completar el
--En primer lugar, haga clic en el menú Ver y elegir el proceso de envío (los autores son responsables de obtener
diseño de impresión. cualquier distancias de seguridad). Presentar los derechos de
--En segundo lugar, coloque el cursor en el primer párrafo. autor electrónicos podría resultar en retrasos de publicación
Ir al menú formato, elija columnas, elegir el diseño de una más tarde. También tendrás la oportunidad de designar su
columna y elija "aplicar a todo el documento" en el menú artículo como "acceso abierto" Si usted se compromete a
desplegable. pagar la cuota de acceso abierto del IEEE.
--En tercer lugar, haga clic y arrastre la barra de la margen
derecha a poco más de 4 pulgadas de ancho. D. D. Etapa final ScholarOne manuscritos de uso
Los gráficos se mantendrá en la "segunda" columna, pero
Tras la aceptación, recibirá un correo electrónico con las
puede arrastrarlos a la primera columna. Hacer el gráfico para instrucciones específicas con respecto a la presentación de los
expulsar cualquier texto que intente rellenar junto al gráfico. archivos finales. Para evitar cualquier demora en la
B. B. Etapa final con Word 6.0 publicación, por favor asegúrese de seguir estas instrucciones.
Más revistas requieren cargar presentaciones finales a través
Cuando usted envía su versión final (después de que su
de manuscritos de ScholarOne, aunque algunos todavía
trabajo ha sido aceptado), imprimir en formato de dos
pueden aceptar finales comunicaciones por correo electrónico.
columnas, incluyendo figuras y tablas. También debe enviar
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 15
Presentaciones finales deben incluir archivos de código fuente XX. X. PRINCIPIOS DE PUBLICACIÓN
de su manuscrito aceptado, archivos gráficos de alta calidad y Los dos tipos de contenidos que se publican son; 1) revisada
un archivo con formato pdf. Si usted tiene alguna pregunta y 2) archivo. El Departamento de revistas y transacciones
relacionada con el proceso de presentación final, póngase en
publica artículos académicos de valor archivístico como
contacto con el contacto administrativo para el diario.
tutoriales exposiciones y revisiones críticas de temas clásicos
Además de esto, subir un archivo con información
y temas de interés actual.
completa de contacto para todos los autores. Incluyen
direcciones de correo electrónico completos, números Autores deben considerar los siguientes puntos:
telefónicos, números de fax y direcciones de correo 1) Documentos técnicos presentados para publicación debe
electrónico. Señala al autor que presentó el manuscrito en avanzar el estado del conocimiento y debe citar el trabajo
ScholarOne manuscritos como el "autor." Este es el único previo pertinente.
autor a quien se enviarán las pruebas del papel. 2) La longitud de una ponencia presentada debe ser acorde con
la importancia o apropiado a la complejidad de la obra.
Por ejemplo, una extensión evidente del trabajo
previamente publicado no son adecuada para su
publicación o podrían tratar adecuadamente en unas pocas
E. E. Forma de derechos de autor páginas.
Una forma de derechos de autor de IEEE debe acompañar 3) Autores deben convencer a revisores y los editores del
su presentación final. Puede obtener una versión de .pdf, .html mérito científico y técnico de un libro, las normas de la
o .doc en http://www.ieee.org/copyright. Autores son prueba son mayores cuando se reportan resultados
responsables de obtener cualquier distancias de seguridad. extraordinarios o imprevistos.
4) Porque la reproducción es necesaria para el avance
XIX. IX. POLÍTICA EDITORIAL científico, los trabajos sometidos para publicación deben
No es necesario para la participación en una conferencia de proporcionar suficiente información para permitir a los
presentación de un manuscrito. No presente una versión lectores a realizar cálculos o experimentos similares y
adaptacion de un libro han enviado o publicado en otros utilizar los resultados divulgados. Aunque no todo
lugares. No publicar datos "preliminares" o resultados. El necesita ser revelada, un documento debe contener
autor de presentación es responsable de obtener el acuerdo de información nueva, útil y totalmente descrita. Por
todos los coautores y cualquier consentimiento requerido de ejemplo, la composición química de una muestra no
los patrocinadores antes de presentar un documento. El necesita ser informado si el propósito principal de un
Departamento de revistas y transacciones de IEEE no documento es introducir una nueva técnica de medición.
recomienda autoría cortesía. Es obligación de los autores citan Autores deben esperar a ser desafiado por los revisores, si
trabajos previos relevantes. los resultados no son apoyados por datos adecuados y
Departamento de revistas y el IEEE transacciones no detalles críticos.
publica procedimientos o expedientes de la Conferencia. El 5) Documentos que describen trabajos en curso o anuncian el
Departamento de publicar artículos relacionados con último logro técnico, que son convenientes para su
conferencias que se han recomendado para la publicación en presentación en una conferencia profesional, puede no ser
base a la revisión por pares. Como una cuestión de comodidad apropiado para su publicación.
y servicio a la comunidad técnica, estos documentos tópicos
son típicamente recogidos y publicados en una edición
especial de la mayoría las operaciones publicaciones. REFERENCIAS
Al menos dos comentarios son necesarios para cada Formato básico para libros:
documento presentado. Para documentos relacionados con la [44] [1] J. K. Author, «Título del capítulo en el libro,» en título de su libro
Conferencia, la decisión de aceptar o rechazar un documento publicado, xth ed. ciudad de la editorial, país, si no
[45] [2] USA: abreviatura. de la editorial, año, CH. x seg. x pp. xxx – xxx.
es hecha por el Comité de editores y publicaciones de Ejemplos:
conferencia; las recomendaciones de los árbitros sólo son [46] [3] G. O. Young, "Synthetic structsue de industral plastics," en Pl por
consultivas. Inglés indescifrable es una razón válida para el palillos, 2nd ed., vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964,
rechazo. Hay un servicio que te ayudarán a mejorar tu inglés pp. de5– 6 14.
[47] [4] W . - K . Chen, Linear red unad Systems. B el m ont, CA:
para un honorario, y el enlace a este servicio se puede Wunddel EEUUsworth, 1993, pp. 12 3 – 1 3 5.
encontrar en
http://www.ieee.org/web/publications/authors/transjnl/index.html. Formato básico para revistas:
Autores de documentos rechazados pueden revisar y les [48] [5] Autor de J. K., "Nombre del papel," abreviatura. Título de periódico,
vuelva a enviar como documentos regulares, con lo cual se vol. x, núm. x, PP . xxx-xxx, Abreviatura de . Mes, año.
revisará por dos nuevos árbitros. Ejemplos:
[49] [6] J. U. Duncombe, "navegación infrarroja: parte I: una evaluación
de factibilidad," Dispositivos de electrónicos IEEE trans., vol. ED-11,
núm. 1, pp. 34-39, enero de 1959.
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 16
[50] [7] E. P. Wigner, "Teoría del láser óptico de onda viajando," Phys [66] [23] A . Hunrriman. ()1993, June). Compendum f o genealogical
Rev., softwunre. Humanist. [En línea]. Disponible e -mail:
Vol. 134, pp. A635-A646, diciembre de 1965. HUMANesTaNYVM. ORG Messunge: get GENEALOGY Informe
[51] [8] E. H. Miller, "Una nota sobre matrices de reflector," IEEE trans. [67]
antenas de Propagat., que se publicará. Formato básico para las patentes (cuando esté disponible en
línea):
Formato básico para informes: [68] [24] Nombre de la invención, por el nombre del inventor. (año, mes día).
[52] [9] J. K. Author, "Título del informe," abreviatura. Nombre de la ciudad Número de patente [tipo de medio]. Disponible: archivo de ruta de
de Co., Co., abreviatura. Estado, el representante xxx, año. acceso de sitio
Ejemplos: Ejemplo:
[53] [10] E. E. Reber, R. L. Michell y C. J. Carter, "Absorción de oxígeno en [69] [25] Musical cepillo con cuello ajustable y espejo, de L.M.R. Brooks.
la atmósfera terrestre," Aerospace Corp., Los Angeles, CA, el (1992, 19 de mayo). D patente 326 189
representante técnico TR-0200-3 (4230-46), noviembre de 1988. [70] [En línea]. Disponible: NEXIS biblioteca: LEXPAT archivo:
[54] [11] J. H. Davis y J. R. Cogdell, "Programa de calibración para la antena diseño
de 16 pies," elegir. Ing. laboratorio res., Univ. de Texas, Austin, Memo
de la tecnología. NGL-006-69-3, 15 de noviembre de 1987.
Formato básico para conferirence proceedngs (publicado):
[71] [26] J. K. Author, "Título del documento," en Nombre abreviado de
Formato básico para manuales: conf. , Ciudad de conf., abreviatura. Estado (si), año, pp. xxxxxx.
[55] [12] Nombre de manual de Manual de , x ed., abreviatura. Nombre de la Ejemplo:
ciudad de Co., Co., abreviatura. Estado, año, pp. xxx-xxx. [72] [27] D. B. PAyne unnd J. R. Stern, "Wvelendth-swched pas svamente
Ejemplos: coupl a d sengle -mode óptica netawork, « en Proc. IOOC-ECOC, 1985,
[56] [13] Sistemas de transmisión para las comunicaciones , 3ro ed., Western pp. 585-590.
Electric Co., Winston-Salem, Carolina del norte, 1985, pp. 44-60. Ejemplo paraunapers p presented a conferences
[57] [14] Manual de datos de semiconductores de Motorola , Motorola
()unpublished):
Semiconductor Products Inc., Phoenix, AZ, 1989.
[73] [28] D. Ebeha dr unad E. Vyer, "Digital solo ladoBunad detectien for
nterferometrc sensors," presented en the 2 nt. Conf. Optical Fiber
Formato básico para libros (cuando esté disponible en línea): Sensors, Stuttgtr, Germany, de Jan. 2- 198 5,4.
[58] [15] author. (yoído, menth ay d). Title. (edition) [Type de medium].
volumen (tema). Available: sitio /pen el archivo deh Formato básico para p un te n TS:
Ejemplo: [74] [29] J. K. Author, "Título de la patente," los E.E.U.U. patente x xxx xxx,
[59] [16] J J.enes. (1991, 1 de mayo0). Networks. () 2ª ed.) [Online]. abreviatura. Mes, día, año.
Disponible: http: //www.atmcom Ejemplo:
[75] [30] G. randli By M. Dick, "Alter arn currente alimentado potencia
Formato básico para journaunls (cuando esté disponible supply,"
en línea): U. S. Patent 4 084 217, Nov. 4, 1978.
[60] [17] Unuthor. (año, math). Título. J ournal. [Type de medium]. volumen
(tema), punges. Available: sitio /pen el archivo deh Formato básico Tesis (M.S.) y tesis doctorales (pH.d.):
Ejemplo: [76] [31] J. K. Author, "Título de la tesis," tesis de M.S., abreviatura. Dpto.,
[61] [18] J. r. Vidmar. (1992, g de Au.). En the uso de enmospheric plasmas abreviatura. Univ., ciudad de la Univ., abreviatura. Estado, año.
s electromagnetic reflectérminos de referencia. IEEE [77] [32] J. K. Author, "Título de la tesis doctoral," tesis doctoral,
transporte. Plasmuna SCI. [Online]. 21()(3) pp. 876 –880. Unvailable: abreviatura. Dpto., abreviatura. Univ., ciudad de la Univ., abreviatura.
http://www.halcyon. car de lamom/pub/journals/21 ps03-vid Estado, año.
Ejemplos:
[78] [33] J. O. Williams, "analizador de banda estrecha", tesis de doctorado,
Formato básico paraunapers p presented a conferences Dpto. elegir. Ing., Universidad de Harvard, Cambridge, MA, 1993.
(cuando esté disponible en línea): [79] [34] Kawasaki N., "Estudio paramétrico de flujo de la boquilla del no
[62] [19] A u thor. ()yoreja, math). Título. Pre s ented unat e Conference equilibrio térmico y químico," tesis de M.S., Dpto. electrónica. Ing.,
title. [Type of deu Medim]. Un sitiovailable: /pen el archivo deh/ Universidad de Osaka, Osaka, Japón, 1993.
Ejemplo:
[63] [20] PROCESS Corp., MA. entranets: Internet tecnologíaogies deployed Formato básico de los tipos más comunes de referencias no
behnd the frewunll de corpounate productivy. D de la presente t publicadas:
INET96 Annual png. [En línea]. Available: http: //home.p.rocess. [80] [35] J. K. Author, comunicación privada, abreviatura. Mes, año.
com/Int anets der/wp2.htp [81] [36] J. K. Author, "Título de la ponencia," inédito.
[82] [37] J. K. Author, "Título de la ponencia," que se publicará.
Formato básico para reports y handbooks (cuando esté Ejemplos:
disponible en línea): [83] [38] A. Harrison, comunicación privada, mayo de 1995.
[64] [21] autho. (año, math). Título. Compn y. Cdad, State or ContRy. [84] [39] B. Smith, "Una aproximación a los gráficos de formas lineales,"
[Type f o Medium]. Un sitiovailable: /pen el archivo deh/ inédito.
Ejemplo: [85] [40] A. Brahms, "Error de representación para los números verdaderos
[65] [22] S . L . l T a l e e n . ( 1 9 9 6 , A p r . ) . T h e n t r n e t A r c h i -tC E tu r e : en la aritmética binaria de la computadora," IEEE Computer grupo
M un n a g g n n f o r m t me n o me n t h e e n w parundigm. Amdahl Corp., repositorio, papel R-67-85.
CA. [Onlne]. Disponle: http: //www.amdun
chl.com/hacer/products/bsg/ntra / infra /html Formato básico de las normas:
[86] [41] Título de la norma , Norma, fecha de.
Basic format for computer programs and electronic documents Ejemplos:
(when available online): ISO recommends that capitalization [87] [42] Criterios de IEEE para sistemas eléctricos de IE , Estándar de IEEE
follow the accepted practice for the language or script in 308, 1969.
which the information is given. [88] [43] Letra de símbolos para las cantidades , ANSI estándar Y10.5-1968.
Ejemplo:
> REPLACE THIS LINE WITH YOUR PAPER IDENTIFICATION NUMBER (DOUBLE-CLICK HERE TO EDIT) < 17