Sei sulla pagina 1di 71

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Contacte con SAMSUNG WORLD WIDE


Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.

Country Customer Care Center  Web Site

Plasma TV
ARGENTINA 0800-333-3733 www.samsung.com
0800-124-421
BRAZIL www.samsung.com
4004-0000
CHILE 800-SAMSUNG(726-7864) www.samsung.com
COLOMBIA 01-8000112112 www.samsung.com
COSTA RICA
DOMINICA
0-800-507-7267
1-800-751-2676
www.samsung.com
www.samsung.com User Manual
ECUADOR 1-800-10-7267 www.samsung.com
EL SALVADOR 800-6225 www.samsung.com
GUATEMALA 1-800-299-0013 www.samsung.com
HONDURAS 800-7919267 www.samsung.com
JAMAICA 1-800-234-7267 www.samsung.com
NICARAGUA 00-1800-5077267 www.samsung.com
PANAMA 800-7267 www.samsung.com
PERU 0-800-777-08 www.samsung.com
PUERTO RICO 1-800-682-3180 www.samsung.com
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com
VENEZUELA 0-800-100-5303 www.samsung.com

Thank you for purchasing this Samsung product.


To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________

© 2012 Samsung Electronics Co., Ltd. All rights reserved. BN68-04363C


BN68-04363C-00

[PE400-ZS]BN68-04363C.indb 1 2012-03-27 �� 4:24:42

Downloaded from www.Manualslib.com manuals search engine


Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.

Important Warranty Information Regarding Television Format Viewing


• Screen Image retention
Do not display a still image (such as that from a video game) on the plasma display panel for more than a few minutes. Still images can cause screen
image retention (burn in). To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Heat on the top of the Plasma TV
The top side of the TV may become hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the TV.
This is normal and does not indicate any defect or operational failure of unit.
However, children should be prevented from touching the upper part of the TV.
• The TV is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the TV contracts or expands due to a change in the surrounding environment such as temperature or humidity.
This is normal and not a defect.
• Cell Defects
The PDP uses a panel consisting of 1,226,880(SD-level) to 6,221,000 (FHD-level) pixels which require sophisticated technology to produce.
However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
• Avoid operating the TV at temperatures below 41°F (5°C)
• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of the borders on the left, right, top, or bottom
of the screen. Playing a DVD or a game console may have a similar effect.
Damage caused by the above effect is not covered by the warranty.
• After-images on the Screen.
Displaying still images from Video games for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
• Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.

2 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 2
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:43
Contents
Getting Started Advanced Features
yy Accessories............................................................... 4 yy Media Play............................................................... 23
yy Securing the Installation Space.................................. 4 Using the Media Contents 23
yy Using the TV’s Controller (Panel Key).......................... 5 Connecting a USB Device 23
yy Remote Control Buttons............................................ 6 Screen Display 24
yy Connecting to an Antenna......................................... 7 Media Contents - Additional Functions 27
yy Setup (Initial Setup).................................................... 7
Other Information
Connections yy Installing the Wall Mount.......................................... 29
yy Connecting to an AV devices..................................... 9 yy Securing the TV to the Wall...................................... 30
yy Changing the Input Source...................................... 10 To avoid the TV from falling 30
yy Anti-theft Kensington Lock....................................... 30
yy Troubleshooting....................................................... 31
Basic Features
License 34
yy Channel Menu......................................................... 11 yy Storage and Maintenance........................................ 34
Using the INFO button (Now & Next guide) 11 yy Specifications.......................................................... 35
Using Channel menu 11 yy Index....................................................................... 36
Memorizing channels 13
Other Features 14
yy Picture Menu........................................................... 14
Changing the Preset Picture Mode 14
Adjusting Picture Settings 14
Changing the Picture Options 15
yy Sound Menu............................................................ 17
Changing the Preset Sound Mode 17
Sound Settings 17
Adjusting Sound Settings 17

Preference Features
yy System Menu........................................................... 18
Setting the Setup 18
Setting the Time 18
Using the Sleep Timer 18
Setting the On / Off Timer 18
Locking Programs 19
Economical Solutions 19
Other Features 20
yy Support Menu.......................................................... 22
Support Menu 22

Check the Symbol!

t O
This function can be used by pressing the Step by step guide :
NOTE
TOOLS button on the remote control. Informs you how to access the menu.

English 3

[PE400-ZS]BN68-04363C.indb
Downloaded from 3
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:43
Getting Started
Accessories
✎✎Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
✎✎The items’ colors and shapes may vary depending on the models.
✎✎Check that there are no accessories hidden behind packing materials when you open the box.
• Remote Control & Batteries (AAA x 2)
• Cleaning-Cloth
• Owner’s Instructions
• Power Cord
• Warranty Card / Safety Guide (Not available in some locations)

Input Cables (Sold Separately)

HDMI Component Composite (AV) Coaxial (RF)

Securing the Installation Space


Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.

4 inches 4 inches

4 inches 4 inches 4 inches 4 inches

4 inches

4 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 4
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:46
Using the TV’s Controller (Panel Key)
✎✎The product color and shape may vary depending on the model.

01 Getting Started
Function menu
CONTENT

m R s

Return

TV Controller

Remote control sensor

Power on Turns the TV on by pressing the controller in standby mode.

Adjusting the volume Adjusts the volume by moving the controller from side to side when the power is on.

Selecting a channel Selects a channel by moving the controller up and down when the power is on.

Press the controller when the power is on, then the function menu screen appears. If you press it
Using the function menu
again, the function menu screen disappears.

Selects the MENU(m) by moving the controller in the function menu screen. The OSD(On Screen
Selecting the MENU(m)
Display) of your TV’s feature appears.

Selects the CONTENT by moving the controller in the function menu screen. The Contents
Selecting the CONTENT
Home main screen appears.

Selects the Source(s) by moving the controller in the function menu screen. The Source list
Selecting the Source (s)
screen appears.

Selects the Power Off (P) to turn the TV off by moving the controller in the function menu
Power Off (P)
screen.

✎✎Exits the menu when pressing the controller more than 1 second.
✎✎When selecting the function by moving the controller to the up/down/left/ right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the up/down/left/right directions.

Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.

English 5

[PE400-ZS]BN68-04363C.indb
Downloaded from 5
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:46
Getting Started
Remote Control Buttons
✎✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired
persons.

Turns the TV on and off. Display and select the available video
sources.

Press to directly access to channels.

Press to select additional channels (digital) Return to the previous channel.


being broadcast by the same station. For
example, to select channel ‘54.3’, press ‘54’, Cut off the sound temporarily.
then press ‘-’ and ‘3’.

Adjusts the volume. Change channels.

Displays the channel list on the screen. Displays the main on-screen menu.
CONTENT GUIDE
View the Contents Home. Display the EPG (Electronic Program Guide).

Quickly select frequently used functions. Press to display information on the TV


screen.
Selects the on-screen menu items and
changes the values seen on the menu.

Return to the previous menu. Exit the menu.

Use these buttons according to the direction


MTS: Press to choose stereo, mono or on screen.
MTS
Separate Audio Program (SAP broadcast).
Use these buttons in a specific feature.
P.SIZE: Choose the picture size.
CC: Controls the caption decoder.

Installing batteries (Battery size: AAA)

✎✎NOTE
xxUse the remote control within 23 feet of the TV.
xxBright light may affect the performance of the remote control. Avoid
using when near special fluorescent lights or neon signs.
xxThe color and shape may vary depending on the model.

6 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 6
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:47
Connecting to an Antenna

01 Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎✎Connecting the power cord and antenna.
✎✎The PDP device may interfere with an amateur radio or AM radio.
✎✎When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the
TV to malfunction.
✎✎The position of power input port may differ depending on the model.

VHF/UHF Antenna
Antenna Cable (Not Supplied)

or Cable
ANT OUT

Power Input

Setup (Initial Setup)


When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button.
Setup is available only when the Source is set to TV.
✎✎To start the Setup, enter the password using the remote control. The default password is 0-0-0-0.
✎✎To return to the previous step, press the Previous button.
1. Menu Language: Selecting a menu language

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.

2. Use Mode: Selecting the usage mode

Press the ▲ or ▼ button, then press the ENTERE button.


• Select the Home Use mode. Store Demo Mode is for retail environments.
• When pressing TV controller, the function menu screen appears. Select the MENU(m) and press it more than 5 seconds
using the controller. The Store Demo mode is set. Cancel the Store Demo by selecting Source(s) and pressing it
more than 5 seconds.
• Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when
you watch at home.

English 7

[PE400-ZS]BN68-04363C.indb
Downloaded from 7
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:48
Getting Started
3. Auto Program (1): Selecting how you watch your TV

Let’s find and store channels on your TV. Do you need to search for channels?
• Yes, I need to.: Memorize all of the available channels using RF cable.
• No, I don’t need to.: Do not need Auto program when connecting a TV to set-top box.
✎✎You can complete Setup by selecting it.
4. Auto Program (2): Selecting and memorizing channels

Select the Next to run Auto Program.


Press the ▲ or ▼ button to select Air or Cable, and then press the ENTERE button.
The channel search will start automatically.
For more information, refer to Channel → Auto Program.
✎✎Press the ENTERE button at any time to interrupt the memorization process.
5. Clock: Setting the Clock Mode

Set the Clock Mode automatically or manually.


• Auto : Select the time zone where you live. (for Brazil, Chile, Ecuador)
• Manual : Allows you to manually set the current date and time.

6. Setup Complete

Press the ENTERE button.


✎✎The completed settings are displayed.

If You Want to Reset This Feature...

OO MENUm → System → Setup → ENTERE

8 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 8
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:48
Connections
Connecting to an AV devices

02 Connections
¦¦ Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box)
satellite receiver

Device

9$
HDMI Cable (Not Supplied)
HDMI OUT

Using an HDMI Cable


✎✎HDMI IN 1, 2
xxThe picture may not display normally (if at all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device
about the HDMI version and, if out of date, request an upgrade.
xxBe sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
xxA basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet
function via HDMI.

¦¦ Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Red White Yellow

Red White Red Blue Green

Component Cable Audio Cable Audio Cable Video Cable


(Not Supplied) (Not Supplied) (Not Supplied) (Not Supplied)

Device Device

Using a Component or an Audio/Video Cable


✎✎When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow).
✎✎For better picture quality, we recommend the Component connection over the A/V connection.

English 9

[PE400-ZS]BN68-04363C.indb
Downloaded from 9
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:50
Connections
✎✎NOTE
xxThe interlace mode is not supported.
xxThe set might operate abnormally if a non-standard video format is selected.
xxPC and PC/DVI AUDIO IN input are not supported.
xxDIGITAL AUDIO OUT(OPTICAL) is not supported.
SERVICE

Connector for service only.

Changing the Input Source

¦¦ Source
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected
to the TV.

1. Press the SOURCE button on your remote.


2. Select a desired external input source.
■■ TV / HDMI1 / HDMI2 / AV / Component
✎✎In the Source, connected inputs will be highlighted.
How to use Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
■■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV /
IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

Information
You can see detailed information about the connected external device.

10 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 10
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:51
Basic Features
Channel Menu Channel List
You can view channel information, Added Ch. or Favorites

03 Basic Features
¦¦ Using the INFO button (Now & Next guide) 1-5.
The display identifies the current channel and the status of ✎✎When you press the CH LIST button on the remote
certain audio-video settings. control, Channel List screen will be displayed at once.
The Now & Next guide shows daily TV program information ■■ Added Ch.: Shows all added channels.
for each channel according to the broadcasting time. ■■ Favorites 1-5: Show all favorite channels.
■■ Scroll ◄, ► to view information for a desired program ✎✎Favorites 1-5 will be displayed when you set Edit
while watching the current channel. Favorites.

¦¦ Using Channel menu ✎✎If you want to view favorites channels you added,
press the CH LIST button and use L (CH Mode)
button to move Favorites 1-5.
OOMENUm → Support → Contents Home → ENTERE
✎✎Using the function buttons with the Channel List.
Press the CONTENT button to select Contents Home, then
select the desired menu. Each screen will be displayed.
■■ T (Tools): Displays the option menu.
■■ L (CH Mode / Channel): Move to the Favorites 1-5
when Edit Favorites is set.
✎✎When you select the Program View in T (Tools)
menu, you can move to other channels using L
(Channel) button.
■■ E (Watch / Information): Watches the channel you
selected. / Displays details of the selected program.
Contents Home ■■ k (Page): Move to next or previous page.

How to use Schedule Viewing in Channel List

Channel List Guide Media Play Schedule Manager Source (digital channels only)
R Return When you set the Schedule Viewing in Channel List, you
can only set the program in Program View.
1. Press the CH LIST button, then select a desired digital
channel.
2. Press TOOLS button, and then select the Program
View. The program list for that channel appears.
3. Press the ▲ / ▼ buttons to select the desired program,
then press the ENTERE (Information) button.
4. Select Schedule Viewing, then press the ENTERE
button when done.
✎✎If you want to cancel Schedule Viewing, follow steps 1
through 3. Select Cancel schedule.

English 11

[PE400-ZS]BN68-04363C.indb
Downloaded from 11
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:52
Basic Features
Using Option Menu t Using Option Menu in Edit Mode t
Set each channel using the Channel List menu options Press the ◄/► button to select the channel mode
(Program View, Edit Favorites, Lock/Unlock, Channel (Added Ch. / All Channels / Favorites 1-5).
Name Edit, Delete, Information, Change Antenna, Edit • Added Ch.: Shows all added channels.
Mode). Option menu items may differ depending on the
• All Channels: Shows all currently available
channel status.
channels.
1. Select a channel and press the TOOLS button. • Favorites 1-5: Shows all favorite channels.
2. Select a function and change its settings. Favorites 1-5 will be displayed when you set Edit
■■ Program View: Displays the program when digital
Favorites.
channel is selected. Set each channel using the menu options (Edit
Favorites, Lock/Unlock, Add/Delete, Deselect, Select
■■ Edit Favorites t: Set channels you watch All). The option menu items that appear may differ
frequently as favorites. Add or delete the selected depending on the channel status and type.
channel in Favorites 1-5.
1. Press the TOOLS button in Channel List screen,
1. Select the Edit Favorites, then press the then select the Edit Mode. A check box appears to
ENTERE button. the left of the channel.
2. Press the ENTERE button to select Favorites 2. Press the ▲/▼ buttons to select the desired
1-5, then press the OK button. channel, then press the ENTERE button. The (c)
✎✎One favorite channel can be added in several mark indicates the channel you’ve selected.
of favorites among Favorites 1-5. ✎✎You can select more than one channel.
■■ Lock/Unlock: Lock a channel so that the channel ✎✎Press the ENTERE button again to deselect
cannot be selected and viewed. the channel.
✎✎This function is available only when the Channel 3. Press the TOOLS button, then select a function and
Lock is set to On. change its settings.
✎✎The PIN input screen appears. Enter your 4-digit • Edit Favorites: Set the selected channels you
PIN, the default of which is “0-0-0-0”. Change the watch frequently as favorites.
PIN using the Change PIN option. ✎✎ The Edit Favorites screen has five groups
■■ Channel Name Edit (analog channels only): Assign your (Favorites 1, Favorites 2, etc.). You can add
own channel name. a favorite channel to any one of the groups.
■■ Delete: Delete a channel from the channel list. Press the ▲/▼ buttons to select a group.
■■ Information: Displays details of the selected program. • Lock/Unlock: Lock a channel so that the channel
✎✎Press the Watch to switch the channel directly. cannot be selected and viewed.
✎✎ This function is available only when the
■■ Change Antenna: Switches to Air or Cable. Channel Lock is set to On.
■■ Edit Mode: You can select desired channels and edit it. ✎✎The PIN input screen appears. Enter your
For detailed information about using Edit Mode, refer to 4-digit PIN, the default of which is “0-0-0-0”.
“Using Option Menu in Edit Mode”. Change the PIN using the Change PIN option.
• Add/Delete: Delete or add a channel to display the
channels you want.
✎✎ The Add menu is only available in All
Channels.
✎✎The Add menu only appears for deleted
channels.
✎✎A gray-colored channel indicates the channel
has been deleted.
• Deselect: Deselect the selected channels.
• Select All: Select all the channels in the channel list.

12 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 12
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:53
Guide Schedule Manager
The EPG (Electronic Program Guide) information is provided

03 Basic Features
by broadcasters. Using program schedules provided by OOMENUm → Support → Contents Home → Schedule
broadcasters, you can specify programs you want to watch Manager → ENTERE
in advance so that the channel automatically changes to the You can set a desired channel to be displayed automatically
selected program channel at the specified time. Program at the intended time. In addition, you can view, modify or
entries may appear blank or out of date depending on a delete a channel you have reserved to watch. Set the current
channel status. time first to use this function.
Guide Wed, 6 Oct 10:54 pm
Using Option Menu t
DTV Air 08.1 Rede TV!HD
Home and Away Set each channel using the menu options (Cancel schedule,
9:48 pm - 12:05 am
Edit Schedule, Manually Schedule, View Guide).
ATLÉTICO MG X CORINTHIANS(HD)
08.1 Rede TV!HD 1. Press the TOOLS button to select the Manually
Channel View - All Schedule.
05.1
Today
Globo HD
12:00 am

JORNAL DA GLOBAL
12:30 am

Time Team
1:00 am 1:30 am
✎✎You can press the a (Manually Schedule) directly
05.1 Globo HD No Information on the Schedule Manager screen.
07.1 TVN DIGITAL HD No Information

Home and...
2. Press the ◄/►/▲/▼ buttons to set the Antenna,
08.1 Rede TV!HD No Information

09.1 QVC QVC Selection


Channel, Repeat, Date, Start Time.
▼ 11.1 R4DTT No Information
• Antenna: Select the desired broadcasting signal.
a Schedule Mgr b -2 Hours { +2 Hours } Exit `Information k Page E Schedule
• Channel: Select the desired channel.
• Repeat: Select Once, Manual, Sat~Sun, Mon~Fri
1 2 3 4 5 6 7 or Everyday to set at your convenience. If you
select Manual, you can set the day you want.
* It may differ depending on the country.
✎✎ The (c) mark indicates the day you’ve
1 a Red (Schedule Mgr): Moves to the Booking List in selected.
Schedule Manager. • Date: You can set the desired date.
2 b Green (-2 Hours): Viewing the list of programs to be ✎✎ It is available when you select Once in Repeat.
broadcasted before 2 hours. • Start Time: You can set the start time you want.
3 { Yellow (+2 Hours): Viewing the list of programs to be
broadcasted after 2 hours.
✎✎If you want to edit or cancel the schedule, select
the reserved schedule on the Booking List. Press
4 } Blue (Exit): Exits the guide. the TOOLS button and select the Edit Schedule or
5 `(Information): Displays details of the selected Cancel schedule.
program.
✎✎If you select the View Guide, you can see the Guide
6 k (Page): Move to previous or next page. screen.
7 E (Watch / Schedule)
• When selecting the current program, you can watch
the selected program. ¦¦ Memorizing channels
• When selecting the future program, you can reserve
to watch the selected program. To cancel the OOMENUm → Channel → ENTERE
schedule, press the ENTERE button again and
select Cancel schedule.
Antenna (Air / Cable) t
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).

English 13

[PE400-ZS]BN68-04363C.indb
Downloaded from 13
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:54
Basic Features
Auto Program Picture Menu
Scans for a channel automatically and stores in the TV.
■■ Air: Air antenna signal. ¦¦ Changing the Preset Picture Mode
■■ Cable: Cable antenna signal.
OOMENUm → Picture → Picture Mode → ENTERE
✎✎Automatically allocated program numbers may not
correspond to actual or desired program numbers. If a
channel is locked, the PIN input window appears. Picture Mode t
✎✎If the antenna is connected to ANT 2 IN (CABLE), select Select your preferred picture type.
Cable and if it is connected to ANT 1 IN (AIR), select ■■ Dynamic: Suitable for a bright room.
Air.
■■ Standard: Suitable for a normal environment.
✎✎If both ANT 1 IN and ANT 2 IN are connected, select ■■ Movie: Suitable for watching movies in a dark room.
both Air and Cable.

How to Stop Auto Programming ¦¦ Adjusting Picture Settings


1. Press the ENTERE button.
Cell Light / Contrast / Brightness / Sharpness
2. A message will ask Stop Auto Program? Select
Yes by pressing the ▲ or ▼ button. / Color / Tint (G/R)
3. Press the ENTERE button. Your television has several setting options for picture quality
control.
✎✎Settings can be adjusted and stored for each external
device connected to the TV.
¦¦ Other Features
✎✎Lowering picture brightness reduces power
OOMENUm → Channel → ENTERE consumption.

Screen Adjustment
Fine Tune
(analog channels only) OOMENUm → Picture → Screen Adjustment → ENTERE
If the reception is clear, you do not have to fine tune the Set the various picture options such as picture size and
channel, as this is done automatically during the search and aspect ratio.
store operation. If the signal is weak or distorted, fine tune
the channel manually. ■■ Picture Size: Your cable box/satellite receiver may have
its own set of screen sizes as well. However, we highly
■■ Select Fine Tune in the Channel menu. recommend you use 16:9 mode most of the time.
✎✎Fine tuned channels that have been saved are marked 16:9: Sets the picture to 16:9 wide mode.
with an asterisk “*” on the right side of the channel Zoom1: Use for moderate magnification.
number in the channel banner.
Zoom2: Use for a stronger magnification.
✎✎To reset the fine-tuning, select Reset. Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
Crosstalk Noise Reduction (Off / On) 4:3: Sets the picture to basic (4:3) mode.
(analog channels only) ✎✎Do not watch in 4:3 format for a long time. Traces
Reduce diagonal noise in picture caused by the crosstalk of of borders displayed on the left, right and center
signals. of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Color System (Auto / PAL-M / PAL-N / NTSC) Screen Fit: Displays the full image without any cut-off
(analog channels only) when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are input.
Normally the TV can receive image and sound with good
quality in Auto mode. This mode detects the color signal ✎✎The picture size can vary depending on the input
sources automatically. If the color implementation is resolution when content is played using Videos
unsatisfactory, select any of PAL-M, PAL-N or NTSC. under Media Play.

14 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 14
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:54
■■ Position: Adjust the picture position. It is only available ¦¦ Changing the Picture Options
in Zoom1, Zoom2, Wide Fit or Screen Fit.
✎✎After selecting Zoom1, Zoom2 or Wide Fit, select

03 Basic Features
Advanced Settings
Position. Follow the steps below in the Position
screen.
OOMENUm → Picture → Advanced Settings →
1. Select the Position, press the ENTERE ENTERE
button.
(available in Standard / Movie mode)
2. Select the Position button, and then press
ENTERE.
Advanced Settings
3. Press the ▲ or ▼ button to move the picture
up or down. Dynamic Contrast Medium
4. Press the ENTERE button. Black Tone Off
✎✎After selecting Screen Fit in HDMI (1080i/1080p) Flesh Tone 0
or Component (1080i/1080p) mode, you may need
to center the picture. Select Position, then follow RGB Only Mode Off
the steps below in the Position screen.
Color Space Native
1. Select the Position, press the ENTERE
button. White Balance

2. Select the Position button, and then press Gamma 0


ENTERE.
3. Press the ▲, ▼, ◄ or ► button to move the
picture. ■■ Dynamic Contrast (Off / Low / Medium / High): Adjust
4. Press the ENTERE button. the screen contrast.
✎✎If you want to reset the position you adjusted, ■■ Black Tone (Off / Dark / Darker / Darkest): Select the
select Reset in the Position screen. The picture black level to adjust the screen depth.
will be set to its default position. ■■ Flesh Tone: Emphasize pink “Flesh Tone”.
✎✎HD (High Definition): 16:9 - 1080i/1080p (1920x1080), ■■ RGB Only Mode (Off / Red / Green / Blue): Displays
720p (1280x720) the Red, Green and Blue color for making fine
✎✎Settings can be adjusted and stored for each external adjustments to the hue and saturation.
device you have connected to an input on the TV. ■■ Color Space (Auto / Native): Adjust the range of colors
available to create the image.
Input Source Picture Size ■■ White Balance: Adjust the color temperature for a more
ATV, AV 16:9, Zoom1, Zoom2, 4:3 natural picture.
DTV (720p) 16:9, Wide Fit, 4:3 R-Offset / G-Offset / B-Offset: Adjust each color’s (red,
green, blue) darkness.
DTV (1080i, 1080p) 16:9, Wide Fit, 4:3, Screen Fit
R-Gain / G-Gain / B-Gain: Adjust each color’s (red,
Component (480i, 480p, 576i, 16:9, Wide Fit, 4:3 green, blue) brightness.
576p, 720p)
Reset: Resets the White Balance to its default settings.
Component (1080i, 1080p) 16:9, Wide Fit, 4:3, Screen Fit
■■ Gamma: Adjust the primary color intensity.
HDMI (720p, 1080i, 1080p) 16:9, Wide Fit, 4:3, Screen Fit

English 15

[PE400-ZS]BN68-04363C.indb
Downloaded from 15
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:55
Basic Features
Picture Options ■■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
OOMENUm → Picture → Picture Options → ENTERE picture quality.
■■ HDMI Black Level (Low / Normal): Selects the black
level on the screen to adjust the screen depth.
Picture Options
✎✎Available only in HDMI mode (RGB signals).
Color Tone Standard ■■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
Digital Noise Filter Auto
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
MPEG Noise Filter Auto
✎✎Available in TV, AV, Component (480i / 1080i) and
HDMI Black Level Low HDMI (1080i).

Film Mode Off


✎✎If the screen does not seem natural, change its
option to Off / Auto1 / Auto2 in Film Mode.

Reset Picture (Yes / No)


Resets your current picture mode to its default settings.

■■ Color Tone (Cool / Standard / Warm1 / Warm2)


✎✎Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
✎✎Settings can be adjusted and stored for each
external device connected to an input on the TV.
■■ Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
✎✎When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
✎✎Only available for analog channels.
✎✎When the INFO button is pressed, the signal
strength bar is displayed.
✎✎When bar is green, you are receiving the best
possible signal.

16 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 16
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:56
Sound Menu ¦¦ Adjusting Sound Settings

03 Basic Features
¦¦ Changing the Preset Sound Mode Broadcast Audio Options

OOMENUm → Sound → Sound Mode → ENTERE OOMENUm → Sound → Broadcast Audio Options →
ENTERE
Sound Mode t ■■ Audio Language t
(digital channels only)
OOMENUm → Sound → Sound Mode → ENTERE Change the default value for audio languages.
■■ Standard: Selects the normal sound mode. ✎✎The available language may differ depending on
■■ Music: Emphasizes music over voices. the broadcast.

■■ Movie: Provides the best sound for movies. ■■ Multi-Track Sound (MTS) t
(analog channels only)
■■ Clear Voice: Emphasizes voices over other sounds.
Mono: Choose for channels that are broadcasting in
■■ Amplify: Increase the intensity of high-frequency sounds mono or if you are having difficulty receiving a stereo
to allow a better listening experience for the hearing signal.
impaired.
Stereo: Choose for channels that are broadcasting in
stereo.
¦¦ Sound Settings
SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
OOMENUm → Sound → Sound Effect → ENTERE
✎✎Depending on the particular program being
broadcast, you can listen to Mono, Stereo or SAP.
Sound Effect
(standard sound mode only) Speaker Settings
Use the up and down arrow keys to select an option, and
then press ENTERE. OOMENUm → Sound → Speaker Settings → ENTERE
■■ SRS TruSurround HD (Off / On) t ■■ Auto Volume (Off / Normal / Night)
(standard sound mode only) To equalize the volume level on each channel, set to
This function provides a virtual 5.1 channel surround Normal.
sound experience through a pair of speakers using Night: This mode provides an improved sound
HRTF (Head Related Transfer Function) technology. experience compared to Normal mode, making almost
■■ SRS TruDialog (Off / On) no noise. It is useful at night.
(standard sound mode only) ✎✎To use the volume control on the source device
This function allows you to increase the intensity of a connected to the TV, set Auto Volume to Off on
voice over background music or sound effects so that the TV. Otherwise, a change to the volume control
dialog can be heard more clearly. of the source device may not be applied.
■■ Equalizer
Reset Sound (Yes / No)
Use Equalizer to customize sound setting for each
speaker. Reset all sound settings to the factory defaults.
Balance: Adjusts the balance between the right and left
speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
Reset: Resets the equalizer to its default settings.

English 17

[PE400-ZS]BN68-04363C.indb
Downloaded from 17
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:57
Preference Features
System Menu ¦¦ Using the Sleep Timer

¦¦ Setting the Setup OOMENUm → System → Time → Sleep Timer →


ENTERE

Setup ■■ Sleep Timer t: Automatically shuts off the TV


after a preset period of time. (30, 60, 90, 120, 150 and
OOMENUm → System → Setup → ENTERE 180 minutes).
Configure the channels and the time when setting up the TV ✎✎To cancel Sleep Timer, select Off.
for the first time or when resetting the unit.
¦¦ Setting the On / Off Timer
✎✎For the detailed information about setting Setup, refer
to “Setup (Initial Setup)” in User Manual.
OOMENUm → System → Time → On Timer <or> Off
✎✎Enter your 4-digit PIN, the default of which is 0-0-0-0. Timer → ENTERE

¦¦ Setting the Time ■■ On Timer: Three different on timer settings can be


made. You must set the clock first.
Time -- Setup: Select Off, Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun or Manual to set at your
convenience. If you select Manual, you can set up the
OOMENUm → System → Time → ENTERE day you want to activate the timer.
✎✎The current time will appear every time you press the ✎✎The c mark indicates the day you’ve selected.
INFO button. -- Time: Set the hour, minute, am/pm.
■■ Clock: Setting the clock is for using various timer -- Volume: Set the desired volume level.
features of the TV.
✎✎If you disconnect the power cord, you have to set On Timer 1
the clock again.
Setup Off
Clock Mode: Set up the current time manually or
automatically. Sun Mon Tue Wed Thu Fri Sat
- Auto: Set the current time automatically using the time ' ' ' ' ' ' '

from a digital channel. Time 12:00 am


✎✎The antenna must be connected in order to set the Volume 20
time automatically. Source TV
- Manual: Set the current time manually. Antenna Cable

✎✎Depending on the broadcast station and signal, the Channel 3

auto time set up may not be correct. In this case, Close


set the time manually.
R Return
Clock Set: Set the Date and Time.
✎✎Available only when Clock Mode is set to Manual.
✎✎You can set the Date and Time directly by pressing
the number buttons on the remote control.
Time Zone (for Brazil, Chile, Ecuador) : Select your time
zone.
✎✎This function is only available when the Clock
Mode is set to Auto.

18 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 18
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:58
-- Source: Select TV or USB content to be played when ¦¦ Locking Programs
the TV is turned on automatically. (USB can be selected

04 Preference Features
only when a USB device is connected to the TV) OOMENUm → System → Security → ENTERE
-- Antenna (when the Source is set to TV): Select Air or
Cable.
Security
-- Channel (when the Source is set to TV): Select the
desired channel. ✎✎The PIN input screen appears before the setup screen.
-- Music / Photo (when the Source is set to USB): Select ✎✎Enter your 4-digit PIN, the default of which is 0-0-0-0.
a folder in the USB device containing music or photo Change the PIN using the Change PIN option.
files to be played when the TV is turned on automatically. ■■ Channel Lock (Off / On): Lock channels to prevent
✎✎ If there is no music file on the USB device or the unauthorized users, such as children, from watching
folder containing a music file is not selected, the unsuitable program.
Timer function does not operate correctly.
■■ Program Rating Lock: Prevent unauthorized users,
✎✎ When there is only one photo file in the USB, the such as children, from watching unsuitable program with
Slide Show will not play. a user defined 4-digit PIN code.
✎✎ A folder with too long of a name cannot be ✎✎It is only available in Brazil signal.
selected.
✎✎ Each USB you use is assigned its own folder. When
■■ Change PIN: The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in the Enter
using more than one of the same type of USB,
New PIN. Re-enter the same 4 digits in the Confirm
make sure the folders assigned to each USB have
different names. New PIN. When the Confirm screen appears, press the
ENTERE button. Your PIN has been memorized.
✎✎ It is recommended that you use a USB memory
stick and a multi card reader when using On Timer. ✎✎If you forget the PIN code, press the remote control
buttons in the following sequence in Standby
✎✎The On Timer function may not work with USB mode, which resets the PIN to “0-0-0-0” : MUTE
devices with a built-in battery, MP3 players, or
→ 8 → 2 → 4 → POWER (on)
PMPs made by some manufacturers because
these devices take a long time to be recognized.
¦¦ Economical Solutions
■■ Off Timer: Three different off timer settings can be
made. You must set the clock first. OOMENUm → System → Eco Solution → ENTERE
-- Setup: Select Off, Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun or Manual to set at your
Eco Solution
convenience. If you select Manual, you can set up the
day you want to activate the timer. ■■ Energy Saving (Off / Low / Medium / High / Picture
✎✎The c mark indicates the day you’ve selected. Off) t: This adjust the brightness of the TV
-- Time: Set the hour, minute, and am/pm. in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
Off Timer 1 remains on. Press any button except volume button to
turn on the screen.
Setup Off
■■ No Signal Power Off (Off / 15 min. / 30 min. / 60
Sun Mon Tue Wed Thu Fri Sat min.): Sets how quickly the TV switches to standby
' ' ' ' ' ' ' mode, if no picture is being received.
Time 12:00 am ■■ Auto Power Off (Off / On): The TV will be automatically
turned off when no user operation is received for 4
Close hours.

R Return

English 19

[PE400-ZS]BN68-04363C.indb
Downloaded from 19
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:59
Preference Features
¦¦ Other Features Screen Burn Protection

OOMENUm → System → Menu Language → ENTERE OOMENUm → System → Screen Burn Protection →
ENTERE
Menu Language To reduce the possibility of screen burn, this unit is equipped
with screen burn prevention technology. The Time setting
Set the menu language.
allows you to program the time between movement of the
1. Select Menu Language and press the ENTERE picture in minutes.
button.
2. Choose desired language and press the ENTERE
■■ Pixel Shift (Off / On): Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
button.
direction to minimize after image on the screen.
✎✎Choose between English, Português and ✎✎Optimum condition for pixel shift
Español.
Item TV / HDMI
Caption
Horizontal 0~4 3
(On-Screen Text Messages)
Vertical 0~4 3
■■ Caption (Off / On): You can switch the caption function Time (minute) 1~4 min 4 min
on or off. If captions are not available, they will not be
displayed on the screen. ✎✎The Pixel Shift value may differ depending on the
✎✎The Caption feature does not work in Component monitor size (inches) and mode.
or HDMI modes. ✎✎This function is not available in the Screen Fit
■■ Caption Mode: You can select the desired caption mode.
mode. ■■ Auto Protection Time (Off / 10 min. / 20 min. / 40
✎✎The availability of captions depends on the min. / 1 hour): If the screen remains idle with a still
program being broadcasted. image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of
CC1~CC4 / Text1~Text4: (analog channels only) The
ghost images on the screen.
Analog Caption function operates in either analog
TV channel mode or when a signal is supplied from ■■ Scrolling: This function removes after-images on the
an external device to the TV. (Depending on the screen by moving all the pixels on the PDP according
broadcasting signal, the Analog Caption function may or to a pattern. Use this function when there are remaining
may not work with digital channels.) after images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.
✎✎The after-image removal function has to be
executed for a long time (approximately 1 hour) to
effectively remove after-images on the screen. If
the after-image is not removed after performing the
function, repeat the function again.
✎✎Press any key on the remote control to cancel this
feature.
■■ Side Gray (Light / Dark): When you watch TV with the
screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.

20 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 20
www.Manualslib.com manuals search engine 2012-03-27 �� 4:24:59
General DivX® Video On Demand
Shows the registration code authorized for the TV. If you

04 Preference Features
OOMENUm → System → General → ENTERE connect to the DivX web site and register with 10-digit
■■ Game Mode (Off / On): When connecting to a game
registration code, you can download the VOD activation
file. Once you play it using Media Play, the registration is
console such as PlayStation™ or Xbox™, you can enjoy
completed.
a more realistic gaming experience by selecting game
mode. ✎✎For more information on DivX® VOD, visit “http://vod.
✎✎Precautions and limitations for game mode divx.com”.
–– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
–– If you display the TV menu in Game Mode, the
screen shakes slightly.
✎✎Game Mode is not available when the input source
is set to TV.
✎✎After connecting the game console, set Game
Mode to On. Unfortunately, you may notice
reduced picture quality.
✎✎If Game Mode is On:
–– Picture Mode is set to Standard and Sound
Mode is set to Movie.
■■ Panel Lock (Off / On): Lock or unlock all the keys on
the panel.
■■ Boot Logo (Off / On): Display Samsung logo when the
TV is turned on.
■■ AV Color System (Auto / PAL-M / PAL-N / NTSC):
Normally the TV can receive image and sound with good
quality when in the mode Auto. This mode detects the
signal color system automatically. In case of some signal
reception with color unsatisfactory, select the AV Color
System Mode to PAL-M, PAL-N or NTSC.

English 21

[PE400-ZS]BN68-04363C.indb
Downloaded from 21
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:00
Preference Features
Support Menu Software Upgrade
Software Upgrade can be performed by downloading the
¦¦ Support Menu latest firmware from “www.samsung.com” to a USB memory
device.
OOMENUm → Support → ENTERE Current Version-the software already installed in the TV.

Installing the Latest Version


Self Diagnosis
■■ By USB: Insert a USB drive containing the firmware
■■ Picture Test (Yes / No): Use to check for picture upgrade file, downloaded from “www.samsung.com”
problems. into the TV. Please be careful not to disconnect the
Yes: If the test picture does not appear or there is power or remove the USB drive until upgrades are
noise in the test picture, select Yes. There may be a complete. The TV will be turned off and on automatically
problem with the TV. Contact Samsung’s Call Center for after completing the firmware upgrade. When software
assistance. is upgraded, video and audio settings you have made
No: If the test picture is properly displayed, select No. will return to their default settings. We advise you to write
There may be a problem with your external equipment. down your settings so that you can easily reset them
Please check your connections. If the problem persists, after the upgrade.
refer to the external device’s user manual. ■■ Alternative Software: Replace the current software with
■■ Sound Test (Yes / No): Use the built-in melody sound to the alternative.
check for sound problems.
✎✎The melody will be heard during the test even if the Contact Samsung
sound is muted by pressing the MUTE button. View this information when your TV does not work properly
Yes: If you can hear sound only from one speaker or not or when you want to upgrade the software. You can find
at all during the sound test, select Yes. There may be a information regarding our call centers, and how to download
problem with the TV. Contact Samsung’s Call Center for products and software.
assistance.
No: If you can hear sound from the speakers, select No. Contents Home
There may be a problem with your external equipment.
You can enjoy useful and various contents.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
■■ Signal Information: (digital channels only) An HD
channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
■■ Reset: Reset all settings to the factory defaults except
network settings.
✎✎The PIN input screen appears before the setup
screen.
✎✎Enter your 4-digit PIN. Change the PIN using the
Change PIN option.

22 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 22
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:00
Advanced Features
Media Play

05 Advanced Features
¦¦ Using the Media Contents
Enjoy photos, music and movie files saved on a USB Mass Storage Class (MSC) device.

1. Press the CONTENT button to select Media Play.


2. Press ▲/▼ button to select desired menu (Videos,
Photos, Music), then press the ENTERE button.
3. Press ▲/▼ button to select desired device, then press
the ENTERE button again.

Contents Home

Channel List Guide Media Play Schedule Manager Source


R Return

¦¦ Connecting a USB Device

1. Turn on your TV.


TV Side Panel
2. Connect a USB device containing photo, music and movie files to the USB
port on the side of the TV.

(5V 0.5A)
3. When USB is connected to the TV, popup window appears. You can select
the Videos, Photos or Music directly.

✎✎It might not work properly with unlicensed multimedia files.


✎✎Need-to-Know List before using Media Contents
• MTP (Media Transfer Protocol) is not supported.
• The file system supports NTFS (Read Only), FAT16 and FAT32.
• Certain types of USB Digital camera and audio devices may not be compatible with this TV.
• Media Contents only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers (USB HUB are not supported). Devices
should be connected directly to the TV’s USB port.
• Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
• The HDD (Hard Disk Drive) connected to USB is not supported.
• Do not disconnect the USB device while it is loading.
• The higher the resolution of the image, the longer it takes to display on the screen.
• The maximum supported JPEG resolution is 15360 x 8640 pixels.
• For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
• MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the
illegal copying of contents, as well as managing billings and settlements.
• A USB device that requires high power (more than 500mA or 5V) may not be supported.
• If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
• The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
• If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
• If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
• If a file deleted from the PC is still found when Media Contents is run, use the “Empty the Recycle Bin” function on the
PC to permanently delete the file.

English 23

[PE400-ZS]BN68-04363C.indb
Downloaded from 23
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:01
Advanced Features
• Media Contents only supports sequential jpeg format.
• The scene search and thumbnail functions are not supported in the Videos.
• If the number of files and folders saved on a USB storage device is approximately over 4000, the files and folders may
not appear and some folders may not be opened.

Disconnecting a USB Device


• Method 1: Using the SOURCE button.
1. Press the SOURCE button.
2. Select a desired USB device, and then press the TOOLS button. The Tools menu appears.
3. Select Safely Remove USB, and then wait until the selected USB device is disconnected. You can remove a
USB device from the TV.
• Method 2: Using the Media Play home screen.
1. Go to Media Play home screen.
2. Select any category, and then press the ENTERE button.
3. Select a desired USB device, and then press the TOOLS button. The Tools menu appears.
4. Select Safely Remove USB, and then wait until the selected USB device is disconnected. You can remove a
USB device from the TV.
✎✎To remove a USB device from the TV, we recommend use Safely Remove USB function.

¦¦ Screen Display
Move to the desired file using the ◄/►/▲/▼ buttons and then press the ENTERE or � (Play) button. The screen may
differ depending on the way to enter the screen.

Information: Media Play / Videos / SUM / 500 Days of... .avi 1/15

You can ascertain the selected Information:


device name, contents mode, You can ascertain the
folder/file name, page. name, size and created
date of the selected file.

πµ Page Move E Play T Tools R Return

File List Section: Operation Buttons:


You can confirm the - E Play: Plays the selected file.
files and groups that are - T Tools: Displays the option menu.
sorted by category. - R Return: Move to the previous step.
- πµ/b{ Page Move: Move to up or down page.

24 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 24
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:02
Videos

05 Advanced Features
Playing Video
1. Press the ◄/►/▲/▼ button to select the desired video in the file list.
2. Press the ENTERE button or � (Play) button.
–– The selected file name is displayed on the top with its playing time.
–– If video time information is unknown, play time and progress bar are not displayed.
–– During video playback, you can search using ◄ and ► button.
–– You can use (�) (REW) and (µ) (FF) buttons during playback.

✎✎In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself.
■■ Supported Subtitle Formats
–– External

Name File extension


MPEG-4 timed text .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub or .txt
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
Powerdivx .psb

–– Internal

Name Container Format


Xsub AVI Picture Format
SubStation Alpha MKV Text Format
Advanced SubStation Alpha MKV Text Format
SubRip MKV Text Format
MPEG-4 Timed text MP4 Text Format

English 25

[PE400-ZS]BN68-04363C.indb
Downloaded from 25
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:02
Advanced Features
■■ Supported Video Formats

Frame rate Bit rate Audio


File Extension Container Video Codec Resolution
(fps) (Mbps) Codec
*.avi DivX 3.11/4.x/5.x/6.x
*.mkv
*.asf MPEG4 SP/ASP 1920 x 1080 30 AC3
*.wmv
LPCM
*.mp4
H.264 BP/MP/HP ADPCM
*.3gp AVI
(IMA, MS)
*.vro MKV
Motion JPEG 640 x 480 8 AAC
*.mpg ASF
HE-AAC
*.mpeg MP4
Window Media Video v9 WMA
*.ts 3GP 6~30
DD+
*.tp VRO
MPEG2 MPEG
*.trp VOB
(MP3)
*.mov PS
DTS Core
*.flv TS 1920 x 1080 30 G.711
*.vob
(A-Law,
*.svi MPEG1 μ-Law)
*.m2ts
*.mts
*.divx

Other Restrictions
• Video content will not play, or not play correctly, if there is an error in the content or the container.
• Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec
listed in the table.
• If the Index Table is in error, the Seek (Jump) function is not supported.
• Some USB/digital camera devices may not be compatible with the player.
• The menu can be displayed late if the video is over 10Mbps(bit rate).

Video decoder Audio decoder

●● Supports up to H.264, Level 4.1 ●● WMA 10 Pro supports up to 5.1 channel and M2 profile. (LBR
●● H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not mode of M0 is not supported)
supported. ●● WMA lossless audio is not supported.
●● GMC is not supported.

Photos

Viewing a Photo (or Slide Show)


1. Press the ◄/►/▲/▼ button to select the desired photo in the file list.
2. Press the ENTERE button.
✎✎During the slide show, all files in the file list will be displayed in order.
✎✎When you press the � (Play) button in the file list, slide show will be started immediately.
✎✎During the slide show, you can adjust the slide show speed using π (REW) or μ (FF) button.
✎✎You can move to other file using ◄ or ► button.
✎✎Music files can be automatically played during the slide show if the Background Music On is set.
■■ Supported Photo Formats

File Extension Type Resolution


*.jpg JPEG 15360 X 8640
*.bmp BMP 1920 X 1080
*.mpo MPO 15360 X 8640

26 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 26
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:02
Music

05 Advanced Features
Playing Music
1. Press the ◄/►/▲/▼ button to select the desired Music in the file list.
2. Press the ENTERE button or � (Play) button.
–– You can use � (REW) and µ (FF) buttons during playback.

✎✎Only displays the files with supported music file extension. Other file extensions are not displayed, even if they are saved
on the same USB device.
✎✎If the sound is abnormal when playing music files, adjust the Equalizer in the Sound menu. (An over-modulated music
file may cause a sound problem.)
✎✎Using the playback menu
–– Press the ◄/► button to select the desired menu.
• Play / Pause: You can start or stop a music. Alternatively, the ∂ or ∑ button on the remote.
• Repeat Mode (Off / One Song / All): You can play music files repeatedly.
• Shuffle Mode (Off / On): You can play the music randomly.
• Sound Mode (Standard / Music / Movie / Clear Voice / Amplify): You can adjust the sound setting.
■■ Supported Music Formats

File Extension Type Codec Remark


*.mp3 MPEG MPEG1 Audio Layer 3
*.m4a
*.mpa
MPEG4 AAC
*.aac
*.3ga
*.flac FLAC FLAC ●● Seek is not supported. Supports up to 2ch.

*.ogg OGG Vorbis ●● Supports up to 2ch.


●● WMA 10 Pro supports up to 5.1 channel and M2 profile.
*.wma WMA WMA
(LBR mode of M0 is not supported)

¦¦ Media Contents - Additional Functions

Playing the selected Videos/Music/Photos files


1. Press the TOOLS button at each main screen and select Selection Play.
2. Select the desired files.
✎✎ The check box appears to the left of the selected files.
3. Press the ► button to select Play, then press the ENTERE button.
✎✎You can select or deselect all files pressing the Select All / Deselect All.

English 27

[PE400-ZS]BN68-04363C.indb
Downloaded from 27
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:02
Advanced Features
Videos/Music/Photos Play Option menu
During playing a file, press the TOOLS button.

Category Operation Videos Photos Music


Title Search You can move the other file directly. c
You can search the video using ◄ and ► button at one minute c
Time Search interval or entering the number directly.
✎✎ It may not be supported depending on the input source.
Repeat Mode You can play movie files repeatedly. c
Picture Size You can adjust the picture size to your preference. c
Picture Mode You can adjust the picture setting. c c
Sound Mode You can adjust the sound setting. c c
You can change the audio language if the video has more than c
Audio Language
one language.
Subtitle You can set subtitles on/off. c
You can play the video with subtitles. This function only works if c
Subtitle Settings
the subtitles are the same file name as the video.
Start Slide Show / Stop c
You can start or stop a slide show.
Slide Show
Slide Show Speed You can select the slide show speed during the slide show. c
Background Music On / You can set on/off background music when watching a slide c
Background Music Off show.
Background Music Setting You can select background music when watching a slide show. c
Zoom You can zoom into images in full screen mode. c
Rotate You can rotate images in full screen mode. c
Edit Playlist You can edit the play list when playing the desired music. c
Selection Play Select and play multiple files. c
Information You can see detailed information about the played file. c c c

28 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 28
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:03
Other Information
Installing the Wall Mount

06 Other Information
Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as recommended by the manufacturer. Unless it
is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious
damage to the product.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or
injury to yourself or others if you elect to install the TV on your own.

Wall Mount Kit Specifications (VESA)


✎✎The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
xxStandard dimensions for wall mount kits are shown in the table below.
xxWhen purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
xxDo not use screws that do not comply with the VESA standard screw specifications.
xxDo not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
xxFor wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
xxDo not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
xxSamsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
xxDo not mount the TV at more than a 15 degree tilt.
xxAlways use two people to mount the TV to a wall.
VESA screw hole
TV size in Standard
Product Family specs (A * B) in Quantity
inches Screw
millimeters
43~51 400 X 400
PDP-TV M8 4
60~64 600 X 400

✎✎Remove the screws in the mounting holes before you install the wall mount.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury
due to electric shock.

English 29

[PE400-ZS]BN68-04363C.indb
Downloaded from 29
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:04
Other Information
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or
destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on
the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

¦¦ To avoid the TV from falling


1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎✎You may need additional material such as an anchor
depending on the type of wall.
✎✎Since the necessary clamps, screws, and string are not
supplied, please purchase these additionally.
2. Remove the screws from the center back of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
✎✎Screws may not be supplied with the product. In this case,
please purchase the screws of the following specifications.
✎✎Screw Specifications
• For a 43 ~ 64 inch PDP TV: M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong string and then tie the string tightly.
✎✎NOTE
• Install the TV near to the wall so that it does not fall
backwards.
• It is safe to connect the string so that the clamps fixed on
the wall are equal to or lower than the clamps fixed on the
TV.
• Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt
about the security of your connections, contact a professional
installer.

Anti-theft Kensington Lock


The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual
provided with the Kensington Lock for additional information on proper use.
✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon.
✎✎The position and color may differ depending on the model.
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object
such as desk or chair.
2. Slide the end of the cable with the lock attached through the
looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product.
4. Lock the lock.
✎✎These are general instructions. For exact instructions, see the
User manual supplied with the locking device. <Optional>
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington slot may be different depending on
the TV model.

30 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 30
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:05
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips

06 Other Information
apply, visit “www.samsung.com”, then click on Support, or call Samsung customer service.
Issues Solutions and Explanations
Poor picture First of all, please perform the Picture Test and confirm that your TV is properly displaying the test image.
●● Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as ●● If you have an analog Cable/Set top box, upgrade to a digital set top box. Use HDMI or Component cables to
good as it did in the store. deliver SD (Standard definition) picture quality.
●● Cable/Satellite subscribers: Try digital stations from the channel line up.
●● Air/Cable Antenna connection: Try digital stations after performing Auto program.
●● Adjust the Cable/Set top box video output resolution to 480p.
The picture is distorted: ●● Compression of video contents may cause picture distortion, especially in fast moving pictures such as sports
macroblock error, small block, and action movies.
dots, pixelization. ●● Low signal level can cause picture distortion. This is not a TV problem.
●● Mobile phones used close to the TV (up to 3.3 ft) may cause noise in picture on analog and digital TV.
Color is wrong or missing. ●● If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness. ●● Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
●● Adjust Energy Saving option in the TV menu (go to MENU - System - Eco Solution - Energy Saving)
●● Try resetting the picture to view the default picture setting. (go to MENU - Picture - Reset Picture)
There is a dotted line on the ●● If the picture size is set to Screen Fit, change it to 16:9.
edge of the screen. ●● Change cable/satellite box resolution.
The picture is black and white. ●● If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input
1 on the TV.
When changing channels, the ●● If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until the
picture freezes or is distorted or cable box reboots. It may take up to 20 minutes.
delayed. ●● Set the output resolution of the cable box to 480p.
Sound Problem First of all, please perform the Sound Test to confirm that your TV audio is properly operating. (go to
MENU - Support - Self Diagnosis - Sound Test)
If the audio is ok, the sound problem may be caused by the source or signal.
There is no sound or the sound ●● Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
is too low at maximum volume.
The picture is good but there is ●● If you are using an external device, check the device’s audio output option (ex. you may need to change your
no sound. cable box’s audio option to HDMI when you have a HDMI connected to your TV).
●● Reboot the connected device by reconnecting the device’s power cable.
The speakers are making an ●● Check the cable connections. Make sure a video cable is not connected to an audio input.
inappropriate noise. ●● For Antenna or Cable connections, check the signal information. Low signal level may cause sound distortion.
●● Perform the Sound Test as explained above.

English 31

[PE400-ZS]BN68-04363C.indb
Downloaded from 31
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:06
Other Information
Issues Solutions and Explanations
No Picture, No Video
The TV will not turn on. ●● Make sure the AC power cord is securely plugged into the wall outlet and the TV.
●● Make sure the wall outlet is working.
●● Try pressing the POWER button on the TV to make sure the problem is not the remote control. If the TV turns
on, refer to ‘Remote control does not work’ below.
The TV turns off automatically. ●● Ensure the Sleep Timer is set to Off in the System menu.
●● Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
●● When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no
signal.
There is no picture/video. ●● Check cable connections. (remove and reconnect all cables connected to the TV and external devices).
●● Set your external device’s (Cable/Set top box, DVD, Blu-ray etc) video outputs to match the connections to
the TV input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on
the TV.
●● Make sure your connected devices are powered on.
●● Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
●● Reboot the connected device by reconnecting the device’s power cable.
Antenna(Air/Cable) Connection
The TV is not receiving all ●● Make sure the coaxial cable is connected securely.
channels. ●● Please try Auto Program to add available channels to the channel list. go to MENU - Channel - Auto
Program then select Auto and make sure the correct Cable TV signal type is set in the menu.
●● Verify the Antenna is positioned correctly.
No Caption on digital channels. ●● Check Caption setup menu.
●● Some channels may not have caption data.
The picture is distorted: ●● Compression of video contents may cause picture distortion, especially on fast moving pictures such as
macroblock, error, small block, sports and action movies.
dots, pixelization. ●● A low signal can cause picture distortion. This is not a TV problem.
Others
Purple/green rolling horizontal ●● Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the
bars and buzzing noise from the set-top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
TV speakers with Component
cable connection.
The picture will not display in full ●● HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
screen. ●● Black bars on the top and bottom will appear during movies that have aspect ratios different from your TV.
●● Adjust the picture size options on your external device or TV to full screen.
Plasma TV is making humming ●● Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are
noise. used to create the images on the screen.
●● If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness
lower.
●● You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface.
Also try rerouting your connection cables.
●● Improper installation of wall mount can create excessive noise.

32 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 32
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:06
Issues Solutions and Explanations
Image Retention (Burn In) Issue. ●● To minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction

06 Other Information
technology. Pixel Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side
(Horizontal Dot). The regular, slight movement of the picture reduces screen burn in.
The remote control does not ●● Replace the remote control batteries with the poles (+/–) in the right direction.
work. ●● Clean the sensor’s transmission window on the remote.
●● Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote ●● Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual
control doesn’t turn the TV on or for the SAMSUNG TV code.
off, or adjust the volume.
A “Mode Not Supported” ●● Check the supported resolution of the TV, and adjust the external device’s output resolution accordingly.
message appears.
Caption on TV menu is grayed ●● Caption can not be selected in the TV menu when connected via HDMI or Component.
out. ●● Caption must be activated on the external device.
There is a plastic smell from the ●● This smell is normal and will dissipate over time.
TV.
The TV Signal Information is ●● This function is only available with digital channels from an Antenna / RF / Coax connection.
unavailable in the Self Diagnosis
Test menu.
TV is tilted to the right or left side. ●● Remove the stand base from the TV and reassemble it.
The Channel menu is gray out ●● The Channel menu is only available when the TV source is selected.
(unavailable).
Your settings are lost after 30 ●● If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change
minutes or every time the TV is from Store Demo mode to Home Use mode in the Setup (Initial setup) procedure. Press the SOURCE
turned off. button to select TV mode, and go to MENU → System → Setup (Initial setup) → ENTERE.
You have intermittent loss of ●● Check the cable connections and reconnect them.
audio or video. ●● Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
You see small particles when ●● This is part of the product’s design and is not a defect.
you look closely at the edge of
the frame of the TV.
POP (TV’s internal banner ad) ●● Select Home Use under Setup mode. For details, refer to Setup (Initial Setup).
appears on the screen.
The message “This file may not ●● This may appear because of high bit rate of content. Content generally will play but could experience some
be playable properly.” appears. playability issue.

English 33

[PE400-ZS]BN68-04363C.indb
Downloaded from 33
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:06
Other Information
¦¦ License

TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc.


TheaterSound technology is incorporated under license from SRS Labs, Inc.

SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in speakers, while maintaining steady volume and
delivering rich bass and clear dialog.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents
issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device
that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete
your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Open Source License Notice


In the case of using open source software, Open Source Licenses are available on the product menu.
Open Source License Notice is written only English.

Storage and Maintenance


✎✎If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean
it to watch TV.
✎✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and
screen carefully using the cloth provided or a soft cloth to prevent scratches.

Do not spray water directly onto the product. Any liquid that Clean the product with a soft cloth dampened with a
goes into the product may cause a failure, fire, or electric small amount of water. Do not use a flammable liquid
shock. (e.g. benzene, thinners) or a cleaning agent.

34 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 34
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:08
Specifications

06 Other Information
Environmental Considerations
Operating Temperature 50°F to 104°F (10°C to 40°C)
Operating Humidity 10% to 80%, non-condensing
Storage Temperature -4°F to 113°F (-20°C to 45°C)
Storage Humidity 5% to 95%, non-condensing

Model Name PL43E400

Display Resolution 852 X 480

Screen Size 43 inches

Power Consumption
Normal operation 176W
Standby < 1W

Sound (Output) 10W x 2

Dimensions (WxHxD)
Body 1010.1 X 621.0 X 56.0 mm
With stand 1010.1 X 675.1 X 262.0 mm

Weight
Without Stand 14.1 kg
With Stand 15.3 Kg

✎✎Design and specifications are subject to change without prior notice.


✎✎For information about power supply, and more about power consumption, refer to the label attached to the product.

English 35

[PE400-ZS]BN68-04363C.indb
Downloaded from 35
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:08
Other Information
Index

A Antenna 13 G Game Mode 21 T Time 18


Auto Program 14 Guide 13
U USB 23

B Black Tone 15 K Kensington Lock 30


Broadcast Audio Options 17 V Videos 25
M Media Play 23

C Caption 20 Music 27 W White Balance 15


Channel List 11
Channel Lock 19 P Photos 26
Channel Name Edit 12 Picture Mode 14
Color Tone 16 Picture Size 14
Contents Home 11

R Repeat Mode 28
D Digital Noise Filter 16 RGB Only Mode 15
Dynamic 14
Dynamic Contrast 15
S Schedule Manager 13
Screen Burn Protection 20
E Eco Solution 19 Security 19
Edit Favorites 12 Self Diagnosis 22
Edit Mode 12 Sleep Timer 18
Equalizer 17 Software Upgrade 22
Sound Mode 17
F Favorites 11
Film Mode 16
Fine Tune 14

36 English

[PE400-ZS]BN68-04363C.indb
Downloaded from 36
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:09
Las figuras e ilustraciones de este Manual del usuario se ofrecen como referencia solamente y pueden ser distintas del
aspecto real del producto. El diseño y las especificaciones del producto están sujetos a cambios sin previo aviso.

Información importante sobre la garantía relativa al formato de visualización del


televisor
• Retención de imágenes en la pantalla
No deje imágenes fijas (como las de los videojuegos) en el panel de la pantalla de plasma durante varios minutos. Las imágenes fijas pueden causar
retenciones de imágenes (desgaste). Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de brillo y de contraste de la
pantalla cuando muestre imágenes fijas.
• Calor en la parte superior del TV de plasma
La parte superior del televisor puede calentarse tras un uso prolongado ya que el calor se disipa desde el panel a través de los orificios de
ventilación de la parte superior del aparato.
Esto es normal y no indica ningún defecto ni fallo de funcionamiento de la unidad.
No obstante, debe evitarse que los niños toquen la parte superior del televisor.
• El televisor emite una especie de ‘crujido’.
Es posible que el ‘crujido’ se produzca cuando el televisor se contrae o expande debido a un cambio en el ambiente que lo rodea, por ejemplo, en
la temperatura o humedad. Esto es normal y no constituye un defecto.
• Defectos de celda
La PDP utiliza un panel compuesto de 1.226.880 (nivel SD) a 6.221.000 (nivel FHD) píxeles que requieren una sofisticada tecnología para su
producción. No obstante, es posible que existan algunos píxeles brillantes u oscuros en la pantalla. Estos píxeles no influirán en el rendimiento del
producto.
• Evite que el televisor funcione a temperaturas por debajo de 41°F (5°C)
• La imagen fija visualizada durante demasiado tiempo puede causar daños permanentes en el panel de la PDP.

Ver el televisor de plasma en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en la izquierda,
derecha, arriba o abajo de la pantalla. Reproducir un DVD o el uso de una consola pueden tener el mismo efecto.
La garantía no cubre los daños causados por dichos efectos.
• Imágenes fantasma en la pantalla.
Visualizar imágenes fijas de videojuegos por un período superior al determinado puede producir imágenes fantasma parciales.
Para evitar este efecto, reduzca el brillo y el contraste cuando visualice imágenes fijas durante un tiempo prolongado.
• Garantía
La garantía no cubre ningún daño causado por la retención de imágenes.
La garantía no cubre el desgaste de la pantalla.

2 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 2
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:09
Contenido
Introducción Funciones avanzadas
yy Accesorios................................................................. 4 yy Media Play............................................................... 23
yy Seguridad en el espacio de instalación...................... 4 Uso de los contenidos multimedia 23
yy Uso del controlador del televisor (Tecla del panel)....... 5 Conexión de un dispositivo USB 23
yy Botones del control remoto........................................ 6 Visualización de pantalla 24
yy Conexión a una antena.............................................. 7 Funciones adicionales de los contenidos multimedia 27
yy Configuración (Configuración inicial)........................... 7
Otra información
Conexiones yy Instalación del montaje de pared.............................. 29
yy Conexión a un dispositivo AV..................................... 9 yy Fijación del televisor a la pared................................. 30
yy Cambiar la fuente de entrada................................... 10 Para impedir que el televisor se caiga 30
yy Bloqueo antirrobo Kensington.................................. 30
yy Solución de problemas............................................ 31
Funciones básicas
Licencia 34
yy Menú de canales..................................................... 11 yy Almacenamiento y mantenimiento........................... 34
Uso del botón INFO (Guía actual y Siguiente) 11 yy Especificaciones...................................................... 35
Uso del menú Canal 11 yy Índice....................................................................... 36
Memorización de canales 13
Otras funciones 14
yy Menú de imágenes.................................................. 14
Cambio del modo preestablecido de la imagen 14
Ajuste de configuración de imagen 14
Cambio de las opciones de imagen 15
yy Menú de sonido....................................................... 17
Cambio de los modos preestablecidos de sonido 17
Configuración de sonido 17
Ajuste de la configuración de sonido 17

Características de preferencia
yy Menú de sistema..................................................... 18
Configuración de Configuración 18
Configuración de la hora 18
Uso del temporizador 18
Configuración de temporizador encendido/apagado 18
Bloqueo de programas 19
Soluciones económicas 19
Otras funciones 20
yy Menú de soporte técnico......................................... 22
Menú de soporte técnico 22

¡Compruebe este símbolo!

t O
Esta función se puede utilizar pulsando el botón Guía paso a paso :
NOTA
TOOLS del mando a distancia. Explica cómo acceder al menú.

Español 3

[PE400-ZS]BN68-04363C.indb
Downloaded from 3
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:09
Introducción
Accesorios
✎✎Asegúrese de que los siguientes elementos estén incluidos con su televisor. Si falta algún elemento, comuníquese con
su distribuidor.
✎✎Los colores y las formas pueden variar según el modelo.
✎✎Verifique que no haya ningún accesorio oculto detrás o debajo de los materiales de embalaje cuando abra la caja.
• Control remoto y pilas (AAA x 2)
• Manual del usuario • Paño de limpieza
• Tarjeta de garantía / Guía de seguridad (No disponible en algunos • Cable de alimentación
lugares)

Cables de entrada (vendidos en forma separada)

HDMI Componente Cable mixto (AV) Cable coaxial (RF)

Seguridad en el espacio de instalación


Mantenga las distancias requeridas entre el producto y otros objetos (por ejemplo, paredes) para asegurar la ventilación adecuada.
En caso contrario, podría producirse un incendio o podría surgir un problema en el producto, debido a un incremento en la temperatura interna del
producto.
✎✎ Cuando utiliza un soporte o un montaje de pared, utilice únicamente las piezas proporcionadas por Samsung Electronics.
• Si utiliza piezas proporcionadas por otro fabricante, podría tener problemas con el producto o sufrir una lesión debido a la caída del
producto.
✎✎ El aspecto puede variar según el producto.
✎✎ Tenga cuidado cuando conecte el televisor debido a que algunas partes pueden estar algo calientes.
Instalación con un soporte. Instalación con un montaje de pared.

10 centímetros 10 centímetros

10 centímetros 10 centímetros 10 centímetros 10 centímetros

10 centímetros

4 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 4
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:12
Uso del controlador del televisor (Tecla del panel)
✎✎El color y la forma del producto pueden variar según el modelo.

01 Introducción
Menú de funciones
CONTENT

m R s

Regresar

Controlador del televisor

Sensor de control remoto

Encendido Enciende el televisor pulsando el controlador en modo de espera.

Ajuste del volumen Ajusta el volumen moviendo el controlador de lado a lado cuando el televisor está encendido.

Selecciona un canal moviendo el controlador hacia arriba y hacia abajo cuando el televisor está
Selección de un canal
encendido.

Pulse el controlador cuando el televisor está encendido, luego aparece la pantalla del menú de
Uso del menú de funciones
funciones. Si lo vuelve a pulsar, la pantalla del menú de funciones desaparece.

Seleccione el MENÚ(m) moviendo el controlador en la pantalla del menú de funciones. Aparece


Selección del MENÚ (m)
la OSD (presentación en pantalla) de las características de su televisor.

Selecciona el CONTENT moviendo el controlador en la pantalla del menú de funciones. Aparece


Selección del CONTENT
la pantalla principal Inicio de contenido.

Selecciona el Origen(s) moviendo el controlador en la pantalla del menú de funciones. Aparece


Selección del Origen (s)
la pantalla Origen.

Seleccione el Apagar (P) para apagar el televisor moviendo el controlador en la pantalla del
Apagar (P)
menú de funciones.

✎✎Sale del menú cuando pulsa el controlador más de 1 segundo.


✎✎Al seleccionar la función moviendo el controlador en la dirección arriba/abajo/izquierda/derecha, no se debe presionar
el controlador. Si lo presiona antes, no estará operativo para moverlo hacia arriba/abajo/izquierda/derecha.

Modo suspensión
Su televisor ingresa en el modo Suspensión cuando lo apaga y continúa consumiendo una pequeña cantidad de energía
eléctrica. Por motivos de seguridad y para disminuir el consumo de energía, no deje su televisor en modo Suspensión durante
períodos prolongados (cuando se va de vacaciones, por ejemplo). Es mejor desenchufar el cable de alimentación.

Español 5

[PE400-ZS]BN68-04363C.indb
Downloaded from 5
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:12
Introducción
Botones del control remoto
✎✎Este control remoto tiene puntos Braille en los botones de encendido, de canales y de volumen, y puede ser utilizado
por personas con discapacidades visuales.

Enciende y apaga el televisor. Mostrar y seleccionar las fuentes de


video disponibles.

Pulse para acceder directamente a los


canales.

Pulse este botón para seleccionar canales Volver al canal anterior.


adicionales (digitales) emitidos por la misma
emisora. Por ejemplo, para seleccionar el Cortar el sonido temporalmente.
canal ‘54.3’, pulse ‘54’, luego pulse ‘-’ y ‘3’.

Ajusta el volumen. Cambiar los canales.

Muestra la lista de canales en la pantalla. Muestra el menú principal en pantalla.


CONTENT GUIDE
Ver el Inicio de contenido. Muestra la EPG
(Guía electrónica de programas).
Selecciona rápidamente las funciones usadas Muestra la información en la pantalla del
con más frecuencia. televisor.
Selecciona los elementos del menú en pantalla
y cambia los valores que se ven en el menú.

Volver al menú anterior. Salir del menú.

Utilice estos botones de acuerdo con la


MTS: Pulse para elegir programas estéreo, indicación en pantalla.
MTS
mono o de audio independiente (emisión
Utilice estos botones en una función específica.
SAP).
P.SIZE: Elegir el tamaño de la imagen.
CC: Controla el decodificador de subtítulos
digitales.

Instalación de las pilas (tamaño de las pilas: AAA)

✎✎NOTA
xxUtilice el control remoto a menos de 7 metros (23 pies) del televisor.
xxLa luz brillante puede afectar el funcionamiento del control remoto.
Evite utilizarlo cuando esté cerca de luces fluorescentes especiales
o carteles de neón.
xxEl color y la forma pueden variar según el modelo.

6 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 6
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:13
Conexión a una antena

01 Introducción
Cuando se enciende el televisor por primera vez, los parámetros de configuración básicos se establecen automáticamente.
✎✎Conexión del cable de alimentación y la antena.
✎✎El dispositivo PDP puede interferir con una radio amateur o radio AM.
✎✎Usar unidades portátiles y móviles emisoras/receptoras o radios amateur o AM cerca de su televisor puede hacer que
el televisor funcione incorrectamente.
✎✎La posición de la entrada de alimentación puede variar según el modelo.

Antena VHF/UHF
Cable de antena (no suministrado)

o Cable
ANT OUT

Entrada de alimentación

Configuración (Configuración inicial)


Cuando se enciende el televisor por primera vez, una secuencia de indicaciones en pantalla le ayuda a configurar los parámetros de
configuración básicos. Pulse el botón POWERP. Configuración está disponible sólo cuando el Origen está establecido como TV.
✎✎Para iniciar la función Configuración, ingrese la contraseña usando el control remoto. La contraseña predeterminada
es 0-0-0-0.
✎✎Para regresar al paso anterior, pulse el botón Anterior.
1. Idioma del menú: Seleccionar un idioma del menú

Pulse el botón ▲ o ▼, luego pulse el botón ENTERE. Seleccione el idioma de la OSD (presentación en pantalla).

2. Modo de uso: Seleccionar el modo de uso

Pulse el botón ▲ o ▼, luego pulse el botón ENTERE.


• Seleccione el modo Uso domiciliario. El modo Demo comercio se utiliza en entornos de comercios minoristas.
• Al pulsar el controlador del televisor, aparece la pantalla del menú de funciones. Seleccione el botón MENU(m) y
manténgalo pulsado más de 5 segundos utilizando el controlador. El modo Demo comercio queda configurado.
Cancele el Demo comercio seleccionando Origen(s) y manteniéndolo pulsado más de 5 segundos.
• Demo comercio es sólo para la exhibición en el comercio. Si lo selecciona, no se podrán utilizar varias funciones.
Seleccione Uso domiciliario para mirar televisión en su casa.

Español 7

[PE400-ZS]BN68-04363C.indb
Downloaded from 7
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:14
Introducción
3. Prog. Automática (1): Seleccionar cómo mira televisión

Busquemos y guardemos canales en el TV. ¿Necesita buscar canales?


• Sí, lo necesito.: Memorizar todos los canales disponibles usando el cable RF.
• No, no lo necesito.: No se necesita el Ajuste automático cuando se conecta un televisor al receptor de satélite.
✎✎Puede completar el Configuración seleccionándolo.
4. Prog. Automática (2): Seleccionar y memorizar canales

Seleccione el botón Siguiente para ejecutar la Prog. Automática.


Pulse el botón ▲ o ▼ para seleccionar Aire o Cable y luego pulse el botón ENTERE.
La búsqueda de canales comenzará automáticamente.
Para obtener más información, consulte Canal → Prog. Automática.
✎✎Pulse el botón ENTERE en cualquier momento para interrumpir el proceso de memorización.
5. Reloj: Configuración del Modo Reloj

Configure el Modo Reloj en forma automática o manual.


• Automático : Seleccione la zona horaria donde vive. (para Brasil, Chile, Ecuador)
• Manual : Le permite configurar la fecha y hora actual en forma automática.

6. Configuración Completada

Pulse el botón ENTERE.


✎✎Se muestra la configuración terminada.

Si desea restablecer esta función...

OO MENUm → Sistema → Configuración → ENTERE

8 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 8
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:14
Conexiones
Conexión a un dispositivo AV

02 Conexiones
¦¦ Dispositivos disponibles: DVD, reproductor de Blu-ray, receptor de cable HD,
receptor de satélite HD STB (Set-Top-Box)

Dispositivo

9$
Cable HDMI (no suministrado)
HDMI OUT

Uso de un cable HDMI


✎✎HDMI IN 1, 2
xxEs posible que la imagen no se visualice normalmente (si se visualiza) o que el audio no funcione si se conecta al
televisor un dispositivo externo que utiliza una versión más antigua del modo HDMI. En este caso caso, póngase en
contacto con el fabricante del dispositivo externo para confirmar la versión HDMI y, si está desactualizada, solicitar
una actualización.
xxAsegúrese de comprar un cable HDMI certificado. De lo contrario, la imagen puede no aparecer o puede producirse
un error de conexión.
xxSe recomienda usar un cable HDMI básico de alta velocidad o un cable HDMI con Ethernet. Este producto no admite
la función Ethernet a través de HDMI.

¦¦ Dispositivos disponibles: reproductor de DVD, reproductor de Blu-ray, receptor de


cable, receptor de satélite STB, VCR.

Rojo BlancoAmarillo

Rojo Blanco Rojo Azul Verde

Cable de componente Cable de audio Cable de audio Cable de video


(no suministrado) (no suministrado) (no suministrado) (no suministrado)

Dispositivo Dispositivo

Uso de un cable de componentes o un cable de audio a video


✎✎Cuando se conecta a AV IN, el color de la entrada AV IN [Y/VIDEO] (verde) no coincide con el cable de video
(amarillo).
✎✎Para una mejor calidad de imagen, se recomienda la conexión de componentes antes que la conexión A/V.

Español 9

[PE400-ZS]BN68-04363C.indb
Downloaded from 9
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:16
Conexiones
✎✎NOTA
xxNo se admite el modo entrelazado.
xxEl aparato puede funcionar incorrectamente si se selecciona un formato de video que no sea estándar.
xxLas entradas de PC y PC/DVI AUDIO IN no son compatibles.
xxEl DIGITAL AUDIO OUT(OPTICAL) no se admite.
SERVICIO

Conector para servicio solamente.

Cambiar la fuente de entrada

¦¦ Origen
Se utiliza para seleccionar el televisor u otra fuente de entrada externa como DVD / reproductores de Blu-ray / receptor de
cable / receptor de satélite STB conectado al televisor.

1. Pulse el botón SOURCE en su control remoto.


2. Seleccione la fuente de entrada externa que desee.
■■ TV / HDMI1 / HDMI2 / AV / Componente
✎✎En Origen, se resaltan las entradas conectadas.
Cómo usar Editar Nombre
En Origen, pulse el botón TOOLS, y luego podrá configurar el nombre de las fuentes de entrada externas que desee.
■■ VCR / DVD / STB cable / STB satélite / STB PVR / Receptor AV / Juego / Filmadora / PC / DVI PC / Dispositivos DVI / TV
/ IPTV / Blu-ray / HD DVD / DMA: Dé un nombre al dispositivo conectado a las tomas de entrada para facilitar su elección de la
fuente de entrada.

Información
Puede ver información detallada acerca del dispositivo externo conectado.

10 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 10
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:16
Funciones básicas
Menú de canales Lista de canales
Puede ver información sobre canales, Can. agrds. o

03 Funciones básicas
¦¦ Uso del botón INFO (Guía actual y Siguiente) Favoritos 1-5.
La pantalla identifica el canal actual y el estado de ✎✎Cuando pulsa el botón CH LIST en el control remoto,
determinadas configuraciones de audio-video. se mostrará la pantalla Lista de canales de inmediato.
La guía Ahora y Siguiente muestra información de ■■ Can. agrds.: Muestra todos los canales añadidos.
programación de televisión diaria para cada canal según el ■■ Favoritos 1-5: Muestra todos los canales favoritos.
horario de emisión.
✎✎Se mostrará Favoritos 1-5 cuando se encuentra
■■ Desplácese◄, ► para ver información de un programa configurada la opción Edit. favoritos.
deseado mientras mira el canal actual.
✎✎Si desea ver los canales favoritos que agregó,
pulse el botón CH LIST y luego pulse L (Modo
¦¦ Uso del menú Canal
CH) para visualizar Favoritos 1-5.

OOMENUm → Soporte técnico → Inicio de contenido → ✎✎Uso de los botones de función con la Lista de
ENTERE canales.

Pulse el botón CONTENT para seleccionar Inicio de


■■ T (Herramientas): Muestra el menú de opciones.
contenido, luego seleccione el menú deseado. Se mostrará ■■ L (Modo CH / Canal): Desplácese hacia Favoritos
cada pantalla. 1-5 cuando está configurada la opción Edit. favoritos.
✎✎Cuando selecciona Vista prog. en el menú T
(Herramientas), puede moverse hacia otros
canales usando el botón L (Canal).
■■ E (Ver / Información): Ve el canal que usted
selecciona. / Muestra detalles del programa
seleccionado.
■■ k (Página): Pasa a la página anterior o siguiente.
Inicio de contenido
Cómo usar Vista program. en la Lista de canales
(canales digitales solamente)
Lista de canales Guía Media Play Admin. de programa Origen Cuando configura Vista program. en Lista de canales, sólo
R Regresar puede configurar el programa en Vista prog..
1. Pulse el botón CH LIST, luego seleccione el canal digital
deseado.
2. Pulse el botón TOOLS y luego seleccione Vista prog..
Aparece la lista de programas de ese canal.
3. Pulse los botones ▲/▼ para seleccionar el
programa deseado y luego pulse el botón ENTERE
(Información).
4. Seleccione Vista program. y luego pulse el botón
ENTERE.
✎✎Si desea cancelar Vista program., siga los Paso 1 a 3
y luego seleccione Cancelar prog..

Español 11

[PE400-ZS]BN68-04363C.indb
Downloaded from 11
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:17
Funciones básicas
Uso del menú de opciones t Uso del menú de opciones en Modo Editar t
Configure cada canal usando las opciones del menú Pulse el botón ◄/► para seleccionar el modo
Lista de canales (Vista prog., Edit. favoritos, Bloquear/ canal(Can. agrds. / Todos los canales / Favoritos 1-5).
Desbloquear, Edición de nombre de canal, Borrar, • Can. agrds.: Muestra todos los canales añadidos.
Información, Cambiar antena, Modo Editar). Los
• Todos los canales: Muestra todos los canales
elementos del menú de opciones pueden variar según el
disponibles actualmente.
estado del canal.
• Favoritos 1-5: Muestra todos los canales favoritos.
1. Seleccione un canal y pulse el botón TOOLS. Se mostrará Favoritos 1-5 cuando se encuentra
2. Seleccione una función y cambie su configuración. configurada la opción Edit. favoritos.
■■ Vista prog.: Muestra el programa cuando se selecciona Configure cada canal usando las opciones del menú
un canal digital. (Edit. favoritos, Bloquear/Desbloquear, Añadir/
Borrar, Quitar selec., Seleccionar todo). Los
■■ Edit. favoritos t: Configure los canales que mira elementos del menú de opciones pueden variar según el
con frecuencia como favoritos. Añada o borre el canal tipo y el estado del canal.
seleccionado en Favoritos 1-5.
1. Pulse el botón TOOLS en la pantalla Lista de
1. Seleccione Edit. favoritos y luego pulse el botón canales, luego seleccione Modo Editar. Aparece
ENTERE. una casilla de verificación a la izquierda del canal.
2. Pulse el botón ENTERE para seleccionar 2. Pulse los botones ▲/▼ para seleccionar el canal
Favoritos 1-5, luego pulse el botón Aceptar. deseado y luego pulse el botón ENTERE.
✎✎Se puede agregar un canal de favoritos en La marca (c) indica el canal que usted ha
varios favoritos entre Favoritos 1-5. seleccionado.
■■ Bloquear/Desbloquear: Bloquee un canal de modo ✎✎Puede seleccionar más de un canal.
que no pueda seleccionarse ni verse. ✎✎Pulse el botón ENTERE nuevamente para
✎✎Esta función sólo está disponible cuando la deseleccionar el canal.
función Bloqueo de canales está configurada en 3. Pulse el botón TOOLS, luego seleccione una
Encendido. función y cambie su configuración.
✎✎Aparece la pantalla de entrada de PIN. Ingrese su • Edit. favoritos: Configure los canales seleccionados
PIN de 4 dígitos, el predeterminado es "0-0-0-0". que mira con frecuencia como favoritos.
Cambie el PIN usando la opción Cambiar Código. ✎✎ La pantalla Edit. favoritos tiene cinco grupos
■■ Edición de nombre de canal (canales analógicos (Favoritos 1, Favoritos 2, etc.). Puede añadir
solamente): Asigne un nombre de canal personal. un canal favorito a cualquiera de los grupos.
■■ Borrar: Borre un canal de la lista de canales. Pulse los botones ▲/▼ para seleccionar un
■■ Información: Muestra detalles del programa
grupo.
seleccionado. • Bloquear/Desbloquear: Bloquee un canal de
✎✎Pulse Ver para cambiar el canal directamente. modo que no pueda seleccionarse ni verse.
✎✎ Esta función sólo está disponible cuando la
■■ Cambiar antena: Cambia a Aire o Cable. función Bloqueo de canales está configurada
■■ Modo Editar: Puede seleccionar los canales deseados en Encendido.
y editarlos. Para obtener información detallada sobre
el uso de Modo Editar consulte "Uso del menú de
✎✎Aparece la pantalla de entrada de PIN. Ingrese
su PIN de 4 dígitos, el predeterminado es
opciones en Modo Editar". "0-0-0-0". Cambie el PIN usando la opción
Cambiar Código.
• Añadir / Borrar: Borrar o añadir un canal para que
se muestren los canales que se desee.
✎✎ Esta Añadir sólo está disponible en el Todos
los canales.
✎✎El menú Añadir sólo aparece con los canales
borrados.
✎✎Un canal de color gris quiere decir que se ha
suprimido.
• Quitar selec.: Se cancelan los canales
seleccionados.
• Seleccionar todo: Seleccione todos los canales de
la lista de canales.

12 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 12
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:17
Guía Admin. de programa
La información de EPG (Guía electrónica de programas) es

03 Funciones básicas
suministrada por las emisoras. Usando las programaciones OOMENUm → Soporte técnico → Inicio de contenido →
suministradas por las emisoras, usted puede especificar los Admin. de programa → ENTERE
programas que desea ver con anticipación de modo que Puede configurar un canal deseado para que se muestre
el canal cambia automáticamente al canal del programa automáticamente a una hora establecida. Además, puede
seleccionado en el horario especificado. Las entradas de ver, modificar o borrar un canal que haya reservado para ver.
programas pueden aparecer en blanco o desactualizadas Para utilizar esta función, primero configure la hora actual.
dependiendo del estado del canal.
Uso del menú de opciones t
Guía Mie, 6 Oct 10:54 pm

Configure cada canal usando las opciones del menú


DTV Air 08.1 Rede TV!HD
Home and Away (Cancelar prog., Editar programación, Prog. manual, Guía
9:48 pm - 12:05 am
de visión).
ATLÉTICO MG X CORINTHIANS(HD)
08.1 Rede TV!HD 1. Pulse el botón TOOLS para seleccionar la Prog.
Vista canal - Todos manual.
05.1
Hoy
Globo HD
12:00 am

JORNAL DA GLOBAL
12:30 am

Time Team
1:00 am 1:30 am
✎✎Puede pulsar a (Editar programación)
05.1 Globo HD Sin información directamente en la pantalla Admin. de programa.
07.1 TVN DIGITAL HD Sin información

Home and...
2. Pulse los botones ◄/►/▲/▼ para configurar Antena,
08.1 Rede TV!HD Sin información

09.1 QVC Selección QVC


Canal, Repetir, Fecha, Hora de inicio.
▼ 11.1 R4DTT Sin información
• Antena: Seleccione la señal de emisión deseada.
a G. progra. b -2 horas { +2 horas } Salir `Información k Página E Programación
• Canal: Seleccione el canal deseado.
• Repetir: Seleccione Una vez, Manual, Sáb~Dom,
1 2 3 4 5 6 7 Lun~Vie o Cada día para configurarlo según
su conveniencia. Si selecciona Manual, puede
* Puede variar según el país.
configurar el día que desea.
1 a Rojo (G. progra.): Se desplaza hacia la Lista de ✎✎ La marca (c) indica el día que usted ha
reservas en Admin. de programa. seleccionado.
2 b Verde (-2 horas): Ver la lista de programas a emitir • Fecha: Puede configurar una fecha deseada.
antes de 2 horas. ✎✎ Está disponible sólo cuando selecciona Una
3 { Amarillo (+2 horas): Ver la lista de programas a emitir vez en Repetir.
después de 2 horas. • Hora de inicio: Puede configurar la hora de inicio
4 } Azul (Salir): Sale de la guía. que desea.
5 `(Información): Muestra detalles del programa ✎✎Si desea editar o cancelar la programación,
seleccionado. seleccione la programación reservada en la Lista de
6 k (Página): Pasa a la página anterior o siguiente. reservas. Pulse el botón TOOLS y seleccione Editar
7 E (Ver / Programación): programación o Cancelar progr..

• Al seleccionar el programa actual, puede ver el ✎✎Si selecciona Guía de visión, puede ver la pantalla
programa seleccionado. Guía.
• Al seleccionar el futuro programa, puede reservar
para ver el programa seleccionado. Para cancelar
la programación, pulse el botón ENTERE ¦¦ Memorización de canales
nuevamente y luego seleccione Cancelar prog..
OOMENUm → Canal → ENTERE

Antena (Aire / Cable) t


Antes de que su televisor comience a memorizar los canales
disponibles, debe especificar el tipo de fuente de la señal
que está conectada al televisor (es decir, un sistema de Aire
o de Cable).

Español 13

[PE400-ZS]BN68-04363C.indb
Downloaded from 13
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:18
Funciones básicas
Prog. Automática Menú de imágenes
Busca canales automáticamente y los almacena en el
televisor. ¦¦ Cambio del modo preestablecido de la
■■ Aire: Señal de antena aérea. imagen
■■ Cable: Señal de antena de cable.
✎✎Los números de programa asignados automáticamente OOMENUm → Imagen → Modo de Imagen → ENTERE
pueden no corresponder a los números de programa
reales o deseados. Si un canal está bloqueado, Modo de Imagen t
aparece la ventana de entrada de PIN. Seleccione el tipo de imagen preferido.
✎✎Si la antena está conectada a ANT 2 IN (CABLE), ■■ Dinámico: Adecuado para un entorno iluminado.
seleccione Cable y si está conectada a ANT 1 IN (AIR),
seleccione Aire. ■■ Normal: Adecuado para un entorno normal.
✎✎Si están conectadas ANT 1 IN y ANT 2 IN, seleccione ■■ Película: Adecuado para ver películas en un entorno
Aire y Cable. oscuro.

Cómo detener la programación automática ¦¦ Ajuste de configuración de imagen


1. Pulse el botón ENTERE.
2. Un mensaje preguntará Detener
Luz de la celda / Contraste / Brillo /
autoprogramacion? Seleccione Sí pulsando el Definición / Color / Tinte (V/R)
botón ▲ o ▼. Su televisor tiene diversas opciones de configuración para
3. Pulse el botón ENTERE. controlar la calidad de la imagen.
✎✎Puede ajustar y almacenar la configuración para cada
dispositivo externo conectado al televisor.
¦¦ Otras funciones ✎✎Bajar el brillo de la imagen reduce el consumo de
energía.
OOMENUm → Canal → ENTERE
Ajuste de la pantalla
Sintonia Fina
OOMENUm → Imagen → Ajuste de la pantalla →
(canales analógicos solamente) ENTERE
Si la recepción es clara, no tiene que realizar la sintonización
Configure las diversas opciones de imágenes como un
fina del canal, ya que esta operación se hace de forma
tamaño de imagen y relación de aspecto.
automática durante la búsqueda y la memorización. Si la
señal es débil o está distorsionada, realice manualmente la ■■ Imagen Tamaño: Es posible que el receptor de satélite
sintonización fina del canal. o cable tenga también su propia gama de tamaños de
■■ Seleccione Sintonía fina en el menú Canal.
pantalla. Sin embargo, es muy aconsejable utilizar el
modo 16:9 la mayoría de las veces.
✎✎Los canales ajustados con sintonización fina que se 16:9: Configura la imagen en el modo panorámico 16:9.
han guardado se marcan con un asterisco "*" a la
Zoom1: Permite una ampliación moderada.
derecha del número de canal en la banda del canal.
Zoom2: Permite una ampliación más potente.
✎✎Para reiniciar la sintonía fina, seleccione Reiniciar. Ajuste de ancho: Amplía la relación de aspecto de la
imagen para que se ajuste al ancho total de la pantalla.
Reducción distorsión de inter. (Apagado /
4:3: Configura la imagen en el modo básico (4:3).
Encendido)
✎✎No vea la televisión en formato 4:3 durante largos
(canales analógicos solamente) períodos. Los rastros de bordes a la izquierda,
Reduce el ruido diagonal en la imagen causado por la derecha y centro de la pantalla pueden provocar
interferencia de señales. un desgaste de la pantalla por retención de la
imagen que no está cubierto por la garantía.
Sistema Color (Automático / PAL-M / PAL-N Ajuste pantalla: Muestra la imagen completa sin cortes
/ NTSC) cuando la entrada de la señal es HDMI (720p / 1080i /
1080p) o Componente (1080i / 1080p).
(canales analógicos solamente)
Normalmente el televisor puede recibir imágenes y sonido
✎✎El tamaño de la imagen puede variar según la
resolución de entrada cuando se reproduce
con buena calidad en modo Automático. Este modo
contenido usando Videos en Media Play.
detecta el origen de la señal de color automáticamente. Si
la implementación de color no es satisfactoria, seleccione
cualquiera de PAL-M, PAL-N o NTSC.

14 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 14
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:18
■■ Posición: Ajusta la posición de la imagen. Sólo está ¦¦ Cambio de las opciones de imagen
disponible en Zoom1, Zoom2, Ajuste de ancho o

03 Funciones básicas
Ajuste pantalla.
Configuración avanzada
✎✎Después de seleccionar Zoom1, Zoom2 o Ajuste
de ancho, seleccione Posición. Siga los pasos a
continuación en la pantalla Posición.
OOMENUm → Imagen → Configuración avanzada →
ENTERE
1. Seleccione el botón Posición, luego pulse
ENTERE. (disponible en modo Normal / Película)
2. Seleccione el botón Posición y luego pulse
ENTERE. Configuración avanzada
3. Pulse los botones ▲ o ▼ para mover la imagen Contraste dinámico Medio
hacia arriba o hacia abajo.
Tono del negro Apagado
4. Pulse el botón ENTERE.
✎✎Después de seleccionar Ajuste pantalla en modo Tono de Piel 0

HDMI (1080i/1080p) o Componente (1080i/1080p), Solo modo RGB Apagado


puede ser necesario centrar la imagen. Seleccione
Espacio de color Nativo
Posición, luego siga los pasos a continuación en
la pantalla Posición. Balance de blanco
1. Seleccione el botón Posición, luego pulse
Gamma 0
ENTERE.
2. Seleccione el botón Posición y luego pulse
ENTERE. ■■ Contraste dinámico (Apagado / Bajo / Medio / Alto):
3. Pulse los botones ▲, ▼, ◄ o ► para mover la Ajusta el contraste de la pantalla.
imagen. ■■ Tono del negro (Apagado / Oscuro / Más oscuro / El
4. Pulse el botón ENTERE. más oscuro): Seleccione el nivel de negro para ajustar
✎✎Si desea restablecer la posición que ajustó, la profundidad de la pantalla.
seleccione Reiniciar en la pantalla Posición. ■■ Tono de Piel: Mejore el tono rosado de "Tono de Piel".
La imagen se configurará a su posición ■■ Solo modo RGB (Apagado / Rojo / Verde / Azul):
predeterminada. Muestra los colores Rojo, Verde y Azul para hacer
✎✎HD (Alta Definición): 16:9 - 1080i/1080p (1920x1080), ajustes finos al matiz y a la saturación.
720p (1280x720) ■■ Espacio de color (Automático / Nativo): Ajusta la
✎✎Se puede ajustar y guardar la configuración de cada gama de colores disponibles para crear la imagen.
dispositivo externo conectado a una entrada del ■■ Balance de blanco: Ajusta la temperatura del color
televisor. para obtener una imagen más natural.
Bal. Rojo / Bal. Verde / Bal. Azul: Ajusta la intensidad
Fuente de entrada Imagen Tamaño
de cada color (rojo, verde, azul).
ATV, AV 16:9, Zoom1, Zoom2, 4:3 Gan. Rojo / Gan. Verde / Gan. Azul: Ajusta el brillo de
DTV (720p) 16:9, Ajuste de ancho, 4:3 cada color (rojo, verde, azul).
DTV (1080i, 1080p) 16:9, Ajuste de ancho, 4:3, Reiniciar: Restablece los valores predeterminados de
Ajuste pantalla Balance de blanco.
Componente (480i, 480p, 576i, 16:9, Ajuste de ancho, 4:3 ■■ Gamma: Ajusta la intensidad del color primario.
576p, 720p)
Componente (1080i, 1080p) 16:9, Ajuste de ancho, 4:3,
Ajuste pantalla
HDMI (720p, 1080i, 1080p) 16:9, Ajuste de ancho, 4:3,
Ajuste pantalla

Español 15

[PE400-ZS]BN68-04363C.indb
Downloaded from 15
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:19
Funciones básicas
Opciones de imagen ■■ Filtro de ruido MPEG (Apagado / Bajo / Medio
/ Alto / Automático): Reduce el ruido MPEG para
OOMENUm → Imagen → Opciones de imagen → proporcionar una mejor calidad de imagen.
ENTERE ■■ Nivel de negro HDMI (Bajo / Normal): Permite
seleccionar el nivel de negro en la pantalla para ajustar la
profundidad de la pantalla.
Opciones de imagen
✎✎Disponible sólo en el modo HDMI (señales RGB).
Tono de Color Normal ■■ Modo película (Apagado / Automático1 /
Filtro dig. de ruido Automático
Automático2): Configura el televisor para detectar
automáticamente y procesar las señales de las películas
Filtro de ruido MPEG Automático procedentes de todas las fuentes y ajustar la imagen
para conseguir una calidad óptima.
Nivel de negro HDMI Bajo
✎✎Disponible en TV, AV, Componente (480i / 1080i) y
Modo película Apagado HDMI (1080i).
✎✎Si la pantalla no parece natural, cambie su opción
a Apagado / Automático1 / Automático2 en
Modo película.

Restablezca imagen (Sí / No)


■■ Tono de Color (Frío / Normal / Tibio1 / Tibio2)
Restablece su modo de imagen actual a la configuración
✎✎Tibio1 o Tibio2 se desactivan cuando el modo de predeterminada.
imagen es Dinámico.
✎✎Se puede ajustar y guardar la configuración de
cada dispositivo externo conectado a una entrada
del televisor.
■■ Filtro dig. de ruido (Apagado / Bajo / Medio / Alto
/ Automático / Visualiz. automática): Si la señal de
emisión que recibe el televisor es débil, puede activar
la función Filtro dig. de ruido para reducir la estática y
las imágenes superpuestas que pueden aparecer en la
pantalla.
✎✎Cuando la señal es débil, intente otras opciones
hasta que se vea una imagen de mejor calidad.
Visualiz. automática: Al cambiar los canales
analógicos, muestra la intensidad de señal.
✎✎Sólo disponible para los canales analógicos.
✎✎Cuando se pulsa el botón INFO, aparece la barra
de intensidad de señal.
✎✎Cuando la barra es verde, se está recibiendo la
mejor señal posible.

16 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 16
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:19
Menú de sonido ¦¦ Ajuste de la configuración de sonido

03 Funciones básicas
¦¦ Cambio de los modos preestablecidos de sonido Opciones difusión audio

OOMENUm → Sonido → Sonido Modo → ENTERE OOMENUm → Sonido → Opciones difusión audio →
ENTERE
Sonido Modo t ■■ Idioma del audio t
(canales digitales solamente)
OOMENUm → Sonido → Sonido Modo → ENTERE Cambie los valores predeterminados para los idiomas
■■ Normal: Selecciona el modo de sonido normal. del audio.

■■ Música: Refuerza la música por encima de las voces. ✎✎El idioma disponible puede variar según la emisión.
■■ Película: Ofrece el mejor sonido para películas. ■■ Sonido Multi-Track (MTS) t
(canales analógicos solamente)
■■ Voz clara: Realza las voces respecto de los sonidos.
Mono: Elija esta opción para canales que se emiten en
■■ Amplificar: Aumenta la intensidad del sonido de monoaural o si tiene dificultades con la recepción de
alta frecuencia para permitir una mejor audición a las señales estéreo.
personas con problemas de audición.
Estéreo: Elija esta opción para canales que emiten en
estéreo.
¦¦ Configuración de sonido
SAP: Elija esta opción para escuchar el programa
de audio independiente, que normalmente es una
OOMENUm → Sonido → Efecto de son. → ENTERE traducción de un idioma extranjero.
✎✎En función del programa que se emite, puede
Efecto de son. escuchar en modo Mono, Estéreo o SAP.
(modo de sonido estándar solamente)
Use las teclas de flecha hacia arriba y hacia abajo para Ajustes del altavoz
seleccionar una opción, y luego pulse ENTERE.
■■ SRS TruSurround HD (Apagado / Encendido) t
OOMENUm → Sonido → Ajustes del altavoz →
ENTERE
(modo de sonido estándar solamente)
Esta función ofrece una experiencia de sonido ■■ Vol. Automático (Apagado / Normal / Noche)
envolvente virtual de 5.1 canales a través de un par Para ecualizar el nivel de volumen en cada canal,
de altavoces usando la tecnología HRTF (función de configure en Normal.
transferencia relativa a la cabeza). Noche: Este modo brinda una experiencia de
■■ SRS TruDialog (Apagado / Encendido) sonido mejorada comparado con el modo Normal,
(modo de sonido estándar solamente) prácticamente sin ruido. Es útil de noche.
Esta función le permite aumentar la intensidad de ✎✎Para usar el control de volumen en el dispositivo
una voz por sobre la música de fondo o los efectos de origen conectado al televisor, configure Vol.
de sonido para que el diálogo se escuche con más Automático en Apagado en el televisor. De lo
claridad. contrario, se posible que no se aplique el cambio
■■ Ecualizador
en el control de volumen del dispositivo de origen.
Use el Ecualizador para personalizar el ajuste de sonido Reinic. de son. (Sí / No)
para cada altavoz.
Balance: Ajusta el balance entre los altavoces derecho Restablezca todos los ajustes de sonido a los ajustes
e izquierdo. predeterminados de fábrica.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Ajuste de ancho
de banda): Ajusta el nivel de frecuencias específicas de
ancho de banda.
Reiniciar: Restablece la configuración del ecualizador.

Español 17

[PE400-ZS]BN68-04363C.indb
Downloaded from 17
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:20
Características de preferencia
Menú de sistema ¦¦ Uso del temporizador

¦¦ Configuración de Configuración OOMENUm → Sistema → Tiempo → Temporizador →


ENTERE

Configuración ■■ Temporizador t: Apaga automáticamente el


televisor después de un tiempo predeterminado. (30, 60,
OOMENUm → Sistema → Configuración → ENTERE 90, 120, 150 y 180 minutos).
Configure los canales y la hora cuando realice la ✎✎Para cancelar el Temporizador, seleccione
configuración del televisor por primera vez o cuando vuelva a Apagado.
configurar la unidad.
¦¦ Configuración de temporizador encendido/apagado
✎✎Para obtener información detallada sobre la
configuración de Configuración, consulte
OOMENUm → Sistema → Tiempo → Temporiz. enc. <o>
“Configuración (Configuración Inicial)” en el Manual del Temporiz. apag. → ENTERE
Usuario.
✎✎Ingrese su PIN de 4 dígitos, el predeterminado es "0- ■■ Temporiz. enc.: La activación del temporizador se
0-0-0". puede configurar de tres maneras diferentes. Primero
debe configurar el reloj.
¦¦ Configuración de la hora -- Configuración: Seleccione Apagado, Una vez, Cada
día, Lun~Vie, Lun~Sáb, Sáb~Dom o Manual para
Tiempo configurarlo según su conveniencia. Si selecciona
Manual, puede configurar el día en que desee activar el
temporizador.
OOMENUm → Sistema → Tiempo → ENTERE
✎✎La marca c indica los días que ha seleccionado.
✎✎La hora actual aparecerá cada vez que pulse el botón -- Tiempo: Configure la hora, los minutos, am/pm.
INFO.
-- Volumen: Configure el nivel de volumen deseado.
■■ Reloj : Configure el reloj para usar las diversas funciones
del temporizador del televisor. Temporiz. enc. 1
✎✎Si desconecta el cable de alimentación, debe Configuración Apagado
volver a configurar el reloj.
Modo Reloj: Configure la hora actual en forma manual Dom Lun Mar Mie Jue Vie Sáb
o automática. ' ' ' ' ' ' '

- Automático: El televisor configura la hora actual Tiempo 12:00 am


automáticamente usando la hora de un canal digital. Volumen 20
✎✎Se debe conectar la antena para configurar la hora Origen TV
automáticamente. Antena Cable
- Manual: Configure la hora actual en forma manual. Canal 3

✎✎Según la estación emisora y la señal, la Cerrar


configuración de hora automática puede no
ser correcta. En este caso, configure la hora R Regresar
manualmente.
Config. Reloj: Configure la Fecha y Tiempo.
✎✎Disponible sólo cuando el Modo Reloj está
configurado en Manual.
✎✎Puede configurar la Fecha y Tiempo directamente
pulsando los botones de números en el control
remoto.
Zona horaria (para Brasil, Chile, Ecuador) : Seleccione
su zona horaria.
✎✎Esta función sólo está disponible cuando Modo
Reloj está configurado en Automático.

18 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 18
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:20
-- Origen: Seleccione el contenido TV o USB ¦¦ Bloqueo de programas
para reproducir cuando el televisor se encienda

04 Características de preferencia
automáticamente. (Puede seleccionar USB sólo cuando OOMENUm → Sistema → Seguridad → ENTERE
un dispositivo USB está conectado al televisor)
-- Antena (cuando el Origen se establece en TV): Seguridad
Seleccione Aire o Cable.
-- Canal (cuando el Origen se establece en TV): ✎✎La pantalla de entrada de PIN aparece antes que la
Seleccione el canal deseado. pantalla de configuración.
-- Música / Fotos (cuando el Origen se establece ✎✎Ingrese su PIN de 4 dígitos, el predeterminado es 0-0-
en USB): Seleccione una carpeta en el dispositivo 0-0. Cambie el PIN usando la opción Cambiar código.
USB que contenga los archivos de música o fotos ■■ Bloqueo de canales (Apagado / Encendido): Bloquee
que desea reproducir cuando el televisor se apaga los canales para evitar que usuarios no autorizados,
automáticamente. como los niños, vean un programa inadecuado.
✎✎ Si no hay ningún archivo de música en el ■■ Bloq. Clasif. Prgrms. Evite que usuarios no
dispositivo USB o usted no selecciona una carpeta autorizados, como niños, vean un programa inadecuado
que contenga un archivo de música, la función
con un código de PIN de 4 dígitos definido por el
Temporizador no funciona correctamente.
usuario.
✎✎ Si hay sólo un archivo de foto en el USB, la
✎✎Sólo está disponible en la señal de Brasil.
presentación no se reproducirá.
✎✎ No se puede seleccionar una carpeta con un ■■ Cambiar Código: Aparecerá la pantalla Cambiar
nombre que sea demasiado extenso. Código. Elija 4 dígitos cualquiera para su código PIN e
✎✎ Cada dispositivo USB que utilice tiene asignada su
ingréselo en Ingresar Nuevo Código. Vuelva a ingresar
los mismos 4 dígitos en Confirmar Nuevo Código.
propia carpeta. Al usar más de un dispositivo USB
del mismo tipo, asegúrese de que las carpetas Cuando aparezca la pantalla de Confirmación, pulse el
asignadas a cada dispositivo USB tenga nombres botón ENTERE. Se memorizó su PIN.
distintos. ✎✎Si olvida su código PIN, pulse los botones del
✎✎ Se recomienda utilizar un dispositivo de memoria control remoto con la siguiente secuencia en modo
USB y un lector de múltiples tarjetas al usar el Suspensión, que restablece el código a “0-0-0-0” :
Temporiz. enc.. MUTE → 8 → 2 → 4 → POWER (encendido)
✎✎El Temporiz. enc. puede no funcionar con ¦¦ Soluciones económicas
dispositivos USB con una batería incorporada,
reproductores MP3 o PMP de algunos fabricantes
porque estos dispositivos tardan mucho tiempo en OOMENUm → Sistema → Solución Eco → ENTERE
ser reconocidos.
■■ Temporiz. apag.: La desactivación del temporizador se Solución Eco
puede configurar de tres maneras diferentes. Primero
debe configurar el reloj. ■■ Ahorro de energía (Apagado / Bajo / Medio / Alto
/ Imag. desact.) t: Le permite ajustar el brillo
-- Configuración: Seleccione Apagado, Una vez, Cada del televisor a fin de reducir el consumo de energía. Si
día, Lun~Vie, Lun~Sáb, Sáb~Dom o Manual para selecciona Imag. desact., la pantalla se apaga, pero el
configurarlo según su conveniencia. Si selecciona sonido sigue encendido. Pulse cualquier botón excepto
Manual, puede configurar el día en que desee activar el el botón del volumen para encender la pantalla.
temporizador.
✎✎La marca c indica los días que ha seleccionado. ■■ Apagado por no señal (Apagado / 15 min. / 30 min.
/ 60 min.) Establece la rapidez con la que el televisor
-- Tiempo: Configure la hora, los minutos y am/pm. cambia al modo de espera, si no se recibe ninguna
imagen.
Temporiz. apag. 1
■■ Apagado autom. (Apagado / Encendido): El televisor
Configuración Apagado se apagará automáticamente cuando no se detecta
ninguna operación por parte del usuario durante 4
Dom Lun Mar Mie Jue Vie Sáb
horas.
' ' ' ' ' ' '

Tiempo 12:00 am

Cerrar

R Regresar

Español 19

[PE400-ZS]BN68-04363C.indb
Downloaded from 19
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:20
Características de preferencia
¦¦ Otras funciones Protección de pantalla

OOMENUm → Sistema → Idioma del menú → ENTERE OOMENUm → Sistema → Protección de pantalla →
ENTERE
Idioma del menú Para reducir la posibilidad de desgaste de pantalla, esta
unidad está equipada con tecnología de protección de
Configurar el idioma del menú.
pantalla. La configuración de Tiempo le permite programar el
1. Seleccione Idioma del menú y luego pulse el botón tiempo entre movimientos de la imagen en minutos.
ENTERE.
2. Seleccione el idioma deseado y pulse el botón
■■ Cambio de Pixel (Apagado / Encendido): Con esta
función, puede mover mínimamente los píxeles en PDP
ENTERE.
en dirección horizontal o vertical para minimizar las
✎✎Seleccione entre English, Português y Español. imágenes fantasma en la pantalla.
✎✎Condición óptima para cambio de píxel
Subtítulo
(Mensajes de texto en pantalla) Elemento TV / HDMI

■■ Subtítulo (Apagado / Encendido): Puede activar o Horizontal 0~4 3


desactivar la función de subtítulos. Si los subtítulos no Vertical 0~4 3
están disponibles, no se mostrarán en la pantalla. Tiempo (minuto) 1~4 min 4 min
✎✎La función Subtítulo no está disponible en los
modos Componente o HDMI. ✎✎El valor de Cambio de Pixel puede variar según el
tamaño del monitor (pulgadas) y el modo.
■■ Modo de Subtítulo: Puede seleccionar el modo de
subtítulos deseado. ✎✎Esta función no está disponible en el modo Ajuste
pantalla.
✎✎La disponibilidad de los subtítulos depende del
programa que se está emitiendo. ■■ Tpo. protección auto. (Apagado / 10 min. / 20 min. /
40 min. / 1 hora): Si la pantalla permanece inactiva con
CC1~CC4 / Texto1~Texto4: (canales analógicos
una imagen fija durante un determinado período definido
solamente) La función Subtítulos Analógicos funciona en
por el usuario, el protector de pantalla se activa para
modo de canal de TV analógico o cuando se suministra
evitar la formación de imágenes fantasma en la pantalla.
una señal de un dispositivo externo al televisor. (Según la
señal de emisión, la función Subtítulos Analógicos puede ■■ Desplazamiento: Esta función elimina las imágenes
o no funcionar con canales digitales.) fantasma de la pantalla moviendo todos los píxeles en
el PDP siguiendo un patrón. Utilice esta función cuando
haya imágenes o símbolos fantasma en la pantalla,
especialmente cuando se mostró una imagen fija en la
pantalla durante largos períodos.
✎✎La función de eliminación de imágenes fantasma
debe ejecutarse durante un tiempo prolongado
(aproximadamente 1 hora) para eliminar
efectivamente las imágenes fantasma en la
pantalla. Si la imagen fantasma no se elimina una
vez que usted aplica la función, vuelva a repetir la
función.
✎✎Pulse cualquier tecla del control remoto para
cancelar esta función.
■■ Lateral gris (Claro / Oscuro): Cuando mira televisión
con la relación de pantalla configurada en 4:3, se evita
que se produzcan daños en la pantalla ajustando el
balance de blanco en ambos lados izquierdo y derecho.

20 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 20
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:21
General Video de pago DivX®
Muestra el código de registro autorizado para el televisor.

04 Características de preferencia
OOMENUm → Sistema → General → ENTERE Si se conecta al sitio Web de DivX y se registra usando
■■ Modo Juego (Apagado / Encendido): Cuando se
el código de 10 dígitos, puede descargar el archivo de
activación VOD. Una vez que lo reproduce con Media Play, el
conecta a una consola de juegos como PlayStation™
registro se ha terminado.
o Xbox™, puede disfrutar de una experiencia de juego
más realista seleccionando el menú de juego. ✎✎Para obtener más información sobre DivX® VOD, visite
✎✎Precauciones y limitaciones del Modo Juego “http://vod.divx.com”.
–– Si desea desconectar la consola de juegos y
conectar otro dispositivo externo, configure
Modo Juego como Apagado en el menú de
configuración.
–– Si visualiza el menú de TV en Modo Juego, la
pantalla tiembla ligeramente.
✎✎Modo Juego no está disponible cuando la fuente
de entrada está en modo TV.
✎✎Después de conectar la consola de juegos,
configure el Modo Juego como Encendido.
Lamentablemente, es posible que advierta una
reducción en la calidad de la imagen.
✎✎Si el Modo Juego está Encendido:
–– Modo Juego se configura en Normal y Sonido
Modo se configura en Película.
■■ Bloqueo del panel (Apagado / Encendido): Bloquea o
desbloquea todas las teclas del panel.
■■ Logotipo carga (Apagado / Encendido): Muestra
el logotipo de Samsung cuando el televisor está
encendido.
■■ Sistema de color AV (Automático / PAL-M / PAL-N /
NTSC): Normalmente el televisor puede recibir imágenes
y sonido con buena calidad en modo Automático.
Este modo detecta el sistema de color de la señal
automáticamente. En caso de alguna recepción de señal
con color no satisfactorio, seleccione el modo Sistema
de color AV en PAL-M, PAL-N o NTSC.

Español 21

[PE400-ZS]BN68-04363C.indb
Downloaded from 21
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:21
Características de preferencia
Menú de soporte técnico Actualización del software
La Actualización del software se puede realizar
¦¦ Menú de soporte técnico descargando el último firmware de "www.samsung.com" a
un dispositivo de memoria USB.
OOMENUm → Soporte técnico → ENTERE Versión actual-el software ya instalado en el televisor.

Instalación de la última versión


Autodiagnóstico
■■ Por USB: Inserte una unidad USB que contenga el
■■ Prueba de imagen (Sí / No): Se utiliza para comprobar archivo de actualización de firmware, descargado de
si hay problemas de imagen. “www.samsung.com”, en el televisor. Tenga cuidado de
Sí: Si la imagen de prueba no aparece o si hay ruido no desconectar la alimentación o retirar la unidad USB
en la imagen de prueba, seleccione Sí. Puede haber hasta que la actualización esté completa. El televisor
un problema con el televisor. Comuníquese con el se apagará y encenderá automáticamente después
Centro de Servicio al cliente de Samsung para obtener de completar la actualización del firmware. Cuando
asistencia. se actualice el software, todas las configuraciones de
No: Si se muestra correctamente la imagen de prueba, audio y video regresarán a sus valores predeterminados.
seleccione No. Puede haber un problema con su equipo Aconsejamos tomar nota de sus configuraciones
externo. Compruebe sus conexiones. Si el problema para poder restablecerlas fácilmente después de la
persiste, consulte el manual del usuario del dispositivo actualización.
externo. ■■ Software alternativo: Reemplace el software actual con
■■ Prueba de sonido (Sí / No): Utilice el sonido de la el alternativo.
melodía incorporada para comprobar si hay problemas
con el sonido. contacto samsung
✎✎Se escuchará la melodía durante la prueba Consulte esta información si el televisor no funciona
aunque haya configurado haya apagado el sonido adecuadamente o si desea actualizar el software. Puede
pulsando el botón MUTE. buscar información relacionada con nuestro Centro de
Sí: Si puede oír sonido sólo de un altavoz o nada servicio al cliente, para descargar los productos y el software.
durante la prueba de sonido, seleccione Sí. Puede
haber un problema con el televisor. Comuníquese con el Inicio de contenido
Centro de Servicio al cliente de Samsung para obtener
asistencia. Puede disfrutar de diversos contenidos útiles.
No: Si puede oír sonido de los altavoces, seleccione
No. Puede haber un problema con su equipo externo.
Compruebe sus conexiones. Si el problema persiste,
consulte el manual del usuario del dispositivo externo.
■■ Información de señal: (sólo canales digitales) La
calidad de la recepción de un canal HD es perfecta o
los canales no están disponibles. Ajuste la antena para
aumentar la intensidad de la señal.
■■ Reiniciar: Restablezca toda la configuración a
los ajustes predeterminados de fábrica excepto la
configuración de red.
✎✎La pantalla de entrada de PIN aparece antes que la
pantalla de configuración.
✎✎Ingrese su PIN de 4 dígitos. Cambie el PIN usando
la opción Cambiar Código.

22 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 22
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:21
Funciones avanzadas
Media Play

05 Funciones avanzadas
¦¦ Uso de los contenidos multimedia
Disfrute de archivos de fotos, música y películas almacenados en un dispositivo de clase de almacenamiento masivo (MSC)
USB.

1. Pulse el botón CONTENT para seleccionar Media Play.


2. Pulse el botón ▲/▼ para seleccionar el menú deseado
(Videos, Fotos, Música), luego pulse el botón
ENTERE.
3. Pulse el botón ▲/▼ para seleccionar el dispositivo
deseado, luego pulse el botón ENTERE nuevamente.
Inicio de contenido

Lista de canales Guía Media Play Admin. de programa Origen


R Regresar

¦¦ Conexión de un dispositivo USB

1. Encienda el televisor.
Panel lateral del TV
2. Conecte un dispositivo USB que contenga archivos de fotos, música y
películas al puerto USB en la parte lateral del televisor.

(5V 0.5A)
3. Cuando el USB está conectado al televisor, aparece una ventana emergente.
Puede seleccionar Videos, Fotos o Música directamente.

✎✎Es posible que no funcione correctamente con archivos multimedia sin licencia.
✎✎Lista de lo que debe saber antes de utilizar Contenidos multimedia
• No se admite MTP (Protocolo de Transferencia de Medios).
• El sistema de archivos admite NTFS (sólo lectura), FAT16 y FAT32.
• Ciertos tipos de cámaras y audio digitales USB quizá no sean compatibles con este televisor.
• Contenidos multimedia sólo admite dispositivos USB de clase de almacenamiento masivo (MSC). MSC es un dispositivo
de clase de almacenamiento masivo sólo de transporte de gran capacidad. Algunos ejemplos de MSC incluyen las
unidades de almacenamiento en miniatura y las lectoras de tarjetas flash (no se admiten los HUB USB). Los dispositivos
deben conectarse directamente al puerto USB del televisor.
• Antes de conectar su dispositivo al televisor, haga una copia de seguridad de sus archivos para evitar daños o pérdidas
de datos. SAMSUNG no se hace responsable de ningún daño de archivo de datos ni de ninguna pérdida de datos.
• La unidad de disco duro (HDD) conectada a USB no es compatible.
• No desconecte el dispositivo USB mientras se está cargando.
• Cuanto mayor sea la resolución de la imagen, más tiempo tardará en visualizarse en la pantalla.
• La máxima resolución JPEG admitida es 15360 x 8640 píxeles.
• Para archivos no admitidos o dañados, aparece el mensaje "Formato de archivo no admitido".
• No se pueden reproducir los archivos MP3 con DRM descargados de un sitio no gratuito. La tecnología Gestión de
Derechos Digitales (DRM) admite la creación de contenidos, la distribución y gestión de éstos de modo integrado y
general, incluida la protección de los derechos e intereses de los proveedores de contenidos, la prevención de copias
ilegales de los contenidos, así como la gestión de cobros y acuerdos.
• Es posible que un dispositivo USB que requiera mucha potencia (más de 500mA o 5V) no sea compatible.
• Si el televisor no recibe señal de entrada durante el tiempo establecido en Tpo. protección auto., se iniciará el Protector
de pantalla.
• El modo de ahorro de energía de algunas unidades de disco duro externas pueden desactivarse automáticamente
cuando éstas se conecten al televisor.
• Si se utiliza un cable de extensión USB, el dispositivo USB puede no ser reconocido o los archivos en el dispositivo
pueden no ser leídos.
• Si no se reconoce un dispositivo USB conectado al televisor, la lista de archivos del dispositivo está dañada o un archivo
de la lista no se reproduce, conecte el dispositivo USB a la computadora, formatee el dispositivo y compruebe la
conexión.
• Si un archivo eliminado del ordenador se puede encontrar todavía cuando se ejecuta Contenido multimedia, utilice la
función “Vaciar la papelera de reciclaje” de la computadora para eliminarlo en forma permanente.

Español 23

[PE400-ZS]BN68-04363C.indb
Downloaded from 23
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:22
Funciones avanzadas
• Contenidos multimedia sólo admite el formato jpeg secuencial.
• Las funciones de búsqueda de escena y miniaturas no se admiten en Videos.
• Si el número de archivos y carpetas guardados en un dispositivo de almacenamiento USB supera aproximadamente
los 4000, puede ocurrir que los archivos y carpetas no se muestren y que algunas de las carpetas no se abran.

Desconexión de un dispositivo USB


• Método 1: Utilizando el botón SOURCE.
1. Pulse el botón SOURCE.
2. Seleccione un dispositivo USB y pulse el botón TOOLS. Aparece el menú Herramientas.
3. Seleccione Retire el dispositivo USB con seguridad y luego espere hasta que se desconecte el dispositivo
USB seleccionado. Puede quitar un dispositivo USB del televisor.
• Método 2: Uso de la pantalla de inicio de Media Play.
1. Vaya la pantalla de inicio de Media Play.
2. Seleccione una categoría y pulse el botón ENTERE.
3. Seleccione un dispositivo USB y pulse el botón TOOLS. Aparece el menú Herramientas.
4. Seleccione Retire el dispositivo USB con seguridad y luego espere hasta que se desconecte el dispositivo
USB seleccionado. Puede quitar un dispositivo USB del televisor.
✎✎Para quitar un dispositivo USB del televisor, es aconsejable usar la función Retire el dispositivo USB con
seguridad.

¦¦ Visualización de pantalla
Pase al archivo deseado usando los botones ◄/►/▲/▼ y luego pulse el botón ENTERE o � (Reproducir). La pantalla
puede ser distinta según la forma en que ingrese a la pantalla.

Información: Media Play / Videos / SUM / 500 Días de... .avi 1/15

Puede comprobar el nombre Información:


del dispositivo seleccionado, el Puede comprobar el
modo de contenido, el nombre nombre, el tamaño y la
de archivo/carpeta, la página. fecha de creación del
archivo seleccionado.

πµ Ir página E Reprod. T Herramientas R Regresar

Sección de lista de Botones de operación:


archivos: - E Reprod.: Reproduce el archivo seleccionado.
Puede confirmar los - T Herramientas: Muestra el menú de opciones.
archivos y grupos que - R Regresar: Vuelve al paso anterior.
están ordenados por - πµ/b{ Ir página: Avanza o retrocede páginas.
categoría.

24 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 24
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:22
Videos

05 Funciones avanzadas
Reproducción de video
1. Pulse el botón ◄/►/▲/▼ para seleccionar el video que desee de la lista de archivos.
2. Pulse el botón ENTERE o el botón � (reproducir).
–– El nombre del archivo seleccionado se visualiza en la parte superior con su tiempo de reproducción.
–– Si se desconoce la información de la hora del video, el tiempo de reproducción y la barra de progreso no se muestran.
–– Durante la reproducción de video, puede realizar búsquedas con los botones ◄ y ► .
–– Puede usar los botones (�) (REW) y (µ) (FF) durante la reproducción.

✎✎En este modo, puede disfrutar de clips de películas contenidos en un Juego, pero no se puede reproducir el Juego.
■■ Formatos de subtítulo admitidos
–– Externos

Nombre Extensión del archivo


Texto basado en tiempo MPEG-4 .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub o .txt
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
Powerdivx .psb

–– Internos

Nombre Contenedor Formato


Xsub AVI Formato de imagen
SubStation Alpha MKV Formato de texto
Advanced SubStation Alpha MKV Formato de texto
SubRip MKV Formato de texto
Texto basado en tiempo MPEG-4 MP4 Formato de texto

Español 25

[PE400-ZS]BN68-04363C.indb
Downloaded from 25
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:22
Funciones avanzadas
■■ Formatos de video admitidos

Velocidad de
Extensión del Velocidad en Códec de
Contenedor Códec de video Resolución transferencia
archivo bits (Mbps) audio
(fps)
*.avi DivX 3.11/4.x/5.x/6.x
*.mkv
*.asf MPEG4 SP / ASP 1920 x 1080 30 AC3
*.wmv
LPCM
*.mp4
H.264 BP/MP/HP ADPCM
*.3gp AVI
(IMA, MS)
*.vro MKV
Motion JPEG 640 x 480 8 AAC
*.mpg ASF
HE-AAC
*.mpeg MP4
Window Media Video v9 WMA
*.ts 3GP 6~30
DD+
*.tp VRO
MPEG2 MPEG
*.trp VOB
(MP3)
*.mov PS
DTS Core
*.flv TS 1920 x 1080 30 G.711
*.vob
(A-Law,
*.svi MPEG1 μ-Law)
*.m2ts
*.mts
*.divx

Otras restricciones
• El contenido del video no se reproducirá, o no se reproducirá correctamente, si hay un error en el contenido o en el
contenedor.
• El sonido y el video pueden no funcionar si el contenido tiene una velocidad de bits y de transferencia superior a la de
Marco/segundo relacionada en la tabla.
• Si hay un error en la tabla de índice, la función de Búsqueda (Saltar) no se admite.
• Algunos dispositivos de cámaras digitales/USB pueden no ser compatibles con el reproductor.
• Se puede mostrar el menú con demora si el video es de más de 10MBps (velocidad de bits).

Decodificador de video Decodificador de audio

●● Admite hasta H.264, nivel 4.1 ●● WMA 10 Pro admite hasta 5.1 canales y el perfil M2. (El modo
●● H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 y AVCHD no se LBR de M0 no se admite)
admiten. ●● El audio WMA Lossless no se admite.
●● No se admite GMC.

Fotos

Visualización de una foto (o presentación)


1. Pulse el botón ◄/►/▲/▼ para seleccionar la foto que desee de la lista de archivos.
2. Pulse el botón ENTERE.
✎✎Durante la presentación, se mostrarán todos los archivos de la lista de archivos en orden.
✎✎Cuando pulsa el botón � (Reproducir) en la lista de archivos, la presentación comenzará de inmediato.
✎✎Durante la presentación, puede ajustar la velocidad de la presentación usando el botón π (REW) o μ (FF).
✎✎No puede pasar a otro archivo usando el botón ◄ o ►.
✎✎Los archivos de música se pueden reproducir automáticamente durante la presentación si se configura Música de
fondo activ.
■■ Formatos de foto admitidos

Extensión del archivo Tipo Resolución


*.jpg JPEG 15360 X 8640
*.bmp BMP 1920 X 1080
*.mpo MPO 15360 X 8640

26 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 26
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:22
Música

05 Funciones avanzadas
Reproducción de música
1. Pulse el botón ◄/►/▲/▼ para seleccionar la Música que desee de la lista de archivos.
2. Pulse el botón ENTERE o el botón � (reproducir).
–– Puede usar los botones � (REW) y µ (FF) durante la reproducción.

✎✎Sólo se muestran los archivos que tengan la extensión de música compatible. Los archivos con otras extensiones no se
muestran, aunque se hayan guardado en el mismo dispositivo USB.
✎✎Si al reproducir archivos de música, el sonido no se oye correctamente, ajuste el Ecualizador en el menú Sonido. (Un
archivo de música demasiado modulado puede ocasionar problemas de sonido.)
✎✎Uso del menú de reproducción
–– Pulse el botón ▲/▼ para seleccionar el grupo deseado.
• Reprod. / Pausa: Puede iniciar o detener una canción. Como alternativa, el botón ∂ o ∑ en el control
remoto.
• Modo de repetición (Apagado / Una canc / Todo): Puede reproducir archivos de música en forma repetida.
• Modo Aleatorio (Apagado / Encendido): Puede reproducir la música al azar.
• Sonido Modo (Normal / Música / Película / Voz clara / Amplificar): Puede ajustar la configuración del sonido.
■■ Formatos de música admitidos

Extensión del archivo Tipo Códec Comentario


*.mp3 MPEG MPEG1 Audio Layer 3
*.m4a
*.mpa
MPEG4 AAC
*.aac
*.3ga
*.flac FLAC FLAC ●● La búsqueda no se admite. Admite hasta 2 canales.

*.ogg OGG Vorbis ●● Admite hasta 2 canales.


●● WMA 10 Pro admite hasta 5.1 canales y el perfil M2. (El
*.wma WMA WMA
modo LBR de M0 no se admite)

¦¦ Funciones adicionales de los contenidos multimedia

Reproducción de los archivos de Video/Música/Fotos seleccionados


1. Pulse el botón TOOLS en cada pantalla principal y seleccione Reprod. de sel..
2. Seleccione los archivos deseados.
✎✎ La marca de verificación aparece a la izquierda de los archivos seleccionados.
3. Pulse el botón ► para seleccionar Reprod., luego pulse el botón ENTERE.
✎✎Puede seleccionar o deseleccionar todos los archivos pulsando Seleccionar todo / Deseleccionar todos.

Español 27

[PE400-ZS]BN68-04363C.indb
Downloaded from 27
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:23
Funciones avanzadas
Menú de opciones de reproducción de videos/música/fotos
Durante la reproducción de un archivo, pulse el botón TOOLS.

Categoría Función Videos Fotos Música


Búsq por título Puede ir a otro archivo directamente. c
Puede buscar el video usando los botones ◄ y ► con un c
Búsq por tiemp intervalo de un minuto o ingresando el número directamente.
✎✎ Es posible que no se admita según la fuente de entrada.
Modo de repetición Puede reproducir archivos de película en forma repetida. c
Imagen Tamaño Puede ajustar el tamaño de la imagen según las preferencias. c
Modo de Imagen Puede ajustar la configuración de la imagen. c c
Sonido Modo Puede ajustar la configuración del sonido. c c
Puede cambiar el idioma del audio si el video tiene más de un c
Idioma de audio
idioma.
Subtítulos Puede activar o desactivar los subtítulos c
Puede reproducir los videos con subtítulos. Esta función sólo se c
Config. de subtítulos activa si los subtítulos tienen el mismo nombre de archivo que el
video.
Inic. vis. aut. / Detener c
Puede iniciar o detener una presentación.
presentacion
Puede seleccionar la velocidad de la presentación durante la c
Veloc.vis.aut
misma.
Música de fondo activ. / Puede configurar encendido/apagado de música de fondo para c
Música de fondo desact. ver una presentación.
Configuración de la música c
Puede seleccionar música de fondo para ver una presentación.
de fondo
Zoom Puede ampliar las imágenes en el modo de pantalla completa. c
Girar Puede girar las imágenes en el modo de pantalla completa. c
Puede editar la lista de reproducción cuando reproduce la c
Ed. lista rep.
música deseada.
Reprod. de sel. Selecciona y reproduce múltiples archivos. c
Información Puede ver información detallada acerca del archivo reproducido. c c c

28 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 28
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:23
Otra información
Instalación del montaje de pared

06 Otra información
Montaje en pared o techo
Se debe instalar el producto en una pared o techo sólo según la recomendación del fabricante. A menos
que se instale correctamente, el producto puede deslizarse o caerse, provocando lesiones graves a niños o
adultos, y daños importantes en el producto.
Instalación del kit de montaje de pared
El kit de montaje de pared (se vende por separado) le permite instalar el televisor en una pared.
Si desea más información sobre la instalación del montaje de pared, consulte las instrucciones que se facilitan con dichos
elementos. Si necesita ayuda con la instalación del soporte de pared, póngase en contacto con un técnico. Samsung
Electronics no se hace responsable de los daños causados al producto o al usuario si éste ha efectuado la instalación del
televisor.

Especificaciones del kit de montaje de pared (VESA)


✎✎El kit de montaje de pared se vende por separado.
Instale el montaje de pared en una pared sólida, perpendicular al suelo. Para colocarlo en otros materiales de construcción,
póngase en contacto con el distribuidor más cercano. Si instala el televisor en el techo o en una pared inclinada, puede caerse
y causar graves lesiones personales.
✎✎NOTA
xxLas dimensiones estándar de los kits de montaje de pared se muestran en la tabla que sigue.
xxAl adquirir el kit de montaje de pared, también se distribuye un manual de instalación detallado y todas las piezas
necesarias para el montaje.
xxNo use tornillos que no cumplan las especificaciones de tornillos estándar VESA.
xxNo use tornillos con una longitud superior a la medida estándar o que no cumplan con especificaciones de tornillos
estándar VESA. Los tornillos que sean demasiado largos pueden causar daños en el interior del televisor.
xxPara montajes de pared que no cumplen las especificaciones de tornillos estándar VESA, la longitud de éstos puede
variar dependiendo de las especificaciones del montaje de pared.
xxNo apriete excesivamente los tornillos; esto puede provocar daños en el producto o hacer que el producto se caiga y
causar lesiones. Samsung no se hace responsable de este tipo de accidentes.
xxSamsung no se hace responsable de daños o lesiones personales cuando se usa un montaje de pared que no cumple
las especificaciones VESA o si el cliente no sigue las instrucciones de instalación del producto.
xxNo monte el televisor con una inclinación de más de 15 grados.
xxSiempre son necesarias dos personas para montar el televisor en la pared.
Tamaño del Especificaciones
Tornillo
Familia de producto televisor en VESA (A * B) en Cantidad
estándar
pulgadas milímetros
43~51 400 X 400
TV PDP M8 4
60~64 600 X 400

✎✎Retire los tornillos de los orificios de montaje antes de instalar el montaje de pared.
No instale el equipo de montaje de pared mientras el televisor está encendido. Se podría
producir una descarga eléctrica con riesgo de causar lesiones personales.

Español 29

[PE400-ZS]BN68-04363C.indb
Downloaded from 29
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:24
Otra información
Fijación del televisor a la pared
Precaución: Tirar del televisor, empujarlo o colgarse de él puede provocar su caída. En especial, procure que los niños no se cuelguen
del televisor ni lo desestabilicen, ya que el televisor podría caerse sobre ellos y causarles lesiones graves o incluso la muerte. Siga
las precauciones de seguridad del folleto de seguridad incluido con el producto. Para mejorar la estabilidad instale un dispositivo
antivuelco, como se explica a continuación.

¦¦ Para impedir que el televisor se caiga


1. Coloque firmemente las grapas sobre la pared con los tornillos.
Confirme que los tornillos se hayan instalado firmemente en la
pared.
✎✎Según el tipo de pared quizás necesite algún material
adicional para el anclaje.
✎✎Dado que las grapas, los tornillos y la cadena necesarios
no se suministran con el producto, deberá adquirirlos por
separado.
2. Quite los tornillos de la parte central posterior del televisor,
colóquelos en las grapas y luego vuelva a ajustar los tornillos en el
televisor.
✎✎Los tornillos pueden no suministrarse con el producto. En ese
caso, compre tornillos de las siguientes especificaciones.
✎✎Especificaciones de tornillos
• Para un TV PDP de 43 ~ 64 pulgadas: M8
3. Conecte las grapas unidas al televisor y las grapas unidas a la
pared con una cadena fuerte y ténsela firmemente.
✎✎NOTA
• Instale el televisor cerca de la pared para evitar que se
caiga hacia atrás.
• Las grapas de la pared deben estar a la misma o a menor
altura que las grapas del televisor.
• Cuando desee mover el televisor deberá desatar la
cadena.
4. Verifique que todas las conexiones estén bien aseguradas.
Compruébelas periódicamente para detectar cualquier signo
de fatiga o falla. Si tiene alguna duda sobre la seguridad de sus
conexiones, comuníquese con un instalador profesional.

Bloqueo antirrobo Kensington


Samsung no suministra el Bloqueo antirrobo Kensington. Es un dispositivo que se utiliza para fijar físicamente el sistema
cuando se utiliza en un sitio público. El aspecto y el método de bloqueo puede diferir de la ilustración que sigue según el
fabricante. Consulte el manual proporcionado con el bloqueo Kensington para obtener más información sobre el uso correcto.
✎✎Busque un icono “K” en la parte posterior del televisor. Junto al icono “K” hay una ranura Kensington.
✎✎La posición y el color pueden variar según el modelo.
Para bloquear el producto, siga estos pasos:
1. Enrolle el cable del bloqueo Kensington en un objeto estático
voluminoso, como una mesa o una silla,
2. Deslice el extremo del cable que tiene el cierre a través del extremo
enrollado del cable de bloqueo Kensington.
3. Inserte el dispositivo de bloqueo en la ranura Kensington del
producto.
4. Cierre el bloqueo.
✎✎Estas instrucciones son de carácter general. Para obtener <Opcional>
instrucciones más exactas, consulte el Manual del usuario
suministrado junto con el dispositivo de bloqueo.
✎✎El dispositivo de bloqueo debe adquirirse en forma separada.
✎✎La ubicación de la ranura Kensington puede variar según el
modelo del televisor.

30 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 30
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:25
Solución de problemas
Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones. Si ninguna de

06 Otra información
estas sugerencias de solución de problemas funciona, visite “www.samsung.com”, y haga clic en Soporte técnico o llame al
centro de atención al cliente de Samsung.
Problemas Soluciones y explicaciones
Imagen deficiente En primer lugar, realice la Prueba de imagen para confirmar que el televisor muestre correctamente la
imagen de prueba.
●● Vaya a MENU - Soporte técnico - Autodiagnóstico - Prueba de imagen
Si la imagen de la prueba se muestra correctamente, la imagen deficiente puede provenir de la fuente o de
la señal.
La imagen del televisor no se ve ●● Si tiene un receptor de cable/satélite analógico, cambie a un receptor digital superior. Utilice cables HDMI o
tan bien como en la tienda. de componentes para conseguir la mejor calidad de imagen de definición estándar (SD).
●● Suscriptores de cable/satélite: Pruebe con las emisoras digitales en la oferta de canales.
●● Conexión de antena de aire/cable: Pruebe las emisoras digitales después de realizar la programación
automática.
●● Ajuste la resolución de la salida de video del receptor de cable o satélite en 480p.
La imagen se ve distorsionada: ●● La compresión de los contenidos de video puede causar imágenes distorsionadas especialmente en las
error de macrobloques, escenas de movimiento rápido, como en los deportes y las películas de acción.
microbloques, puntos, ●● El bajo nivel de señal puede causar distorsión de la imagen. Este no es un problema del televisor.
pixelización. ●● Los teléfonos móviles utilizados cerca del televisor (hasta 0,9 mts) pueden causar ruido en la imagen en un
televisor analógico y digital.
El color es de mala calidad o ●● Si utiliza una conexión de componentes, compruebe que los cables de los componentes estén conectados
falta. en las entradas correctas. Las conexiones incorrectas o sueltas pueden originar problemas o que la pantalla
se quede en blanco.
El color o el brillo es de mala ●● Ajuste las opciones de Imagen en el menú del televisor. (vaya a Modo de Imagen / Color / Brillo /
calidad. Definición)
●● Ajuste la opción Ahorro de energía en el menú del televisor (vaya a MENU - Sistema - Solución Eco -
Ahorro de energía)
●● Intente reiniciar la imagen para ver la configuración de imagen predeterminada. (vaya a MENU - Imagen -
Restablezca imagen)
Hay una línea de puntos en el ●● Si el tamaño de la imagen está establecido en Ajuste pantalla, cámbielo a 16:9.
borde de la pantalla. ●● Cambie la resolución del receptor de cable/satélite.
La imagen se ve sólo en blanco ●● Si está utilizando una entrada mixta AV, conecte el cable de video (amarillo) en el conector Verde de la entrada
y negro. 1 de Componente del televisor.
Al cambiar de canal, la imagen ●● Si está conectado a un receptor de cable, pruebe reiniciarlo. Vuelva a conectar el cable de CA y espere hasta
se congela o se ve distorsionada que el receptor de cable se reinicie. Puede tardar unos 20 minutos.
o aparece con retraso. ●● Establezca la resolución de salida del receptor de cable en 480p.
Problemas de sonido Primero, realice la Prueba de sonido para determinar si el audio de su televisor funciona correctamente.
(Vaya a MENU - Soporte técnico - Autodiagnóstico - Prueba de sonido)
Si el audio es correcto, el problema del sonido puede provenir de la fuente o la señal.
No hay sonido o se oye ●● Compruebe el volumen del dispositivo (receptor de cable/satélite, DVD, Blu-ray, etc.) conectado al televisor.
demasiado bajo con el volumen
al máximo.
La imagen es buena pero no ●● Si utiliza un dispositivo externo, compruebe que la opción de salida de audio del dispositivo (por ejemplo,
hay sonido. quizás deba cambiar la opción de audio del receptor de cable a HDMI si tiene conectado HDMI al televisor).
●● Reinicie el dispositivo conectado volviendo a conectar el cable de alimentación del dispositivo.
Los altavoces hacen un ruido ●● Compruebe las conexiones de los cables. Asegúrese de que no haya un cable de video conectado a una
inapropiado. entrada de audio.
●● Para la conexión de la antena o el cable, compruebe la potencia de señal. El bajo nivel de señal puede causar
distorsión del sonido.
●● Realice la Prueba de sonido como se explicó anteriormente.

Español 31

[PE400-ZS]BN68-04363C.indb
Downloaded from 31
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:25
Otra información
Problemas Soluciones y explicaciones
No hay imagen, no hay video
El televisor no enciende. ●● Compruebe que el cable de alimentación CA esté bien conectado en la toma de la pared y en el televisor.
●● Asegúrese de que la toma de pared funcione.
●● Pruebe pulsar el botón POWER del televisor para asegurarse de que el problema no esté en el control
remoto. Si el televisor se enciende, consulte la sección "El control remoto no funciona" a continuación.
El televisor se apaga ●● Compruebe si la opción Temporizador está establecida en Apagado en el menú Sistema.
automáticamente. ●● Compruebe que el cable de alimentación CA esté bien conectado en la toma de la pared y en el televisor.
●● Cuando se ve la televisión con una conexión de antena o cable, el televisor se apaga tras 10-15 minutos si no
hay señal.
No hay imagen ni video. ●● Compruebe las conexiones de los cables. (desconecte y vuelva a conectar todos los cables del televisor y de
los dispositivos externos.)
●● Establezca la salida de video del dispositivo externo (receptor de cable/satélite, DVD, Blu-ray, etc.) de modo
que coincida con las conexiones de la entrada del televisor. Por ejemplo, si la salida de un dispositivo externo
es HDMI, se debe conectar a una entrada HDMI en el televisor.
●● Compruebe que los dispositivos externos estén encendidos.
●● Asegúrese de seleccionar la fuente correcta del televisor pulsando el botón SOURCE del control remoto.
●● Reinicie el dispositivo conectado volviendo a conectar el cable de alimentación del dispositivo.
Conexión de la antena (aire/cable)
El televisor no recibe todos los ●● Compruebe que el cable coaxial esté firmemente conectado.
canales. ●● Ejecute Prog. Automática. para añadir los canales disponibles a la lista de canales. Vaya a MENU - Canal -
Prog. Automática. luego seleccione Automático y asegúrese de que en el menú esté establecido el tipo de
señal de televisión por cable correcto.
●● Compruebe la posición correcta de la antena.
No hay subtítulos en los canales ●● Compruebe el menú de configuración de los Subtítulos.
digitales. ●● Algunos canales no tienen datos de subtítulos.
La imagen se ve distorsionada: ●● La compresión de los contenidos de video puede causar imágenes distorsionadas especialmente en las
error de macrobloques, escenas de movimiento rápido, como en los deportes y las películas de acción.
microbloques, puntos, ●● Un nivel de señal bajo puede causar distorsión de la imagen. Este no es un problema del televisor.
pixelización.
Otros
Barras horizontales rodantes de ●● Desconecte los terminales de audio izquierdo y derecho del receptor de satélite. Si los zumbidos cesan, esto
color púrpura/verde y zumbidos indica que el receptor de satélite tiene un problema en la conexión a tierra. Sustituya los cables de video de
en los altavoces del televisor componentes por una conexión HDMI.
con la conexión del cable de
componentes.
La imagen no se muestra en la ●● En cada lado se muestran barras negras en los canales de alta definición (HD) cuando se muestran
pantalla completa. contenidos SD mejorados (4:3).
●● Aparecerán barras negras en las partes inferior y superior cuando se vean películas que tienen diferentes
formatos que el televisor.
●● Ajuste la opción del tamaño de imagen del dispositivo externo o del televisor al modo de pantalla completa.

32 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 32
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:25
Problemas Soluciones y explicaciones
El televisor de plasma hace un ●● Los televisores de plasma por lo general hacen un zumbido suave. Esto es normal. Este zumbido es

06 Otra información
ruido. producido por las cargas eléctricas que se utilizan para crear las imágenes en la pantalla.
●● Si el zumbido es fuerte, es posible que haya ajustado el brillo en el televisor demasiado alto. Pruebe configurar
el brillo más bajo.
●● También puede escuchar un zumbido fuerte si la parte trasera de su TV de plasma está demasiado cerca de
una pared o de otra superficie dura. Además, intente volver a enrutar sus cables de conexión.
●● La instalación inadecuada del montaje de pared puede generar demasiado ruido.
Problema de retención de ●● Para minimizar la posibilidad de desgaste de pantalla, esta unidad está equipada con tecnología de reducción
imágenes (desgaste). de desgaste de pantalla Cambio de píxel. Cambio de píxel le permite configurar la imagen para que se mueva
ligeramente hacia arriba y hacia abajo (línea vertical) y de lado a lado (punto horizontal). El movimiento leve
regular de la imagen reduce el desgaste de la pantalla.
El control remoto no funciona. ●● Coloque las pilas del control remoto con los polos (+/–) en la dirección correcta.
●● Limpie la ventana de transmisión del sensor en el control remoto.
●● Apunte con el control remoto directamente al televisor desde una distancia de 1,5 - 2 metros.
El control remoto del receptor ●● Programe el control remoto del receptor de cable/satélite para que haga funcionar el televisor. Consulte el
de cable/satélite no enciende manual del usuario del receptor de cable/satélite para conocer el código del televisor Samsung.
ni apaga el televisor, ni ajusta el
volumen.
Aparece un mensaje de “Modo ●● Compruebe la resolución que admite el televisor y ajuste en consecuencia la resolución de salida del
no compatible”. dispositivo externo.
Subtítulo en el menú del ●● Subtítulo no se puede seleccionar en el menú del televisor cuando está conectado mediante HDMI o
televisor aparece atenuado. Componente.
●● Se debe activar Subtítulo en el dispositivo externo.
Se advierte un olor a plástico ●● Este olor es normal y desaparece con el tiempo.
que proviene del televisor.
La Información de señal del ●● Esta función sólo está disponible en los canales digitales que el televisor recibe de la conexión de Antena / RF
televisor no está disponible / Coaxial.
en el menú de Prueba
Autodiagnóstico.
El televisor está inclinado a la ●● Retire la base del soporte del televisor y vuelva a montarla.
derecha o a la izquierda.
El menú Canal se ve atenuado ●● El menú Canal sólo está disponible cuando está seleccionada la fuente TV.
(no disponible).
La configuración se pierde ●● Si el televisor está en el modo Demo comercio, la configuración del audio y la imagen se restablecerá cada
después de 30 minutos o cada 30 minutos. Cambie la configuración del modo Demo comercio a Uso domiciliario con el procedimiento
vez que se apaga el televisor. Configuración (Configuración inicial). Pulse el botón SOURCE para seleccionar el modo TV, vaya a MENU
→ Sistema → Configuración (Configuración inicial) → ENTERE.
Pérdida intermitente de audio o ●● Compruebe las conexiones de los cable y vuelva a conectarlas.
video. ●● La pérdida de audio o video se puede deber a que los cables son demasiado rígidos o gruesos. Asegúrese
de que los cables queden lo suficientemente flexibles para un uso prolongado. En un montaje de pared del
televisor, es aconsejable utilizar cables con conectores de 90 grados.
Ve pequeñas partículas cuando ●● Esto es una particularidad del diseño del producto y no es un defecto.
mira de cerca el borde del marco
del televisor.
Aparece POP (anuncio de ●● Seleccione Uso domiciliario en el modo Configuración. Para obtener información, consulte la función
rótulo interno del televisor) en la Configuración (Configuración inicial).
pantalla.
Aparece el mensaje ●● Puede aparecer debido a una elevada velocidad en bits de los contenidos El contenido generalmente se
“Posiblemente este archivo no reproducirá, aunque puede experimentar problemas de funcionalidad,
se rep. corr.”.

Español 33

[PE400-ZS]BN68-04363C.indb
Downloaded from 33
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:26
Otra información
¦¦ Licencia

TheaterSound, SRS and symbol are trademarks of SRS Labs, Inc.


TheaterSound technology is incorporated under license from SRS Labs, Inc.

SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in speakers, while maintaining steady volume and
delivering rich bass and clear dialog.

Fabricado bajo licencia de Dolby Laboratories. Dolby y el símbolo de doble D son marcas comerciales de Dolby
Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents
issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device
that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete
your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Aviso de Licencias de Código Abierto


En el caso de utilizar software de código abierto, las Licencias de Código Abierto están disponibles en el menú del producto.
El Aviso de Licencias de Código Abierto está escrito sólo en inglés.

Almacenamiento y mantenimiento
✎✎Si ha pegado algunas pegatinas en la pantalla del televisor, al extraerlas quedarán restos. Limpie la pantalla
para ver televisión.
✎✎La parte exterior y la pantalla del producto podrían rayarse durante la limpieza. Asegúrese de limpiar el exterior
y la pantalla con cuidado utilizando el paño suministrado o un paño suave para evitar que se raye.

Limpie el producto con un paño suave humedecido


No rocíe agua directamente sobre el producto. Cualquier
con una pequeña cantidad de agua. No utilice líquidos
líquido que ingrese al producto puede ocasionar fallas,
inflamables (como benceno o solventes) ni agentes
incendio o descarga eléctrica.
limpiadores.

34 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 34
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:28
Especificaciones

06 Otra información
Consideraciones ambientales
Temperatura de funcionamiento
Humedad de funcionamiento 10°C a 40°C (50ºF a 104ºF)
Temperatura de 10% a 80%, sin condensación
almacenamiento -20°C a 45°C (-4ºF a 113ºF)
Humedad de almacenamiento 5% a 95%, sin condensación

Nombre del modelo PL43E400

Resolución de pantalla 852 X 480

Tamaño de pantalla 43 pulgadas

Consumo de energía
Funcionamiento normal 176W
Modo suspensión <1W

Sonido (Salida) 10W x 2

Dimensiones (An x Al x Pr)


Cuerpo principal 1010.1 X 621.0 X 56.0 mm
Con el soporte 1010.1 X 675.1 X 262.0 mm

Peso
Sin el soporte 14.1 kg
Con el soporte 15.3 Kg

✎✎El diseño y las especificaciones pueden cambiar sin previo aviso.


✎✎Para obtener información sobre la fuente de alimentación y el consumo de energía, consulte la etiqueta adherida al
producto.

Español 35

[PE400-ZS]BN68-04363C.indb
Downloaded from 35
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:28
Otra información
Índice

A Actualización del software 22 G Guía 13 T Temporizador 18


Admin. de programa 13 Tiempo 18
Antena 13 I Imagen Tamaño 14 Tono de Color 16
Autodiagnóstico 22 Inicio de contenido 11 Tono del negro 15

B Balance de blanco 15 L Lista de canales 11 U USB 23


Bloqueo de canales 19
Bloqueo antirrobo Kensington 30 M Modo de Imagen 14 V Videos 25
Modo de repetición 28

C Contraste dinámico 15 Modo Editar 12


Modo Juego 21

D Dinámico 14 Modo película 16


Media Play 23
E Ecualizador 17 Música 27
Edición de nombre de canal 12
Edit. favoritos 12 O Opciones difusión audio 17

F Favoritos 11 P Prog. Automática 14


Filtro dig. de ruido 16 Protección de pantalla 20
Fotos 26
S Seguridad 19
Sintonia Fina 14
Solo modo RGB 15
Solución Eco 19
Sonido Modo 17
Subtítulos 20

36 Español

[PE400-ZS]BN68-04363C.indb
Downloaded from 36
www.Manualslib.com manuals search engine 2012-03-27 �� 4:25:28

Potrebbero piacerti anche