Sei sulla pagina 1di 3

S/NO DESCRIPTION QTY UNIT RATE

FENCE WORKS
C Fabricate and fix steel grille 126 m²
comprises of 50mm square steel
pipe vertical members spaced @
120mm centers with 5no
horizontal members spaced @ 5m
centers complete with Electric
Wire (measured separately) at top
of fence to Engineer's Specs Spray
with anti-rust and finish with white
gloss paint

D Grade A Concertina electric wire 176 m


fixed in position on existing steel
grilles

One undercoat and two full coat of


Access Jasimine white paint CAPL
or other equal and approved
manufacturer
Cement rendered general surfaces
E girth exceeding 300mm 3,258 m²

F Ditto in copings 468 m

METAL WORK
Fabricate and install sliding Gate
comprises of 100mm galvanized
steel border 2no horizontal
member 100mm galvanized steel
finished with white gloss paint
18no vertical member 50mm
square steel pipe vertical
members spaced @ 120mm
centers spray paint with anti rust
and finish with wood finish varnish
including electric Wire at top of
gate to Engineer's Specs
G 6000 x 2400mm high metal gate 2 Nr

H 5000 x 2400mm high metal gate 1 Nr


AMOUNT

-
BALUSTRADES, HANDRAILS, ETC.
Mild Stee balustrade fixed to staircase 429 ln m
comprising: 1000M high metal rails of 40mm
diameter / 2mm thick galvanized steel top
handrail with 5 nos. Equally spaced 20mm
diameter / 2mm thick hollow steel
intermediary (horizontal) round pipes and
20mm diameter / 2mm thick hollow steel
start, end and centre vertical round posts
fitted with all necessary accessories ; 1014
mm high over all

Mild Steel Pipe Wall Handrail ; 547 ln m

TYPE 2 STAIRCASE
Mild steel framed staircase with; Open risers 9 No
(21 no. risers at 150mm), polished hardwood
treads with nosing groove and steel pipe
frame work spray painted with silver auto-
base finish (Balustrade and handrail mearued
elsewhere)

TYPE 3 STAIRCASE
Spiral Stair complete with tread 2 No
150x320x1000 overall with one end circular
on plan finished with appoved tile, 150mm
waist tapering to 75m; 200mm diameter
circular spine reinforced with 16mm-12mm
high tensile bar reinforcement (see Engineer`s
later drawings for details) and finished fair on
all exposed faces including balustrade.

Potrebbero piacerti anche