Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
B-2017
[Identical with AS TM S pecification B 468-04(R09) except that certification has been made mandatory. ]
requirements of this specification. include, but are not limited to, the following:
1.3 The values stated in inch-pound units are to be 5.1.1 Quantity (feet or number of lengths),
regarded as the standard. The values given in parentheses 5.1.2 UNS number,
are for information only.
5.1.3 S ize (outside diameter and minimum or aver-
1.4This standard does not purport to address all of age wall thickness),
the safety concerns, if any, associated with its use. It is 5.1.4 Length (random or specific),
the responsibility of the user of this standard to become
familiar with all hazards including those identified in the 5.1.5 AS TM designation,
appropriate Material Safety Data Sheet for this product/ 5.1.6 Product Analysis — S tate if required,
material as provided by the manufacturer, to establish 5.1.7 DELETED
appropriate safety and health practices, and determine the 5.1.8 Purchaser Inspection — S tate which tests or
applicability of regulatory limitations prior to use. inspections are to be witnessed, if any, and
3.1.1 Definitions for terms defined in Terminology Tubing of UNS N08024 alloy shall be furnished in the
B 899 shall apply unless otherwise defined by the require- annealed condition. Tubing of UNS N08026 alloy shall be
ments of this document. furnished in the solution-annealed condition.
668