Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1) Slide the right cover [1] in the direction of the arrow to detach.
- 1 screw [2]
F-1
F-2
Left Cover
F-3
1
Rear Right Cover
1) Rotate the rear right cover [1] in the direction of the arrow to detach.
F-4
1) Slide the upper right cover [1] in the direction of the arrow to detach.
- 1 screw [2]
F-5
Upper Cover
1) Slide the upper cover [1] in the direction of the arrow to detach.
- 4 screws [2]
F-6
2
Removing the Control Panel Assembly
Version:1.02
F-7
F-8
F-9
3
F-10
F-11
1) Slide the lower right cover [1] in the direction of the arrow to detach.
- 2 screws [2]
F-12
Be sure that the switch is kept in OFF position during disassembly work.
During assembly work, it may be a good idea to keep the switch in ON position to facilitate the work.
At the end of assembly, be sure to shift the switch back to OFF position until you are ready to check the operation of the machine.
4
- 2 claws [2]
F-13
2) Disconnect the 8 connectors [1], and remove the flat cable [2].
F-14
F-15
F-16
5
F-17
When mounting the engine controller assembly, be sure to fit the switch link [1] to the link holder [2].
1) Slide the flat cable [1] and the flat cable guide [2] in the direction of the arrow to detach
- 1 claw [3]
F-18
F-19