Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
08
ENGINES 541.9 in MODEL 930, 932, 933, 934, 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2
ENGINES 542.9 in MODEL 930, 932, 934, 950.0 /1 /2, 952.0 /1 /2 /3, 954.0 /1 /2
1 Threaded cap
2 Sealing ring
3 Oil filter element
4 Oil drain screw
5 Oil dipstick guide tube
6 Engine oil extractor
7 Cap
N18.00-0277-06
Modification notes
10.12.07 Notes on oil pan versions added. Step 6 AH01.45-W-0002-01A
Lowering
Danger! Risk of injurycaused by body parts being Ensure that no one is within the tilting range AS60.80-Z-0001-01A
pinched or crushed as cab is tilted of the cab as it is being tilted. Always tilt the
cab all the way to the end position and
secure with the safety strut.
1 Tilt cab
Notes on tilting the cab AH60.80-N-0003-01A
2 Replace oil filter element (3) On vehicles without code (MY8) Engine oil AP18.20-W-0100-04A
change interval at 150,000 km
*BA18.20-N-1001-01C
On vehicles with code (MY8) Engine oil AP18.20-W-0100-04C
change interval at 150,000 km
*BA18.20-N-1001-01C
3 Detach cap (7) on oil filler neck
4.1 Pull oil dipstick out of the oil dipstick guide Extract engine oil only when the engine
tube (5), suction off the engine oil through is at normal operating temperature.
the oil dipstick guide tube (5) and insert the Observe the operating instructions provided
oil dipstick into the oil dipstick-guide tube (5) by the manufacturer of the engine oil
extractor.
Engine oil extractor,
refer to GOTIS
http://gotis.aftersales.mercedes-benz.com
4.2 Drain engine oil from the oil drain screw (4) Only drain engine oil when engine is at
and tighten the oil drain screw (4) normal operating temperature.
It is absolutely essential to maintain the
tightening torque otherwise the oil pan may
be damaged.
Install new seal for oil drain screw (4).
*BA01.45-N-1002-01C
Filling
5 Check adjusted oil quality in Telligent
servicing system and adjust the quality of
the engine oil to be poured in if necessary
6 Pour in the specified filling capacity of *BF18.00-N-1001-01B
engine oil at the oil filler neck
Notes on engine oil AH18.00-N-0101-01B
© Daimler AG, 7/9/09, G/06/09 / ap18.00-w-0101a / Engine oil and filter change Page 1/6
ENGINES 541.9 in MODEL 930, 932, 933, 934, 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 ENGINES 542.9 in MODEL 930, 932, 934, 950.0 /1 /2, 952.0 /1 /2 /3, 954.0 /1 /2
Notes on oil pan versions AH01.45-W-0002-01A
7 Install cap (7) on oil filler neck
Checking
Danger! Risk of accident caused by vehicle starting Secure vehicle to prevent it from moving by AS00.00-Z-0005-01A
off by itself when engine is running.Risk of itself.
injury caused by contusions and burns Wear closed and snug-fitting work clothes.
during starting procedure or when working Do not touch hot or rotating parts.
near the engine as it is running
8 Start engine, allow it to run for 1 to 2 min at Observe oil pressure gauge. It must
idle speed and then switch off engine indicated oil pressure after a few seconds.
Do not rev up engine as long as no oil
pressure is indicated.
9 After a waiting time of approx. 5 minutes The waiting time must be maintained.
check oil level on the display, and correct
the oil level if necessary
Model 950, 952, 953, 954 AP18.00-W-0101-07A
up to vehicle identification end no. 471229
Model 950, 952, 953, 954 AP18.00-W-0101-07B
as of vehicle identification end no. 471230
MODEL 930, 932, 933, 934 AP18.00-W-0101-07D
10 Fill up reservoir of automatic engine oil Vehicle with code (MB7) automatic engine
replenishment up to the maximum marking oil replenishment
*BF18.46-N-1001-01A
11 Check oil filter housing and if necessary
check oil drain screw (4) for leaks
Danger! Risk of injurycaused by body parts being Ensure that no one is within the tilting range AS60.80-Z-0001-01A
pinched or crushed as cab is tilted of the cab as it is being tilted. Always tilt the
cab all the way to the end position and
secure with the safety strut.
12 Tilt cab back into driving position
Notes on tilting the cab AH60.80-N-0003-01A
Oil pan
BA01.45-N-1002-01C Oil drain screw to oil pan Light alloy M20 1.5 Nm 65 65
M22 1.5 Nm 70 70
M26 1.5 Nm 80 80
M26 1.5 Nm 50 50
with valve
Oil filter
Engine lubrication
© Daimler AG, 7/9/09, G/06/09 / ap18.00-w-0101a / Engine oil and filter change Page 2/6
ENGINES 541.9 in MODEL 930, 932, 933, 934, 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 ENGINES 542.9 in MODEL 930, 932, 934, 950.0 /1 /2, 952.0 /1 /2 /3, 954.0 /1 /2
Number Designation Engine Engine
541.9 without code 541.9 without code
MN9, MY8, without MN9, MY8, with code
code MS4/5 with light- MS4/5 with light-alloy
alloy oil pan oil pan
Sheet BB00.40-P-0228-01A -
Engine lubrication
Sheet - BB00.40-P-0228-01A
Engine lubrication
Sheet - BB00.40-P-0228-01A
© Daimler AG, 7/9/09, G/06/09 / ap18.00-w-0101a / Engine oil and filter change Page 3/6
ENGINES 541.9 in MODEL 930, 932, 933, 934, 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 ENGINES 542.9 in MODEL 930, 932, 934, 950.0 /1 /2, 952.0 /1 /2 /3, 954.0 /1 /2
See fig. AH01.45-W-0002-01A AH01.45-W-0002-01A
Engine lubrication
Fluids
Sheet BB00.40-P-0228-01A -
Engine lubrication
Sheet - BB00.40-P-0228-01A
Engine lubrication
© Daimler AG, 7/9/09, G/06/09 / ap18.00-w-0101a / Engine oil and filter change Page 4/6
ENGINES 541.9 in MODEL 930, 932, 933, 934, 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 ENGINES 542.9 in MODEL 930, 932, 934, 950.0 /1 /2, 952.0 /1 /2 /3, 954.0 /1 /2
Sheet BB00.40-P-0228-01A -
Engine lubrication
Sheet - BB00.40-P-0228-01A
Engine lubrication
Sheet BB00.40-P-0228-01A -
Engine lubrication
© Daimler AG, 7/9/09, G/06/09 / ap18.00-w-0101a / Engine oil and filter change Page 5/6
ENGINES 541.9 in MODEL 930, 932, 933, 934, 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 ENGINES 542.9 in MODEL 930, 932, 934, 950.0 /1 /2, 952.0 /1 /2 /3, 954.0 /1 /2
Specifications for Operating Sheet BB00.40-P-0228-05A BB00.40-P-0228-05A
Fluids
Sheet BB00.40-P-0228-01A -
© Daimler AG, 7/9/09, G/06/09 / ap18.00-w-0101a / Engine oil and filter change Page 6/6
ENGINES 541.9 in MODEL 930, 932, 933, 934, 950.0 /1 /2 /3, 952.0 /1 /2 /3, 953.1 /3, 954.0 /1 /2 ENGINES 542.9 in MODEL 930, 932, 934, 950.0 /1 /2, 952.0 /1 /2 /3, 954.0 /1 /2