Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
PROSPRAY PS3.21
Technical Data : Standard Package :
● Motor output : 0.65 kW
● Voltage : 230V/50Hz
● Weight : 16 kg
● Max. delivery rate : 2.0 l/min
● Max. nozzle size : 0.023“ (0.584 mm) Airless gun AG 08
Coating Materials :
Release agents, Undercoats and primers, Fillers, Synthetic
resin-based Paints, Acrylic paints, Anti-corrosive agents, 2K Component Product :
Materials, Emulsions, Latex paints, Flame retardants , Fabric
● ProSpray 3.21 basic unit on stand
adhesive, Airless fillers
● HP hose DN6, 27 MPa, 1/4“, 15 m, yellow
Application Area : ● Airless gun AG 08, 25 MPa, incl. TradeTip
Article No Description 3 nozzle holder
Doors, Frames, Windows, Radiators, Steel structures, Wall and
WG0003352 PS3.21 SKID 230V, EXPORT ● 2SpeedTip nozzle D10 111/419
ceiling, Interior finishing, Protective Coating and Objects
0558032
PROSPRAY PS3.34
Technical Data :
● Motor output : 0.94 kW
Standard Package :
● Voltage : 230V/50Hz
● Weight : 43 kg
● Max. delivery rate : 4.5 l/min
● Max. nozzle size (1 gun) : 0.034“ (0.863 mm)
Airless gun AG 08
● Max. nozzle size (2 guns) : 0.023“ (0.584 mm)
Coating Materials :
Release agents, Undercoats and primers, Fillers, Synthetic
resin-based Paints, Acrylic paints, Anti-corrosive agents, Component Product :
2K Materials, Emulsions, Latex paints, Flame retardants , ● ProSpray 3.34 basic unit on trolley
Fabric adhesive, Airless fillers
● HP hose DN6, 27 MPa, 1/4“, 15 m, yellow
Application Area : ● Airless gun AG 08, 25 Mpa, incl. TradeTip
Doors, Frames, Windows, Radiators, Steel 3 nozzle holder
Article No Description structures, Wall and ceiling, Interior finishing, ● 2SpeedTip nozzle D20 115/421
WG0003278 PS3.34 HR, 230V, EXPORT 0558039 Protective Coating and Objects
HEAVYCOAT HC950E
Technical Data : Standard Package :
● Motor output : 3.6 kW
● Voltage : 230 V
● Weight : 83 kg
● Max. Pressure : 25 MPa
● Max. delivery rate : 6.6 l/min Airless gun AG 14
● Max. nozzle size : 0.052“
Component Product :
● HeavyCoat 950 230 V, basic unit
● HP hose DN10, 25 MPa, 3/8”, 15 m
● Connector I = 1/4” x A = 3/8”
● Airless gun AG 14, NPS 1/4”, incl. TradeTip 3
*Convertokit, 4.8 Hp, Honda, gasoline - 0290614A ● Nozzle holder, F-thread
Coating Materials & Application Area :
Indoor : Large interior wall surfaces requiring a high level of productivity and surface coverage power: e.g.
primers, latex paints, emulsions and all other water diluted and solvent based materials, Application of fill-
ers (airless spray fillers) and Flame proofing.
Outdoors : Exterior wall surfaces, Roof coatings, Thick coating materials, Bituminous paints
Article No Description Corrosion proofing, Inorganic zinc and micaceous iron paints , Basement sealants.
10028237 HEAVYCOAT HC950E 0528505 Others : Fabric and other adhesives.
Wagner Contractor
PLASTCOAT PC 25
Technical Data :
● Motor rating : 2,2 kW
● Voltage : 230V/50Hz
● Max. delivery rate : 10/15/20 l/min*
● Max. delivery radius : 40 m
● Delivery height : 20 m
● Weight : 85 kg
● Max. grain size : 5 mm
● Working pressure : 40 bar
Component Product :
● Pump casing W10/3, yellow
● Pump worm W10/3, Ø = 40 mm, L = 320 mm
● Tool box complete for PlastCoat
Coating Materials :
Synthetic resin / plasters onto concrete, Coarse fibre paints, Porous concrete coatings Resins and fillers, Roller and filling render, Bitumen sealer , Synthetic resin
/ reinforcement filler & plasters, Synthetic resin plasters up to K4 / K5, Bonded thermal insulation system adhesive / filler, Renovation plaster, Mineral renders,
Reinforcing stopper
Application Area :
Indoor : Smoothing the surfaces of ceilings and brickworks, Rendering ceilings and wall surfaces in rooms and stairways and Applying spray plaster.
Outdoor : Thermal insulation work, Concrete restoration and water-proofing work and Brickwork restoration.
Article No Description
WG0002674 PC25 PLASTCOAT S PACK W/O COMP 0348030
LINECOAT LC 840
Technical Data :
● Engine rating : 4 kW / 5,5 PS
● Max. delivery rate : 8.2 l/min
● Max. Spraying Speed : 188 m/Min (11.3 km/h)
● Max.nozzle size : 1 gun 0.048“ (1.219 mm)
2 guns 0.033“ (0.838 mm)
● Line Width : 5 up to 60 cm
● Weight : 111 kg
● Electrical System : 50 W / 12 V
● Pump drive : Hydraulic
● Max. dynamic pressure : 23 MPa (230 bar)
● Max. delivery rate : 8.2 l/min
Component Product :
● Airless gun AG 08, special
● 2nd gun connection complete
● HP hose DN6, 27 MPa, 1/4“, 15 m, yellow
● TradeTip 2 nozzle holder
● TradeTip 2 nozzle LineFinish 1708
Application Area :
Making, remaking and maintaining lines and markings
Article No Description
WG0002681 LC840 LINE COAT SPRAY PACK 0555145 Communal areas :
Roads, Parking areas, Sports areas, Airports and Storage halls
Wagner Industrial Powder
Field of application/Remarks :
Standard level (red) : For poorly rechargeable types of powder, For high powder
application, For high application effectiveness., This setting corresponds to the usual
Wagner high-voltage modules and control units.
Medium level (blue) : For small surfaces, For well rechargeable types of powder, For
metal powder, To reduce the effects of overcoating such as craters and orange peel,
Increasing the open-circuit voltage allows for a greater distance between the spray gun
and the workpiece while maintaining sufficient powder charging.
Soft level (black) : For very well rechargeable types of powder. For small powder
Manual Prima Sprint X1 Container 60ltr
application and For post-coatings.
Article No Description
Article No Description
10002885 MANUAL PRIMA SPRINT X1 F-60LT 2329489
10025920 PRIMA SPRINT X1 WITH CONTAINER 60LT
WG003250 264268 CONTAINER 60LTR
Component Product :
● Controler EPG Sprint X
● Mains cable + Stak 200
● Earthing cable assy. 10m
● Manual Spray Gun PEM-X1 Flat
● Powder injector PI-F1
● Earthing flex
● Union with push in nipple
Technical data PEM-X1 : Technical data EPG-Sprint X : ● Coupling union
● Length : 335 mm/ 13 inch ● Length : 270 x 260 x 136 mm ● Powder hose set D11, 5m
● Weight : 490 g/ 17 oz (10.6 x 10.2 x 5.3 in.)
● ATEX-Certification : PTB 12 ATEX 5002 EN50050-2 ● Weight : 4,6 kg Article No Description
● Powder output : 450 g (16 oz) /min. ● Type : 0102 II 3(2) D IP 64 80° 10002886 COMPONEN PRIMA
● ATEX-Certification : PTB 102 II D T (Zone 4) SPRINT X1 F 2331090
The advantages at a glance: The advantages at a glance:
● Highest precision because of WAGNER Air Flow ● Lightweight with only 490g
Control (AFC) ● Well-balanced ergonomics
● Intuitive use ● Integrated remote control for quick adjustment of the
● Intelligent control technology powder amount
● Up to 50 coating programs for highest quality and ● New nozzle concept with a sliding ring for perfect
reproducibility adjustable powder spray pattern
● Logical arrangement of the different control parts ● Changed colour schema
Wagner Industrial Liquid
COBRA 40-10 HIGH-PRESSURE DIAPHRAGM PUMPS
Technical Data :
● Pump ratio : 40 :1 Standard Package :
● Material inlet : M–M 36x2
● Material outlet : M–G 3/8‘‘ AIRCOAT
● Material temperature : 10 - 80 °C, 50.0 - 176.0 °F
● Air inlet pressure : 2,5 – 6,0 bar, 36 – 87 PSI
● Max. material pressure at pump inlet : 20 bar, 290 PSI
● Air inlet connection : F–G 1/2‘‘
● Operating pressure : 250 bar, 3626 PSI
● Volumetric flow per double stroke : 10 cm³/DS, 0,61 in³/DH
● Ambient temperature : 10 – 60 °C, 50 – 140 °F GM 4100AC
● Weight : 19,0 kg, 41.9 lb
● Max. sound level : 74 dB(A)
● Material pH : 3,5 – 9,0 pH ● GM 4100AC 25MPa NPSM1/4“
● Max. stroke rate : 200 DS/min ● Cobra 40-10 on base frame
● Hopper 5L-Cobra
Application Area :
Wood, Woodworking industry, Furniture industry and ● AC hose DN4-PN270-1/4“NPS-7,5m-PA-T
Kitchen industry ● Filter pressure regulator cpl. nipple so
Article No Description
● Brass fitting reducer adapter 3/8” male npt
to 1/4” male npt (1EA)
WG0003619 322110 COBRA 40 -10
GM 5000EAC
VM 5000
Airless gun AG 14 GM 4100AC ● Set GM 5000EAC VC - VM 5000
● GM 5000EAC
● Nozzle ACF5000 11/40
● Airless gun AG 14, NPS 1/4”, ● GM 4100ac - 25mpa lv red ● Air cap ACF 5000 - LV (red)
● AC hose dn4 pn720-1/4 nps-7.5M ● Hose package GM 5000EAC (7.5m)
include TradeTip 3 nozzle holder, F-thread
● Filter regulator mtl guard1/4in kw08-289 ● Controler VM 5000
● Hp hose dn4 pn270 1/4nps 6,8m pa ● Mounting control unit assy
● Nozzle (as recommended) ● 1/4” Npt brass male double nipple external thread (4EA)
● 1/4” Npt brass female double nipple internal thread (2EA) ● Filter regulator mtl guard1/4in kw08-289
● 1/4”Npt brass male double nipple external thread (4EA)
● 1/4”Npt brass female double nipple internal thread (4EA)
Wagner Industrial Liquid
PUMA 28-40 HIGH-PRESSURE PISTON PUMPS
Technical Data :
● Pump ratio : 28 :1
● Max. stroke rate : 60 DS/min Component product :
● Material inlet : M–M 36x2
● Material outlet : M–M 24x1,5
● Material pH : 3.5 – 9 pH
● Allowable inclination : ±10 °
● Weight : 16,0 kg, 35.3 lb
● Air inlet pressure : 2,5 – 8,0 bar, 36 – 116 PSI
● Sound level at : 6 bar air pressure 74 dB(A)
● Operating pressure : 224 bar, 3249 PSI
● Volumetric flow per double stroke : 40 cm³/DS, 2,44 in³/DH
● Volumetric flow per : 60 DH 2.4 l/min
● Material temperature : 5 - 80 °C, 41 - 176 °F
● Ambient temperature : 5 – 60 °C, 41 – 140 °F
● Max. material pressure at pump inlet : 20 bar, 290 PSI
Component Product :
● Piston P. Puma 28-40 PE/TG
● Trolley 4“ assy.
● Suction hose DN25-SSt assy.
● HP-filter DN12-PN530-SSt kpl.
● Return Pipe DN6-G1/4”-100mm-PA
● Brass fitting reducer adapter 3/8” male npt
to 1/4” male npt (1EA)
Application Area :
Article No Description
Furniture industry, Kitchen manufacturers, Joinery, Window factories,
Steel fabrication and Construction of vehicles WG0003238 SPRAY PACK PUMA 28-40 TROLLEY 2337956
Article No Description
GM 4100AC
WG0002966 2337897 PUMA 28-40 SPRAY-P A-CT GM4100AC
Electrostatic AirSpray
Optional (WG0003565)
Trolley *
● GM 5000EA
● Nozzle AF 5000 - 1.0mm
● Air cap AF 5000 - 1.0-1.4W
GM 5000EA
● Hose package GM 5000EA (7.5m)
Article No Description ● Controler VM 5000
WG0002413 U760.00ZIP52 FINISHING DIAPH PUMP VM 5000 ● Mounting control unit assy
* WG0002427 TROLLEY FOR ZIP52
Technical Data :
● Pump ratio : 35 :1 ● Operating pressure : 250 bar, 3626 PSI
● Volumetric flow per : 60 DH 4.2 l/min ● Volumetric flow per double stroke : 70 cm³/DS, 4,27 in³/DH
● Max. stroke rate : 60 DS/min ● Air inlet pressure : 2,5 – 7,1 bar, 36 – 103 PSI
● Material inlet M–M : 36x2 ● Sound level at : 6 bar air pressure 74 dB(A)
● Material outlet M–M : 24x1,5 ● Material temperature : 5 - 80 °C, 41 - 176 °F
● Material pH : 3.5 – 9 pH ● Ambient temperature : 5 – 60 °C, 41 – 140 °F
● Allowable inclination : ±10 ° ● Max. material pressure at pump inlet : 20 bar, 290 PSI
Airless gun AG 14 ● Weight : 26,0 kg, 57.3 lb
Recommended Guns Package :
AirLess Package Electrostatic (WG0003564)
● SP Leopard35-70 AG14AL
● PistonP. Leopard 35-70 PE/TG
● Trolley 6“ assy.
● Suction hose DN25-SSt assy.
● HP-filter DN10-PN270-SSt kpl.
● Gun AG-14 f-thread 11/16“ NPS1/4“
● HP-Hose-DN6-PN270-¼“NPS-10,0m-PA VM 5000
GM 5000EAC
● Fitting-RF-FM-G1/4-NPS1/4-PN530-SSt assy
● Brass fitting reducer adapter 1/2” male npt ● GM 5000EAC
to 1/4” male npt (1EA) ● Set GM 5000EAC VC - VM 5000
● Nozzle ACF5000 11/40
● Air cap ACF 5000 - LV (red)
● Hose package GM 5000EAC (7.5m)
● Controler VM 5000
Application Area : Article No Description ● Mounting control unit assy
Furniture industry, Kitchen manufacturers, WG0003530 SPRAY PACK LEOPARD 35-70 ● Filter regulator mtl guard1/4in kw08-289
Joinery, Window factories, Steel fabrication and AL/ CPL 368127’ ● 1/4” Npt brass male double nipple external thread (4EA)
Airless gun
Construction AG 14
of vehicles VM 5000 ● 1/4” Npt brass female double nipple internal thread (2EA)
Wagner Industrial Liquid
LEOPARD 35-70 HIGH-PRESSURE PISTON PUMPS
Technical Data :
● Pump ratio : 35 :1 ● Operating pressure : 250 bar, 3626 PSI
● Volumetric flow per : 60 DH 4.2 l/min ● Volumetric flow
● Max. stroke rate : 60 DS/min per double stroke : 70 cm³/DS, 4,27 in³/DH
● Material inlet M–M : 36x2 ● Air inlet pressure : 2,5 – 7,1 bar, 36 – 103 PSI
● Material outlet M–M : 24x1,5 ● Sound level at : 6 bar air pressure 74 dB(A)
● Material pH : 3.5 – 9 pH ● Material temperature : 5 - 80 °C, 41 - 176 °F
● Allowable inclination : ±10 ° ● Ambient temperature : 5 – 60 °C, 41 – 140 °F
● Weight : 26,0 kg, 57.3 lb ● Max. material pressure
at pump inlet : 20 bar, 290 PSI
GM 4100AC
VM 5000 GM 5000EAC
Technical Data :
● Pump ratio : 75 :1
AirLess Package with Gun G-15
● Operating pressure : 530 bar, 7687 PSI ● Wagner piston pump Jaguar 75-150 PE/TG
● Weight : 53,0 kg, 116.9 lb ● HP-filter HPF-3
● Max. stroke rate : 60 DS/min ● Return tube HPF
● Material inlet : F–G 1 1/2‘‘ ● Flex suction hose DN25-M36x2-E90°
● Material outlet : M–M 24x1,5 ● HP-Hose-DN10-NP530; 15m
● Material pH : 3.5 – 9 pH ● Gun G 15
● Allowable inclination : ±10 ° ● WAGNER Profi Tip HP “F” reversing switch
● Volumetric flow per double stroke :150 cm³/DS, 9,15 in³/DH ● HP-Hose-DN6-NP530; 1,5m
● Volumetric flow per : 60 DH 9 l/min
● Nozzle Wagner Profi Tip HP 521
● Air inlet pressure : 2,5 – 7,1 bar, 36 – 103 PSI Gun G 15
● Trolley heavy duty Leopard/Jaguar
● Sound level at : 6 bar air pressure 81 dB(A)
● Material temperature : 5 - 80 °C, 41 - 176 °F ● Brass fitting reducer adapter 1” male npt to 1/2” male npt
● Ambient temperature : 5 – 60 °C, 41 – 140 °F Article No Description
● Max. material pressure at pump inlet : 20 bar, 290 PSI
WG0003113 SPRAY PACK JAGUAR75-150 AL/CART
Application Area : 0369142
Steel fabrication, Construction of vehicles and Offshore
Product Range
DESC (Digital Electronic Spray Control), is a new generation of electronic controls. With the digital display you can
view the current pressure, call up pre-defined pressure options and display material consumed in litres. Furthermore,
these devices contain all the advantages of the reliable WAGNER “Spray Control Systems”.
Voltage 230 V / 50 Hz
Max. delivery rate 1.6 l/min 2.0 l/min 2.3 l/min 2.6 l/min 3.0 l/min 3.8 l/min 4.5 l/min 5.0 l/min
Max. nozzle size 0.021“ 0.023“ 0.023“ 0.027“ 0.029“ 0.032“ 0.034“ 0.039“
The patented SSP-System (Special Spray Power) is an unique WAGNER development. The special design ensures that
the drawing piston continuously fills the pump with a sufficient amount of material - a big advantage when it comes
to processing airless spray joint filler, adhesives and bituminous coatings. A specially developed cleaning adaptor,
provides quick cleaning of the pump unit.
Unique: A performance capability of 0-12 l/min and ability to handle materials with a grain size up to 3 mm make
the PC 830 the perfect partner on the building site.
For maximum precision and precise adjustment the gun can be locked in the desired position. The setting is also retained
for template work and other Airless jobs. The gun can be removed from the carrier without tools.
1 Reliable
The unique internal design of the motor and its special
discharge valves drastically reduce ice formation and
prevent accumulation to ensure superior performance
and exceptional reliability.
3 Safe operation
The pressure regulator is integrated with a safety air
valve to ensure, when it is closed, that no pressure is
left in the air motor
4 Service friendly
The release agent cup is easily accessible. The quickre-
lease coupling between the piston rod and air motor
makes it possible to quickly and easily disconnect the
fluid section.
300 mm The bore diameter (in this example: In set: When purchasing a
0.017 inch) determines the flow vol- TradeTip 3 nozzle you will
The ideal distance to the object ume and thus the amount of paint get a matching gun filter
is approx. 300 mm. to be applied. and a double seal for free.
Injection lance
• Injection lance, 40 MPa 11/16“ 0097 057