0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
31 visualizzazioni2 pagine
This document contains configuration details and output from an interface on a network device. It shows the interface state changing from up to down as remote loopback is enabled on the interface. It also contains instructions to remove the loopback and return the clock setting to master after testing is complete in order to normalize the interface.
This document contains configuration details and output from an interface on a network device. It shows the interface state changing from up to down as remote loopback is enabled on the interface. It also contains instructions to remove the loopback and return the clock setting to master after testing is complete in order to normalize the interface.
This document contains configuration details and output from an interface on a network device. It shows the interface state changing from up to down as remote loopback is enabled on the interface. It also contains instructions to remove the loopback and return the clock setting to master after testing is complete in order to normalize the interface.
Line protocol current state : UP Last line protocol up time : 2012-06-07 10:37:52 Description:### BCO PROVINCIAL COCA COLA FEMSA SAN FELIX (193)(BANPR-4193)# Route Port,The Maximum Transmit Unit is 1500, Hold timer is 10(sec) Derived from Cpos2/2/1 e1 19, Timeslot(s) Used: 1-31, baudrate is 1984000 bps Internet Address is 10.18.0.102/30 Link layer protocol is PPP LCP opened, IPCP opened L2VPN interworking connection of the main PW is up L2VPN interworking connection of the second PW is down Physical layer is Packet Over NO-CRC4 clock master, loopback none CRC: CRC-16 Scramble disabled Alarm: None Statistics last cleared:2012-06-07 10:25:37 Traffic statistics: Last 300 seconds input rate 2480 bits/sec, 1 packets/sec Last 300 seconds output rate 560 bits/sec, 0 packets/sec Input: 1783 packets, 270930 bytes Input error: 0 shortpacket, 0 longpacket, 211 CRC, 59 lostpacket Output: 1139 packets, 97265 bytes Output error: 0 lostpackets Output error: 0 overrunpackets, 0 underrunpackets
<OMTPOZ40N01>system-view Enter system view, return user view with Ctrl+Z.
[OMTPOZ40N01]controller cpos2/2/1
[OMTPOZ40N01-Cpos2/2/1]e1 19 set clock ?
master Set master to clock recovery-domain A mode slave Set slave to clock
[OMTPOZ40N01-Cpos2/2/1]e1 19 set clock slave --------------PARA UN LOOP DESDE LA
INTERFAZ HACIA EL CLIENTE EL CLOCK DEBE ESTAR ----------------
[OMTPOZ40N01-Cpos2/2/1]e1 19 set loopback ?
local loopback mode local remote loopback mode remote
[OMTPOZ40N01-Cpos2/2/1]e1 19 set loopback remote
<OMTPOZ40N01>display interface Serial2/2/1/19:0
Serial2/2/1/19:0 current state : UP Line protocol current state : DOWN Description:### BCO PROVINCIAL COCA COLA FEMSA SAN FELIX (193)(BANPR-4193)# Route Port,The Maximum Transmit Unit is 1500, Hold timer is 10(sec) Derived from Cpos2/2/1 e1 19, Timeslot(s) Used: 1-31, baudrate is 1984000 bps Internet Address is 10.18.0.102/30 Link layer protocol is PPP LCP reqsent L2VPN interworking connection of the main PW is up L2VPN interworking connection of the second PW is down Physical layer is Packet Over NO-CRC4 clock slave, loopback remote CRC: CRC-16 Scramble disabled Alarm: None Statistics last cleared:2012-06-07 10:25:37 Traffic statistics: Last 300 seconds input rate 136 bits/sec, 0 packets/sec Last 300 seconds output rate 112 bits/sec, 0 packets/sec Input: 2129 packets, 315520 bytes Input error: 0 shortpacket, 0 longpacket, 467 CRC, 316 lostpacket Output: 1365 packets, 109724 bytes Output error: 0 lostpackets Output error: 0 overrunpackets, 0 underrunpackets
LUEGO PARA NORMALIZAR LA INTEFAZ SE QUITAR EL LOOP CON UNDO E1 LOOP,
DEVOLVER EL CAMBIO DEL CLOCK AL TERMINAR LAS PRUEBAS MASTER