10.3 Uncontrolled movement test (if equipped with BODE overspeed governor)
Step Action Illustration/Note
1 With an empty car drive the car to any floor Ensure that the car, car roof and the shaft level but the topmost floor. are empty and secured 2 Open the machine brake manually by The anti-slide solenoid of BODE overspeed turning the lever. governor will engage the overspeed governor when the car is moving from landing level from 90 to 250 mm. 3 Engaging the overspeed governor will open The total movement of car from landing the safety circuit switch and apply the rope should be within 900 mm. gripper. 4 Handwind the car downwards to release the The antislide solenoid must be locked open overspeed governor. with pin before moving the car. 5 Set the valve to manual. See section ‘Adjustment of brake ready microswitch and trigger mechanism’. 6 Use the hand pump to open the rope gripper. 7 Hold the main brake open. Let the car When reaching the door zone the anti-slide ascend to the next floor above. solenoid of the overspeed governor closes the safety circuit and allows normal operation of the elevator. 8 Set the valve to automatic. The elevator should return to normal operation. Model 618 must be set by hand. See section ‘Overspeed test for ascending car’.
Instruction Manual Handleiding en Gebruiksvoorschriften Mode D'emploi Et Instructions Pour L'utilisation Bedienungsanleitung Und Gebrauchsvorschriften Manual de Instrucciones Manuale Di Istruzioni