Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
GOVERNMENT OF RAJASTHAN
PUBLIC WORKS DEPARTMENT
SUPERINTENDING ENGINEER
PUBLIC WORKS DEPARTMENT
NATIONAL HIGHWAY, CIRCLE JAIPUR
INDEX
CHAPTER-11 HORTICULTURE
CHAPTER-12 FOUNDATIONS
CHAPTER-13 SUB-STRUCTURE
CHAPTER-14 SUPER-STRUCTURE
Av. % Increase
CHAPTER
DESCRIPTION over rates in BSR -
NO.
2013
PART - "A" LEAD CHART FOR ROAD MATERIAL AND
CHAPTER-1 11.00%
THEIR CARRIAGE
Output of
Sl. No. Description of Machine Activity Output Unit Rate
Machine
P&M-001 Air Compressor General Purpose capacity in cfm 170/250 hour 271.00
Batching and Mixing Plant (a) 30 cum
P&M-002 Concrete Mixing cum/hour 20 hour 2109.00
capacity
Batching and Mixing Plant (b) 15 - 20 cum
P&M-003 Concrete Mixing cum/hour 13 hour 1725.00
capacity
P&M-004 Bitumen Pressure Distributor Applying bitumen tack coat sqm/hour 1750 hour 744.00
P&M-005 Bitumen Boiler oil fired Bitumen Spraying capacity in litre 1500 hour 224.00
P&M-006 Concrete Paver Finisher with 40 HP Motor Paving of concrete surface cum / hour 20 hour 2442.00
P&M-007 Concrete Pump of 45 & 30 cum capacity Pumping of concrete cum / hour 33 / 22 hour 570.00
P&M-008 Concrete Bucket For Pouring concrete capacity in cum 1 hour 115.00
P&M-009 Concrete Mixer (a) 0.4/0.28 cum Concrete Mixing cum/hour 2.5 hour 130.00
P&M-010 Concrete Mixer (b) 1 cum Concrete Mixing cum/hour 7.5 hour 204.00
P&M-014 Dozer D - 80 - A 12 Spreading /Cutting / Clearing cum/hour 300/ 150/250 hour 2373.00
P&M-015 Dozer D - 50 - A 15 Spreading /Cutting / Clearing cum/hour 200/ 120/150 hour 1595.00
P&M-016 Emulsion Pressure Distributor Applying emulsion tack coat sqm/hour 1750 hour 706.00
P&M-017 Front End loader 1 cum bucket capacity Soil loading / Aggregate loading cum/hour 60 /25 hour 770.00
P&M-018 Generator (a) 125 KVA Genration of electric Energy KVA 100 hour 741.00
P&M-021 Hotmix Plant - 120 TPH capacity DBM/BM/SDC/ Premix cum/hour 40 hour 12000.00
P&M-022 Hotmix Plant - 100 TPH capacity DBM/BM/SDC/ Premix cum/hour 30 hour 11000.00
P&M-023 Hotmix Plant - 60 to 90 TPH capacity DBM/BM/SDC/ Premix cum/hour 25 hour 9000.00
P&M-024 Hotmix Plant - 40 to 60 TPH capacity DBM/BM/SDC/ Premix cum/hour 17 hour 7500.00
P&M-025 Hydraulic Chip Spreader Surface Dressing sqm/hour 1500 hour 1568.00
Soil Ordinary/Soil Marshy / Soil
P&M-026 Hydraulic Excavator of 1 cum bucket cum/hour 60 /60 /60 hour 914.00
Unsuitable
P&M-027 Integrated Stone Crusher 100THP Crushing of Spalls TPH 100 hour 6704.00
P&M-028 Integrated Stone Crusher 200 HP Crushing of Spalls TPH 200 hour 13552.00
P&M-030 Mastic Cooker Mastic Wearing coat capacity in tonne 1 hour 48.00
P&M-031 Mechanical Broom Hydraulic Surface Cleaning sqm/hour 1250 hour 184.00
P&M-032 Motor Grader 3.35 mtr blade Clearing /Spreading /GSB /WBM cum/hour 200/200/50/50 hour 1680.00
P&M-033 Mobile slurry seal equipment Mixing and laying slurry seal sqm/hour 2700 hour 735.00
Paver Finisher Hydrostatic with sensor
P&M-034 Paving of DBM/ BM/SDC/ Premix cum/hour 40 hour 1695.00
control 100 TPH
P&M-035 Paver Finisher Mechanical 100 TPH Paving of WMM /Paving of DLC cum/hour 40/30 hour 715.00
0.75 m dia to 1.2 m dia Boring
P&M-036 Piling Rig with Bantonite Pump Rm/hour 2 to 3 hour 4158.00
attachment
P&M-037 Pneumatic Road Roller Rolling of Asphalt Surface cum/hour 25 hour 1265.00
P&M-038 Pneumatic Sinking Plant Pneumatic Sinking of wells cum/hour 1.5 to 2.00 hour 2998.00
P&M-039 Pot Hole Repair Machine Repair of potholes cum/hour 4 hour 627.00
P&M-040 Prestressing Jack with Pump & access Stressing of steel wires/stands hour 109.00
(1)
P&M-043 Road marking machine Road marking Sqm/hour 100 hour 84.00
Soil Compaction /BM
P&M-044 Smooth Wheeled Roller 8 tonne cum/hour 70/25 hour 224.00
Compaction
P&M-045 Tandem Road Roller Rolling of Aspalt Surface cum/hour 30 hour 935.00
Transportation of soil, GSB,
P&M-046 Tipper - 5 cum Capacity in cum 5.5 km 243.00
WMM, Hotmix etc.
Transportation of soil, GSB,
P&M-047 Tipper - 5 cum Capacity in cum 5.5 tonne.km 2.00
WMM, Hotmix etc.
Transportation of soil, GSB,
P&M-048 Tipper - 5 cum Capacity in cum 5.5 hour 250.00
WMM, Hotmix etc.
Transportation of Concrete Mix to
P&M-049 Transit Mixer 4.0/4.5 cum cum/hour 4.5 hour 813.00
site
Transportation of Concrete Mix to
P&M-050 Transit Mixer 4/4.5 cum cum/hour 4.5 tonne.km 2.00
site
Transportation of Concrete Mix to
P&M-051 Transit Mixer 3.0 cum cum/hour 3 hour 690.00
site
Transportation of Concrete Mix to
P&M-052 Transit Mixer 3.0 cum cum/hour 3 tonne.km 2.00
site
P&M-053 Tractor Pulling capacity in HP 50 hour 193.00
P&M-056 Truck 5.5 cum per 10 tonnes Material Transport capacity/cum 4.5 km 220.00
P&M-057 Truck 5.5 cum per 10 tonnes Material Transport capacity/cum 4.5 hour 222.00
P&M-058 Truck 5.5 cum per 10 tonnes Material Transport capacity/cum 4.5 tonne.km 2.25
P&M-059 Vibratory Roller 8 tonne Earth or soil / GSB / WBM cum/hour 100/60/60 hour 1188.00
P&M-062 Wet Mix Plant 75 TPH Wet Mix cum/hour 25 hour 944.00
P&M-064 Batch type cold mixing plant 100-120 TPH capacity producing an average output of 75 tonne per hour hour 1512.00
P&M-067 Cement concrete batch mix plant @ 175 cum per hour (effective output) hour 7560.00
P&M-068 Cement concrete batch mix plant @ 75 cum per hour hour 1857.00
P&M-076 Compressor with guniting equipment along with accessories hour 313.00
P&M-077 Drum mix plant for cold mixes of appropriate capacity but not less than 75 tonnes/hour. hour 5040.00
P&M-085 Piling rig Including double acting pile driving hammer (Hydraulic rig) hrs 3746.00
(2)
P&M-087 Snow blower equipment 140 HP @ 600 cum per hour hour 631.00
P&M-092 Vibrating Pile driving hammer complete with power unit and accessories. hour 687.00
(3)
(B) Labour
(C) Materials
M-001 Stone Boulder of size 150 mm and below at Cruser Plant cum 388.00
M-002 Supply of quarried stone 150 - 200 mm size for Hand Broken at site cum 388.00
M-003 Boulder with minimum size of 300 mm for Pitching at Site cum 605.00
(4)
M-006 Fine sand at Site cum 630.00
M-009 Granular Material or hard murrum for GSB works at Site Cum 275.00
M-010 Granular Material or hard murrum for GSB works at Mixing Plant Cum 275.00
M-011 Fly ash conforming to IS: 3812 ( Part II & I) atHMP Plant / Batching Plant / Crushing Plant Cum 242.00
M-012 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) Cum 345.00
Rate at
Plant
Description Unit
(HMP/Batc
Rate at Site
hing)
M-013 Close graded Granular sub-base Material 53 mm to 9.5 mm cum 358 374.00
M-014 Close graded Granular sub-base Material 37.5 mm to 9.5 mm cum 358 374.00
M-015 Close graded Granular sub-base Material 26.5 mm to 9.5 mm cum 358 374.00
M-016 Close graded Granular sub-base Material 9.5 mm to 4.75 mm cum 358 374.00
M-017 Close graded Granular sub-base Material 9.5 mm to 2.36 mm cum 330 345.00
M-018 Close graded Granular sub-base Material 4.75mm to 2.36 mm cum 330 345.00
M-019 Close graded Granular sub-base Material 4.75mm to 75 micron mm 330 345.00
M-020 Close graded Granular sub-base Material 2.36 mm cum 308 322.00
M-021 Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve. cum 308 322.00
M-022 Coarse graded Granular sub-base Material 2.36 mm & below cum 308 322.00
M-023 Coarse graded Granular sub-base Material 4.75mm to 75 micron mm 330 345.00
M-024 Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm cum 358 374.00
M-025 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm cum 358 374.00
M-026 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm cum 369 385.00
M-027 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm cum 369 385.00
M-028 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm cum 369 385.00
M-029 Coarse graded Granular sub-base Material 53 mm to 26 .5mm cum 369 385.00
(5)
M-047 Aggregates 19 mm to 6 mm cum 633 633.00
M-065 Bearing (Cast steel rocker bearing assembly of 250 tonne ) nos 55660.00
Bearing (Elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal
M-066 nos 16698.00
reinforcing steel laminates by the process of vulcanisation,)
M-067 Bearing (Forged steel roller bearing of 250 tonne nos 85008.00
Bearing (Pot type bearing assembly consisting of a metal piston supported by a disc, PTFE pads providing sliding
M-068 surfaces against stainless steel mating together with cast steel assemblies/fabricated structural steel assemblies nos 141680.00
duly painted with all components
M-069 Bearing (PTFE sliding plate bearing assembly of 80 tonnes ) nos 34788.00
M-073 Bitumen Cationic Emulsion SS-2 for Fog seal, crack seal, slurry seal, premix seal coat tonne 23900.00
M-077 Bitumen Emulsion Rapid RS-1 for tack coat tonne 25200.00
M-077-1 Bitumen Emulsion Rapid RS-2 for Surface dressing, Grouting and Penetration macadam tonne 24500.00
M-077-2 Bitumen Emulsion (medium) MS for Patch work, 20mm PMC tonne 24600.00
M-077-3 Bitumen Emulsion (slow) SS-1 for Prime coat- WMM/WBM surface tonne 21000.00
(6)
M-088 Corrugated sheet, 3 mm thick, "Thrie" beam section railing kg 69.00
M-089 Credit for excavated rock found suitable for use cum 230.00
M-091 Delineators from ISI certified firm as per the standard drawing given in IRC - 79 each 613.00
M-092 Earth Cost or compensation for earth taken from private land cum 52.00
Elastomeric slab seal expansion joint assembly manufactured by using chloroprene, elastomer for elastomeric
M-093 metre 12254.00
slab unit conforming to clause 915.1 of IRC: 83 (part II),
M-094 Electric Detonators @ 1 detonator for 1/2 gelatin stick of 125 gms each 100 nos 759.00
M-095 Epoxy compound with accessories for preparing epoxy mortar kg 1012.00
M-102 Galvanised steel wire crates of mesh size 100 mm x 100 mm woven with 4mm dia. GI wire in rolls of required size. sqm 281.00
M-103 Galvanised structural steel plate 200 mm wide, 6 mm thick, 24 m long kg 63.00
M-121 Jute netting, open weave, 2.5 cm square opening for seeding and Mulching sqm 46.00
(7)
M-133 Paving Fabric sqm 221.00
M-135 Perforated pipe of cement concrete, internal dia 100 mm metre 291.00
M-137 Pipes 200 mm dia, 2.5 m long for drainage AC metre 159.00
M-137-1 Plastic sheet with back side adhesive , 1.25 mm thick for printing letter sqm 232.00
M-138 Plastic sheath, 1.25 mm thick for dowel bars sqm 77.00
M-141 Pre moulded Joint filler,25 mm thick for expansion joint. sqm 312.00
M-145 Pre-packed cement based polymer concrete of strength 45 Mpa at 28 days kg 437.00
M-149 RCC Pipe NP 4 heavy duty non presure pipe 1000 mm dia metre 5925.00
M-150 RCC Pipe NP 4 heavy duty non presure pipe 1200 mm dia metre 6547.00
M-150-1 RCC Pipe NP 4 heavy duty non presure pipe 900 mm dia metre 5175.00
M-150-2 RCC Pipe NP 4 heavy duty non presure pipe 600 mm dia metre 3450.00
M-151 RCC Pipe NP 4 heavy duty non presure pipe 300 mm dia metre 2358.00
M-153 Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Copper Strips) metre 350.00
M-154 Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Galvanised carbon steel strips) metre 229.00
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Glass reinforced polymer/fibre reinforced
M-155 metre 204.00
polymer/polymeric strips)
M-156 Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Stainless steel strips) metre 316.00
M-157 Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. Aluminium strips) metre 297.00
M-159 Sand bags (Cost of sand and Empty cement bag) nos 9.00
M-164 Separation Membrane of impermeable plastic sheeting 125 micron thick sqm 21.00
M-167 Sludge / Farm yard manure @ 0.18 cum per 100 sqm at site of work for turfing cum 368.00
M-170 Steel circular hollow pole of standard specification for street lighting to mount light at 5 m height above deck level each 8441.00
M-171 Steel circular hollow pole of standard specification for street lighting to mount light at 9 m height above road level each 11850.00
M-172 Steel drum 300 mm dia 1.2 m high/empty bitumen drum nos 297.00
M-173 Steel helmet and cushion block on top of pile head during driving. kg 66.00
(8)
M-177 Steel wire rope 40 mm kg 88.00
M-181 Synthetic Geogrids as per clause 3102.8 and approved design and specifications. sqm 447.00
M-186 Traffic cones with 150 mm reflective sleeve (Plastic) nos 638.00
M-187 Tube anchorage set complete with bearing plate, permanent wedges etc nos 1469.00
M-196 Wooden staff for fastening of flag 25 mm dia, one m long each 15.00
(9)
Overheads for Road Works 10 %
Lead from Mixing Plant to working site 20 km 1 Km for Chapter 1 to 5 and 20 for other Chapter.
(10)
Summary of Rates calculated and used for analysis of rates of other
Items No. Unit Rate
items
per cm
Item 8.3 Printing new letter and figures of any shade (ii) English Roman height per 0.40
letter
Printing new letter and figures with backgound of any shade over plastic sheet (ii) Hindi /
Item 8.3 .1 sqm 180.00
English / Roman
Item 8.8 Painting Two Coats on New Concrete Surfaces sqm 50.00
Item 8.9 Painting angle iron post two coats sqm 50.00
Item 12.6 (B) Cement mortor 1:2 (Excluding OH & CP) cum 4,880.00
Item 12.6 (A) Cement mortor 1:3 (Excluding OH & CP) cum 4,032.00
Item 12.6 (D) Cement mortor 1:6 (Excluding OH & CP) cum 2,863.00
Item 12.7 (A ) Course Rubble masonary in cement mortor 1:3 (including OH & CP) cum 4,356.00
Item 12.7 (Addl) B) Random Rubble masonary in cement mortor 1:6 (including OH & CP) cum 3,220.00
Item 12.8 (A) PCC Grade M15 including OH & CP for Open Foundation by Mixer cum 4,012.00
PCC Grade M15 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (A) cum 3,189.00
Mechinery by Mixer
PCC Grade M20 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (B) PCC cum 3,561.00
Mechinery by Mixer
RCC Grade M20 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (C) cum 3,587.00
Mechinery by Mixer
Item 12.8 (C) RCC RCC Grade M20 including OH & CP for Open Foundation by Batching Plant cum 3,976.00
RCC Grade M20 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (C) cum 3,160.00
Mechinery by Batching Plant
PCC Grade M25 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (D) cum 3,882.00
Mechinery by Mixer
Item 12.8 (D) PCC Grade M25 including OH & CP for Open Foundation by Batching Plant cum 4,341.00
PCC Grade M25 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (D) cum 3,458.00
Mechinery by Batching Plant
RCC Grade M25 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (E) cum 3,912.00
Mechinery by Mixer
RCC Grade M25 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (E) cum 3,606.00
Mechinery by Batching Plant
PCC Grade M30 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (F) cum 3,917.00
Mechinery by Mixer
PCC Grade M30 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (F) cum 3,490.00
Mechinery by Batching Plant
RCC Grade M30 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (G) cum 3,931.00
Mechinery by Mixer
RCC Grade M30 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (G) cum 3,505.00
Mechinery by Batching Plant
RCC Grade M35 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (H) cum 4,020.00
Mechinery by Mixer
Item 12.8 (H) RCC Grade M35 including OH & CP for Open Foundation by Batching Plant cum 3,832.00
Item 12.8 (H) RCC Grade M35 excluding OH & CP for Open Foundation by Batching Plant cum 4,637.00
RCC Grade M35 for Open Foundation Per Cum Basic Cost of Labour, Material &
Item 12.8 (H) cum 3,721.00
Mechinery by Batching Plant
PCC Grade M20 for Open Foundation (Bottom Plug) Per Cum Basic Cost of Labour,
Item 12.11 (C) i cum 3,928.00
Material & Mechinery by Mixer
PCC Grade M20 for Open Foundation (Bottom Plug) Per Cum Basic Cost of Labour,
Item 12.11 (C) i cum 3,386.00
Material & Mechinery by Batching Plant
PCC Grade M25 for Open Foundation (Bottom Plug) Per Cum Basic Cost of Labour,
Item 12.11 (C) ii cum 4,113.00
Material & Mechinery by Mixer
PCC Grade M25 for Open Foundation (Bottom Plug) Per Cum Basic Cost of Labour,
Item 12.11 (C) ii cum 3,569.00
Material & Mechinery by Batching Plant
PCC Grade M30 for Open Foundation (Bottom Plug) Per Cum Basic Cost of Labour,
Item 12.11 (C) iii cum 4,148.00
Material & Mechinery by Mixer
PCC Grade M30 for Open Foundation (Bottom Plug) Per Cum Basic Cost of Labour,
Item 12.11 (C) iii cum 3,606.00
Material & Mechinery by Batching Plant
PCC Grade M35 for Open Foundation (Bottom Plug) Per Cum Basic Cost of Labour,
Item 12.11 (C) iv cum 4,229.00
Material & Mechinery by Mixer
(11)
Item 12.11 (C) iv PCC Grade M35 including OH & CP for Well Foundation (Bottom Plug) by Batching Plant cum 4,656.00
PCC Grade M35 for Open Foundation (Bottom Plug) Per Cum Basic Cost of Labour,
Item 12.11 (C) iv cum 3,685.00
Material & Mechinery by Batching Plant
Item 12.11 (F) iv PCC Grade M35 including OH & CP for Well Foundation (Well Cap) by Batching Plant cum 4,479.00
Item No. 3.13 Excavation for Structures (Manual Means) cum 264.00
Item No. 3.13 Excavation for Structures (Mechenical Meanse) cum 31.00
Item 14.1(A) RCC Grade M20 for super-structure including OH & CP by Batching Plant cum
4,536.00
Item 14.1(B) RCC Grade M30 for super-structure including OH & CP by Batching Plant cum
5,030.00
Item 14.1(E) RCC Grade M40 for super-structure including OH & CP by Batching Plant cum
5,583.40
RCC Grade M30 for super-structure including formwork and excluding OH & CP by
Item 14.1(C) cum
Batching Plant 4,210.00
RCC Grade M40 for super-structure excluding formwork and excluding OH & CP by
Item 14.1(C) cum
Batching Plant 3,508.00
Supplying ,fitting and placing HYSD bar reinforcement in super-structure exncluding OH &
Item 14.2 A tonne 51,130.00
CP
Item 13.6 Supplying, fitting and placing HYSD including OH & CP for sub-structure tonne 60,733.00
Crack Prevention courses. Case-I Stress Absorbing Membrane (SAM) crack width less than
Item 5.21 Case-I sqm 50.00
6 mm
Crack Prevention courses. Case-II Stress Absorbing Membrane (SAM) with crack width 6
Item 5.21 Case-II sqm 59.00
mm to 9 mm
Crack Prevention courses. Case-III Stress Absorbing Membrane (SAM) crack width above 9
Item 5.21 Case-IV sqm 78.00
mm and cracked area above 50 %
Item 5.21 Case-IV Crack Prevention courses. Case-IV Bitumen Impregnated Geotextile sqm 552.00
Item 5.15 Case-III Slurry Seal Case III 1.5 mm thickness sqm 18.00
Item 5.9 Case-I Surface Dressing Case-I 19 mm nominal chipping size sqm 66.00
Item 5.9 Case-II Surface Dressing Case-II 13 mm nominal size chipping sqm 54.00
(12)
1
CHAPTER : R-1
PART - "A" ROAD MATERIAL AND THEIR CARRIAGE
LEAD CHART
NOTE: Part of Km beyond 1Km will be treated as under :
1.499=1.00 Km; 1.500 Km = 2.00 Km.
1.1 Carriage of Earth, Sand, Lime, Cum 20.00 3.00 50.00 60.00 4.00 75.00 3.00 91.00 3.00 120.00 3.00
Morrum, Manure or Sludge
etc. including loading and
unloading complete with a
lead of
1.2 Carriage of Building Rubbish Cum 22.00 4.00 56.00 67.00 4.00 82.00 3.00 99.00 3.00 128.00 3.00
Stone Metal, Grit and Ballast
etc. including loading and
unloading complete with a
lead of
1.3 Stone for masonry work and Cum 23.00 4.00 61.00 76.00 5.00 95.00 4.00 114.00 4.00 151.00 3.00
soiling
1.4 Excavated work Cum 26.00 5.00 68.00 82.00 5.00 102.00 4.00 123.00 4.00 165.00 3.00
1.5 Bricks 1000 42.00 8.00 119.00 127.00 8.00 161.00 8.00 203.00 7.00 270.00 5.00
Nos.
1.6 Brick Tiles 1000 34.00 6.00 86.00 93.00 7.00 120.00 7.00 153.00 6.00 211.00 4.00
Nos.
1.7 Cement, Stone Blocks, Pipes MT 26.00 2.00 45.00 54.00 3.00 66.00 3.00 82.00 3.00 109.00 2.00
and other heavy materials
1.8 Steal, Tar, Bitumen and Steam MT 31.00 3.00 57.00 67.00 4.00 82.00 4.00 101.00 3.00 130.00 2.00
Coal
1.9 Empty Bitumen Drums 10 12.00 2.00 27.00 34.00 1.00 39.00 2.00 48.00 1.00 61.00 1.00
Nos.
1.10 Crriage with care Precast cement concrete blocks like Dand & kerbs etc. weighting
1.10.1 Up to 50 Kg. Each - - - 5.00 0.00 6.00 0.00 8.00 0.00 9.00 0.00
1.10.2 51 to 70 Kg. Each - - - 7.00 0.00 8.00 0.00 10.00 0.00 12.00 0.00
1.10.3 71 to 100 Kg. Each - - - 8.00 1.00 11.00 0.00 12.00 0.00 14.00 0.00
1.11 RCC Hume Pipe with Collar - - - 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
1.11.1 Dia 300 mm Meter - - 20.00 24.00 1.00 27.00 0.00 28.00 0.00 30.00 0.00
1.11.2 Dia 600 mm Meter - - 54.00 57.00 1.00 62.00 1.00 69.00 1.00 78.00 1.00
1.11.3 Dia 900 mm Meter - - 134.00 143.00 3.00 153.00 2.00 164.00 2.00 182.00 1.00
1.11.4 Dia 1200 mm Meter - - 167.00 185.00 3.00 198.00 3.00 212.00 2.00 230.00 1.00
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
2
CHAPTER : R-1
PART - "B" ROAD MATERIALS & THEIR CARRIAGE
Rate (Rs.)
Item No. Item Description Unit
2016
PART - A CARRIAGE OF MATERIALS
1.12 Carriage of Bitumen mixed material from Hot Mix Plant in
Tipper to Paver Finisher
1.12.1 For the first km. (rate is included in the respective item).
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
3
CHAPTER : R-2
SITE CLEARANCE & DISMANTLING
Item No. Item Description Unit Rate (Rs.)
2016
2.1 Cutting of trees, including cutting of trunks, branches and
removal of stumps, roots stacking of serviceable material
with all lifts and up to a lead of 1000 m and earth filling in
the depression/ pit as per MoRTH specification clause 201.
2.4.1 Concrete
2.4.1.1 By Manual Means.
2.4.1.1.1 Lime concrete, cement concrete grade M-10 and below Cum 315.00
2.4.1.1.2 Cement concrete grade M-15 & M-20. Cum 381.00
2.4.1.1.3 Pre-stressed/ reinforced cement concrete grade M-20 & Cum 1075.00
above
2.4.1.2 By mechanical Means
2.4.1.2.1 Cement concrete grade M-15 & M-20 Cum 358.00
2.4.1.2.2 Pre-stressed/ reinforced cement concrete grade M-20 & Cum 654.00
above
2.4.2 Brick/ tile work
2.4.2.1 In lime mortar Cum 182.00
2.4.2.2 In cement mortar Cum 248.00
2.4.2.3 In mud mortar Cum 156.00
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
4
2.7 Dismantling guard rails by manual means and disposal of Meter 61.00
dismantled material with all lifts and up to a lead of 1000
meters, stacking serviceable materials and unserviceable
materials separately as per MoRTH specification clause
202.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
5
2.12 Dismantling of CI water pipe line 600 mm Dia including Meter 104.00
disposal with all lift and lead up to 1000 meters and
stacking of serviceable material and unserviceable material
separately under supervision of concerned department but
excluding earth excavation and dismantling of masonry
works as per MoRTH specification clause 202.
2.13 Removal of cement concrete pipe of sewer gutter 1500 mm Meter 121.00
Dia under the supervision of concerned department
including disposal with all lifts and up to a lead of 1000
meters and stacking of serviceable and unserviceable
material separately but excluding earth excavation and
dismantling of masonry works as per MoRTH specification
clause 202.
2.15 Scarifying the existing granular road surface to a depth of Sqm 17.00
50 mm by manual means and disposal of scarified material
within all lifts and leads up to 1000 meters as per MoRTH
specification Clause No. 305.4.3.
2.16 Scarifying the existing bituminous road surface to a depth Sqm 6.00
of 50 mm by mechanical means and disposal of scarified
material within all lifts and lead up to 1000 meters as per
MoRTH specification Clause No. 305.4.3.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
6
2.18 Cleaning of the existing black topped surfaces with Sqm 2.60
brooms/soft brushes finally dusting with old gunny bags
and compressed air to receive bituminous treatment
[MoRTH Specification 501 to 503 & 112]
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
7
CHAPTER : R-3
EARTH WORK, EROSION CONTROL AND DRAINAGE
FOR ROADS
3.1.4.1 Soft Rock with lead up to 50 m. and lift up to 0.5 m. Cum 678.00
3.1.4.2 Hard Rock with lead up to 50m.and lift up to 0.5m. Cum 1121.00
3.1.5 In Soil unsuitable for road construction such as marshy Cum 75.00
soil including pumping out water, removal of the same and
disposal within a lead up to 50m.and lift up to 0.5m.
3.5 Compaction of original ground with maximum of six 100 Sqm 349.00
passes of 8-10 tonnes power roller including filling
depression occurring during rolling [MoRTH Specification :
Clause 305.3.4]
3.6 Extra for laying earth as per specification for compaction
in 200 mm thick loose layers and dressing [MoRTH
Specification Clause 305.3.5].
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
8
3.90 Extra for rolling to specification with the use of Vibratory Cum 26.00
roller when earth is at suitable moisture content with
desired field density not less than 100% of maximum dry
density (Modified Heavy Proctor test).excluding watering.
3.10 Extra for rolling to specification with Power Roller, 8-10 Cum 11.00
tonne when earth is at suitable moisture content with dry
field density not less than 95 % of maximum dry density
(Ordinary Procter test).excluding watering.
3.11 Extra for rolling to specification with Power Roller, 8-10 Cum 12.00
tonne when earth is at suitable moisture content with dry
field density not less than 100 % of maximum dry density
(Ordinary Procter test).excluding watering.
3.12 Earthwork in excavation in foundation trenches etc. not
exceeding 2 meters depth including dressing of bottom
and sides of trenches, stacking the excavated soil 3m.
Clear from the edge of excavation and subsequent filling
around Hume pipes/masonry in 15cm. Layers with
compaction including disposal of all surplus soil, as
directed within a lead of 1000 meters.[MoRTH
Specification : Clause 301,304].
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
9
3.17 Construction of sub grade and earthen shoulders with Cum 229.00
approved material obtained from borrow pits with all lifts
and leads, transporting to site, spreading, grading to
require slope and compacted by vibratory roller 8-10
Tonne to meet requirement of Table 300-2 as per MoRTH
specification Clause No. 305.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
10
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
11
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
12
CHAPTER : R-4
SUB-BASES, BASES (NON- BITUMINOUS) AND
SHOULDERS
Item No. Item Description Rate (Rs.)
Unit
2016
4.1 Providing laying, spreading and compacting inverted choke Cum 461.00
of specified graded aggregate in sub base course in
uniform layer on a prepared base with motor grader and
compacting with power roller etc.(by mechanical means).
[MoRTH Specification : Clause 404.3.2.]
4.2 Providing and laying granular sub-base material having P.I.
not more than 6 including spreading in layers not
exceeding 150 mm compacted thickness and
consolidation by 8-10 tonne power roller to required
camber and grade including cost of water and hire charges
of machinery including T&P with all lead (Compacted
thickness to be measured).as per MoRTH specification
table 400-1, 400-2,
4.2.1 For grading-I with CBR value not less than 30. To attain Cum 646.00
100% proctor density.
4.2.2 For grading-II with CBR value not less than 25. To attain Cum 637.00
100% proctor density.
4.2.3 For grading-III with CBR value not less than 20.to attain Cum 632.00
100% proctor density.
4.3 Providing laying spreading and compacting specified
graded sand, gravel (crushed stone) as per Table 400-
1,400-2 or any other course material as per design mix, as
per CBR in sub base course including premixing the
material at OMC in wet mix plant, carriage of mixed
material spreading in uniform layers with motor grader F.E
loader on a prepared base and compacting with vibratory
roller to achieve desired density (as per I.S.2720) including
all material, labor, machinery, lighting guarding, barricading
and maintenance of diversion complete.[MoRTH
specification : Clause 401]. By mechanical means with lead
up to 20 km
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
13
4.8.1 Grading II, 63 mm to 45 mm @ 0.91 cum per 10 Sqm for Cum 1449.00
compacted thickness of 75 mm. (Crusher broken) Stone
screening type 'A'
4.8.2 Grading III, 53 mm to 22.4 mm, @ 0.91 cum per 10 Sqm Cum 1496.00
for compacted thickness of 75 mm. (Crusher broken)
Stone screening type 'B'
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
14
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
15
CHAPTER : R-5
BASES AND SURFACE COURSES (BITUMINOUS)
Item No. Item Description Rate (Rs.)
Unit
2016
5.1 Providing and applying primer coat over prepared surface Sqm 17.00
or granular base with bitumen emulsion SS-1 as per IS:
8887 & manufacturer’s specifications @ 6 kg /10 Sqm with
a self propelled or towed bitumen pressure sprayer
equipped for spraying the material uniformly at specified
rates and temperatures as per MoRTH specification CI 502
& 112 ( Including cleaning of road surface )
5.1.1 Add extra to item No. 5.4 for 1 Kg / 10 Sqm emulsion Sqm 2.00
5.2 Providing and applying tack coat on the prepared surface, Sqm 8.00
with bitumen emulsion RS-1 as per IS : 8887 &
manufacturer’s specifications @ 2 kg /10sqm. With a self
propelled or towed bitumen pressure sprayer equipped for
spraying the material uniformly at specified rates and
temperatures as per MoRTH specification Clause 503 &
112 ( Including cleaning of bituminous road surface )
5.5.1 Add extra to item No. 5.5 for 1Kg / 10 Sqm emulsion Sqm 2.50
5.3 Providing and laying bituminous macadam on prepared
surface with specified graded crushed aggregate as per
table 500-4, grading-1for base / binder course including
loading of aggregates with Front end loader and heating
and mixing of stone aggregate and bitumen (including cost
of anti-stripping compound wherever required) in hot mix
plant transporting the mixed material in tipper and laying
mixed material with sensor paver finisher to the required
level and grade rolling by power roller & vibratory
compactor to achieve the desired density (approved by the
department )excluding cost of primer/tack coat [MoRTH
Specification : Clause 504 & 112] with lead of mix 20 Km.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
16
5.6.1 Grading I (40 mm nominal size) - Bitumen @ 4.0 - 4.5 % of Cum 6065.00
mix (60/70 grade) VG 30 & thickness 50 - 75 mm with lead
of mix material 20km VG 30
5.6.2 Grading II (19 mm nominal size) - Bitumen @ 4.0 - 4.5 % of Cum 6090.00
mix (60/70 grade) VG 30 & thickness 50 - 75 mm with lead
of mix material 20km
5.6.3 Extra rate for carriage of mixed material additional lead
from :-
5.6.3.1 Beyond 20 Km Cum per Km 2.60
5.6.3.2 Extra labour for pre-coating crushed stone chipping in Cum 382.00
H.M.P. 6-10 TPH with bitumen (0.75%to 1%) including
heating and mixing the material and handling the mixed
material within in a lead of 30 meters. By Mechanical
means [MoRTH Specifications: Clause 510 & 112].
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
17
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
18
5.9.1 19 mm nominal chipping size @ 0.015 cum per Sqm & Sqm 66.00
Bitumen @ 1.2 Kg per Sqm
5.9.2 13 mm nominal chipping size @ 0.01 cum per Sqm & Sqm 54.00
Bitumen @ 1.0 Kg per Sqm
5.9.3 10 mm nominal chipping size @ 0.008 cum per Sqm & Sqm 49.00
Bitumen @ 0.9 Kg per Sqm
5.10 Providing and laying open graded premix carpet 20mm
thick (compacted) on prepared surface in a single course
as wearing course composed of specified graded crushed
aggregates as per Table 500-23, heating bituminous binder
@ 14.6 Kg/10 Sqm.(60/70 grade) and aggregates in Hot
Mix Plant (including cost of anti-stripping compound ,
wherever required), transporting the mixed material with
tipper and laying with paver finisher to the required level
and grade, rolling with power roller, 8-10 tonne but
excluding cost of tack and seal coat with lead for mix of
material 20 Km.[MoRTH Specification : Clause 511 & 112]
5.10.1.1 a) In Hot Mix Plant 40-60 TPH, including loading of Sqm 97.00
aggregates with Front end loader bitumen 60/70 grade VG
30
5.10.1.2 b) In Hot Mix Plant 40-60 TPH, including loading of Sqm. 102.00
aggregates with Front end loader bitumen crumb rubber
modified bitumen- CRMB 60
5.10.2.1 a) In mini Hot Mix Plant 6-10 TPH bitumen 60/70 grade VG Sqm 92.00
30
5.10.2.2 b) In mini Hot Mix Plant 6-10 TPH crumb rubber modified Sqm. 97.00
bitumen- CRMB 60
5.11 Providing and laying20mm thick Mix Seal Surfacing on a
prepared surface in a single course composed of specified
graded crushed aggregates as per table (500-26) premixed
with bituminous binder (including cost of anti-stripping
compound , wherever required) with lead of mixed material
up to 1 Km. [MoRTH Specification: Clause 512 & 112) In a
hot mix plant 40-60 TPH with Front end loader, laying with
paver finisher transporting the mixed material up to lead of
20 km by tipper and rolling with power roller 8-10 tonne to
achieve density approved by the department, but excluding
cost of tack coat.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
19
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
20
5.12.1 Providing and applying premix seal coat type "B" Sqm 39.00
comprising of thin application of fine aggregate (0.06 cum
per 10 Sqm) premix with 6.8 Kgs. Per 10 Sqm bitumen
binder (Grade 60/70) (including cost of anti-stripping
compound wherever required) In mini hot mix plant 6-10
TPH and laying with mechanical paver and rolling with
power roller 8-10 tonne including all lead of mix material
( MoRTH Specifications Clause 513)
5.12.3 Providing and laying premix seal coat using hot mix plant
and paver finisher with aggregates of 6.7mm size defined
as 100% passing through 11.20mm sieve and retained on
2.36mm sieve with 0.09 cum per 10 Sqm and 4.5%bitumen
including preparation and transportation of mix, spreading,
laying and rolling etc. complete in all respect including cost
of binder.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
21
5.16 Providing and applying low viscosity bitumen emulsion for Sqm 21.00
sealing cracks less than 3 mm wide or incipient fretting or
disintegration in an existing bituminous surfacing as per
MoRTH specification clause 518 complete as directed by
Engineer in Charge.
5.17 Providing , laying and rolling of bituminous cold mix on
prepared base consisting of a mixture of unheated mineral
aggregate ( as per Table - 500 - 36) and binder (as per
Table - 500 - 37), including mixing in a plant of suitable type
and capacity, transporting, laying by hydrostatic paver
finisher with sensor control, compacting by Pneumatic
tyred roller 12-15 tonne & Smooth wheeled steel roller 6-8
tonne and finishing to specified grades and levels as per
MoRTH specification clause 519 complete as directed by
Engineer in Charge.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
22
5.19.1 Crack width below 6mm using modified binder (PMB - 40) Sqm 45.00
@ 9Kg. Per 10 Sqm crushed stone aggregate 0.11 Cum
per 10 Sqm.
5.19.2 Crack width 6mm to 9mm using modified binder (PMB - Sqm 53.00
40) @ 11 Kg. Per 10 Sqm crushed stone aggregate 0.12
Cum per 10 Sqm.
5.19.3 Crack width above 9mm using modified binder (PMB - 40) Sqm 71.00
@ 15 Kg. Per 10 Sqm crushed stone aggregate 0.12 Cum
per 10 Sqm.
5.20 Providing and laying a bitumen impregnated geotextile Sqm 552.00
layer after cleaning the road surface, geotextile conforming
to requirements of clause 703.3, laid over a tack coat with
1.05 kg per sqm of paving grade bitumen 80 - 100
penetration and constructed to the requirement of clause
703.4.5
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
23
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
23
CHAPTER : R-6
CEMENT CONCRETE PAVEMENTS
Rate (Rs.)
Item No. Item Description Unit
2016
6.1 Construction of dry lean cement concrete Sub- base over a Cum 2151.00
prepared sub-grade with coarse and fine aggregate
conforming to IS: 383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed
15:1, aggregate gradation after blending to be as per table
600-1, cement content not to be less than 150 kg/ cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at
7 days, mixed in a batching plant, transported to site, laid
with a paver with electronic sensor, compacting with 8-10
tonnes vibratory roller, finishing and curing.
6.4 Construction of Base/sub-base using cement, sand, fly ash Cum 2115.00
and coarse aggregates proportioned as per table 4 of IRC:
74/1979 and with water content ratio, slump and compressive
strength as defined in the said table, mix prepared in a
batching and mixing plant and compacted with a vibratory
roller 8-10 tonnes capacity within the time limit laid down vide
clause 7.6.3 of IRC: 74-1979, construction joints properly
formed at the end of day's work, cured for 14 days, all as
specified in IRC: 74-1979 and as per approved plans.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
24
Rate (Rs.)
Item No. Item Description Unit
2016
6.5 Construction reinforced-reinforced, dowel jointed, plain
cement concrete pavement over a prepared sub base with 43
grade cement, coarse and fine aggregate conforming to IS
383, maximum size of coarse aggregate not exceeding 25
mm, replacing cement by fly ash to the extent of 15 per cent
and sand by 10 per cent, mixed in a batching and mixing
plant as per approved mix design, transported to site, laid
with a fixed form or slip form paver, spread, compacted and
finished in a continuous operation including provision of
contraction, expansion, construction and longitudinal joints,
joint filler, separation membrane, sealant primer, joint sealant,
debonding strip, dowel bar, tie rod, admixtures as approved,
curing compound, finishing to lines and grades as per
drawing
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
25
CHAPTER : R-7
GEOSYNTHETICS AND REINFORCED EARTH
Rate (Rs.)
Item No. Item Description Unit
2016
7.1 Construction of sub surface drain 200 mm Dia using RM 3077.00
geotextiles treated with carbon black with physical
properties as given in clause 702.2.3 formed in to a stable
network and a planar geocomposite structure, joints
wrapped with geotextile to prevent ingress of soil, all as
per clause 702 and approved drawings including
excavation and backfilling
7.3 Providing and laying paving fabric with physical Sqm 326.00
requirements as per table 704-2 over a tack coat of paving
grade Bitumen 80-100 penetration, laid at the rate of 1 kg
per sqm over thoroughly cleaned and repaired surface to
provide a water resistant membrane and crack retarding
layer. Paving fabric to be free of wrinkling and folding and
to be laid before cooling of tack coat, brooming and rolling
of surface with pneumatic roller to maximise paving fabric
contact with pavement surface
7.4 Providing, preparing and laying of geogrid crated apron 1 Cum 2294.00
m x 5 m, 600 mm thick including excavation and
backfilling with baffles at 1 metre interval, made with
geogrids having characteristics as per clause 704.2,
joining sides with connectors/ring staples, top corners to
be tie tensioned, placing of suitable cross interval ties in
layers of 300 mm connecting opposite side with lateral
braces and tied with polymer braids to avoid bulging,
constructed as per clause 704.3. filled with stone with
minimum size of 200 mm and specific gravity not less than
2.65, packed with stone spalls, keyed to the foundation
recess in case of sloping ground and laid over a layer of
geotextile to prevent migration of fines, all as per clause
704 and laid as per clause 2503.3 and approved design.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
26
Rate (Rs.)
Item No. Item Description Unit
2016
7.5.1.5 5.Glass reinforced polymer/fiber reinforced RM 276.00
polymer/polymeric strips
7.5.2 Type B - With reinforcing elements of synthetic geogrids Sqm 605.00
using
7.5.2.1 Facing elements of RCC Sqm 1067.00
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
27
CHAPTER : R-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD
APPURTENANCES
Item No. Item Description Rate (Rs.)
Unit
2016
8.1 Supplying and fixing pre cast R.C.C. stones (M-15 mix)
using one percent steel reinforcement, including finishing in
cement sand mortar 1:3, earthwork, cement concrete 1:4:8
engraving letters and numerals, painting with enamel paint
etc. complete as per IRC standard design.
8.1.1 Km. Stone for NH, SH & MDR ( size 35 x110x25 cm) Each 1636.00
8.1.2 5th Km. Stone ( size 50 x152x25 cm) Each 2684.00
8.1.3 200 Meter stone ( size 15 x10x65 cm) Each 473.00
8.1.4 Boundary stone ( size 15cm Dia at top & 20 cm Dia at Each 433.00
bottom & 90 cm high )
8.1.5 Guide stone ( size 20 x15x120 cm) Each 473.00
8.2 S & F cut stone including earthwork, cement concrete 1:4:8
engraving letters and numerals, as per IRC standard design:
8.2.1 Km. Stone for NH, SH & MDR ( size 35 x110x25 cm) Each 1816.00
8.2.2 5th Km. Stone ( size 50 x152.5x25 cm) Each 2979.00
8.2.3 200 Meter stone ( size 15 x15x90 cm) Each 525.00
8.2.4 Boundary stone ( size 15x15x90cm) Each 481.00
8.2.5 Guide stone ( size 20 x15x120 cm) Each 525.00
8.3 Construction of cement concrete kerb with top and bottom
width 115 and 165 mm respectively, 250 mm high in M 20
grade PCC on M-10 grade foundation 150 mm thick,
foundation having 50 mm projection beyond kerb stone,
kerb stone laid with kerb laying machine, foundation
concrete laid manually, all complete as per clause 408
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
28
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
29
8.12 Installation of sign board having the post like mandatory Each 309.00
cautionary & informatory board includes excavation, cement
concrete 1:5:10 (30X30X60) cm and transportation
complete.
8.13 Supplying route Marker reflective sign boards consisting of Each 1410.00
shield marked on M.S. flat 14 gauge of size 60 x 45 cm and
definition plate of 30 x 25 cm, 14 gauge, fixed on mild steel
posts of Angle Iron of 65X65X6mm – 3mtr.long for NH/SH:
Comp. in all respect duly post painted in alternate band of
Black/White synthetic enamel paint & hold fast at bottom
8.14 Supply of flood gauge (water Gauge) as per I.R.C. 67 Each 1322.00
standard 200 cm long fixed on angle iron posts 50x50x6
mm, 2.6 M. long.
8.15 Fixing of flood gauge (water Gauge) in cement concrete M- Each 369.00
15 mix size 30x30x60 cm. complete including transportation
excavation etc. complete
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
30
8.18 Supplying of men at work sign board (folding type) made of Each 1480.00
1.25 mm thick M.S. sheet size 900x900x900 mm painted in
white stove enameled paint and reflective machine cut sheet
Men’s emblem and letter MEN AT WORK in red colours and
additional attachment of size 150x900 mm plate for gang
number and name with white stoving enameled back ground
both plates are fixed on a folding stand of M.S. (heavy) steel
tube of size 13.2 mm outer dia as per IS-1239 (part-I) 1979
duly painted in grey colour and both the plates are painted
on back side in grey enamel paint.
8.19 Supply of ‘L’ type Bollard made out of 1.25 mm thick M.S. Each 1762.00
sheet height 134 cm, welded in circular type ring section
having upper Dia 15 cm. and lower Dia 21 cm with another
attachment of 15x15 cm circular section with 15 cm. face
plate and hold fast at bottom, whole body is processed in
white stoving enamel and red reflective 3 hands, each of 7.5
cm end one reflective sheet of 15 cm. dia provided to it
complete in all respect.
8.20 Supply of Swiss Type Bollard made out of 1.25 mm thick Each 2027.00
M.S. sheet, total height 135 cm, the lower portion is made in
tapered circular section having upper dia 15 cm and lower
dia 20 cm with attachment of one mandatory plate 7 mm
thick & fixed with the help of 7 cm long, 30mm dia chrome
plated M.S. tube this part is fixed on the body with another
attachment of a cap 30x7 cm. whole body is processed in
black stoving enamel and mandatory plate in Azure blue,
with one compulsory keep left arrow with 10mm border
reflective strip each of 7.5 cm on body complete in all
respect.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
31
8.22 Supply of Hazard Marker made out of 2 mm thick M.S. sheet Each 705.00
size 300x300x3 mm framed with angle iron 25x25x3 mm
and fixed on channel posts 75x40x6 mm and hold fast at
bottom whole body is painted in white stoving enamel and 6
Nos., 5 cm dia reflective sheet on white reflective
background with additional border of 1.25 cm all around it.
8.23 Supply of Swiss type of Hazard marker, made out of 2 mm Each 970.00
thick M.S. sheet size of box is 15x15 cm with hold fast at
bottom, the body is painted in orange stoving enamel paint
with white/high intensity grade micro-prismatic type
sheeting, on all four side.
8.24 P & F Delineator with 30 cm. outer dia RCC Hume pipe NP- Each 556.00
2 (As per IS-458/ 1971 ) pipe 1.0 M. Long 40 cm embedded
in cement concrete (1:2:4) block of size 50x50x40 cm.
including excavation up to 40 cm depth. The inside of pipe
shall be filled with C.C. (1:2:4) stone grit max size 20 mm or
less up to the top with semi circular humping. The pipes
shall be painted white/black with enamel paint with red dots
two Nos. on each side
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
32
8.30 Providing and fixing 1.2 meters high GI barbed wire fencing P.Rmt 249.00
with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed
every 3 meters center to center founded in M-15 graded
cement concrete 30cm.x30cm.x60cm, 0.6 meter below
ground level, every 15th post, last but one end post and
corner post shall be strutted on both sides and end post on
one side only and provided with 9 horizontal lines and 2
diagonals interwoven with horizontal wires, fixed with GI
staples, turn buckles etc. complete as per MoRTH
specification Clause 807.
8.31 Providing and fixing 1.8 meter high GI barbed wire fencing P.Rmt 453.00
with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed
every 3 meter center to center founded in M-15 grade
cement concrete 30cm.x30cm.x60cm, 0.6 meter below
ground level, every 15th post, last but one end post and
corner post shall be strutted on both sides and end post on
one side only and provided with12 horizontal lines and 2
diagonals interwoven with horizontal wires, fixed with GI
staples, turn buckles etc. complete as per MoRTH
specification Clause 807.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
33
8.33 Providing, fixing and erecting 50 mm dia tubular steel pipe P.Rmt 1205.00
railing as per IS 1239 in 3 rows duly painted on medium
weight steel channels (ISMC series) 100 mm x 50 mm x 1.2
meter high above ground, 2 mm centre to centre, complete
as per approved drawings as per MoRTH specification Cl.
808.
8.34 Providing, fixing and erecting 50 mm dia painted tubular P.Rmt 704.00
steel pipe as per IS 1239 railing in 3 rows on precast M-20
grade RCC vertical posts 1.8 meter high (1.2 m above GL)
with 3 holes 50 mm dia for pipe, fixed 2 meter centre to
centre, complete as per approved drawing as per MoRTH
specification clause 808.
8.35 Provision of reinforced cement concrete crash barrier at the P.Rmt 2700.00
edges of the road, approaches to bridge structures and
medians, constructed with M-20 grade concrete with HYSD
reinforcement conforming to IRC: 21 and dowel bars 25 mm
dia , 450 mm long at expansion joints filled with pre-moulded
asphalt filler board, keyed to the structure on which it is built
and installed as per design given in the enclosure to MoRTH
Circular No. RW/ NH- 33022/ 1/ 94-DO III dated 24th June
1994 as per dimensions in the approved drawing and at
locations directed by the Engineer , all as specified as per
MoRTH specification Cl. 809.
8.36 Providing and erecting a "W" metal beam crash barrier P.Rmt 2706.00
comprising of 3 mm thick corrugated sheet metal beam rail,
70 cm above road/ ground level, fixed on CRC rolled
channel vertical post, 150 x 75 x 5 mm spaced 2 mm centre
to centre, 1.8 m high, 1.1 m below ground / road level, all
steel parts and fitments to be galvanized by hot dip process,
all fittings to conform to IS: 1367 and IS: 1364 , metal beam
rail to be fixed on the vertical post with a spacer of channel
section 150 x 75 x 5 mm, 330 mm long complete as per
MoRTH specification Clause 810.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
34
8.38 Providing and erecting a wire rope safety barrier with vertical P.Rmt 1990.00
posts of medium weight RS joist (ISMB series) 100 mm x 75
mm (11.50 Kg/ m) 1.50 m long 0.85 m above ground and
0.65 m below ground level, split at the bottom for better grip,
embedded in M-15 grade cement concrete 450 x 450 x 450
mm , 1.50 m centre to centre and with 4 horizontal steel wire
rope 40 mm dia and anchored at terminal posts 15 m apart.
Terminal post to be embedded in M-15 grade cement
concrete foundation 2400 x 450 x 900 mm (depth),
strengthened by a strut of RS joist 100 x 75 mm, 2 m long at
450 inclination and a tie 100 x 8 mm, 1.50 m long at the
bottom, all embedded in foundation concrete as per
approved design and drawing, rate excluding excavation
and cement concrete.
8.39 Providing and erecting anti- glare screen with rectangular P.Rmt 852.00
vanes of size 750 x 500 mm made from MS sheet , 3 mm
thick and fixed on MS angle 50 x 50 x 6 mm at an angle of
450 to the direction of flow of traffic, 1.5 m center to center ,
top edge of the screen 1.75 m above ground level, vertical
post firmly embedded in M-15 cement concrete foundation
0.60 m below ground level , applying 2 coats of paint on
exposed faces , all complete as per approved design and
drawings.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
35
8.44 Construction of a permanent type barricade made with brick Each 7982.00
work in mud mortar, 1.5 m high , 4 m long. 600 mm thick,
plastered with cement mortar 1:6, painted with yellow and
white strips.
8.45 Provision of metal drum/ empty bitumen drum Delineator, Each 380.00
300 mm in diameter, 800 mm high, filled with earth for
stability, painted in circumferential strips of alternate black
and white 100 mm wide fitted with reflectors 3 Nos of 7.5 cm
dia, all as per IRC: SP: 55-2001.
8.46 Positioning of a smart flagman with a yellow vest and a Each 195.00
yellow cap and a red flag 600 x 600 mm securely fastened
to a staff 1 m in length for guiding the traffic.
8.47 Fabrication & assembling of over head gantry & cantilever P.Kg 91.00
type structure as per drawing & design including steel work
in built up tubular trusses , cutting / hoisting, bolting & fixing
in position & applying coat of red oxide paint including
special type of nut, bolts( Bolt up to 750 mm ) and washers
complete & finishing with grey enamel paint .
8.48 Supply of High Intensity retro reflecting Type IV sign plate P.Sqm 11563.00
made out of 2.0 mm thick aluminum sheet face to be fully
covered with blue / green high intensity grade retro reflective
sheet and logo/ matters, boarder made of with similar type of
white sheeting after etching treatment of aluminum sheet ,
the back side is to be painted with epoxy grey paint. The
plate is to be fixed on 40x40x5 mm angle iron frame with
help of aluminum rivets.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
36
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
37
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
38
CHAPTER : R-09
PIPE CULVERTS & CULVERTS
Item No. Item Description Rate (Rs.)
Unit
2016
9.1 Providing and laying mechanically mixed and vibrated
Cement Concrete in foundation up to a depth of 1.5 meters
below ground level and 1.50 meters above Ground/Bed
level.[MoRTH Specification : Clause 1000/1700]
9.1.1 Cement concrete 1:4:8 mix crushed stone aggregates 40mm Cum 2873.00
nominal size.
9.1.2 Cement concrete 1:4:8 mix hand broken stone aggregates Cum 2896.00
20mm nominal size.
9.1.3 Cement concrete 1:3:6 mix crushed stone aggregates 40mm Cum 3461.00
nominal size.
9.1.4 Cement concrete 1:3:6 mix with stone aggregate 20mm Cum 3486.00
crusher broken.
9.2 Providing and laying Plain cement concrete M15 mix with Cum 4012.00
stone aggregate 20mm nominal size mechanically mixed
and vibrated, in foundation up to a depth of 1.50 below
Ground level and or 1.50 meters above ground/bed level.
9.3 Providing and laying Plain cement concrete M15 mix with Cum 4213.00
stone aggregate20mm nominal size mechanically mixed and
vibrated, in superstructure up to 4 meter above 1.5 meter
level from Bed/Ground level.[MoRTH Specification: Clause
1000/1700]
9.4 Providing and laying RCC M25 mix with stone aggregate Cum 4664.00
20mm (nominal size) mechanically mixed and vibrated for
RCC work in slab in superstructure up to 4 meter above 1.5
meter level from Bed/ Ground level, excluding steel
reinforcement but including centering and shuttering laid in
position.[MoRTH Specification : Clause 1000/1700]
9.5 Providing and laying Reinforced cement concrete M20 mix Cum 4513.00
with stone aggregate 20mm nominal size mechanically
mixed and vibrated for bed plates excluding steel
reinforcement but including centering and shuttering, laid in
position .[MoRTH Specification : Clause 1000/700]
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
39
9.9 Providing and laying Brick-on-edge flooring with 1st class Sqm 269.00
bricks (min.10.5 Mpa) including cement slurry in cement
sand mortar 1:4 at all levels.[MoRTH Specification : Clause
1000/1300]
9.10 Providing and laying Coursed / Random Rubble stone
masonry in cement sand mortar 1:3, in foundation up to a
depth of 1.50 meters and also 1.50 meters above Ground
/Bed level [MoRTH Specification : Clause 1000/1400]
9.10.1 Square Rubble Coursed Rubble Masonry (first sort) Cum 4356.00
9.10.2 Random Rubble Masonry Cum 3659.00
9.11 Extra for coursed/Random rubble stone masonry in Cum 119.00
superstructure up to a height of 4 meters or part thereof
above 1.50 meters from Ground /Bed level [MoRTH
Specification : Clause 1000/1400]
9.12 Providing Cement pointing 1:3 deep grooved (cut or Sqm 56.00
weather) on brick / stone and tile work at all levels.[MoRTH
Specification : Clause 1000/1300]
9.13 Providing Cement pointing 1:3, flush on Brick-on-edge floor Sqm 56.00
at all levels.[MoRTH Specification: Clause 1000/1300]
9.14 Plaster on new surface with cement mortar (1:3) including Sqm 112.00
racking of joint etc. complete fine finished 20mm thick.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
40
9.22.1 M-25 grade mix 1:1:2 ( 1 cement : 1 sand : 2 graded stone Cum 5167.00
aggregate)
9.22.2 M-20 grade mix 1:1.5:3 ( 1 cement : 1.5 sand : 3 graded Cum 4774.00
stone aggregate).
9.23 Providing and fixing precast cement concrete coping 1:2:4 Sqm 208.00
mix, 50mm thick complete as per specifications
9.23.1 Providing and laying cement concrete coping 1:2:4 mix, Sqm 189.00
50mm thick complete as per specifications
9.24 Pointing of stone masonry in cement mortar (1:3) raised & Sqm 55.00
cut pointing.
9.25 Plaster on new surface with cement mortar (1:3) including Sqm 112.00
racking of joint etc. complete fine finished 20mm thick.
9.26 Plaster on new surface with cement mortar (1:4) including Sqm 95.00
racking of joint etc. complete fine finished 20mm thick.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
41
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
42
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
42
CHAPTER : R-10
MAINTENANCE OF ROADS
Item No. Item Description Rate (Rs.)
Unit
2016
10.1 Restoration of rain cuts with soil, Morrum, gravel or a Cum 122.00
mixture of these including all leads and lifts and cost of
arrangement of land, clearing the loose soil, benching for
300 mm width, laying fresh material in layers not
exceeding 250 mm and compacting with plate compactor
or power rammer to restore the original alignment levels &
slopes complete as per MoRTH specification Clause 3002.
10.4 Filling pot-holes and patch repairs with open-graded Sqm 101.00
premix surfacing, 20 mm with removal of all failed material,
trimming of completed excavation to provide firm vertical
faces, cleaning of surface, painting of tack coat on the
sides and base of excavation as per Clause 503, back
filling the pot holes with hot bituminous material as per
clause 511 using 60/70 grade bitumen mixed in hot mix
plant 40-60 TPH capacity and carriage with all lead,
compacting with 8-10 tonne smooth wheel roller, trimming
& finishing the surface to form a smooth continuous
surface, all as per MoRTH specification Clause 3004.2
10.4.1 Filling Pot- holes and Patch Repairs with mix seal Sqm 119.00
surfacing type "B", 20mm. Removal of all failed material,
trimming of completed excavation to provide firm vertical
faces, cleaning of surface, painting of tack coat on the
sides and base of excavation as per clause 503, back
filling the pot holes with hot bituminous material as per
clause 511, compacting, trimming and finishing the surface
to form a smooth continuous surface, all as per clause
3004.2
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
43
10.4.3 Filling Pot- holes and Patch Repairs with open - graded Sqm 107.00
Premix surfacing, 20mm followed by seal coat type "B"
using emulsion as binder. Removal of all failed material,
trimming of completed excavation to provide firm vertical
faces, cleaning of surface, painting of tack coat on the
sides and base of excavation as per clause 503, back
filling the pot holes with emulsion rapid setting as binder as
per clause 511, compacting, trimming and finishing the
surface to form a smooth continuous surface, all as per
clause 3004.2
10.5 Filling pot-holes and patch repairs with bituminous Sqm 367.00
concrete, 40 mm with removal of all failed material,
trimming of completed excavation to provide firm vertical
faces, cleaning of surface, painting of tack coat on the
sides and base of excavation as per Clause 503 back
filling the pot holes with hot bituminous material using
60/70 grade bitumen @ 5.0% of total mix & mixed in hot
mix plant 40-60 TPH capacity and carriage with all leads
as per clause 509, compacting with smooth wheel roller 8-
10 tonne, trimming & finishing the surface to form a
smooth continuous surface, all as per MoRTH specification
Clause 3004.2
10.5.1 Filling pot-holes and patch repairs with semi dence Sqm 277.00
bituminous concrete, 25 mm with removal of all failed
material, trimming of completed excavation to provide firm
vertical faces, cleaning of surface, painting of tack coat on
the sides and base of excavation as per Clause 503 back
filling the pot holes with hot bituminous material using
60/70 grade bitumen @ 5% of total mix & mixed in hot mix
plant 40-60 TPH capacity and carriage with all leads as per
clause 509, compacting with smooth wheel roller 8-10
tonne, trimming & finishing the surface to form a smooth
continuous surface, all as per MoRTH specification Clause
3004.2
10.6 Filling of crack using slow- curing bitumen emulsion and R.Mtr. 4.00
applying crusher dust in cracks complete as per MoRTH
specification clause 3004.3.3
10.7 Applying crusher dust to areas of road where bleeding of Sqm 0.90
excess bitumen has occurred as per MoRTH specification
Clause 3004.4.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
44
10.9 Removal of earth from the choked hill side drain and Cum 34.5
disposing it on the valley side manually complete as per
MoRTH specification Clause 3000.
10.10 Clearance of landslides in soil and ordinary rock by a bull- Cum 51.00
dozer D 80 A-12 , 180 HP and disposal of the same on the
valley side as per MoRTH specification Clause 3000.
10.12 Labour charges for patching W.B.M. using crushed / Cum 143
broken aggregates including preparation of pot hole
scarifying and reshaping to the required grade and camber
as per the standard specifications, spreading of material
consolidation with 8-10 tonne power roller, spreading and
consolidation of binding material including cost of fuel and
lubricants and hire charges of T & P
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
45
10.16 Labour charges for digging out of sludge humps on black Sqm 18
topped surface including removal & disposing of the
dismantled material aside up to 50 Mtr. lead.
10.17 Dismantling/Digging out entire road wearing coat of deleted
bituminous surface including removal of dismantled
material aside up to 50 Mtr. lead.
10.18 Cutting of black topped surface up to 30mm depth for Sqm 14
fixing of Kerb/Dand stones/Medians including cleaning of
surface laying bed mortar & removal of dismantled material
with all lead & traffic diversion arrangements complete
10.22 Cutting black topped surface up to 1.5 Mtr. depth including Sqm 386.00
all layers of crust for laying pipe line etc. & making good to
original condition (excluding cost of Bitumen)
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
46
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
47
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
47
CHAPTER : R-11
HORTICULTURE
Item No. Item Description Rate (Rs.)
Unit
2016
11.1 Supply at site of work well-decayed farmyard manure, from Cum 244.00
any available source, approved by the Engineer in charge
including carriage, screening and stacking.
11.2 Supplying at site of work/store Deolied Neem Cake duly Quintal 716.00
packed in used gunny bags.
11.3 Supplying sludge duly stacked at site/store Cum 98.00
11.4 Trenching in specified soil up to a depth of 60 cm. Including
removal and stacking of serviceable materials and than
disposal by spreading and neatly leveling within a lead of
50 meters and making up the trenched area to proper
levels by filling with earth or earth mixed with sludge or/and
farm-yard manure before and after flooding with water
(excluding cost of improved earth and sludge or farm -yard
manure)
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
48
11.13 Turfing slopes of old banks with rough, grassing including 100 Sqm 438.00
preparation of ground, supplying and planting doob grass
roots, 15cm apart, supplying and spreading farm yard
manure at rate of 0.18 cum per 100 Sqm and loosening soil
with kassi.
11.14 Turfing slopes of new banks with rough, grassing including 100 Sqm 350.00
preparation of ground ,supplying and planting doob grass
roots, 15cm apart, supplying and spreading farm yard
manure at rate of 0.18 cum per 100 Sqm and loosening soil
with kassi.
11.15 Making lawns, including ploughing and dragging with 100 Sqm 438.00
'Swagha'(one man with a pair of bullocks), breaking of
clods, removal of rubbish, dressing and supplying Doob
grass roots, and planting at 15cm apart, including supplying
and spreading of farm- yard manure at the rate of 0.18 cum
per 100 Sqm.
11.16 Maintenance of lawns or turfing of slopes (rough grassing) 100 Sqm 4066.00
for a period of one year including watering etc.
11.17 Turfing lawn with fine grassing including ploughing, 100 Sqm 1041.00
dressing including breaking of clods, removal of rubbish,
dressing and supplying and spreading of farm yard manure
at rate 0.60 cum per 100 Sqm.
11.18 Maintenance of lawns with fine grassing for the first year 100 Sqm 5205.00
including watering etc.
11.19 Planting permanent hedges including digging of trenches 100 Meters 11954.00
60cm wide and 45cm deep refilling the excavated earth
mixed with farm yard manure supplied at the rate of 4.65
cum per 100 meters and supplying and planting hedge
plants at 30 cm apart.
11.20 Maintaining the hedges for the first two years including
watering etc. complete.
11.20.1 For first year Meters 62.00
11.20.2 For second year Meters 52.00
11.21 Digging holes in all kinds of soil and refilling the same with
the excavated earth mixed with well decayed farm yard
manure (cost of well decayed farm yard manure to be paid
separately).
11.21.1 Hole 1.2 mm dia and 1.2m deep One hole 36.00
11.21.2 Hole 0.6 m dia and 0.6 m deep Each 16.00
11.22 Planting & maintenance of plants and shrubs.
11.22.1 Plants and shrubs in central verge where verge is 3.0
meters and above (200 plants 800 shrubs in two rows in
one Km).
11.22.1.1 Planting plants and shrubs in central verge. Meter 18.00
11.22.1.2 Maintenance of plants and shrubs in Central verge for one Meter 110.00
year.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
49
11.24 Half brick circular tree guard in second class bricks, internal Each 553.00
dia 1.25 meters, and Ht. 1.2 meter above ground and 0.2
meters below ground, bottom two course laid dry and top
three courses in cement mortar 1:6 (1 Cement, 6 Sand)
and the intermediate courses being in dry honey comb
masonry, as per design, complete.
11.25 Edging with 2nd class bricks laid dry length wise including Meter 13.00
excavation refilling, consolidating with and packing and
spreading nearby, the surplus earth within lead of 50
meters.
11.26 Making tree guard 53 cm dia and 1.3 m high as per design Each 245.00
from empty bitumen drums(supplied by the department at
stock issue rate) including providing and fixing 2 nos. M.S
sheet rings 50 x 0.5 mm with rivets, complete in all
respects.
11.27 Making tree guard 53cm dia and 2 m high as per design Each 438.00
from empty bitumen drums (supplied by the department at
stock issue rate) including providing and fixing four legs 40
cm long of 30 x 3 mm M.S. Flat riveted to tree guard and
providing and fixing 2 nos. M.S. sheet rings 50 x 0.5 mm
with rivets complete in all respects.
11.28 Providing and fixing Wrought iron and Mild steel welded Quintal 4961.00
work (using flats, square bars, tees and channel grills,
grating) frames, gates and tree guards of any size and
design etc. including cost of screens and welding rods or
bolts and nuts, complete, fixed in position but without the
cost of excavation and concrete for fixing which will be paid
separately.
11.29 1.2 meters high fencing with 1.65 meters posts placed at Meter 21.00
every 2.5 to 3 meters apart embedded in cement concrete
blocks and every tenth post to be strutted, provided with 4
horizontal lines of G.I. barbed wire, weighing 9.34 Kg per
100 meters (minimum) and fixed wit G.I. staples, ties to
6mm bar with binding wire or by providing cut, including
drilling holes in the post, complete( excluding the cost of
the post, earthwork and concrete which is payable extra in
the respective item).
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
50
CHAPTER R-12
FOUNDATIONS
Item No. Item Description Unit Rate (Rs.)
2016
12.1 Earth work in excavation for foundation of structure
complete with all lift, dewatering shoring and shuttering
etc. .including refilling of trenches in 25.mm layers,
ramming, watering and disposal of surplus soil within a
lead of 1000 meters, as per drawing and technical
specification.[MoRTH Specification : Clause : 304]
12.3 Back filling behind abutment, wing wall and return wall, in
150mm layers, with mechanical compaction, complete
with all lead and lift, as per drawing and technical
specification. [MoRTH Specification : Clause : 304]
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
51
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
52
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
53
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
54
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
55
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
56
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
57
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
58
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
59
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
60
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
61
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
62
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
63
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
64
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
64
CHAPTER : R-13
SUB STRUCTURE
Item No. Item Description Unit Rate (Rs.)
2016
13.1 Brick Masonry work in cement mortar 1:3 for substructure
complete, with scaffolding, excluding pointing and plastering,
as per drawing and technical specification. [MoRTH
Specification: Section 1300].
13.1.1 Up to 5 meter height Cum 4149.00
13.1.2 For height above 5 meters Cum 4190.00
13.2 Stone masonry work in cement mortar 1:3 for substructure
complete, with scaffolding excluding pointing and plastering
as per drawing and technical specification [MoRTH
Specification: Section 1400]
13.2.1 Coursed Rubble Masonry (Ist sort)
13.2.1.1 Up to 5 meter height Cum 3843.00
13.2.1.2 For height above 5 meter Cum 3881.00
13.2.2 Random Rubble masonry (coursed/un-coursed)
13.2.2.1 Up to 5 meter height Cum 3842.00
13.2.2.2 For height above 5 meter Cum 3880.00
3 Structural Cement concrete for plain concrete/ reinforced
concrete for substructure at any level, complete as per
drawing and technical specification. Using Batching Plant,
Transit Mixture, and Concrete Pump.
13.3.1 Design mix concrete- [MoRTH Specification: Clause
1500(N), & 1700(N)] P.C.C
13.3.1.1 P.C.C.M15 grade
13.3.1.1.1 Up to 5 meter height Cum 4245.00
13.3.1.1.2 For 5m to 10m height Cum 4287.00
13.3.1.1.3 Above 10m height Cum 4330.00
13.3.1.2 P.C.C.M.20 grade
13.3.1.2.1 Up to 5 meter height Cum 4206.00
13.3.1.2.2 For 5m to 10m height Cum 4248.00
13.3.1.2.3 Above 10m height Cum 4290.00
13.3.1.3 P.C.C.M25 grade
13.3.1.3.1 Up to 5 meter height Cum 4603.00
13.3.1.3.2 For 5m to 10m height Cum 4649.00
13.3.1.3.3 Above 10m height Cum 4695.00
13.3.1.4 P.C.C.M.30 grade
13.3.1.4.1 Up to 5 meter height Cum 4645.00
13.3.1.4.2 For 5m to 10m height Cum 4691.00
13.3.1.4.3 Above 10m height Cum 4738.00
13.3.2 Design mix concrete - [MoRTH Specification : Clause
1500&1700] R.C.C
13.3.2.1 R.C.C.M20 grade , including formwork.
13.3.2.1.1 Up to 5 meter height Cum 4206.00
13.3.2.1.2 For 5m to 10m height Cum 4248.00
13.3.2.1.3 Above 10m height Cum 4290.00
13.3.2.2 R.C.C.M25 grade, including formwork.
13.3.2.2.1 Up to 5 meter height Cum 4800.00
13.3.2.2.2 For 5m to 10m height Cum 4848.00
13.3.2.2.3 Above 10m height Cum 4896.00
13.3.2.3 R.C.C.M30 grade, including formwork
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
65
13.10 Supplying fitting and fixing in position true to line and level, Cm3 1.00
Elastomeric Bearing confirming to IRC: 83 (Part II-Section
IX) complete including all accessories as per drawing and
technical specification.[MoRTH Specification Section
2000(N)]
13.11 Supplying fitting and fixing in position true to line and level, Tonne 695.00
POT-PTFE Bearing suitable for biaxial movement as per Capacity
drawing and BS:5400 Sections 9.1 & 9.2 [MoRTH
Specification Section 2000(N)]
12.12 Supplying fitting and fixing in position true to line and level, Tonne 546.00
Sliding Plate Bearing with stainless steel plate sliding on Capacity
stainless steel plate with mild steel matrix [MoRTH
Specification : Section 2000(N)]
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
66
13.14 Providing A.C pipe Weep holes 150mm dia in Masonry/Plain Meter 108.00
Concrete/.Reinforced Concrete abutment, wing wall/return
wall complete as per drawing and technical specification.
[MoRTH Specification Clause 2205]
13.16 Providing and laying of an elastomeric slab steel expansion Meter 15611.00
joint, catering to right or skew (less than 20 deg., moderately
curved with maximum horizontal movement upto 50 mm,
complete as per approved drawings and standard
specifications to be installed b
13.16.1 Providing and laying of compression seal joint consisting of Meter 3262.00
steel armoured nosing at two edges of the joint gap suitably
anchored to the deck concrete and a preformed chloroprene
elastomer or closed cell foam joint sealer compressed and
fixed into the jo
13.16.2 Providing and laying of a strip seal expansion joint catering Meter 13093.00
to maximum horizontal movement upto 70 mm, complete as
per approved drawings and standard specifications to be
installed by the manufacturer/supplier or their authorised
representative ensuring
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
67
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
67
CHAPTER : R-14
SUPERSTRUCTURE
Item No. Item Description Unit Rate (Rs.)
2016
14.1 Structural Cement concrete for reinforced
concrete/PSC in superstructure complete including
steel formwork, scaffolding etc. as per drawing and
technical specification. Using Batching Plant, Transit
Mixture, and Concrete Pump.
Design mix concrete [MoRTH Specification
1500(N)&1700(N)]
14.1.1 M 20 grade
14.1.1.1 Solid slab superstructure
14.1.1.1.1 Height up to 5m Cum 4536.00
14.1.1.1.2 Height from 5m to 10m Cum 4725.00
14.1.1.1.3 Height above 10m Cum 4914.00
14.1.1.2 T-beam and slab Superstructure
14.1.1.2.1 Height up to 5m Cum 4725.00
14.1.1.2.2 Height from 5m to 10m Cum 4914.00
14.1.1.2.3 Height above 10m Cum 5103.00
14.1.2 M 25 grade
14.1.2.1 Solid slab superstructure
14.1.2.1.1 Height up to 5m Cum 5030.00
14.1.2.1.2 Height from 5m to 10m Cum 5240.00
14.1.2.1.3 Height above 10m Cum 5449.00
14.1.2.2 T-beam and slab Superstructure
14.1.2.2.1 Height up to 5m Cum 5240.00
14.1.2.2.2 Height from 5m to 10m Cum 5449.00
14.1.2.2.3 Height above 10m Cum 5659.00
14.1.3 M 30 grade
14.1.3.1 Solid slab superstructure
14.1.3.1.1 Height up to 5m Cum 5094.00
14.1.3.1.2 Height from 5m to 10m Cum 5306.00
14.1.3.1.3 Height above 10m Cum 5518.00
14.1.3.2 T-beam and slab Superstructure
14.1.3.2.1 Height up to 5m Cum 5306.00
14.1.3.2.2 Height from 5m to 10m Cum 5518.00
14.1.3.2.3 Height above 10m Cum 5730.00
14.1.4 M 35 grade
14.1.4.1 Solid slab superstructure
14.1.4.1.1 Height up to 5m Cum 5135.00
14.1.4.1.2 Height from 5m to 10m Cum 5352.00
14.1.4.1.3 Height above 10m Cum 5570.00
14.1.4.2 T-beam and slab Superstructure
14.1.4.2.1 Height up to 5m Cum 5352.00
14.1.4.2.2 Height from 5m to 10m Cum 5570.00
14.1.4.2.3 Height above 10m Cum 5787.00
14.1.4.3 Box girder and balanced cantilever superstructure
14.1.4.3.1 Height up to 5m Cum 6005.00
14.1.4.3.2 Height from 5m to 10m Cum 6440.00
14.1.4.3.3 Height above 10m Cum 6875.00
14.1.5 M 40 grade
14.1.5.1 Solid slab/Voided slab superstructure
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
68
14.3 Providing and laying High tensile steel wires/strands at Tonne 140948.00
any level including all accessories for stressing,
stressing operations and grouting complete as per
drawing and technical specification.[MoRTH
Specification 1800(N)]
14.4 Reinforced cement concrete wearing coat at any level
including formwork and reinforcement completed as
per drawing and technical specification. [MoRTH
Specification 2202(N),1500(N)&1700(N)]
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
69
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
70
CHAPTER : R-15
RIVER TRAINING AND PROTECTION WORK
Item No. Item Description Unit Rate (Rs.)
2016
15.1 Providing and laying specified Apron complete as per
drawing and technical specification. [MoRTH Specification :
Clause: 2503]
15.1.1 Boulder/Quarry stone not less than 40 kg (Specific gravity Cum 774.00
not less than 2.65)
15.1.2 Boulder/Quarry stone not less than 40 kg , in wire crates, Cum 2415.00
3x1.5x1.25 meter with wire diameter not less than 4mm
mesh not more than 150mm.
15.1.3 Cement concrete blocks (in M-15 grade) Size Cum 3640.00
0.50x0.50x0.50m each complete with form work etc.
[MoRTH Specification: Clause:2504]
15.2 Providing and laying graded stone aggregate Filter Material Cum 550.00
underneath pitching on slopes complete as per drawing
and technical Specification [MoRTH Specification : Clause
2504]
15.3 Providing and laying Pitching on slopes complete as per
drawing and technical specification [MoRTH Specification
Clause 2504]
15.3.1 With R.R Stone, weighing not less than 40 Kg, thickness Cum 774.00
not less than 150mm (Specific gravity not less than 2.65)
15.3.2 With Cement Concrete block M15 grade, complete with Cum 3706.00
form work etc. [MoRTH Specification: Clause: 2504,1700]
15.4 Providing and laying Flooring Rubble stone/ C.C M15 block
over bedding complete as per drawing and technical
specification. [MoRTH Specification: Clause 2505,1700]
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
71
15.8 Providing and constructing Gambian structures for erosion Cum 4692.00
control, river training works and protection works with wire
crates of size 2 m x 1 m x 0.3 m each divided into 1 m
compartments by cross netting, made from 4 mm
galvanized steel wire @ 32 Kg per 10 Sqm having
minimum tensile strength of 300 Mpa conforming to IS :
280 and galvanizing coating conforming to IS: 4826 ,
woven into mesh with double twist, mesh size not
exceeding 100 mm x 100 mm filled with boulders with least
dimension of 200 mm, all loose ends to be securely tied
with 4 mm galvanized steel wire complete as per MoRTH
specification clause 2503.3
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
72
CHAPTER : R-16
REPAIR & REHABILITATION
Item No. Item Description Rate (Rs.)
Unit
2016
16.1 Removal of existing cement concrete wearing coat manually or Sqm 324.00
with the help of jack hammers including its disposal within a
lead of 1000 meters, complete as per technical specification
without causing any detrimental effect to any part of the bridge
structure (MoRTH specifications clause 2809,100)
16.7 Repair of concrete crash barrier with cement concrete of M-30 Mtr 165.00
grade by cutting and trimming the damaged portion to a regular
shape, cleaning the area to be repaired thoroughly, applying
cement concrete after erection of proper form work
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
73
16.8.2 Replacement of forged steel roller bearing complete as per tonne 437.00
Technical Specification including Lifting of superstructure span capacity
by jacking up from below i.e. by placing the jacks on
pier/abutment caps for all span length, Supplying, fitting and
fixing in position true to line and level forged steel roller bearing
conforming to IRC: 83(Pt.-1) section IX and clause 2003 of
MoRTH specifications complete including all accessories as per
drawing and Technical Specifications
16.8.3 Replacement of sliding plate bearing with PTFE complete as tonne 607.00
per Technical Specification including Lifting of superstructure capacity
span by jacking up from below i.e. by placing the jacks on
pier/abutment caps for all span length, Supplying, fitting and
fixing in position true to line and level sliding plate bearing with
PTFE surface sliding on stainless steel complete including all
accessories as per drawing and Technical Specifications and
BS: 5400, section 9.1 & 9.2 (for PTFE) and clause 2004 of
MoRTH Specifications.
16.8.5 Replacement of sliding plate bearing with mild steel matrix tonne 607.00
complete as per Technical Specification including Lifting of capacity
superstructure span by jacking up from below i.e. by placing the
jacks on pier/abutment caps for all span length, Supplying,
fitting and fixing in position true to line and level sliding plate
bearing with stainless steel plate sliding on stainless steel plate
with mild steel matrix complete including all accessories as per
drawing and Technical Specifications.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
74
16.9 Providing and laying strip seal expansion joint catering to Mtr 15693.00
maximum horizontal movement up to 70mm complete as per
approved drawing and IRC specifications including acceptance
testing as specified to be installed under supervision of a
specialist manufacturer (MoRTH Sp." 2600) including
arrangement of traffic during replacement of joint.
16.12 Providing and filling joint filler compound confirming to IS: 1834 Rmt 20.00
for each 25mm width & 25mm depth
16.13 Replacement of Expansion Joints complete as per standard Rmt 2833.00
drawings of MoRTH complete as per specification including
removal of old damaged expansion etc.
16.14 Providing external prestressing with high tensile steel
wires/strands including drilling for passage of prestessing steel,
all accessories for stressing and stressing operation and
grouting complete as per drawing and Technical Specification
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
75
16.16 Applying epoxy mortar over leached, honey combed and Sqm 498.00
spalled concrete surface and exposed steel reinforcement
complete as per Technical Specification
16.17 Applying pre-packed cement based polymer mortar of strength Sqm 755.00
45 Mpa at 28 days for replacement of spalled concrete including
removal of old damaged concrete and all arrangement for
applying it complete as per MoRTH specifications.
16.18 Applying Epoxy bonding of new concrete to old concrete Sqm 671.00
including removal of ld damaged concrete and all arrangement
for applying it complete as per MoRTH specifications.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
75
CHAPTER : R-17
GEOTEXTILE MISC ITEMS
S.No. Description Unit Item Rate Labour
2016 Rate
2016
1 Providing and Inserting indigenously manufactured
Prefabricated Vertical Drain with Polypropylene core
and wrapped with Non-woven geotextile in the very soft
clay for quick consolidation.
(a) Type-A (TFI - Tech Drain TD3520F) with RPM 111.0 31.0
polypropylene core and wrapped with non-woven
geotextile, minimum 100mm width & 4mm core
thickness. As per the approved Comparative
Statement.
(b) Type-B (TFI - Tech Drain TD5020F) with RPM 131.0 31.0
polypropylene core and wrapped with non-woven
geotextile, minimum 100mm width & 5mm core
thickness. As per the approved Comparative
Statement.
2 Providing and Laying CE Marked Needle punched and
mechanically bonded Non-woven Geotextile
indigenously manufactured from high quality
Polypropylene stable fibers (continuous filament will not
be accepted) on the prepared subgrade for separator
cum filtration cum drainage application with necessary
overlaps as per drawing.
(a) Type I (TFI-Tech Geo PR15), minimum width 5.0 P.Sqmt. 131.0 31.0
Meter. As per the approved Comparative Statement.
(b) Type II (TFI - Tech Geo PR20) , minimum width 5.0 P.Sqmt. 148.0 31.0
Meter. As per the approved Comparative Statement
(c) Type-III (TFI- TechGeo PR25), minimum width 5.0 P.Sqmt. 164.0 31.0
Meter. As per the approved Comparative Statement.
(d) Type-IV (TFI - TechGeo PR30), minimum width 5.0 P.Sqmt. 191.0 31.0
Meter. As per the approved Comparative Statement.
(e) Type-V (TFI - TechGeo PR40), minimum width 5.0 P.Sqmt. 242.0 31.0
Meter. As per the approved Comparative Statement
(f) Type-VI (TFI - TechGeo PR50), minimum width 5.0 P.Sqmt. 294.0 31.0
Meter. As per the approved Comparative Statement
(g) Type-VII - (TFI - TechGeo PR60), minimum width P.Sqmt. 346.0 31.0
5.0 Meter. As per the approved Comparative Statement
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
76
(a) Tech Pave (TFI- Tech Pave C040), minimum width P.Sqmt. 180.0 31.0
5.0 Meter. As per the approved Comparative
Statement.
3 Providing and Laying Fiberglass Geogrid of
indigenously manufactured from high quality glass fiber
strands and coated with a polymer modified bitumen as
reinforcement to asphalt overlay flexible pavements
and asphalt over distressed rigid PCC pavements.
(a) Type 50 (TFI - Tec glass 50 ken X 50 ken) minimum P.Sqmt. 191.0 31.0
width of 2.5 Meter/ 5.0 Meter. As per the approved
Comparative Statement
(b) Type 100 (TFI - Tec glass 100kN X 100 ken), P.Sqmt. 294.0 31.0
minimum width of 2.5 Meter/ 5.0 Meter. As per the
approved Comparative Statement
(c) Type 200 (TFI - Tec glass 100 kN X 200 kN, P.Sqmt. 369.0 31.0
minimum width of 2.5 Meter/ 5.0 Meter. As per the
approved Comparative Statement
4 Providing and Laying CE marked woven multifilament
Polyester Geotextile indigenously manufactured from
high quality polyester filament yarns for soil
reinforcement and stabilization on the prepared
subgrade with necessary overlaps and as per drawing
(a) Type A (TFI 3100: 100 kN/m X 50 kN/m), minimum P.Sqmt. 171.0 31.0
width of 5.0 Meter. As per the approved Comparative
Statement.
(b) Type B (TFI 3200: 200 kN/m X 50 kN/m), minimum P.Sqmt. 205.0 31.0
width of 5.0 Meter. As per the approved Comparative
Statement.
5 Providing and Laying Copper & polypropylene rope
Gabions indigenously manufactured from high strength
rope for slope protection and erosion control for river
bank and sea-shore protection
(a) Type-A (TFI 1x1x1), size 1mx1mx1m with P.No. 1859.0 61.0
100mmx100mm aperture size. As per the approved
Comparative Statement.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
77
(a) TechBox (TFI- Steel Wire gabion of size 1.00M X Cum 3302.0 61.0
1.00M X 1.00M). As per the approved Comparative
Statement.
6 Providing and Laying CE Marked Knitted and PVC
coated Polyester Biaxial Geogrid for Basal
Reinforcement indigenously manufactured from
selected high tenacity polyester yarn with high
molecular weight (> 25000 g/mol), and low carboxyl
end group (<30mmol/kg) for soil reinforcement
application for stabilization, requirement of geogrid
strength in both direction with granular fill (extruded PP
geogrids & Polyester strips & Geostrips & Steel Strips
not allowed). Coating of Geogrid/ Reinforcing
geosynthetic material with LDPE, Latex, Bitumen and
any other coating is not accepted.
(a) Type I = TFI - TechGrid TGB 30(30 kN/mx30 KN/m P.Sqmt. 168.0 31.0
Ultimate tensile strength), minimum width of 5.0 Meter,
as per the approved Comparative Statement.
(b) Type II = TFI - TechGrid TGB 40(40 kN/mx40 Kn/m P.Sqmt. 198.0 31.0
Ultimate tensile strength), minimum width of 5.0 Meter,
as per the approved Comparative Statement.
(c) Type III = TFI - TechGrid TGB 60(60 kN/m x 60 P.Sqmt. 242.0 31.0
KN/m Ultimate tensile strength), minimum width of 5.0
Meter, as per the approved Comparative Statement.
(d) Type IV = TFI - TechGrid TGB 90(90 kN/mx90 KN/m P.Sqmt. 294.0 31.0
Ultimate tensile strength), minimum width of 5.0 Meter,
as per the approved Comparative Statement.
(e) Type V = TFI - TechGrid TGB 11(30 kN/m x 60 P. Sqmt. 211.0 31.0
KN/m Ultimate tensile strength), minimum width of 5.0
Meter, as per the approved Comparative Statement.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
78
(a) Type-A (TFI - TGC 60kN/m X 60kN/m), minimum P.Sqmt. 242.0 31.0
width of 5.0 Meter. As per the approved Comparative
Statement.
(b) Type-B (TFI - TGC 90 kN/m X 90 kN/m) , minimum P.Sqmt. 302.0 31.0
width of 5.0 Meter. As per the approved Comparative
Statement
8 Providing and Laying CE Marked Knitted and PVC
coated Polyester Uniaxial Geogrid, indigenously
manufactured from selected high tenacity polyester
yarn with high molecular weight (> 25000 g/mole), and
low carboxyl end group (<30mmol/kg) for reinforced soil
wall and reinforced slope application with granular fill
as per design prepared by technology provider of
reinforced earth wall and slope.(Reinforcing
geosynthetic product of extruded PP geogrids &
Polyester strips & Geostrips & Steel Strips not allowed
and not accepted). The reinforced earth wall and slope
should have 100% coverage of Knitted and PVC
coated Polyester Uniaxial Geogrid. (Coating of Geogrid
and Geosynthetic reinforcing material with LDPE,
Latex, Bitumen and any other coating will not be
allowed).
(a) Type-1(TFI - TechGrid TGU 40) (40 Kn/m Ultimate P.Sqmt. 159.0 31.0
tensile strength), minimum width of 5.0 M, as per the
approved Comparative statement.
(b) Type-II (TFI - TechGrid TGU 60) (60 KN/m Ultimate P.Sqmt. 180.0 31.0
tensile strength), minimum with of 5.0 Meter, as per the
approved Comparative Statement
(c) Type-III (TFI - TechGrid TGU80) (80 KN/m Ultimate P.Sqmt. 205.0 31.0
tensile strength), minimum with of 5.0 Meter, as per the
approved Comparative Statement.
(d) Type-IV(TFI - TechGrid TGU 100)(100 KN/m P.Sqmt. 242.0 31.0
Ultimate tensile strength), minimum with of 5.0 Meter,
as per the approved Comparative Statement
(e) Type-V(TFI - TechGrid TGU 120)(120 KN/m P.Sqmt. 278.0 31.0
Ultimate tensile strength), minimum with of 5.0 Meter,
as per the approved Comparative Statement.
(f) Type-VI (TFI - TechGrid TGU 150)(150 KN/m P.Sqmt. 309.0 31.0
Ultimate tensile strength), minimum with of 5.0 Meter,
as per the approved Comparative Statement.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
79
(a) Type I (TFI 1100), minimum width of 5.0 Meter. As P.Sqmt. 131.0 31.0
per the approved Comparative Statement.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
80
(a) Type I (TFI - 5100), minimum width of 5.3 Meter. As P. Sqmt. 87.0 31.0
per the approved Comparative Statement.
(b) Type II (TFI - 5200), minimum width of 5.3 Meter. As P. Sqmt. 101.0 31.0
per the approved Comparative Statement.
(c) Type III (TFI - 5300), minimum width of 5.3 Meter. P. Sqm. 120.0 31.0
As per the approved Comparative Statement.
11 Providing and Laying Needle punched and
mechanically bonded Non-woven Paving Fabric
indigenously manufactured from high quality
Polypropylene stable fibers (continuous filament will not
be accepted) over a tack coat of paving grade bitumen
80-100 preparation, laid at the rate of 1 kg per Sqm
over thoroughly cleaned and repaired surface to
provide a water resistant membrane and crack
retarding layer. Paving fabric to be laid before cooling
of tack coat, brooming and rolling of surface with
pneumatic roller to maximize paving fabric contact with
pavement surface as per drawing and product approval
certificate from M/s CRRI, New Delhi.
(a) TechPave (TFI- TechPave C040), minimum width P.Sqmt. 180.0 31.0
5.0 Meter. As per the approved Comparative
Statement.
12 Providing and Fixing Gabions of only TFI made of
mechanically woven hexagonal shaped wire mesh of
type, 10X12cm with edges selvedge made of heavily
(Zinc + PVC) coated GI wires as per BS:443, mesh
wire 2.70mm Ǿ edge wire 3.4mm Ǿ of only TFI/
TechBox type filled with 20 kg to 50 kg weight trap
stones including conveying with all the leads & lifts and
placing at required places in required line, level, slope,
section as directed etc. to complete Reinforced Earth
Walls & Slopes as per Drawing
(a) TechBox (TFI- Steel Wire gabion of size 1.00M X Cum 3302.0 61.0
1.00M X 1.00M). As per the approved Comparative
Statement.
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
81
EE PWD NH Dn.-I, Jaipur TA to SE, PWD NH Circle, Jaipur AO, PWD NH Circle, Jaipur SE, PWD NH Circle, Jaipur
This softawre is based on Standard Data book for analysis of Rates for
Road and Bridge Works
This Software runs on Microsoft Excel
INPUT- Input the usage rates of Plant & Machinery, labour and material
as applicable
SUMMARY - In this sheet summary of all the rates analysized is
presented
ANALYSIS- The analysis has been presented in 16 nos. of spread sheets