Document No. | MS_ MECHANICAL JOINT(3)
Rev. 0
ire a eae
WASKITA
METHOD STATEMENT
OF
MECHANICAL JOINT INSTALLATION USING
FUJIBOLT
TYPE-R and TYPE-R II. Points and Rules
Attachment
Table of Contents
Work Description
. Location to be Applied (Column Starter Bars)
2.1, Location to be Applied ..
2.2. Criteria Application of Mechanical Joints (Fujibolt and Splice Sleeve).
2.3. _ Distinction of Type R and R II
BARN
. Dimensions of FD Grip Joint R and RII Type.
3.1, _FD Grip Joint R,
3.1.1. Dimension of Hexagonal Sleeve..
3.1.2. Product Dimension (After Clamping) ..
3.2. FD Grip Joint RI..
3.2.1. Dimension of Round Sleeve.
3.2.2, Product Dimension (After Clamping) ..
Baoan
|. Standard Operation Procedure
4.1. Material Preparation
4,2. Marking on Rebar
4,3. Setting Sleeve...
Checking Sleeve Insertion into Rebar.
Checking Marks.
Special Care for FD Grip Joint R.
4.4 Clamping...
45 Reporting and Inspection
4.5.1 Inspection of Sleeve Diameter after Clamping.
4.5.2 Inspection of Marking Position after Clamping
4.5.3 Inspection of Existence of Non-Clamped Sections after Clamping
4.5.4 Recording of Inspection Sheet
5.1, Points and Rules Prior to the Wo!
5.2, Points and Rules Prior to Clamping ..
5.3. Points and Rules Prior After Clamping
. Hydraulic Pump and Clamping Tool Instruction, 45
6.1, Specification of Hydraulic Pump for FD Grip Joint R and RII Type: 5
6.2. Specification of Clamping Tool for FD Grip Joint R and RII Types. 16
6.3. Shape of Clamping Die.
6.4. Use Metho
6.5. Precaution
7.1 Inspection Sheet ..
7.2 Qualification Certificat 20
7.3. Material Brochure1, Work Description
‘This method statement describes the detailed procedure for splicing column main rebar
using two (2) types of mechanical joints which are FD Grip Joint R Type (Hexagonal
Sleeve) and FD Grip Joint R II Type (Round Sleeve). These mechanical joints are
inserted into a specified length of rebar and are clamped using the hydraulic clamping
machine. Due to the clamping process, the sleeve and rebar adhere, and the tensile
force and compression force are conveyed by the shearing force of the rebar ridges and
abrasion between the sleeve and the rebar. Mechanical joints for 029, D25 and D22
shall be FD Grip Joint R Type, while mechanical joints for D32 shall be FD Grip Joint R II
Type in accordance with the material approval.
2. Location to be Applied (Column Starter Bars)
2.1. Location to be Applied