Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
STAND
STA ARD SPECIFICA
DARD TIONS:
SPECIFICATIONS:
Belt Driven Live Roller Conveyors
Bed Lengths: 5’-0” or 10-0” increments.
Overall Widths: 18”, 24”, 30” 36”, and 42”
Between Frame
15”, 21”, 27”, 33”, and 39”
Widths:
Model 26 - Belt Drive Belt Widths:
12” and 16”
Driven Live Roller
Roller Centers: 3”, 4”, and 6”
Roller Bed: Made up of 1.9” diameter x 16 gauge galvanized pop-out rollers
OPTIONAL EQUIPMENT
EQUIPMENT :
UIPMENT: in 6” x 12 gauge steel channel. Bed sections are bolted together
Motors: 3/4 or 1 horsepow er.
Motors with splice plates.
Under side Take-Up: A two pulley
Underside Drive / Pulley: Underside center drive with 8” diameter pulley crowned and fully
device used to give additional lagged with 1-7/16” diameter shaft.
(18”) belt take-up. It mounts to Tail Pulley: 4” diameter, crowned, with 1” diameter shaft.
underside of bed in same
manner as center drive. Bearings: Self aligning sealed flange ball bearings.
Belt Speeds: From 25 FPM to 135 Snub Rollers: 2-1/8” dia. x 11 ga. with 7/16” hex shaft.
FPM. Belt: PVC-120 black friction surface belt.
Guar
Guard d Rails: Consult accessories Take-Up: 6” take-up bolts.
section of this brochure for more
Motor: 1/2 H.P. 230/460 V., 3 phase, totally enclosed C-faced.
details.
Suppor
Support ts: Consult accessories Belt Speed: 60 FPM.
section of this brochure for more Speed Reduction: Right angle worm gear reducer connected to motor by #50 roller
details. chain and sprockets.
Ceiling Hang
Hangeers: Consult
rs Paint: Advanced Uniflo Dark Blue.
accessories section of this
Supports: 29” - 41” measuring from floor to top of belt.
brochure for more details.
P aint: Special colors, powder coat. Capacity: Live load per foot up to 40 lbs. for 1/2 H.P. motor based on 60
FPM. See capacity chart on page 6 of this brochure for more
Electrical Contr
Controols: Consult factory.
details.
20”
2-1/8” Dia.
ADJ. 29”-41”
Snub Roller 4” Dia.
4” Dia. Tail Pulley 8” Dia. Drive
Take-Up
Pulley 2” 3”
Pulley 16”
34-1/2”
Overall Width
Between Frame Width
3/8”
Bearings
Chain
6” Guard
CONVEYOR WEIGHTS:
Overall Widths 18” 24” 30” 36” 42”
Between Frame Widths 15” 21” 27” 33” 39”
3” 10’ Conveyor Weight (Lbs.) 544# 638# 732# 825# 919#
Centers Weight Per Foot (Lbs.) 31# 35# 39# 44# 49#
4” 10’ Conveyor Weight (Lbs.) 517# 602# 687# 771# 846#
Centers Weight Per Foot (Lbs.) 28# 30# 32# 33# 34#
6” 10’ Conveyor Weigth (Lbs.) 490# 566# 642# 717# 797#
Centers Weight Per Foot (Lbs.) 23# 25# 27# 28# 29#
2
Advanced Uniflo Technologies, Ltd.
STAND
STA ARD SPECIFICA
DARD TIONS:
SPECIFICATIONS:
Belt Driven Live Roller Curves
Overall Widths: 18”, 24”, 30” 36”, and 42”
Between Frame
15”, 21”, 27”, 33”, and 39”
Widths:
Radius: 32-1/2” radius for 24” and 30”, 48” for 36” and 42” overall width.
Degrees: 90o, 45o, and 30o
Rollers: 2-1/2” x 1-11/16” x 14 ga. tapered galvanized steel.
Model 35 - Belt Driven Live Roller Curve
Roller Channel: 6” x 1-1/2” x 12 gauge painted steel channel.
Drive: Continuous v-belt, underside drive.
OPTIONAL Take-up Sheaves: For adjusting the proper belt tension on the v-belt.
EQ UIPMENT
QUIPMENT
UIPMENT: : Pressure Sheaves: 3-1/16” outside diameter x 3/8” Bore.
Motor
Motorss: 3/4 or 1 horsepow er Motor: 1/2 H.P. 230/460 V., 3 phase, totally enclosed.
Guar
Guardd Rails: Consult accessories Speed Reduction: Right angle worm gear reducer with v-belt from motor.
section of this brochure for Roller Speed: 60 FPM.
more details.
Tangents: Up to 10’ maximum length for small radius (32.5”), and up to 5’
Suppor
Support ts: Consult accessories
maximum for large radius (48”).
section of this brochure for
more details. Slave Drive: May be slave driven from Models 40, 41, 91, or by another Model
Ceiling Hang
Hangeers: Consult
rs 35.
accessories section of this Paint: Advanced Uniflo Dark Blue.
brochure for more details. Guards: Pinch points are guarded for increased safety.
P aint: Special colors, powder
Supports: 29” - 41” measuring from floor to top of roller.
coat.
Electrical Contr ols: Consult
Capacity: Live load per foot up to 40 lbs. for 1/2 HP motor based on 60 FPM.
Contro
factory. See capacity chart on page 6 of this brochure for more details.
24" 36"
o o
45 30
o o
TOP VIEW - 45o CURVE TOP VIEW - 30 CURVE
90
Overall Width
Between Frame Width
3
Advanced Uniflo Technologies, Ltd.
STAND
STA ARD SPECIFICA
DARD TIONS:
SPECIFICATIONS:
Belt Driven Live Roller Spurs
Model 40 Model 41
Overall Widths: 18”, 24”, 30”, 36”, and 42”
Between Frame
15”, 21”, 27”, 33”, and 39”
Widths:
Radius: 32-1/2” radius for 24” and 30”, 48” for 36” and 42” overall width.
Model 40 - Belt Driven Spur Curve
Degrees: 45o and 30o
Rollers: 1.9” dia. x 16 ga. galvanized 1.9” dia. x 14 ga. galvanized
rollers, and 2.5” dia. x 1-11/16” rollers, with sealed, grease
dia. x 14 ga. galvanized steel packed ball bearings and 7/16”
tapered rollers with sealed, spring loaded hex shaft.
grease packed ball bearings and
7/16” spring loaded hex shaft.
Model 41 - Belt Driven Straight Spur Roller Bed: 6” x 1-1/2” x 12 gauge painted steel channel.
Drive: Continuous v-belt, underside drive, or slave driven.
OPTIONAL EQUIPMENT
EQUIPMENT :
UIPMENT: Take-Up Sheaves: For adjusting the proper tension on the v-belt.
Motor
Motors s: 3/4 or 1 horsepow er. Pressure Sheaves: 3-1/16” outside dia. x 3/8” Bore.
Guar
Guard d Rails: Consult accessories section of Motor: 1/2 H.P. 230/460 V., 3 phase, totally enclosed.
this brochure for more details. Speed Reduction: Right angle worm gear reducer with v-belt from motor.
Suppor
Support ts: Consult accessories section of this Roller Speed: 60 FPM.
brochure for more details. Paint: Advanced Uniflo Dark Blue.
Ceiling Hang
Hange ers: Consult accessories section
rs Butt Couplings: Weld-on.
of this brochure for more details.
Guards: Pinch points are guarded for increased safety.
P aint: Special colors, powder coat.
Electrical Contr ols: Consult factory.
Supports: 29” - 41” measuring from floor to top of roller.
Contro
Capacity: Live load per foot up to 40 lbs. for 1/2 HP motor based on 60 FPM.
See capacity chart on page 6 of this brochure for more details.
STANDARD SPECIFICATION DRAWINGS:
Model 41 - Live Roller Straight Spur
Model 40 - Live Roller Spur Curve Horizontal Horizontal Take-up Horizontal Take-up
Horizontal Take-up 30o 45o
30o Angle Take-up 45o Angle Angle
Angle
“Y”
“L” “Y”
“Y” “Y” “L”
“R”
“R”
“X” “X”
“X” “X”
TOP VIEW TOP VIEW
TOP VIEW TOP VIEW
30o STRAIGHT SPUR 45o STRAIGHT SPUR
30o SPUR CURVE 45o SPUR CURVE
Overall Width Overall Width
Between Frame 16-1/2” Between Frame 16-1/2”
Width
3/8” ADJ. 3/8” ADJ.
Width
29”-41” 29”-41”
6” 6”
ROLLER MOUNTING END VIEW ROLLER MOUNTING END VIEW
CONVEYOR WEIGHTS: DIMENSION CHART:
Overall Widths 18” 24” 30” 36” 42”
Between Dimension Charts for
15” 21” 27” 33” 39”
Frame Widths Model 40 and Model 41 above
Model 40 41 40 41 40 41 40 41 40 41 are located
45o 337# 178# 400# 189# 400# 200# 574# 210# 637# 214# on page six (6) of this brochure.
30o 325# 212# 396# 221# 452# 230# 576# 240# 647# 244#
Tangent wt./ft. 23# 32# 41# 50# 59#
4
Advanced Uniflo Technologies, Ltd.
STAND
STA ARD SPECIFICA
DARD TIONS:
SPECIFICATIONS:
Belt Driven Live Roller Accumulating Conveyors
Model 91 Model 94 - Zero Pressure
Lengths: 5’-0” or 10’-0” increments.
Overall Widths: 18”, 24”, 30”, 36”, and 42”
Between Frame
15”, 21”, 27”, 33”, and 39”
Widths:
Model 91 - Belt Driven Drive Belt: 6” wide black PVC-120 belt with 12” long 4” wide black PVC-120 drive belt with an
Accumulating starter pads on 30’ centers. “A” section v-belt vulcanzied to one sied.
Rollers: 1.9” dia. x 16 ga. galvanized rollers with sealed, grease packed ball bearings and
7/16” spring loaded hex shaft.
Roller Centers: 3” and 4”
Frame: 6” x 1-1/2” x 12 ga. formed steel channel.
Model 94 - Belt Driven Drive / Pulley: 8” dia. underside center drive, fully lagged 8” dia. without crown and v-groove
Zero Accumulation
with 1-7/16” dia. shaft. pulley.
Tail Pulley: 4” dia. crowned with 1” dia. shaft. 4” dia. with 1-3/16” dia. shaft and
OPTIONAL v-groove pulley.
EQUIPMENT
QUIPMENT :
UIPMENT: Snub Idler: 2-1/8” dia. x 11 ga. roller. 2-1/8” dia. x 11 ga. roller.
Take-Up: 10” take-up bolts at tail pulley.
Motors: 3/4 or 1
Motors
horsepow er. Pressure Rollers: 1.9” dia. x 16 ga. galvanized rollers with 1-15/16” dia. x 1/4” skate wheels with
sealed, grease packed ball bearings and greased, semi-precision bearings.
Guar
Guard d Rails, Suppor ts,
Support
Ceiling Hang
Hangeer
rss: 7/16” spring loaded hex shaft.
Consult accessories Accumulation Pneumatic zero pressure accumulation
section of this Zones: Minimum pressure. zones on standard 24” or 36” centers.
brochure for more Air operated.
details. Sensing Rollers: N/A 1” x 18 gauge in 24” or 36” zones. One
P aint: Special colors, sensing roller per zone.
powder coat.
Motor: 1/2 H.P. 230/460 V., 3 phase, totally enclosed C-faced.
Electrical Contr ols:
Contro Speed: 60 FPM.
Consult factory.
Speed Reduction: Right angle reducer connected to drive Right angle heavy duty worm gear
pulley by #50 roller chain and sprockets. speed reducer.
Guards: Pinch points are guarded for increased safety.
Supports: 29” - 41” measuring from floor to top of roller.
Capacity: 100# maximum load per foot, 5500# maximum load with 8” dia. drive at 60 FPM.
21”
19.38”
2-1/8” Dia. ADJ.
ADJ. 4” Dia. Take-
Snub Roller 29”-41”
21”-41” Up Pulley
1.9” Dia. Return
8” Dia. Drive
Roller
Pulley
16” 34-1/2”
34” 16”
CONVEYOR WEIGHTS:
12” 24” 24” 24” 24” 12”
(Weights in Pounds) Model 91 Model 94 zone zone zone zone
Overall Widths 18” 24” 30” 36” 42” 18” 24” 30” 36” 42”
Between Frame Widths 15” 21” 27” 33” 39” 15” 21” 27” 33” 39”
10’ Conveyor Weight 338# 399# 460# 522# 587# 499# 549# 599# 649# 699#
Weight Per Foot 22# 27# 32# 38# 44# 35# 40# 45# 50# 55#
5
Advanced Uniflo Technologies, Ltd.
To calculate horsepower requirements for Slider Bed conveyors, follow these steps:
Step #1 - Calculate the live load per foot (weight of product per foot) of your application.
Step #2 - Determine Belt Pull Factor from Chart A below.
Step #3 - Use Belt Pull Factor with Chart B below to determine horsepower requirement for your application.
CHART A - Belt Pull Factor for Belt Driven Live Roller Conveyors
6
Advanced Uniflo Technologies, Ltd.
7
Your authorized Advanced Uniflo Technologies Distributor can give you more information about gravity skate-
wheel and roller conveyor and other Advanced Uniflo Technologies products and what makes Advanced Uniflo
Technologies The Right Choice when fulfilling your material handling needs. Publications that are available
include:
(Member Affiliations)
Distributed By:
E-mail: uniflo@gplains.com
Internet: http://www.advanceduniflo.com