the flow from the test string to the well Certified and conform to NACE test equipment. It allows, through MR-01-75 for sour service various valving, access to the test string applications. for wire line and coil tubing operations Fitted with wing blocks to allow and the ability to pump fluids into the ease of connecting flow lines test string. Additional Equipment: The surface test tree comprises of four valves: Each surface test tree can be fitted Master Valve – allows isolation of with the following additional units: the test string. Swab Valve – allows introduction Lower Master Valve to of tool strings into the test string. completely isolate the surface Flow Valve- actuated and test tree if required. operates as a safety valve. Chemical Injection Sub. Kill Valve – allows introduction of Check Valves fluids from pumping services. Stiff Joints The surface test tree also comprises of a swivel to allow rotation of the test string, handling subs to enable compatibility with elevators and cross overs to allow connections to various test strings
PTIMS-OPS-DS-003 EQUIPMENT DATA SHEET
Page 1 Specifications Type A Type B Type C Description Surface Test Tree Surface Test Tree Surface Test Tree Service H2S to NACE MR-01-75 H2S to NACE MR-01-75 H2S to NACE MR-01-75
Pressure Rating 10,000 psi 15,000 psi 15,000 psi
Temperature Rating -20 º F to 240 º F -20 º F to 240 º F -20 º F to 240 º F
Tensile Rating 400,000lbs at maximum 400,000lbs at maximum 400,000lbs at maximum
working pressure working pressure working pressure
Valves 3 1/16” 10,000psi FC 3 1/16” 15,000psi FC 4 1/16” 15,000psi FC
Type or equivalent Type or equivalent Type or equivalent Flanges 3 1/16” BX 154 3 1/16” BX 155 4 1/16” BX 155
Kill – 2” 1502 thread Kill – 2” 1502 thread Kill – 4” Hub Tubing – 5 3/8” four stub Tubing – 6 1/8” four stub Tubing – 6 1/8” four stub ACME box ACME box ACME box Top - 5 3/8” four stub Top - 6 1/8” four stub Top - 6 1/8” four stub ACME box ACME box ACME box Other sizes and specifications are available on request.