Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. Install EPLAN.
2. Copy the license file "SN-U10066.EGF" from the folder EPLAN P8 2.6 patch Windows
x32x64 to C: \ Users \ Public \ EPLAN \ Common
Copy the version.dll file to: C: \ Program Files \ EPLAN \ Platform \ 2.6.3 \ Bin
2.1 Set the file attributes: read only and system (so that the license does not
fly).
3. Delete the driver of the protection key "HL Hasp" through the control panel
(Control Panel -> Uninstall the program) (I did not find it on my own at 8.1)
4. Install the new haspdinst.exe driver (see readme.html) (HASPUserSetup.exe)
5. Run 10066.reg and add to the registry
6.1. Run the command prompt as administrator! execute bcdedit -set TESTSIGNING ON,
without turning off the console, go to the next item
6.2. After entering the test mode, sign muktikey.sys with the dseo13b.exe utility.
6.3. enter "shutdown.exe / r / o / f / t 00", the computer will go into reboot,
then turn on the brain and stamp on the sequence "Action selection-> Diagnostics->
Additional settings-> Download options-> Disable mandatory driver check ".
We press "reboot" (I have not flipped this option, if I have such menus, see
6.3.1).
6.3.1 enter the bootmenupolicy legacy in the admin console "{current}",
bootmenupolicy legacy, reboot and before the start of windows loading violently we
trample on F8, in the appeared menu we choose "disable mandatory signature
verification of drivers"
6.4. Open the device manager, we find (I have three) new devices. We try to update
each driver, we specify the path to the folder ... \ EPLAN P8 2.6 patch Windows
x32x64 \ Release.
After installing the driver, it is possible to repeat the procedure of this item
again for the detected device Virtual USB MultiKey
If everything is done correctly, the SafeNetInc.Hardlock key and SafeNetInc.USB key
appear in the device manager - USB controllers.
6.5. Reboot.
6.6. Starting EPLAN.
10. Turn on the Windows test mode: Run dseo13b.exe and select "Enable Test Mode".
Exit the program through EXIT.
11. Reboot. Before starting Windows, we press and hold the F8 button. Selecting
Disable mandatory driver signature verification
12. Installing Hardlock drivers: Run dseo13b.exe and select "Sign a system file".
Enter C: \ Windows \ System32 \ Drivers \ multikey.sys.
Through the Device Manager, we update the driver to an unidentified device, which
it will find in the Windows / System32 /
1. Install EPLAN.
2. Run the command prompt with administrator privileges and register 2 commands in
turn.
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Reload.
3. Install HASPUserSetup with administrator rights. Reload.
4. Launch EPLAN2.1 2.3 2.4 2.5 2.6 X64 crack administrator rights. Copy version.dll
to "From: \ Program Files \ EPLAN \ Platform \ 2.6.3 \ Bin". Reload.
5. Go to the device manager, there will be an undefined driver hang, click the
driver update and specify the update path from the Virtual USB Multikey Dongle
64bit driver folder. Reload.
6. Launch EPLAN, select the required license.