Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
≤125 ≥200
d coarse Bolt Bolt Bolt min. max. max. min. max. min. min. nom. min. min. max.
pitch 125-200
M10 1.50 26 32 45 0.15 0.6 11.20 9.64 10.0 14.47 17.59 6.40 0.4 15.57 16.00
M12 1.75 30 36 49 0.15 0.6 13.70 11.57 12.00 16.47 19.85 7.50 0.6 17.57 18.00
M14 2.00 34 40 53 0.15 0.6 15.70 13.57 14.00 19.15 22.78 8.80 0.6 20.16 21.00
M16 2.00 38 44 57 0.2 0.8 17.70 15.57 16.00 22.00 26.17 10.00 0.6 23.15 24.00
M18 2.50 42 48 61 0.2 0.8 20.20 17.57 18.00 24.85 29.56 11.50 0.6 26.16 27.00
M20 2.50 46 52 65 0.2 0.8 22.40 19.48 20.00 27.70 32.95 12.50 0.8 29.16 30.00
M22 2.50 50 56 69 0.2 0.8 24.40 21.48 22.00 31.35 37.29 14.00 0.8 33.00 34.00
M24 3.00 54 60 73 0.2 0.8 26.40 23.48 24.00 33.25 39.55 15.00 0.8 35.00 36.00
M27 3.00 60 66 79 0.2 0.8 30.40 26.48 27.00 38.00 45.20 17.00 1.0 40.00 41.00
M30 3.50 66 72 85 0.2 0.8 33.40 29.48 30.00 42.75 50.85 18.70 1.0 45.00 46.00
M33 3.50 - 78 91 0.2 0.8 36.40 32.38 33.00 46.55 55.37 21.00 1.0 49.00 50.00
M36 4.00 - 84 97 0.2 0.8 39.40 35.38 36.00 51.11 60.79 22.50 1.0 53.80 55.00
M39 4.00 - 90 103 0.3 1.0 42.40 38.38 39.00 55.86 66.44 25.00 1.0 58.80 60.00
M42 4.50 - 95 109 0.3 1.0 45.60 41.38 42.00 59.95 71.30 26.00 1.2 63.10 65.00
M45 4.50 - 102 115 0.3 1.0 48.6 44.38 45.00 64.70 76.95 28.00 1.2 68.10 70.00
M48 5.00 - 108 121 0.3 1.0 52.60 47.38 48.00 69.45 82.60 30.00 1.6 73.10 75.00
M52 5.00 - 116 129 0.3 1.0 56.60 51.26 52.00 74.20 88.25 33.00 1.6 78.10 80.00
M56 5.50 - - 137 0.3 1.0 63.00 55.26 56.00 78.66 93.56 35.00 2.0 82.80 85.00
M60 5.50 - - 145 0.3 1.0 67.00 59.26 60.00 83.41 99.21 38.00 2.00 87.0 90.00
M64 6.00 - - 153 0.3 1.0 71.00 63.26 64.00 88.16 104.86 40.00 2.0 92.80 96.00
1
Dinstock Ltd, Unit C1 Hortonwood 10 Welcome to the world of fasteners from...
Telford, Shropshire TF1 7ES, United Kingdom
Tel. +44 (0)1952 676700 Fax. +44 (0)1952 676800
Email. sales@dinstock.com
Hexagon Head Bolts
EN ISO 4014 (DIN 931) High Tensile
EN ISO 4014 (DIN931) Dimensions of bolts (concluded)
d M10 M12 M14 M16 M18 M20 M22 M24 M27 M30
l ls lg ls lg ls lg ls lg ls lg ls lg ls lg ls lg ls lg ls lg
nom. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.
d M33 M36 M39 M42 M45 M48 M52 M56 M60 M64
l ls lg ls lg ls lg ls lg ls lg ls lg ls lg ls lg ls lg ls lg
nom. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.
2
Dinstock Ltd, Unit C1 Hortonwood 10 Welcome to the world of fasteners from...
Telford, Shropshire TF1 7ES, United Kingdom
Tel. +44 (0)1952 676700 Fax. +44 (0)1952 676800
Email. sales@dinstock.com
Hexagon Head Bolts
EN ISO 4014 (DIN 931) High Tensile
Specification for bolts and reference standards Mechanical and physical properties
Characteristic Standard Property Class
Material Steel Mechanical or physical property 8.8 10.9 12.9
General International ≤ M16 > M16
Standards ISO 8992
Requirements nom. 800 1000 1200
Tensile Strength
Tolerance 6g min. 800 830 1040 1220
Thread
International Standard ISO 724, ISO 965-1 Yield Strength 0.2% offset non- nom. 640 640 900 1080
proportional elongation min. 640 660 940 1100
3mm ≤ d ≤ 39mm: 8.8, 10.9
d < 3mm: as agreed
Property Classa Percentage elongation after
Mechanical d > 39mm: as agreed min. 12 12 9 8
fracture for machined test piece
Properties
International 3mm ≤ d ≤ 39mm: ISO 898-1
Standards Stress Under Proof Load nom. 580 600 830 970
d < 3mm and d > 39mm
Requirements for electroplating are All units are displayed as newton per square millimeter (N/mm²)
covered in ISO 4042
3
Dinstock Ltd, Unit C1 Hortonwood 10 Welcome to the world of fasteners from...
Telford, Shropshire TF1 7ES, United Kingdom
Tel. +44 (0)1952 676700 Fax. +44 (0)1952 676800
Email. sales@dinstock.com