Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
5
• Two travel speeds • TOPS cab with heat and windshield - engine pre-heating
.41
R1
5 0°
• Blade wipers • Independent boom-swing control
FRONT SWING RADIUS WITH OFF-SET BOOM • Swing boom • One single key • Swing lock pin
640
Cab/Canopy mm 1.360 1.420 • Hydraulic hammer circuit and 2-way - fuel level • External electric plug
attachments up to the boom - engine oil level
• PPC servocontrols - engine oil pressure
°
90
1.820 (1.905)
OPTIONAL EQUIPMENT
• Rubber shoes • TOPS-FOPS canopy • Biodegradable
• 1.750 mm digging arm • Cab front protection • Digging buckets range
• Completion of attachment’s hydraulic • Cab FOPS protection (300 ÷ 650 mm)
circuit up to the arm with quick • Super Deluxe seat • Ditch cleaning bucket (1.300 mm)
5.160 (5.410)
5.090 (5.155)
1.415 1.415 coupler (only for cab) • Hydraulic hammer
3.750 (4.020)
2.500
PC35R-8
1.405 (1880)
1.450
355
580
280
1.610
1.605
2.335 (2.695)
3.150 (3.495)
WORKING EQUIPMENT
Bucket Width Weight Number Arm
(ISO 7451) m3 mm kg of teeth 1.350 mm 1.750 mm
0,035 300 55 2 O O
0,07 400 65 3 O O
0,095 (std) 500 80 4 O O
0,12 600 90 5 O O
0,13 650 95 5 O X
This table is based on the lateral stability at the maximum outreach with full bucket.
- O with material density up to 1,8 t/m3; - X non usable.
LIFTING CAPACITY
Machine with canopy, rubber shoes and 80 kg bucket
A- Distance from machine’s center B- Heigt at bucket pin
LOWERED BLADE
Full
PC35R-8
A 2m 3m 4m extended
Arm lenght B 360° Front 360° Front 360° Front 360°
NET POWER
3m
2m
-
1.150
-
*1.910
580
580
* 630
* 810
440
390
*600
*620
440
340
Komatsu Utility Europe
Head Office
M I N I - E X C AVAT O R SAE J1349
via Atheste 4 21 kW - 28,2 HP
L=1.350 mm 1m 1.175 *1.960 630 * 920 390 *660 340 35042 Este (Padova) - Italy
0m 1.170 *1.900 630 *1.040 390 *710 340 Tel. +39 0429 616111 OPERATING WEIGHT
-1 m 1.100 *1.880 580 *920 390 *650 340 Fax +39 0429 601000
www.equipmentcentral.com From 3.575 kg
L=1.750 mm 0 m 1.050 *1.750 550 *880 340 *630 290
utility@komatsu.it to 3.670 kg
- Data are based on ISO 10567 standard. Above lifting capacities include a 25% safety margin and don’t exceed 87% of the actual
capacity. Values with asterisk (*) are referred to hydraulic capacities.
- In accordance with European norm EN 474-5, the machine is not qualified to lift loads heavier than 1.000 kg. unless it is equipped
with appropriate safety devices. Lifting operations with lowered blade are allowed only with safety valve on blade cylinder. stp - www.stp.it 947033818 - GB - 03/2003
5 This specifications sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.
PC35R-8
PC35R-8 M I N I - E X C AVATO R MINI-EXCAVATOR PC35R-8 M I N I - E X C AVATO R
Total Comfort Routine maintenance takes just a few minutes and is extremely Hydraulic motors
simple to perform, without requiring any special tool. travel ...................................................................25,0 MPa (250 bar) ELECTRIC SYSTEM
Designed with the utmost care in every minimum detail, the driving swing...................................................................16,5 MPa (165 bar)
The design of the engine allows all the maintenance operations Operating voltage .......................................................................12 V
position offers the maximum operating comfort. Easy access, comfort, to be performed from one side only. The counterweight can be easily
Hydraulic cylinders bore x stroke
Battery ......................................................................................80 Ah
boom .............................................................................80 x 540 mm
ergonomic controls, an efficient monitor for controlling the main functions opened to clean the radiators. The use of special bushings arm ................................................................................75 x 595 mm Alternator ....................................................................................40 A
and visibility in all directions. The cab offers excellent comfort and bucket............................................................................65 x 490 mm Starter .....................................................................................1,2 kW
on the arms has made it possible to extend the greasing intervals.
visibility on the work area. The innovative design of the sliding door boom rotation ................................................................85 x 635 mm
blade .............................................................................90 x 120 mm
permits operation in all conditions, minimizing the risks
of accidental contact. Bucket breakout force (ISO 6015):
Arm 1.350 mm..................................................2.876 daN (2.935 kg)
Arm 1.750 mm..................................................2.876 daN (2.935 kg)
Arm breakout force (ISO 6015): REFILLS
Arm 1.350 mm..................................................1.862 daN (1.900 kg) Fuel tank ..................................................................................51,5 l
Arm 1.750 mm.................................................1.555 daN (1.587 kg) Radiator and system ..................................................................6,8 l
Digging equipment are fully controlled by PPC servo-controls. Engine oil ...................................................................................6,9 l
All movements are stopped by lifting the safety levers on the tiltable Final reduction gears (for each side) .........................................1,0 l
cases. Hydraulic oil tank .........................................................................33 l
2 3 4
PC35R-8
PC35R-8 M I N I - E X C AVATO R MINI-EXCAVATOR PC35R-8 M I N I - E X C AVATO R
Total Comfort Routine maintenance takes just a few minutes and is extremely Hydraulic motors
simple to perform, without requiring any special tool. travel ...................................................................25,0 MPa (250 bar) ELECTRIC SYSTEM
Designed with the utmost care in every minimum detail, the driving swing...................................................................16,5 MPa (165 bar)
The design of the engine allows all the maintenance operations Operating voltage .......................................................................12 V
position offers the maximum operating comfort. Easy access, comfort, to be performed from one side only. The counterweight can be easily
Hydraulic cylinders bore x stroke
Battery ......................................................................................80 Ah
boom .............................................................................80 x 540 mm
ergonomic controls, an efficient monitor for controlling the main functions opened to clean the radiators. The use of special bushings arm ................................................................................75 x 595 mm Alternator ....................................................................................40 A
and visibility in all directions. The cab offers excellent comfort and bucket............................................................................65 x 490 mm Starter .....................................................................................1,2 kW
on the arms has made it possible to extend the greasing intervals.
visibility on the work area. The innovative design of the sliding door boom rotation ................................................................85 x 635 mm
blade .............................................................................90 x 120 mm
permits operation in all conditions, minimizing the risks
of accidental contact. Bucket breakout force (ISO 6015):
Arm 1.350 mm..................................................2.876 daN (2.935 kg)
Arm 1.750 mm..................................................2.876 daN (2.935 kg)
Arm breakout force (ISO 6015): REFILLS
Arm 1.350 mm..................................................1.862 daN (1.900 kg) Fuel tank ..................................................................................51,5 l
Arm 1.750 mm.................................................1.555 daN (1.587 kg) Radiator and system ..................................................................6,8 l
Digging equipment are fully controlled by PPC servo-controls. Engine oil ...................................................................................6,9 l
All movements are stopped by lifting the safety levers on the tiltable Final reduction gears (for each side) .........................................1,0 l
cases. Hydraulic oil tank .........................................................................33 l
2 3 4
PC35R-8
PC35R-8 M I N I - E X C AVATO R MINI-EXCAVATOR PC35R-8 M I N I - E X C AVATO R
Total Comfort Routine maintenance takes just a few minutes and is extremely Hydraulic motors
simple to perform, without requiring any special tool. travel ...................................................................25,0 MPa (250 bar) ELECTRIC SYSTEM
Designed with the utmost care in every minimum detail, the driving swing...................................................................16,5 MPa (165 bar)
The design of the engine allows all the maintenance operations Operating voltage .......................................................................12 V
position offers the maximum operating comfort. Easy access, comfort, to be performed from one side only. The counterweight can be easily
Hydraulic cylinders bore x stroke
Battery ......................................................................................80 Ah
boom .............................................................................80 x 540 mm
ergonomic controls, an efficient monitor for controlling the main functions opened to clean the radiators. The use of special bushings arm ................................................................................75 x 595 mm Alternator ....................................................................................40 A
and visibility in all directions. The cab offers excellent comfort and bucket............................................................................65 x 490 mm Starter .....................................................................................1,2 kW
on the arms has made it possible to extend the greasing intervals.
visibility on the work area. The innovative design of the sliding door boom rotation ................................................................85 x 635 mm
blade .............................................................................90 x 120 mm
permits operation in all conditions, minimizing the risks
of accidental contact. Bucket breakout force (ISO 6015):
Arm 1.350 mm..................................................2.876 daN (2.935 kg)
Arm 1.750 mm..................................................2.876 daN (2.935 kg)
Arm breakout force (ISO 6015): REFILLS
Arm 1.350 mm..................................................1.862 daN (1.900 kg) Fuel tank ..................................................................................51,5 l
Arm 1.750 mm.................................................1.555 daN (1.587 kg) Radiator and system ..................................................................6,8 l
Digging equipment are fully controlled by PPC servo-controls. Engine oil ...................................................................................6,9 l
All movements are stopped by lifting the safety levers on the tiltable Final reduction gears (for each side) .........................................1,0 l
cases. Hydraulic oil tank .........................................................................33 l
2 3 4
PC35R-8 M I N I - E X C AVATO R PC35R-8 M I N I - E X C AVATO R
Dimensions STANDARD EQUIPMENT PC
• Steel shoes • 2-way equipment circuit - cooling system temperature light
35R-8
5
• Two travel speeds • TOPS cab with heat and windshield - engine pre-heating
.41
R1
5 0°
• Blade wipers • Independent boom-swing control
FRONT SWING RADIUS WITH OFF-SET BOOM • Swing boom • One single key • Swing lock pin
640
Cab/Canopy mm 1.360 1.420 • Hydraulic hammer circuit and 2-way - fuel level • External electric plug
attachments up to the boom - engine oil level
• PPC servocontrols - engine oil pressure
°
90
1.820 (1.905)
OPTIONAL EQUIPMENT
• Rubber shoes • TOPS-FOPS canopy • Biodegradable
• 1.750 mm digging arm • Cab front protection • Digging buckets range
• Completion of attachment’s hydraulic • Cab FOPS protection (300 ÷ 650 mm)
circuit up to the arm with quick • Super Deluxe seat • Ditch cleaning bucket (1.300 mm)
5.160 (5.410)
5.090 (5.155)
1.415 1.415 coupler (only for cab) • Hydraulic hammer
3.750 (4.020)
2.500
PC35R-8
1.405 (1880)
1.450
355
580
280
1.610
1.605
2.335 (2.695)
3.150 (3.495)
WORKING EQUIPMENT
Bucket Width Weight Number Arm
(ISO 7451) m3 mm kg of teeth 1.350 mm 1.750 mm
0,035 300 55 2 O O
0,07 400 65 3 O O
0,095 (std) 500 80 4 O O
0,12 600 90 5 O O
0,13 650 95 5 O X
This table is based on the lateral stability at the maximum outreach with full bucket.
- O with material density up to 1,8 t/m3; - X non usable.
LIFTING CAPACITY
Machine with canopy, rubber shoes and 80 kg bucket
A- Distance from machine’s center B- Heigt at bucket pin
LOWERED BLADE
Full
PC35R-8
A 2m 3m 4m extended
Arm lenght B 360° Front 360° Front 360° Front 360°
NET POWER
3m
2m
-
1.150
-
*1.910
580
580
* 630
* 810
440
390
*600
*620
440
340
Komatsu Utility Europe
Head Office
M I N I - E X C AVAT O R SAE J1349
via Atheste 4 21 kW - 28,2 HP
L=1.350 mm 1m 1.175 *1.960 630 * 920 390 *660 340 35042 Este (Padova) - Italy
0m 1.170 *1.900 630 *1.040 390 *710 340 Tel. +39 0429 616111 OPERATING WEIGHT
-1 m 1.100 *1.880 580 *920 390 *650 340 Fax +39 0429 601000
www.equipmentcentral.com From 3.575 kg
L=1.750 mm 0 m 1.050 *1.750 550 *880 340 *630 290
utility@komatsu.it to 3.670 kg
- Data are based on ISO 10567 standard. Above lifting capacities include a 25% safety margin and don’t exceed 87% of the actual
capacity. Values with asterisk (*) are referred to hydraulic capacities.
- In accordance with European norm EN 474-5, the machine is not qualified to lift loads heavier than 1.000 kg. unless it is equipped
with appropriate safety devices. Lifting operations with lowered blade are allowed only with safety valve on blade cylinder. stp - www.stp.it 947033818 - GB - 03/2003
5 This specifications sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.
PC35R-8 M I N I - E X C AVATO R PC35R-8 M I N I - E X C AVATO R
Dimensions STANDARD EQUIPMENT PC
• Steel shoes • 2-way equipment circuit - cooling system temperature light
35R-8
5
• Two travel speeds • TOPS cab with heat and windshield - engine pre-heating
.41
R1
5 0°
• Blade wipers • Independent boom-swing control
FRONT SWING RADIUS WITH OFF-SET BOOM • Swing boom • One single key • Swing lock pin
640
Cab/Canopy mm 1.360 1.420 • Hydraulic hammer circuit and 2-way - fuel level • External electric plug
attachments up to the boom - engine oil level
• PPC servocontrols - engine oil pressure
°
90
1.820 (1.905)
OPTIONAL EQUIPMENT
• Rubber shoes • TOPS-FOPS canopy • Biodegradable
• 1.750 mm digging arm • Cab front protection • Digging buckets range
• Completion of attachment’s hydraulic • Cab FOPS protection (300 ÷ 650 mm)
circuit up to the arm with quick • Super Deluxe seat • Ditch cleaning bucket (1.300 mm)
5.160 (5.410)
5.090 (5.155)
1.415 1.415 coupler (only for cab) • Hydraulic hammer
3.750 (4.020)
2.500
PC35R-8
1.405 (1880)
1.450
355
580
280
1.610
1.605
2.335 (2.695)
3.150 (3.495)
WORKING EQUIPMENT
Bucket Width Weight Number Arm
(ISO 7451) m3 mm kg of teeth 1.350 mm 1.750 mm
0,035 300 55 2 O O
0,07 400 65 3 O O
0,095 (std) 500 80 4 O O
0,12 600 90 5 O O
0,13 650 95 5 O X
This table is based on the lateral stability at the maximum outreach with full bucket.
- O with material density up to 1,8 t/m3; - X non usable.
LIFTING CAPACITY
Machine with canopy, rubber shoes and 80 kg bucket
A- Distance from machine’s center B- Heigt at bucket pin
LOWERED BLADE
Full
PC35R-8
A 2m 3m 4m extended
Arm lenght B 360° Front 360° Front 360° Front 360°
NET POWER
3m
2m
-
1.150
-
*1.910
580
580
* 630
* 810
440
390
*600
*620
440
340
Komatsu Utility Europe
Head Office
M I N I - E X C AVAT O R SAE J1349
via Atheste 4 21 kW - 28,2 HP
L=1.350 mm 1m 1.175 *1.960 630 * 920 390 *660 340 35042 Este (Padova) - Italy
0m 1.170 *1.900 630 *1.040 390 *710 340 Tel. +39 0429 616111 OPERATING WEIGHT
-1 m 1.100 *1.880 580 *920 390 *650 340 Fax +39 0429 601000
www.equipmentcentral.com From 3.575 kg
L=1.750 mm 0 m 1.050 *1.750 550 *880 340 *630 290
utility@komatsu.it to 3.670 kg
- Data are based on ISO 10567 standard. Above lifting capacities include a 25% safety margin and don’t exceed 87% of the actual
capacity. Values with asterisk (*) are referred to hydraulic capacities.
- In accordance with European norm EN 474-5, the machine is not qualified to lift loads heavier than 1.000 kg. unless it is equipped
with appropriate safety devices. Lifting operations with lowered blade are allowed only with safety valve on blade cylinder. stp - www.stp.it 947033818 - GB - 03/2003
5 This specifications sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.