Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
2.) Copy from the Drive X: Office Standards / KE Drafting Standards May 28, 2007 /
KE std details by Ion / Template . . .
KE - A2 Template
KE Logo - latest
3.) Place the said three files in one folder previously named ;
4.) Open the file KE A2 Title Block XREF Base and edit the info on title block
5.) Then open the file KE A2 Template and edit all the other data on title block
6.) After this, rename KE A2 Template with your desired structural name ,
7.) Create New Layout Tabs and rename them ( example say , Strip Footing Detail 1 )
8.) After creating the tabs, go back to model space and create layers
9.) Layers S1 – red 0.10 , S2 – yellow 0.20 , S3 green 0.30 , S4 cyan 0.40 , S5 blue
0.50,
S6 0.60.
10.) After finished drawing in model space , go to the Layout Tab and produce viewport ,
using command MV ( indicate its corner ) and after that click model space.
11.) If the scale you want to use is 1:20 , type command “Z” ( Zoom ) and enter 1/20xp
12.) Draw text and dimensions in paper space Use layer 0 – dim or 0 – text
PSLTSCALE
Type: Integer
Saved in: Drawing
Initial value: 1
0 No special linetype scaling. Linetype dash lengths are based on the drawing units of
the space (model or paper) in which the objects were created. Scaled by the global
LTSCALE factor.
1 Viewport scaling governs linetype scaling. If TILEMODE is set to 0, dash lengths are
based on paper space drawing units, even for objects in model space. In this mode,
viewports can have varying magnifications, yet display linetypes identically. For a
specific linetype, the dash lengths of a line in a viewport are the same as the dash
lengths of a line in paper space. You can still control the dash lengths with LTSCALE
When you change PSLTSCALE or use a command such as ZOOM with PSLTSCALE set
to 1, objects in viewports are not automatically regenerated with the new linetype
scale. Use the REGEN or REGENALL command to update the linetype scales in each
viewport.
If you use 80cl , will follow pen thickness assignment depending on the color you
assign during printing
If you use Arial Narrow , same pen thickness whatever the color during printing
TEXT STYLE
Standard – can be assigned properties like for KE arialnw
Before pasting a block , change the layer and the block will follow the color and
properties of that layer ( but properties cannot be changed )
For you to later on change the properties of the block to be pasted, before
pasting this block, change the layer to 0 .
If you explode a block , the objects inside the block will retain the original color
and properties , when they were made as a block
ELEV
SWEEP ( Path )
Type PL , then click any first point on the “PLAN” plane then the second point
will be the end point of the Topo Line and finally trace the Topo Line by clicking
the other endpoint
Thus , you were able to trace over ( above the 3D Topo Line ) with a Polyline
lying on the “PLAN” plane
Double click the text and click this to obtain the pull down menu
Then click the character you want , to insert this character , click Select then
click Copy