Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Breadboard / Accessories
Specifications
1. Solderless breadboard : AD-222 7. Two pulser switches :
Interconnected nickel plated 2712 tie points, fits all components A,A,B,B output
with DIP sizes and solid wire AWG #22-30 (0.3-0.8 mm). It can be Output level :
changed and replaced for different purposes and can be connected TTL : HI = 5V, LO = 0.1V
with demonstration panel. Therefore, it is very convenient for both CMOS : HI = + VDC, LO = 0.1V
teachers and students. 8. Eight data switches :
2. DC power supply : TTL : HI = 5V, LO= 0V
Fixed DC output : + 5V, 1 A CMOS : HI = +VDC, LO = 0V
Fixed DC output : -5V, 300 mA 9. Digital probe :
Variable DC output : +3V ~ +15V, 500mA Set mode selector switch to "TTL" position
Variable DC output : - 3V ~ - 15V, 500mA
3. Mode selector switch : Logic
Input Level Display
When the switch is put on "TTL" or "CMOS" position, the input Level
or output of pulse generator, pulser switches, 8 bits data switches, LO <0.8±0.2V L
digital probe, 8 bit LED display will meet the HI or LO level of "TTL" HI >2.3±0.2V H
or "CMOS" Open 0.8-2.3V O
4. Two digits of 7-segment LED display Transit LO-->HI P
5. Pulse generator :
(1) Duty cycle : 50% Set mode selector switch to "CMOS" position
(2) Frequency range : 1 Hz ~ 10 Hz
10 Hz ~ 100 Hz Logic
Input Level Display
100 Hz ~ 1K Hz Level
1K Hz ~ 10K Hz LO <30%+VDC ±10% L
10K Hz ~ 100K Hz HI >70%+VDC ±10% H
100K Hz ~ 1M Hz Open 30%~70%+VDC O
(3) Amplitude : 0 ~ 10Vpp Transit LO-->HI P
(4) TTL/CMOS mode output
TTL : + 5V
CMOS : +VDC (depends on the + VDC output) Memory : The two points besides 7 segment LED display will keep
6. Eight bits LED display : lighting while in "level transition"(LO --> HI or HI--> LO)
Set mode selector switch to "TTL" position 10. Universal connector : (optional)
It reserves fixed holders on the panel in order to be connected
with various connectors, for example :
Logic Standard accessory :
Input Level Display light up
Level ● UC-02 RS-232 D connector (25 pin female & male)
Optional accessories :
LO <0.8±0.2V Green ŸUC-01 : Card edge connector 2.54 mm 62 pin
HI >2.3±0.2V Red
ŸUC-03 : Straight header 60pin
Open 0.8-2.3V No display
ŸUC-04 : Card edge connector 3.96 mm 56 pin
11. Other standard accessories :
ŸPower code
Set mode selector switch to "CMOS" position
ŸTest probe
ŸPin : 6pcs
Logic ŸUser manual
Input Level Display light up
Level 12. Dimension :
325 x 250 x 95 mm (L x W x H)
LO <30%+VDC ±10% Green 13. Weight : 4.3kg
HI >70%+VDC ±10% Red
Open 30%~70%+VDC No display