Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
html
MASTER BUSHING
The 37 1/2" MPCH is a Pin Drive Hinged Master Bushing specially designed for floating and semi-submersible drilling operations.
With insert bowl No. 3 and optional insert bowls No. 1 and No. 2, the MPCH will handle tubulars from 2 3/8" to 13 3/8" OD. Unit comes complete with No. 3 insert bowl, bit
breaker adapter plate and lifting sling.
Weight complete 4200 lbs (1905 kg); body only 3200 lbs (1452 kg).
17 1/2" and 20 1/2" Medium Duty Pin Drive Split Master Bushing are designed for shal low to medium depth service.
Extended API Taper
The MDSP Master Bushings have an extended APT taper in the bowls that provides 50 % more slip support than do square drive bushings.
Varco SDML slips, used in the MDSP master bushing are a proven combination that can handle drilling to 15,000 feet.
Note : Varco BJ does not recommend using split master bushings in rotary tables with more than 3/16" (5 mm) wear in the rotary table bore. Rebuild rotary bore or purchase a
solid type bushing.
Units come complete with bit breaker, adapter plate and lifting sling.
MSP 27 1/2" Split Pin Drive Bushings are also available. With the larger rotary opening the standard No. 3 Extended API taper is used. This allows the use of extra-long SDXL slips
required for heavier loads. Weight 1600 lbs (726 kg).
The 20 1/2" thru 27 1/2" MSPC is a solid Body Pin Drive Master Bushing designed for all drilling operations. The pin drive allows the kelly
bushing to ride on top of the rotary table and permits extended bowls to be used for better slip back up. With the extended API insert bowl
No. 3, the MSPC will handle tubulars from 2 3/8" to 13 3/8".
Unit comes with No. 3 insert bowl, bit breaker adapter plate and lifting sling.
For Rotary Table Size MSPC Weight lbs (kg):
MSPC Parts
20 1/2 & 21 23 27 1/2
Name of part Qty Weight Weight Weight
P/N P/N P/N
lb kg lb kg lb kg
Insert Bowl No.3 (split) extended 1 1809 464 210 1810 620 281 1810 620 281
API
Eccentric Pin 2 1013 1 0.5 1014 2 0.9 1014 2 0.9
Lock 2 1811 1 1/2 0.7 1016 3 1 1016 3 1
Retaining pin for Lock Pin 2 1028 1/4 0.1 1018 - - 1030 - -
Drive Hole Bushings 4 1813 3 1/2 2 1814 7 3 1814 7 3
Lifting Sling 1 1021 40 18 1021 40 18 1021 40 18
Bit Breaker Adapeter Plate 1 1815 137 62 1816 220 100 1816 220 100
17 1/2 thru 27 1/2 Solid Body Square Drive Master Bushing is designed for all drilling opetions. A 4 inch deep recess accommodates a square drive kelly bushing. Developed for
use when a 10,000 ft well was considered deep, the MSS still serves a useful purpose where a large slip backup area is not required. With the extended API insert bowl No.3,
the MSS will handle 2 3/8 thru 8 5/8 inch OD Drill pipe, drill collars, tubings, and casing. Insert bowl No.2 can handle tubular goods 9 5/8 and 10 3/4 inches OD. The MSS design,
with its solid body, retains the correct API taper for medium and short rotary slips (Varco's SDML and SDS) under all load conditions. These slips receive correct backup and hold
tubulars uniformly. The solid outer body takes all transverse loads and provides proper backing for the split inserts bowls allowing the rotary table to rotate freely, unipaired by
transverse loads.
MSS Parts
R. Table
Name of parts Qty
17 1/2 20 1/2 & 21 22 & 23 27 1/2
Insert Bowl (API) Split 1 1011 1011 1011 1022
Lock Pin 2 1033 1014 1014 -
Lock 2 1015 1016 1016 -
Retaining Pin for Lock Pin 2 1017 1018 1029 -
Liffting Sling Assy 1 1021 1021 1021 1021
Insert Bowl No.1 (split) for 13 3/8 & 11 3/4 OD casing - - - 2002
Insert Bowl No.2 (Split) for 10 3/4 & 9 5/8 OD casing - - - 1026
Insert Bowl No.1 (split) extended API for 8 5/8 OD and samller 1024 1024 1024 1025
Bit Breaker Adapter Plate locates in the Master Bushing drive pin holes and provides a 13 9/16 inch square to accommodate bit Breakers.